Organizations providing home care services are inclined to optimize their activities in order to meet the constantly increasing demand for home care. In this context, home care providers are confronted with multiple, often conflicting, objectives such as minimizing their operating costs while maximizing the service level offered to their clients by taking into account their preferences. This paper is the first to shed some light on the trade-off relationship between these two objectives by modeling the home care routing and scheduling problem as a bi-objective problem. The proposed model accounts for qualifications, working regulations and overtime costs of the nurses, travel costs depending on the mode of transportation, hard time windows, and client preferences on visit times and nurses. A distinguishing characteristic of the problem is that the scheduling problem for a single route is a biobjective problem in itself, thereby complicating the problem considerably. A metaheuristic algorithm, embedding a large neighborhood search heuristic in a multi-directional local search framework, is proposed to solve the problem. Computational experiments on a set of benchmark instances based on reallife data are presented. A comparison with exact solutions on small instances shows that the algorithm performs well. An analysis of the results reveals that service providers face a considerable trade-off between costs and client convenience. However, starting from a minimum cost solution, the average service level offered to the clients may already be improved drastically with limited additional costs. (authors' abstract)

Self-adaptivity, characterized by the ability to dynamically adjust behavior at runtime, is a growing trend in the evolution of modern embedded systems. While self-adaptive systems tend to be flexible and autonomous, self-adaptivity may inevitably complicate software design, test and analysis. A strategy for taming the growing software complexity of self-adaptive systems is to partition system behaviors into different operational modes specified at design time. Such a multi-mode system can change behavior by switching between modes at runtime under certain circumstances. Multi-mode systems can benefit from a complementary approach to the software development of complex systems: Component-Based Software Engineering (CBSE), which fosters reuse of independently developed software components. However, the state-of-the-art component-based development of multi-mode systems does not take full advantage of CBSE, as reuse of modes at component level is barely addressed. Modes are often treated as system properties, while mode switches are handled by a global mode manager. This centralized mode management entails global information of all components, whereas the global information may be inaccessible in component-based systems. Another potential problem is that a single mode manager does not scale well, particularly at design time,  for a large number of components and modes.   In this thesis we propose a distributed solution to the component-based development of multi-mode systems, aiming for a more efficient and scalable mode management. Our goal is to fully incorporate modes in software component reuse, supporting reuse of multi-mode components, i.e., components able to run in multiple modes. We have developed a generic framework, the Mode-Switch Logic (MSL), which not only supports reuse of multi-mode components but also provides runtime mechanisms for handling mode switch. MSL includes three fundamental elements: (1) a mode-aware component model with the formal specification of reusable multi-mode software components; (2) a mode mapping mechanism for the seamless composition of multi-mode components; and (3) a mode-switch runtime mechanism which is executed by each component in isolation from its functional execution and coordinates the mode switches of different components without the need of global mode information. The mode-switch runtime mechanism has been verified by model checking in conjunction with mathematical proofs. We also provide a mode-switch timing analysis for the runtime mechanism to respect real-time requirements.   MSL is dedicated to the mode aspect of a system irrespective of component execution semantics, thus independent of the choice of component models. We have integrated MSL in the ProCom component model with the extension of support for reuse of multi-mode components and distributed mode-switch handling. Although the distributed mode-switch handling of MSL is more flexible and scalable than the conventional centralized approach, when components are deployed on a single hardware platform and global mode information is available, centralized mode-switch handling is more efficient in terms of runtime overhead and mode-switch time. Hence, MSL is supplemented with a mode transformation technique to enhance runtime mode-switch efficiency by converting the distributed mechanism to a centralized mechanism. MSL together with the mode transformation technique has been implemented in a prototype tool where one can build multi-mode systems by reusing multi-mode components. The applicability of MSL is demonstrated in two proof-of-concept case studies. / ARROWS - Design Techniques for Adaptive Embedded Systems

Published Article / To enable meaningful and consistent communication between different software systems in a particular domain (such as manufacturing, law or medicine), a standardised vocabulary and communication language is required by all the systems involved. Concepts in the domain about which the systems want to communicate are formalized in an ontology by establishing the meaning of concepts and creating relationships between them. The inputs to this process in found by analysing the physical domain and its processes. The resulting ontology structure is a computer useable representation of the physical domain about which the systems want to communicate. To enable the long term persistence of the actual data contained in these concepts and the enforcement of various business rules, a sufficiently powerful database system is required. This paper presents the design of a manufacturing ontology and its accompanying relational database schema that will be used in a manufacturing test domain.

