No description available.

No description available.

Nous avons étudié le couplage dépliement-transport de la Maltose Binding Protein (MBP ou MalE), une protéine périplasmique d'E. Coli et d'un mutant instable, le MalE219, en fonction de la concentration d'un agent dénaturant, le chlorure de guanidium (GdnHCl) à l'échelle de la molécule unique. La technique utilisée est basée sur la détection électrique du transport de macromolécules à travers un nanopore protéique (l'Aérolysine d'Aeromonas Hydrophila) inséré dans une bicouche lipidique plane. Les résultats obtenus ont été comparés à ceux obtenus lors d'une précédente étude réalisée à travers un autre nanopore protéique, l'alpha-hémolysine du Staphylocoque doré, de géométrie et de charge nette différente. Nous avons montré l'existence de temps courts et longs de blocage du courant associés à des protéines dépliées ou partiellement repliées. La fréquence des blocages du courant permet d'obtenir la fraction de protéine dépliée passant à travers le pore en fonction de la concentration en GdnHCl. Les courbes de dénaturation obtenues avec les deux pores montrent un comportement sigmoïdale très similaire. Le type de pore n'influence donc pas la dénaturation des protéines, mais uniquement leur dynamique de transport. En revanche, la courbe de dénaturation du mutant instable présente un déplacement vers les concentrations plus faibles en GdnHCl. Il a été montré également que la présence du maltose comme ligand sur le MalE219 stabilise nettement sa structure. Pour La MBP, les temps de blocages longs diminuent avec l'augmentation de la concentration de GdnHCl montrant une dynamique de transition vitreuse . Cette technique est appropriée à l'étude du dépliement et des changements de conformation de protéines, mais ne permet pas d'obtenir des informations structurales sur les états intermédiaires de repliement. Ainsi, la spectroscopie RMN a été utilisée pour tenter de caractériser ces états intermédiaires de repliement, notamment par la méthode d'échange proton-deutérium. Elle consiste à suivre les cinétiques d'échange des résidus de la protéine sur des spectres 2D 1H-15N HSQC à différentes concentrations de GdnHCl.Ainsi 180 résidus sur les 370 que compte la MBP ont été suivis lors de la dénaturation en présence de GdnHCl. Les deux hélices en C-terminal sont très accessibles au solvant et se dénaturent facilement. La MBP est composée de deux domaines globulaires, le domaine N-ter et le domaine C-ter. Les éléments de structures secondaires situés dans la zone intermédiaire entre les deux domaines (principalement des brins β) sont particulièrement affectés par l'agent dénaturant. D'autres structures secondaires dans les domaines globulaires sont très protégées et plutôt stables. Il est donc proposé que les protéines partiellement dépliées s'insèrent dans le pore par l'extrémité C-terminal et que des parties de structuration tertiaire restent stable entraînant le blocage du pore. / We study the unfolding-transport mechanism of the Maltose Binding Protein (MBP or MalE), a periplasm protein of E. Coli and a destabilised variant, the MalE219, as the function of the concentration of denaturing agent, Guanidine Hydrochloride(GdnHCl) at the single molecule level. The technique is based on the electrical detection of the macromolecule transport through a nanometer-scale channel, Aerolysin channel, inserted into a planar lipid bilayer. Results obtained were compared to previous data with another channel, the alpha-Hemolysin. Both channels have different geometry and net charge.We show that we can distinguish unfolded states from partially folded ones with aerolysin pore.Unfolded proteins induce short current blockades, their duration is constant as a function of the concentration of denaturing agent. Partially folded proteins exhibit long blockades whose life times decrease as the concentration of GdnHCl increase, this indicates a possible glassy dynamics.The frequency of the short current blockades increases as the concentration of denaturing agent increases, following a sigmoidal denaturation curve.The unfolding curve of native MBP with Aerolysin pore is similar to the one previously measured with Hemolysin channel. The denaturation curve of the destabilized variant obtained with Aerolysin is shifted towards lower value of GdnHCl concentration in agreement with bulk measurements. We show also that the addition of maltose stabilizes the structure of MalE219. This nanopore recording technique is also suitable for the study of unfolding and conformation changes of proteins.In order to obtain structural informations that nanopore recording cannot provides, the structure of MBP along its denaturation curve was studied by NMR spectroscopy. The Hydrogen-exchange method known to be sensitive to folding intermediates was specially used. It consists in tracking hydrogen-deuterium exchange rates for amino on the 2D 1H-15N HSQC spectra.Thus, 180 residus of 370 for MBP was followed during denaturation in the presence of GdnHCl. The two last helices in C-terminal of MBP are accessible to the solvent and are denaturated easily. MBP is a two domains protein, N-ter domain and C-ter domain. It was found out that the C- and D-domain of MBP (mainly alpha-helices) could be relatively stable in presence of denaturing agent and that beta strands which make the link between the two domains would be affected by the denaturing agent. It was proposed that partially unfolded proteins enter the pore by the C-terminal end and that stable tertiary structure still present block the pore.

