van der Waals heterostructures meet other low-dimensional materials. Stacking of about 1 nm thick nanosheets with out-of-plane anchor groups functionalized with fullerenes integrates this zero-dimensional material into layered heterostructures with a well-defined chemical composition and without degrading the mechanical properties. The developed modular and highly applicable approach enables the incorporation of other low-dimensional materials, e.g. nanoparticles or nanotubes, into heterostructures significantly extending the possible building blocks.

van der Waals heterostructures meet other low-dimensional materials. Stacking of about 1 nm thick nanosheets with out-of-plane anchor groups functionalized with fullerenes integrates this zero-dimensional material into layered heterostructures with a well-defined chemical composition and without degrading the mechanical properties. The developed modular and highly applicable approach enables the incorporation of other low-dimensional materials, e.g. nanoparticles or nanotubes, into heterostructures significantly extending the possible building blocks.

Polymer brushes can be used to tailor the physical and chemical properties of materials on demand to meet potential applications. Therefore, fabrication of polymer brushes with well-defined structure and functional groups enables the engineering of new materials with diverse functions. In addition, two-dimensional (2D) materials have their unique physical/chemical properties and potential applications in (opt)electronics, catalysis, energy storage, sensing, and other related fields. However, the dispersibility, chemical stability, charge transport behavior, mechanical properties of the 2D materials hinder their further applications. Therefore, combining polymer brushes and 2D materials may bring in new properties which are not available by either of them alone. This thesis focuses on brushing up 2D materials (from inorganic to organic) with universal photografting techniques. (1) The first chapter introduces the outline and research content of the thesis. (2) The second chapter describes the background of 2D materials and polymer brushes. In particular, this chapter analyzes mechanisms, drawbacks and benefits of different polymerization methods, and also summarizes the general approaches to grow polymer brushes on 2D material surfaces, coupling with potential applications of polymer functionalized 2D materials. (3) The third chapter shows the motivation and aim of this thesis. (4) The fourth chapter discusses the results of the functionalization of hexagonal boron nitride (hBN), MoS2, graphitic-carbon nitride (gCN), alkyl-polydopamine (alkyl-PDA), and conjugated 2D polymers (2DPs) with polymer brushes by the same self-initiated photografting and photopolymerization (SIPGP) method and their related applications in detail, respectively. First, the direct photopolymerization of vinyl monomers results in the formation of thick and homogeneous polymer brushes covalently bounded to hBN. The brush layer mechanically and chemically stabilizes the material and allows facile handling as well as long-term use in water splitting hydrogen evolution reactions. Second, the chapter demonstrates the MoS2 can be directly modified with polymer brushes by SIPGP. After modifying MoS2 with polymer brushes, the dispersibility of polymer brushes-modified MoS2 was obviously improved. Third, the polymer brushes functionalized gCN significantly improves the dispersibility. Application of polymer brush functionalized gCN as excellent recyclable substrates for an outstanding SERS as well as photocatalytic degradation of dyes is demonstrated. Fourth, to directly obtain the 2D materials with functional groups, the chapter proposes a facile method to prepare amphiphilic polymeric Janus nanosheets with hydrophilic PDA and hydrophobic alkyl chains at both sides. Benefiting from the Janus property of the alkyl-PDA nanosheets, the nanosheets can be grafted polymer brushes through photografting and be conjugated Fe3O4 nanoparticles selectively onto the PDA side. Finally, the chapter shows that various polymer brushes can be directly grafted onto 2DPs and freestanding system is also obtained. Moreover, it is found that the morphology of freestanding system quickly and reversibly responds to solvent quality by shrinking/stretching. (5) The fifth chapter addresses the general conclusion and future prospective of the whole work. (6) The sixth chapter describes the experiment part of the whole thesis.