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / As part of the iNET Team’s plan to demonstrate to the validity and benefits of adding a network connection to a test vehicle, Wyle Laboratories Telemetry and Data Systems is developing a network-based command structure that allows ground-based users to request data previously archived on-board a test article in response to real-time data monitoring. This synthesis of real-time telemetry monitoring with traditional ground-based post-test data analysis provides flight test engineers with near real-time, error free data while the aircraft is on station. Additionally, this approach maximizes the use of available telemetry bandwidth by allowing users to dynamically request different data sets for downloading. This paper addresses the command structure of the interface; the utilization of IRIG 106 Chapter 10 data structures in a network environment, and provides performance metrics of the test case.

The study aimed to explore and describe the experiences of people treated for multidrug resistant tuberculosis (MDR-TB) in Omaheke region, Namibia in order to make relevant recommendations regarding their management. A descriptive qualitative design approach was used. Data was collected using in-depth individual interviews with six participants. The interview transcripts were analysed using thematic content analysis. Three themes emerged namely (1) Stressors related to MDR-TB diagnosis and treatment which involved nature of disease and compulsory hospitalisation (2) Impact of being treated for MDR-TB which related to emotional , social , spiritual and financial impact (3) Support structures for people treated for MDR-TB which included family members, health care professionals and friends. Systemic practical patient-centred, staff-centred and community-centred recommendations are suggested as well as recommendations for future research and an appraisal of the limitations of this study. / Health Studies / M.A. (Public Health)

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Several navigation technologies exist, which can facilitate the generation of Time Space Positioning Information (TSPI) in urban environments. These include GPS, image-based localization, radio-based localization and dead reckoning. This paper first presents a basic overview of these techniques including advantages and limitations of each. We present an approach to localization in urban environments, based on environment learning and collaborative navigation using multiple homogeneous and non-homogeneous localization technologies, fused to form a multi-sensor system.

Allegory is not obsolete as Samuel Coleridge and Johann Wolfgang von Goethe have claimed. It is alive and well and has transformed from a restrictive concept to a concept that is flexible and can form to meet the needs of the author or reader. The most efficient way to evidence this is by making a case study of it with a suitable work that will allow us to perceive its plasticity. This essay uses J.R.R. Tolkien’s The Lord of the Rings as a multi-perspective case study of the concept of allegory; the size and complexity of the narrative make it a suitable choice. My aim is to illustrate the plasticity of allegory as a concept and illuminate some of the possibilities and pitfalls of allegory and allegoresis. As to whether The Lord of the Rings can be treated as an allegory, it will be examined from three different perspectives: as a purely writerly process, a middle ground of writer and reader and as a purely readerly process. The Lord of the Rings will then be compared to a series of concepts of allegorical theory such as Plato’s classical “The Ring of Gyges”, William Langland’s classic The Vision of William Concerning Piers the Plowman and contemporary allegories of racism and homoeroticism to demonstrate just how adaptable this concept is. The position of this essay is that the concept of allegory has changed over time since its conception and become more malleable. This poses certain dangers as allegory has become an all-round tool for anyone to do anything that has few limitations and has lost its early rigid form and now favours an almost anything goes approach.

International Telemetering Conference Proceedings / November 04-07, 1991 / Riviera Hotel and Convention Center, Las Vegas, Nevada / The Multi-Stream Data-Driven Telemetry System (MSDDTS) is a new generation system in China developed by Beijing Research Institute of Telemetry (BRIT) for high bit rate, multi-stream data acquisition, processing and display. Features of the MSDDTS include: .Up to 4 data streams; .Data driven architecture; .Multi-processor for parallel processing; .Modular, Configurable, expandable and programmable; .Stand-along capability; .And, external control by host computer. This paper addresses three very important aspects of the MSDDTS. First, the system architecture is discussed. Second, three basic models of the system configuration are described. The third shows the future development of the system.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / This paper presents one new type CDMA multi-signal receiving protocol, which is suitable for satellite mobile communication systems. Then it gives the principle analysis and describes the realization of this protocol. Meanwhile, it gives the software protocol implementation scheme. From the long point of view, it will more increase the system flexibility, which is easier to update; and will solve the interoperability and integration application problems. Finally, the simulation results conclude that software implementation of CDMA multi-signal receiving in satellite mobile communication system is feasible, and it may be used in other wireless communication systems.

Identification based recommender systems make no distinction between users and accounts; all the data collected during account sessions are attributed to a single user. In reality this is not necessarily true for all accounts; several different users who have distinct, and possibly very different, preferences may access the same account. Such accounts are identified as multi-user accounts. Strangely, no serious study considering the existence of multi-user accounts in recommender systems has been undertaken. This report quantifies the affect multi-user accounts have on the predictive capabilities of recommender system, focusing on two popular collaborative filtering algorithms, the kNN user-based and item-based models. The results indicate that while the item-based model is largely resistant to multi-user account corruption the quality of predictions generated by the user-based model is significantly degraded. / text