Chapter 1gives a general introduction to the CXXC motif found in natural proteins. It then reviews the studies where disulphides were engineered in various proteins. The various strategies developed to engineer metal binding activity and redox activity are described. The objectives behind engineering the CXXC motif into a protein, such as imparting it novel metal-binding and redox activities, are discussed next. Alternative strategies which achieve the same objectives are described as well. This chapter then introduces the model proteins used in the course of this thesis: maltose-binding protein (MBP) and E. coli. Thioredoxin (Trx). This chapter also briefly discusses the role of signal peptide in protein export. Chapter 2describes the experimental studies and their results in which we introduced the widely occurring cysteine motif CXXC into the maltose binding protein (one-at-a-time, in five alpha-helices, at the N-termini) to test three hypotheses: 1) Does a disulphide bond form at the N-terminus? 2) Does the protein acquire any oxido-reductase activity? 3) Does it acquire new metal-binding properties? The results confirmed: 1) Each cysteine pair forms a stable intrahelical disulphide bond under non-reducing conditions. 2) The five mutant proteins acquire considerable oxidoreductase activity, tested by the insulin aggregation assay. 3) The mutants acquire novel metal-binding properties for Ni2+, Cd2+, and Zn2+ upon reduction. Further, introducing the CXXC motif neither destabilizes the protein nor affects its global structure. Our results demonstrated that introduction of CXXC motifs can be used to probe alpha-helix start sites and to introduce oxidoreductase and metal binding functionality into proteins. Chapter 3describes further experimentson a few of the metal ion binding mutants discussed in the previous chapter. We explore the effect and usefulness of reducing agents (DTT and TCEP) on the binding of metal salts to the CXXC mutants. We also studied the explore of metal salts on the thermal stability of the mutants and show that metal ions bind to the CXXC motif even when the protein is in the unfolded state. The chapter describes the use of an immobilized metal affinity chromatography (IMAC) based method for the purification of MBP mutants.Yields ranging from 60-85% were obtained for thethree MBP mutants. The cysteines were located at different positions in thesethree MBP mutants (MBP 42-45 Cys, MBP 128-131 Cys, and MBP 359-359 Cys mutants). The yields for wild-type MBP, a single cysteine mutant (MBP S211C), a double cysteine mutant (MBP 230, 30) were all below 15%. Chapter 3 also reports a new crystal structure of the MBP356-359 mutant in ligand bound form:it crystallizes as an intermolecular dimer, bonded by two disulfides formed by the cysteines of the CXXC motif. Chapter 4describes the effects of inserting signal peptide sequences on protein folding and expression. We fused the malE and pelB signal sequences at the N-terminus of the model protein thioredoxin and observed that the wild-type and pelB fusion constructs are soluble when expressed, but the malE construct was targeted to inclusion bodies. Nonetheless, it could be refolded in vitro to yield a monomeric product with a secondary structure identical to the wild-type thioredoxin. This chapter also details the thermodynamic stability, aggregation propensity and activity of the purified recombinant proteins in comparison with the wild-type thioredoxin. The presence of the signal sequences reduces the thermodynamic stability and activity of the recombinants and increases their aggregation propensity, with malE having much larger effects than pelB. These studies show that besides acting as address labels, different signal sequences affect protein stability and aggregation differently. Chapter 5describes three different strategies to label a protein at different sites with cysteine-specific fluorophores using MBP as the model. The first strategy exploits the differential accessibility of residues within MBP in its maltose-bound and maltose-free states. The second strategy involves insertion of a 14-amino-acid loop called V3 from the HIV gp120 protein into MBP; anti-V3 antibodies shield the cysteine residue present inside the inserted loop, while we label another cysteine present outside the loop. In the third strategy, we introduce a third cysteine residue onto the background of the MBP mutant already containing a disulphide bridge at the N-terminus of one of its helices (discussed in Chapter 2). We label the third, free cysteine while the cysteines involved in the disulphide bridge remain protected. We observed successful differential labelling using the first strategy and also observed FRET between the fluorophore labels. Similarly, after trying the second strategy we could individually label all the mutants except one. The third strategy based on the triple-cysteine mutant was not successful because the fluorophore we chose (DBM) did not show site specificity and instead labelled all three cysteines. In addition, the triple-cysteine mutant did not even show disulphide-bridge formation.We showed that indeed the V3 loop inserted in MBP binds anti-V3 antibodies and we could individually label all the mutants expect D41C. The third strategy was not successful because unfortunately in the triple cysteine mutant, the fluorophore we chose (DBM) did not show site specificity and labeled all three cysteines. In addition, the disulfide bridge was not found to be present in the triple cysteine mutant. Chapter 6discusses the synthesis, characterization and binding of various maltolipids, (and their corresponding maltose-free controls) to MBP. The maltolipids were synthesised with varying linker lengths and anchor- & head-groups and then used to prepare liposomes and micelles. Although both liposomal and micellar forms could bind to MBP, only the micelles were screened subsequently for their ability to bind to MBP. The binding was assessed using various techniques such as fluorescence spectroscopy, gel filtration and thermal stability assay. We screened the maltolipids and determined how their anchor group, linker length and charge on the head group influences the binding of MBP to micelles formed by these maltolipids.