Microporous membranes act as selective barriers and play an important role in industrial gas separation and water purification. The permeability of such membranes is inversely proportional to their thickness. Synthetic two-dimensional materials (2DMs), with a thickness of one to a few atoms or monomer-units are ideal candidates for developing separation membranes. In this Progress Report, we present groundbreaking advances in the design, synthesis, processing, and application of 2DMs for gas and ion separations, as well as water desalination. After the introduction in Section 1, this report describes the syntheses, structures, and mechanical properties of 2DMs in Section 2. In Section 3, we will discuss the established methods for processing 2DMs into selective permeation membranes and address the separation mechanism and their performances. Finally, current challenges and emerging research directions, which need to be addressed for developing next generation separation membranes, are summarized in the Conclusion and Perspective.

The enrichment of heavy hydrogen isotopes (deuterium, tritium) is required to fulfill their increasing application demands, e.g., in isotope related tracing, cancer therapy and nuclear reaction plants. However, their exceedingly low natural abundance and the close resemblance of physiochemical properties to protium render them extremely difficult to be separated. In this thesis, we investigate hydrogen isotope transport and separation via layered and two-dimensional materials. Three different theoretical challenges are undertaken in this work: (1) identification of the transported hydrogen species (proton H+ or protium H atom) inside interstitial space of layered materials (hexagonal boron nitride, molybdenum disulfide and graphite) and elucidation of their transport mechanism; (2) separation of hydron (proton H+, deuteron D+, and triton T+) isotopes through vacancy-free graphene and hexagonal boron nitride monolayers; (3) capture of the extremely rare light helium isotope (3He) with atomically thin two-dimensional materials. In the case of hydrogen transport, the essential challenges are investigation of its mechanism as well as the identification of transported particles. Regarding the case of hydron isotope separation, the essential questions are whether or not pristine graphene is permeable to the isotopes, and how quantum tunneling and topological Stone-Wales 55-77 defects affect their permeation and separation through graphene. In the last case, to capture the light helium isotope, quantum tunneling, which favors the lighter particles, is utilized to harvest 3He using graphdiyne monolayer. Our results provide novel theoretical insights into hydrogen particle transport inside the interstitial space of van der Waals materials; they uncover the mechanism of hydron isotope separation through 2D graphene and hexagonal boron nitride monolayers; and they predict the influence of pure quantum tunneling on the enrichment of 3He through graphdiyne membrane.

Following a 15-year-long investigation on graphene, two-dimensional (2D) carbon-rich conjugated frameworks (CCFs) have attracted growing research interest as a new generation of multifunctional materials. Typical 2D CCFs include 2D π-conjugated polymers (also classified as 2D π-conjugated covalent organic frameworks) and 2D π-conjugated metal–organic frameworks, which are characterized by layer-stacked periodic frameworks with high in-plane π-conjugation. These unique structures endow 2D CCFs with regular porosities, large specific surface areas, and superior chemical stability. In addition, 2D CCFs exhibit certain notable properties (e.g., excellent electronic conductivity, designable topologies, and defined catalytic/redox-active sites), which have motivated increasing efforts to explore 2D CCFs for electrochemical energy applications. In this Perspective, the structural features and synthetic principles of 2D CCFs are briefly introduced. Moreover, we discuss recent achievements in 2D CCFs designed for various electrochemical energy conversion (electrocatalysis) and storage (supercapacitors and batteries) applications. Particular emphasis is placed on analyzing the precise structural regulation of 2D CCFs. Finally, we provide an outlook about the future development of synthetic 2D CCFs for electrochemical applications, which concerns novel monomer design, chemical methodology/strategy establishment, and a roadmap toward practical applications.

The anion-intercalation chemistries of graphite have the potential to construct batteries with promising energy and power breakthroughs. Here, we report the use of an ultrathin, positively charged two-dimensional poly(pyridinium salt) membrane (C2DP) as the graphite electrode skin to overcome the critical durability problem. Large-area C2DP enables the conformal coating on the graphite electrode, remarkably alleviating the electrolyte. Meanwhile, the dense face-on oriented single crystals with ultrathin thickness and cationic backbones allow C2DP with high anion-transport capability and selectivity. Such desirable anion-transport properties of C2DP prevent the cation/solvent co-intercalation into the graphite electrode and suppress the consequent structure collapse. An impressive PF6−-intercalation durability is demonstrated for the C2DP-covered graphite electrode, with capacity retention of 92.8% after 1000 cycles at 1 C and Coulombic efficiencies of > 99%. The feasibility of constructing artificial ion-regulating electrode skins with precisely customized two-dimensional polymers offers viable means to promote problematic battery chemistries.

