• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 122
  • 43
  • 19
  • Tagged with
  • 182
  • 167
  • 138
  • 104
  • 104
  • 104
  • 55
  • 49
  • 35
  • 35
  • 32
  • 27
  • 24
  • 18
  • 18
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Hybrid van der Waals heterostructures of zero-dimensional and two-dimensional materials

Zheng, Zhikun, Zhang, Xianghui, Neumann, Christof, Emmrich, Daniel, Winter, Andreas, Vieker, Henning, Liu, Wei, Lensen, Marga, Gölzhäuser, Armin, Turchanin, Andrey 11 December 2015 (has links) (PDF)
van der Waals heterostructures meet other low-dimensional materials. Stacking of about 1 nm thick nanosheets with out-of-plane anchor groups functionalized with fullerenes integrates this zero-dimensional material into layered heterostructures with a well-defined chemical composition and without degrading the mechanical properties. The developed modular and highly applicable approach enables the incorporation of other low-dimensional materials, e.g. nanoparticles or nanotubes, into heterostructures significantly extending the possible building blocks.
2

Hybrid van der Waals heterostructures of zero-dimensional and two-dimensional materials

Zheng, Zhikun, Zhang, Xianghui, Neumann, Christof, Emmrich, Daniel, Winter, Andreas, Vieker, Henning, Liu, Wei, Lensen, Marga, Gölzhäuser, Armin, Turchanin, Andrey 11 December 2015 (has links)
van der Waals heterostructures meet other low-dimensional materials. Stacking of about 1 nm thick nanosheets with out-of-plane anchor groups functionalized with fullerenes integrates this zero-dimensional material into layered heterostructures with a well-defined chemical composition and without degrading the mechanical properties. The developed modular and highly applicable approach enables the incorporation of other low-dimensional materials, e.g. nanoparticles or nanotubes, into heterostructures significantly extending the possible building blocks.
3

Auswahlhilfe für Materialien zur Schulwegsicherung: Unfallforschung kompakt

Gesamtverband der Deutschen Versicherungswirtschaft e. V. 26 April 2021 (has links)
Kinderunfälle im Straßenverkehr ereignen sich meistens auf dem Schulweg. Die von den Kindern zu bewältigenden Wege bei Schuleintritt und auch bei einem späteren Schulwechsel sollten vorbereitet und geübt werden. Diese Aufgabe übernehmen zumeist Familienangehörige, Pädagogen oder Polizisten. Unterstützung bieten zahlreiche Materialien zum Thema „Schulwegsicherung“. Um das passende Material aus den verschiedenen Angeboten zu finden, hat die Unfallforschung der Versicherer (UDV) in Zusammenarbeit mit der Technischen Universität Dresden (TUD) Auswahlkriterien formuliert und wissenschaftlich überprüft. Der so entstandene Kriterienkatalog erleichtert die Auswahl geeigneten Materials zur Schulwegsicherung.
4

Synthetic Two-Dimensional Materials: A New Paradigm of Membranes for Ultimate Separation

Zheng, Zhikun, Grünker, Ronny, Feng, Xinliang 07 May 2018 (has links) (PDF)
Microporous membranes act as selective barriers and play an important role in industrial gas separation and water purification. The permeability of such membranes is inversely proportional to their thickness. Synthetic two-dimensional materials (2DMs), with a thickness of one to a few atoms or monomer-units are ideal candidates for developing separation membranes. In this Progress Report, we present groundbreaking advances in the design, synthesis, processing, and application of 2DMs for gas and ion separations, as well as water desalination. After the introduction in Section 1, this report describes the syntheses, structures, and mechanical properties of 2DMs in Section 2. In Section 3, we will discuss the established methods for processing 2DMs into selective permeation membranes and address the separation mechanism and their performances. Finally, current challenges and emerging research directions, which need to be addressed for developing next generation separation membranes, are summarized in the Conclusion and Perspective.
5

Robust and tunable itinerant ferromagnetism at the silicon surface of the antiferromagnet GdRh2Si2