<p>Sarcoptes scabiei is a disease-causing parasitic mite of humans and animals that is prevalent worldwide. The parasite lives in burrows in the epidermis of its host. These burrows are formed by a combination of mechanical destruction by the mite and secretion of various factors.</p><p>The enzyme superoxide dismutase (SOD) catalyzes the dismutation of superoxide into oxygen and hydrogen peroxide. As such, it is an important antioxidant defense in nearly all cells exposed to oxygen. In this project, the enzyme was expressed in transformed Escherichia coli cells. The SOD cDNA from S. scabiei was ligated into two different expression vectors: pPU16 and pET-14b. The S. scabiei SOD open reading frame reported here is 696 nucleotides long and yields a protein with a molecular weight of  69.5 kDa. Only one of the constructs was successfully created, using pPU16. The construct was designated pPU110 and has a sequence coding for a hexahistidine tag downstream of the SOD cDNA and has a sequence coding for the maltose binding protein (MBP) upstream.</p><p>The expression plasmid pPU110 was verified by DNA-sequencing and the tested in different expression experiments. Analysis using SDS-PAGE showed that recombinant fusion SOD could be readily expressed in E.coli.</p>

Sarcoptes scabiei is a disease-causing parasitic mite of humans and animals that is prevalent worldwide. The parasite lives in burrows in the epidermis of its host. These burrows are formed by a combination of mechanical destruction by the mite and secretion of various factors. The enzyme superoxide dismutase (SOD) catalyzes the dismutation of superoxide into oxygen and hydrogen peroxide. As such, it is an important antioxidant defense in nearly all cells exposed to oxygen. In this project, the enzyme was expressed in transformed Escherichia coli cells. The SOD cDNA from S. scabiei was ligated into two different expression vectors: pPU16 and pET-14b. The S. scabiei SOD open reading frame reported here is 696 nucleotides long and yields a protein with a molecular weight of  69.5 kDa. Only one of the constructs was successfully created, using pPU16. The construct was designated pPU110 and has a sequence coding for a hexahistidine tag downstream of the SOD cDNA and has a sequence coding for the maltose binding protein (MBP) upstream. The expression plasmid pPU110 was verified by DNA-sequencing and the tested in different expression experiments. Analysis using SDS-PAGE showed that recombinant fusion SOD could be readily expressed in E.coli.

The E. coli maltose binding protein (MBP) has been utilized as a translational fusion partner to improve the expression of foreign proteins made in E. coli. When located N -terminal to its cargo protein, MBP increases the solubility of intracellular proteins and improves the export of secreted proteins in bacterial systems. We initially explored whether MBP would have the same effect in the methylotrophic yeast Pichia pastoris , a popular eukaryotic host for heterologous protein expression. When MBP was fused as an N -terminal partner to several C -terminal cargo proteins expressed in this yeast, proteolysis occurred between the two peptides, and MBP reached the extracellular region unattached to its cargo. However, in two of three instances, the cargo protein reached the extracellular region as well, and its initial attachment to MBP enhanced its secretion from the cell. Extensive mutagenesis of the spacer region between MBP and its C -terminal cargo protein could not inhibit the cleavage although it did cause changes in the protease target sites in the fusion proteins, as determined by mass spectrometry. Taken together, these results suggested that an uncharacterized P. pastoris protease attacked at different locations in the region C -terminal of the MBP domain, including the spacer and cargo regions, but the MEP domain could still act to enhance the secretion of certain cargo proteins. The attempt to identify the unknown protease was unsuccessful. However, in contrast to other fusion partners, MBP was secreted with the cargo when it was fused as a C -terminal peptide to an N -terminal cargo protein. These studies provide insights into the role of proteases and fusion partners in the secretory mechanism of P. pastoris , suggesting new strategies to optimize this expression system.

