The master’s thesis focuses on the machining of a chosen gearbox on a CNC machine. The theoretical part deals with gearboxes in general and the aluminium alloy from which a selected gearbox is manufactured. In the practical part, the machining of the gearbox is proposed according to the corresponding drawing. Gradually suitable machines are selected, then depending on their limits, clamping devices are designed, next a set of tools is selected and an NC program is generated. The technological process of production is proposed and the basic production costs are calculated.

Tato diplomová práce byla vypracována v průmyslovém kontextu, během stáže ve firmě Metso. Zlepšení obráběcího procesu zajišťovacích šroubů bylo cílem této práce, aby byla umožněna budoucí automatizace zakládání obrobku do stroje. Zlepšení bylo zhodnoceno na základě úrovně autonomie během obrábění, eliminace neprogramovaných zastavení stroje operátorem a dostačujícího odvodu třísek. Implementace automatických systému do číslicově řízeného obráběcího centra umožňuje zvýšení produktivity. Před automatizováním obráběcího procesu však musí být proces optimalizován. Zejména dostatečná fragmentace třísek a jejich evakuace jsou klíčové. Dlouhé nedělené třísky můžou poškodit systémy jako například automatický měnič nástrojů, dopravník třísek nebo průmyslového robota. Dostatečná lámavost třísek může být zaručena správným výběrem technologie a strategie obrábění, výběrem řezného nástroje a řezných podmínek pro daný materiál obrobku.

My thesis is aimed at the application of wire electical discharge machining technology in the production of woodworking tools. All of this in the conditions of Vydona company. There is a theory of machining method plus a well-aranged division of cutter tools for wood in the introduction. The practical part describes in detail the procedur of cutting shaped plate out of tungsten carbide. As a result of the technical and at the same time the economic evaluation is an establishment of hourly rate for machine.

This diploma thesis deals with trends of the development of machine tools, and focuses on technologies and machine tools for manufacturing of pressing dies and on manufacturing of cavity of moulds. First, the existing state in the field of these technologies is described and defined, and subsequently, the dissertation concentrates on modern conceptions of this manufacturing.

Valorization and analysis of machining technology for the production of aluminium part and consecutively project optimization part production. New advanced cutting tools selection and application of new technologies. The adjustment and simplification of the existing NC program for given CNC machining centre and its final debugging. In the final part, there is an economical and technical evaluation of firm benefits and recommendations into production.

This thesis describes the complete technology solution of front driving axle console production by machining. The console is part of the self-supporting structure of the tractor and is produced under conditions of large engineering company. Introduction describes the prduction technology of component. The main part is devoted to the technological process of production and selection of appropriate cutting tools. Technical and economical evaluation of machined part is mentioned in the conclusion of thesis.

This master´s thesis deals with unconventional technology of wire electrical discharge machining. There are described the principles and essence of electrical discharge machining and the principles related to wire electrical discharge machining with emphasis on the application of this technology in terms of medium-sized engineering company. There is also described the complete assembly of technolgy wire cutting and machining on wire cutter Excetek V 650. Then in the work there are statistically evaluated parameters precision machined surfaces, specifically to the belt pulley 116-8M-130. At the end of the work there is the technical-economic evaluation that addresses the hourly cost of machining on wire cutter Excetek V 650.

The Diploma thesis deals with the design solution of multi-functional machining centre, especially with one of its parts – the design of the slide ram and vertical feed incl. the choice of convenient tool heads for the slide ram. The introducing part deals with the numerically controlled machines and centres generally, especially with the portal-type ones. It contains description of individual machine parts including examples of accessories from product plans of domestic and foreign producers. The second part of the Diploma thesis contains calculations and design solution of the slide ram and feed including the choice of the most suitable accessories applicable for this purpose. In the final phase the model of the slide ram has been introduced in the imersion virtual reality and integrated in the complete machine design. The Diploma thesis has been elaborated using the relevant technical literature.

This Master's thesis deals with the issue of high-speed turning of the 100Cr6 material. The aim is to identify and experimentally validate an innovative production process for a particular component. The thesis includes theoretical basis of high-speed machining, analysis of the current state of the manufacturing process, innovation design and experimental verification. At the end of the thesis, parameters of the machined surfaces of specimens are evaluated.

L’usinage 5 axes à grande vitesse est de plus en plus utilisé dans l’industrie pour réaliser des pièces de géométrie complexe à forte valeur ajoutée avec pour contrainte de respecter la qualité géométrique tout en maximisant la productivité. Dans ce contexte, la FAO et plus particulièrement la génération des trajectoires d’usinage jouent un rôle prépondérant. Ces travaux proposent de définir des trajectoires en fonction de la pièce à réaliser mais aussi de la structure poly articulée et de ses performances cinématiques. La grande diversité des structures en termes d’architecture et de cinématique impose une méthode de calcul générique facilitant la définition de trajectoires adaptées pour leur suivi. L’état de l’art des travaux réalisé dans les domaines de l’usinage et de la robotique pour répondre à cette problématique conduit à utiliser des polytopes de manipulabilité cinématique pour modéliser les contraintes cinématiques. L’analyse de ces polytopes et de la géométrie de la pièce à usiner permet de générer des trajectoires avec une vitesse outil/pièce maîtrisée et un temps de parcours réduit dans le cas de l’usinage 5 axes positionné et de l’usinage 5 axes continu. Ce formalisme met en avant les fortes dépendances entre les différents paramètres de la stratégie d’usinage (positionnement de la pièce, direction d’avance et orientation de l’outil) et permet de privilégier certaines combinaisons de ces paramètres pour maîtriser la vitesse d’exécution de la trajectoire. / 5 axes high speed milling is increasingly used for manufacturing high addedvalue parts with complex forms in order to respect surface quality while maximizing productivity. In this context, CAM and more specifically toolpath computations play a major part. This work proposes to define toolpath depending on the workpiece but also onkinematical capacities of the polyarticulated structure.The large variety of structure in terms of architecture and kinematic enforce a generic calculation method to simplify adaptative toolpath generation. A state of the art realized in machining and robotics proposes to investigate the use of kinematical manipulability polytopes to represent kinematical capacities. An analysis of the polytopes and of the workpiece allows to generate toolpaths with a controlled feedrate and a decreasing time in 5 axes positionned milling and in 5 axes continous milling. This formalism highlights strong interactions between milling strategy parameters (workpiece setup, feed direction, tool orientation) and allows to prioritize specific parameters mix to have a controlled execution feedrate.