Güttler, Monika, Generalov, Alexander V., Otrokov, M. M., Kummer, K., Kliemt, Kristin, Fedorov, Alexander, Chikina, Alla, Danzenbächer, Steffen, Schulz, S., Chulkov, Evgenii Vladimirovich, Koroteev, Yury Mikhaylovich, Caroca-Canales, Nubia, Shi, Ming, Radovic, Milan, Geibel, Christoph, Laubschat, Clemens, Dudin, Pavel, Kim, Timur K., Hoesch, Moritz, Krellner, Cornelius, Vyalikh, Denis V. 16 January 2017 (has links) (PDF)
Spin-polarized two-dimensional electron states (2DESs) at surfaces and interfaces of magnetically active materials attract immense interest because of the idea of exploiting fermion spins rather than charge in next generation electronics. Applying angle-resolved photoelectron spectroscopy, we show that the silicon surface of GdRh2Si2 bears two distinct 2DESs, one being a Shockley surface state, and the other a Dirac surface resonance. Both are subject to strong exchange interaction with the ordered 4f-moments lying underneath the Si-Rh-Si trilayer. The spin degeneracy of the Shockley state breaks down below ~90 K, and the splitting of the resulting subbands saturates upon cooling at values as high as ~185 meV. The spin splitting of the Dirac state becomes clearly visible around ~60 K, reaching a maximum of ~70 meV. An abrupt increase of surface magnetization at around the same temperature suggests that the Dirac state contributes significantly to the magnetic properties at the Si surface. We also show the possibility to tune the properties of 2DESs by depositing alkali metal atoms. The unique temperature-dependent ferromagnetic properties of the Si-terminated surface in GdRh2Si2 could be exploited when combined with functional adlayers deposited on top for which novel phenomena related to magnetism can be anticipated.
6

High refractive index polyvinylsulfide materials prepared by selective radical mono-addition thiol–yne chemistry

Pötzsch, Robert, Stahl, Brian C., Komber, Hartmut, Hawker, Craig J., Voit, Brigitte I. 06 December 2019 (has links)
We report on a new framework for preparing high-refractive index polymeric materials which combines the selective thiol radical mono-addition to phenyl-acetylene derivatives with hyperbranched architectures. Using this strategy we have synthesized a series of linear and hyperbranched polyvinyl sulfide (PVS) materials, employing different dithiol (A₂ and A'₂) and di- and trialkyne (B and B₃) monomers. The process requires only a simple radical initiator, such as AIBN, in lieu of expensive or toxic catalysts and this chemistry produces polymers in high yield (up to 96%) and high molecular weight (up to 123 000 g mol⁻¹). The polymers are optically transparent, thermally stable (up to 420 °C) and readily form highquality films. The end group composition of the hyperbranched materials can be easily adjusted by changing the A₂/B₃ feed ratio. The sulfur incorporation and conjugation resulting from thiol–yne coupling with selective mono-addition results in materials with high refractive indices in the visible and IR region (nD = 1.68–1.75) and optical dispersions as low as 0.004. Moreover, we demonstrate that the hyperbranched architecture produces materials with better performance in terms of light reflection and chromatic dispersion compared to linear structures.
7

Hydrogen Isotope Transport and Separation via Layered and Two-Dimensional Materials

An, Yun 14 May 2021 (has links)
The enrichment of heavy hydrogen isotopes (deuterium, tritium) is required to fulfill their increasing application demands, e.g., in isotope related tracing, cancer therapy and nuclear reaction plants. However, their exceedingly low natural abundance and the close resemblance of physiochemical properties to protium render them extremely difficult to be separated. In this thesis, we investigate hydrogen isotope transport and separation via layered and two-dimensional materials. Three different theoretical challenges are undertaken in this work: (1) identification of the transported hydrogen species (proton H+ or protium H atom) inside interstitial space of layered materials (hexagonal boron nitride, molybdenum disulfide and graphite) and elucidation of their transport mechanism; (2) separation of hydron (proton H+, deuteron D+, and triton T+) isotopes through vacancy-free graphene and hexagonal boron nitride monolayers; (3) capture of the extremely rare light helium isotope (3He) with atomically thin two-dimensional materials. In the case of hydrogen transport, the essential challenges are investigation of its mechanism as well as the identification of transported particles. Regarding the case of hydron isotope separation, the essential questions are whether or not pristine graphene is permeable to the isotopes, and how quantum tunneling and topological Stone-Wales 55-77 defects affect their permeation and separation through graphene. In the last case, to capture the light helium isotope, quantum tunneling, which favors the lighter particles, is utilized to harvest 3He using graphdiyne monolayer. Our results provide novel theoretical insights into hydrogen particle transport inside the interstitial space of van der Waals materials; they uncover the mechanism of hydron isotope separation through 2D graphene and hexagonal boron nitride monolayers; and they predict the influence of pure quantum tunneling on the enrichment of 3He through graphdiyne membrane.
8