Kinesins are molecular motors that transport intracellular cargos along microtubules (MTs) and influence the organization and dynamics of the MT cytoskeleton. Their force-generating functions arise from conformational changes in their motor domain as ATP is bound and hydrolyzed, and products are released. In the budding yeast Saccharomyces cerevisiae, the Kar3 kinesin forms heterodimers with one of two non-catalytic kinesin-like proteins, Cik1 and Vik1, which lack the ability to bind ATP, and yet they retain the capacity to bind MTs. Cik1 and Vik1 also influence and respond to the MT-binding and nucleotide states of Kar3, and differentially regulate the functions of Kar3 during yeast mating and mitosis. The mechanism by which Kar3/Cik1 and Kar3/Vik1 dimers operate remains unknown, but has important implications for understanding mechanical coordination between subunits of motor complexes that traverse cytoskeletal tracks. In this study, we show that the opportunistic human fungal pathogen Candida albicans (Ca) harbors a single version of this unique form of heterodimeric kinesin and we present the first in vitro characterization of this motor. Like its budding yeast counterpart, the Vik1-like subunit binds directly to MTs and strengthens the MT-binding affinity of the heterodimer. However, in contrast to ScKar3/Cik1 and ScKar3/Vik1, CaKar3/Vik1 exhibits weaker overall MT-binding affinity and lower ATPase activity. Preliminary investigations using a multiple motor motility assay indicate CaKar3/Vik1 may not be motile. Using a maltose binding protein tagging system, we determined the X-ray crystal structure of the CaKar3 motor domain and observed notable differences in its nucleotide-binding pocket relative to ScKar3 that appear to represent a previously unobserved state of the active site. Together, these studies broaden our knowledge of novel kinesin motor assemblies and shed new light on structurally dynamic regions of Kar3/Vik1-like motor complexes that help mediate mechanical coordination of its subunits. / Thesis (Master, Biochemistry) -- Queen's University, 2012-02-29 17:15:03.654

No description available.

Le gène de l’entérotoxine thermostable b (estB) d’Escherichia coli a été fusionné au gène de la protéine liant le maltose (malE) dans le vecteur pMAL-p via PCR. Par la suite, deux constructions plasmidiques ont été realisées à partir de ce nouveau vecteur, nommé pMAL-STb. Dans un premier temps, un marqueur hexahistidine (His6) a été ajouté entre malE et estB, et dans un deuxième temps, un marqueur décahistidine (His10) a été placé en amont de malE. La séquence signal de la protéine liant le maltose (MBP) dirige l’exportation de la protéine de fusion du cytoplasme vers le périplasme, où l’entérotoxine STb acquière sa conformation active. MBP est également reconnue pour améliorer le rendement et la solubilité de la protéine passagère tandis que le marqueur histidine, connu comme étant le meilleur marqueur d’affinité pour la purification protéique, facilite sa purification jusqu’à homogénéité. De plus, les gènes fusionnés sont sous le contrôle du promoteur tac (Ptac), un promoteur fort et inductible. Suite à l’induction par l’IPTG, la souche recombinante exprime une protéine d’environ 48 kDa, qui est facilement identifiable par électrophorèse à partir du surnageant obtenu via choc osmotique. Une séquence encodant un site de clivage spécifique au facteur Xa est présente dans le plasmide afin de séparer les marqueurs MBP et histidine de STb. Le clivage de la protéine de fusion avec le facteur Xa libère MBP (42 kDa) attachée au marqueur histidine et un polypeptide de 5.2 kDa, correspondant au poids moléculaire de STb mature. Avec cette méthode, nous visons à obtenir une méthode plus efficace pour la production et la purification de STb. / The heat-stable enterotoxin b gene (estB) of Escherichia coli was fused to the gene for maltose-binding protein (malE) into the pMAL-p vector using PCR. Afterward, two plasmid constructs were realized from this new vector, named pMAL-STb. Firstly, a hexahistidine tag (His6) was added between malE and estB and secondly, a decahistidine tag (His10) was placed upstream of malE. The signal sequence of maltose-binding protein (MBP) directs the export of the fusion protein from the cytoplasm to the periplasm, where the enterotoxin STb acquires its active conformation. MBP is also known to improve the yield and solubility of the passenger protein while the histidine tag, viewed as the best affinity tag for protein purification, facilitates its purification to homogeneity. Furthermore, the fused genes are controlled by the tac promoter (Ptac), a strong inducible promoter. Following IPTG induction, the recombinant strain expressed a protein of approximately 48 kDa, which is easily identified from osmotic shock fluid following electrophoresis. A sequence encoding a factor Xa cleavage site is present in the plasmid to separate MBP and histidine tags from STb. The cleavage of the fusion protein with factor Xa generates the maltose-binding protein (42 kDa) attached to the histidine tag and a polypeptide of 5.2 kDa, corresponding to the molecular mass of mature STb. With this method, we aim at obtaining a more efficient way to produce and purify STb.