Preparation and investigation of polymer-foam films and polymer-layer systems for ferroelectrets

Fang, Peng January 2010 (has links)
Piezoelectric materials are very useful for applications in sensors and actuators. In addition to traditional ferroelectric ceramics and ferroelectric polymers, ferroelectrets have recently become a new group of piezoelectrics. Ferroelectrets are functional polymer systems for electromechanical transduction, with elastically heterogeneous cellular structures and internal quasi-permanent dipole moments. The piezoelectricity of ferroelectrets stems from linear changes of the dipole moments in response to external mechanical or electrical stress. Over the past two decades, polypropylene (PP) foams have been investigated with the aim of ferroelectret applications, and some products are already on the market. PP-foam ferroelectrets may exhibit piezoelectric d33 coefficients of 600 pC/N and more. Their operating temperature can, however, not be much higher than 60 °C. Recently developed polyethylene-terephthalate (PET) and cyclo-olefin copolymer (COC) foam ferroelectrets show slightly better d33 thermal stabilities, but usually at the price of smaller d33 values. Therefore, the main aim of this work is the development of new thermally stable ferroelectrets with appreciable piezoelectricity. Physical foaming is a promising technique for generating polymer foams from solid films without any pollution or impurity. Supercritical carbon dioxide (CO2) or nitrogen (N2) are usually employed as foaming agents due to their good solubility in several polymers. Polyethylene propylene (PEN) is a polyester with slightly better properties than PET. A “voiding + inflation + stretching” process has been specifically developed to prepare PEN foams. Solid PEN films are saturated with supercritical CO2 at high pressure and then thermally voided at high temperatures. Controlled inflation (Gas-Diffusion Expansion or GDE) is applied in order to adjust the void dimensions. Additional biaxial stretching decreases the void heights, since it is known lens-shaped voids lead to lower elastic moduli and therefore also to stronger piezoelectricity. Both, contact and corona charging are suitable for the electric charging of PEN foams. The light emission from the dielectric-barrier discharges (DBDs) can be clearly observed. Corona charging in a gas of high dielectric strength such as sulfur hexafluoride (SF6) results in higher gas-breakdown strength in the voids and therefore increases the piezoelectricity. PEN foams can exhibit piezoelectric d33 coefficients as high as 500 pC/N. Dielectric-resonance spectra show elastic moduli c33 of 1 − 12 MPa, anti-resonance frequencies of 0.2 − 0.8 MHz, and electromechanical coupling factors of 0.016 − 0.069. As expected, it is found that PEN foams show better thermal stability than PP and PET. Samples charged at room temperature can be utilized up to 80 − 100 °C. Annealing after charging or charging at elevated temperatures may improve thermal stabilities. Samples charged at suitable elevated temperatures show working temperatures as high as 110 − 120 °C. Acoustic measurements at frequencies of 2 Hz − 20 kHz show that PEN foams can be well applied in this frequency range. Fluorinated ethylene-propylene (FEP) copolymers are fluoropolymers with very good physical, chemical and electrical properties. The charge-storage ability of solid FEP films can be significantly improved by adding boron nitride (BN) filler particles. FEP foams are prepared by means of a one-step procedure consisting of CO2 saturation and subsequent in-situ high-temperature voiding. Piezoelectric d33 coefficients up to 40 pC/N are measured on such FEP foams. Mechanical fatigue tests show that the as-prepared PEN and FEP foams are mechanically stable for long periods of time. Although polymer-foam ferroelectrets have a high application potential, their piezoelectric properties strongly depend on the cellular morphology, i.e. on size, shape, and distribution of the voids. On the other hand, controlled preparation of optimized cellular structures is still a technical challenge. Consequently, new ferroelectrets based on polymer-layer system (sandwiches) have been prepared from FEP. By sandwiching an FEP mesh between two solid FEP films and fusing the polymer system with a laser beam, a well-designed uniform macroscopic cellular structure can be formed. Dielectric resonance spectroscopy reveals piezoelectric d33 coefficients as high as 350 pC/N, elastic moduli of about 0.3 MPa, anti-resonance frequencies of about 30 kHz, and electromechanical coupling factors of about 0.05. Samples charged at elevated temperatures show better thermal stabilities than those charged at room temperature, and the higher the charging temperature, the better is the stability. After proper charging at 140 °C, the working temperatures can be as high as 110 − 120 °C. Acoustic measurements at frequencies of 200 Hz − 20 kHz indicate that the FEP layer systems are suitable for applications at least in this range. / Piezoelektrische Materialien haben große technische und wirtschaftliche Bedeutung für Anwendungen in Sensoren und Aktuatoren. Neben den traditionellen ferroelektrischen Keramiken und Polymeren bilden Ferroelektrete eine neue Gruppe der Piezoelektrika. Ferroelektrete sind reversible funktionelle Polymersysteme zur Umwandlung von elektrischer in mechanische Energie und umgekehrt. Sie zeichnen sich aus durch eine elastische zelluläre Struktur mit internen quasi-permanenten Dipolen. Der Mechanismus der Piezoelektrizität in Ferroelektreten wird dominiert von der Änderung der einzelnen Dipolmomente bei Einwirkung einer äußeren mechanischen Kraft. Insbesondere zelluläres Polypropylene (PP) war in den vergangenen zwei Jahrzehnten Gegenstand intensiver Forschung und Entwicklung im Hinblick auf die grundlegenden Eigenschaften und Anwendungen von Ferroelektreten. Einige bereits erhältliche kommerzielle Produkte nutzen die in geladenem zellulären PP erreichbaren hohen piezoelektrischen d33-Koeffizienten von 600 pC/N und mehr, sind aber durch eine relativ geringe maximale Betriebstemperatur von ungefähr 60 °C eingeschränkt. Die kürzlich entwickelten Ferroelektrete aus zellulärem Polyethylenterephthalat (PET) und zellulären Cyclo-Olefin-Copolymeren (COC) zeigen eine bessere Temperaturbeständigkeit (vor allem COC), allerdings gewöhlich auf Kosten von geringeren d33-Koeffizienten. Das Ziel der vorliegenden Arbeit ist es, temperaturbeständige Ferroelektrete mit für den Markt geeigneten piezoelektrischen Eigenschaften zu entwickeln. Physikalisches Schäumen ist eine beliebte Methode, um besonders reine Polymerschäume herzustellen. Häufig werden, wegen ihrer guten Löslichkeit in vielen Polymeren, Kohlenstoffdioxid (CO2) und Stickstoff (N2) im superkritischen Zustand als Treibmittel eingesetzt. Der Polyester Polyethylennaphtalat (PEN) hat ähnliche Eigenschaften wie PET, ist jedoch temperaturbeständiger. Ein Dreistufenprozess (Schäumen, Aufblähen und Strecken) wurde entwickelt, um PEN-Schäume für hochwertige Ferroelektrete herzustellen. Ungeschäumte PEN-Folien werden mit superkritischem CO2 unter hohem Druck gesättigt und anschließend unter geringem Druck bei Temperaturen nahe der Glastemperatur geschäumt. Um die Hohlräume zu vergrößern, wird der Schaum anschließend mittels Gasdiffusionsexpansion (GDE) aufgebläht. Nach zusätzlichem biaxialen Verstrecken erhält man die optimalen linsenförmigen Zellen, welche zu einer minimalen mechanischen Steifigkeit und einem maximalen piezoelektrischen d33-Koeffizienten des Ferroelektrets führen. Sowohl Korona- als auch Kontaktaufladung werden an zellulärem PEN erfolgreich eingesetzt. Die Lichtemission der dielektrisch behinderten Entladungen (DBDs) kann klar beobachtet werden. Korona-Aufladung in Gasen mit hohen dielektrischen Durchbruchsfestigkeiten, wie z.B. Schwefelhexafluorid (SF6), ermöglicht es, das Paschen-Durchbruchsfeld in den Hohlräumen und damit die erzielbare interne Ladungsdichte zu erhöhen. Dadurch können für zelluläres PEN piezoelektrische d33-Koeffizienten bis zu 500 pC/N erzielt werden. Piezoelektrischen Resonanzmessungen der Ferroelektrete liefern Steifigkeiten c33 im Bereich von 1 – 12 MPa, Antiresonanzfrequenzen von 0.2 – 0.8 MHz und elektromechanische Kopplungsfaktoren zwischen 0.016 und 0.069. PEN-Ferroelektrete zeigen eine bessere Temperaturstabilität als solche aus PP und PET. Der Anwendungsbereich von unbehandeltem PEN reicht bis etwa 80 – 100°C, jener von getemperten oder bei 120°C geladenen Proben bis etwa 110 – 120 °C. Akustische Messungen im Frequenzbereich von 2 Hz – 20 kHz zeigen die Eignung von PEN-Ferroelektretwandlern für Luftschallanwendungen. Fluoriertes Ethylen-Propylen (FEP) ist ein Fluorpolymer mit sehr guten physikalischen, chemischen und elektrischen Eigenschaften. Die Ladungsspeichereigenschaften von ungeschäumtem FEP können durch die Beimengung von Bornitrid deutlich verbessert werden. In dieser Arbeit wird zelluläres FEP mittels eines einstufigen Prozesses, dem schon erwähnten Schäumen mit überkritischem CO2, hergestellt. Die geladenen FEP-Proben weisen d33-Koeffizienten von bis zu 40 pC/N auf. Ermüdungstests zeigen eine sehr gute mechanische Stabilität von PEN- und FEP-Ferroelektreten. Zelluläre Polymerferroelektrete haben großes Potenzial für Anwendungen, und die Suche nach geeigneten zellulären Morphologien ist eng verknüpft mit dem technischen Aufwand ihrer Herstellung. Alternativ wurden Ferroelektrete mit Sandwich-Strukturen aus FEP-Folien entwickelt. Durch Laserverschmelzen eines FEP-Foliengitters mit zwei umgebenden FEP-Folien wird eine definierte, einheitliche zelluläre Struktur gebildet. Aus dielektrischen Resonanzspektren können effektive piezoelektrische d33-Koeffizienten bis zu 350 pC/N, effektive mechanische Steifigkeiten um 0.3 MPa, Antiresonanzfrequenzen um 30 kHz und elektromechanische Kopplungsfaktoren von etwa 0.05 abgeleitet werden. Proben, welche bei erhöhter Temperatur geladen werden, zeigen höhere Ladungsstabilitäten. Nach geeigneter Aufladung bei 140 °C kann die Arbeitstemperatur bis auf 110 – 120 °C gesteigert werden. Akustische Messungen im Frequenzbereich von 2 Hz – 20 kHz zeigen die Eignung von FEP-Sandwich-Strukturen für Luftschallanwendungen.
9

Hydrothermal and ionothermal carbon structures : from carbon negative materials to energy applications

Fellinger, Tim-Patrick January 2011 (has links)
The needs for sustainable energy generation, but also a sustainable chemistry display the basic motivation of the current thesis. By different single investigated cases, which are all related to the element carbon, the work can be devided into two major topics. At first, the sustainable synthesis of “useful” carbon materials employing the process of hydrothermal carbonisation (HC) is described. In the second part, the synthesis of heteroatom - containing carbon materials for electrochemical and fuel cell applications employing ionic liquid precursors is presented. On base of a thorough review of the literature on hydrothermolysis and hydrothermal carbonisation of sugars in addition to the chemistry of hydroxymethylfurfural, mechanistic considerations of the formation of hydrothermal carbon are proposed. On the base of these reaction schemes, the mineral borax, is introduced as an additive for the hydrothermal carbonisation of glucose. It was found to be a highly active catalyst, resulting in decreased reaction times and increased carbon yields. The chemical impact of borax, in the following is exploited for the modification of the micro- and nanostructure of hydrothermal carbon. From the borax - mediated aggregation of those primary species, widely applicable, low density, pure hydrothermal carbon aerogels with high porosities and specific surface areas are produced. To conclude the first section of the thesis, a short series of experiments is carried out, for the purpose of demonstrating the applicability of the HC model to “real” biowaste i.e. watermelon waste as feedstock for the production of useful materials. In part two cyano - containing ionic liquids are employed as precursors for the synthesis of high - performance, heteroatom - containing carbon materials. By varying the ionic liquid precursor and the carbonisation conditions, it was possible to design highly active non - metal electrocatalyst for the reduction of oxygen. In the direct reduction of oxygen to water (like used in polymer electrolyte fuel cells), compared to commercial platinum catalysts, astonishing activities are observed. In another example the selective and very cost efficient electrochemical synthesis of hydrogen peroxide is presented. In a last example the synthesis of graphitic boron carbon nitrides from the ionic liquid 1 - Ethyl - 3 - methylimidazolium - tetracyanoborate is investigated in detail. Due to the employment of unreactive salts as a new tool to generate high surface area these materials were first time shown to be another class of non - precious metal oxygen reduction electrocatalyst. / Die Notwendigkeit einer nachhaltigen Energiewirtschaft, sowie der nachhaltigen Chemie stellen die Motivation der vorgelegten Arbeit. Auf Grundlage separater Untersuchungen, die jeweils in engem Bezug zum Element Kohlenstoff stehen, kann die Arbeit in zwei Themenfelder geordnet werden. Der erste Teil behandelt die nachhaltige Herstellung nützlicher Kohlenmaterialien mit Hilfe des Verfahrens der hydrothermalen Carbonisierung. Im zweiten Teil wird die Synthese von Bor und Stickstoff angereicherten Kohlen aus ionischen Flüssigkeiten für elektrochemische Anwendungen abgehandelt. Insbesondere geht es um die Anwendung in Wasserstoff-Brennstoffzellen. Als Ergebnis einer sorgfältigen Literatur¬zusammenfassung der Bereiche Hydrothermolyse, hydrothermale Carbonisierung und Chemie des Hydroxymethylfurfurals wird ein chemisch-mechanistisches Modell zur Entstehung der Hydrothemalkohle vorgestellt. Auf der Basis dieses Modells wird ein neues Additiv zur hydrothermalen Carbonisierung von Zuckern vorgestellt. Die Verwendung des einfachen Additivs, genauer Borax, erlaubt eine wesentlich verkürzte und zu niedrigeren Temperaturen hin verschobene Prozessführung mit höheren Ausbeuten. Anhand des mechanistischen Modells wird ein Einfluss auf die Reaktion von Zuckern mit der reaktiven Kohlenvorstufe (Hydroxymethylfurfural) identifiziert. Die chemische Wirkung des Minerals Borax in der hydrothermalen Carbonisierung wird im Folgenden zur Herstellung vielfältig anwendbarer, hochporöser Kohlen mit einstellbarer Partikelgröße genutzt. Zum Abschluss des ersten Teils ist in einer Serie einfacher Experimente die Anwendbarkeit des mechanischen Modells auf die Verwendung „echter“ Biomasse in Form von Wassermelonenabfall gezeigt. Im zweiten Teil werden verschiedene cyano-haltige ionische Flüssigkeiten zur ionothermalen Synthese von Hochleistungskohlen verwendet. Durch Variation der ionischen Flüssigkeiten und Verwendung unterschiedlicher Synthesebedingungen wird die Herstellung hochaktiver, metallfreier Katalysatoren für die elektrochemische Reduktion von Sauerstoff erreicht. In der direkten Reduktion von Sauerstoff zu Wasser (wie sie in Brennstoffzellen Anwendung findet) werden, verglichen zu konventionellen Platin-basierten elektrochemischen Katalysatoren, erstaunliche Aktivitäten erreicht. In einem anderen Beispiel wird die selektive Herstellung von Wasserstoffperoxid zu sehr geringen Kosten vorgestellt. Abschließend wird anhand der Verwendung der ionischen Flüssigkeit 1-Ethyl-3-methylimidazolium-tetracyanoborat eine detaillierte Betrachtung zur Herstellung von graphitischem Borcarbonitrid vorgestellt. Unter Verwendung unreaktiver Salze, als einfaches Werkzeug zur Einführung großer inneren Oberflächen wird erstmals die elektrokatalytische Aktivität eines solchen Materials in der elektrochemischen Sauerstoffreduktion gezeigt.
10

Micro-Imaging Employed to Study Diffusion and Surface Permeation in Porous Materials

Hibbe, Florian 01 February 2013 (has links) (PDF)
This thesis summarizes experimental results on mass transport of small hydrocarbons in micro-porous crystals obtained via interference microscopy (IFM). The transport process has been investigated in three difffferent materials with difffferent pore structures : the metal-organic framework Zn(tbip) with one-dimensional pores, a FER type zeolite with two-dimensional anisotropic pore structure and zeolite A, a LTA type material with isotropic three-dimensional pore structure. Mass transport is described in terms of diffffusivity and surface permeability, both derived from the detected transient concentration profiles. The results on intra-crystalline diffffusion are discussed under consideration of the influences of pore diameter and molecule diameter, which are both found to have a strong influence on the diffffusivity. Based on experimental results measured on the Zn(tbip) material, a new model for the description of surface barriers is developed and proved by experiment. It is demonstrated that the observed surface barrier is created by the total blockage of a large number of pore entrances at the surface and not by a homogeneous surface layer.

Page generated in 0.1707 seconds