This dissertation works out the vibrational properties of epitaxial silicene, which was discovered by Vogt et al. in 2012 by the epitaxial synthesis on the silver substrate. Its two-dimensional (2D) character is modified in comparison to the free-standing silicene due to its epitaxial nature, since the underlying substrate alters the physical properties of silicene as a result of the strong hybridization of the electronic levels of the substrate and adlayer. The growth of silicene layers is complicated by the sensitivity of the Si structures to the experimental conditions, mainly temperature, resulting in the formation of several seemingly different surface reconstructions. Another Si structure appears on the Ag surface at a supramonolayer coverage. The Raman spectroscopy was utilized to understand the relation between different Si structures and reveal their origin as well as to investigate the phonon-related physical properties of two-dimensional Si sheets. The central core of this work is the growth and characterization of these 2D silicene monolayers on the Ag (111) surface as well as the formation of silicene multilayer structures. The characterization of these materials was performed using in situ surface-sensitive measurement methods such as Raman spectroscopy and low-energy electron diffraction under ultra-high vacuum conditions due to high chemical reactivity of epitaxial silicene. Additional characterization was done ex situ by means of scanning force microscopy. The experimentally determined spectral signature of the prototypical epitaxial (3x3)/(4x4) silicene structure was confirmed by ab initio calculations, in collaboration with theory groups. The Raman signatures of the other 2D and 3D Si phases on Ag (111) were determined which allowed us to provide a clear picture of their formation depending on the preparation conditions. The monitoring of the silicene multi-layer growth yielded the vibrational signature of the top layer, reconstructed in a (√3x√3) fashion. It was compared to the inverse, (√3x√3)-Ag/Si(111), system showing the vast amount of similarities, which suggest that the (√3x√3) reconstruction belong to the silver layer. The chemical and physical properties of this surface structure additionally strengthen this equivalence. The possibility of functionalization of epitaxial silicene was demonstrated via exposure to the atomic hydrogen under UHV conditions. The adsorbed hydrogen covalently bonds to the silicene lattice modifying it and reducing its symmetry. As shown by Raman spectroscopy, such modification can be reversed by thermal desorption of hydrogen. The excitation-dependent Raman measurements also suggest the change of the electronic properties of epitaxial silicene upon hydrogenation suggesting that its originally semi-metallic character is modified into a semiconducting one. / Die experimentellen Forschungsarbeiten zum Thema Silicen basieren auf den 2012 von Vogt et al. durchgeführten Untersuchungen zu dessen Synthese auf Silbersubstraten. Diese Untersuchungen lieferten die Grundlage, auf der zweidimensionales (2D) epitaktisches Silicen sowie weitere 2D Materialien untersucht werden konnten. In den anfänglichen Arbeiten konnte dabei gezeigt werden, dass sich die Eigenschaften von epitaktischem Silicen gegenüber den theoretischen Vorhersagen von frei-stehendem Silicen unterscheiden. Darüber hinaus verkomplizieren sich die experimentellen Untersuchungen dieses 2D Materials, da auf dem Ag(111) Wachstumssubstrat sechs verschiedene 2D Si Polytypen existieren. Eine detaillierte Darstellung dieser Untersuchungen findet sich in dem einführenden Kapitel der vorliegen Promotionsschrift. Der zentrale Kern dieser Arbeit beschäftigt sich mit dem Wachstum und der Charakterisierung dieser 2D Silicen Monolagen auf Ag(111) Oberflächen sowie der Bildung von Silicen- Multilagen Strukturen. Die Charakterisierung dieser Materialien wurde in situ mit oberflächenempfindlichen Messmethoden wie der Raman Spektroskopie und der niederenergetischen Elektronenbeugung unter Ultrahochvakuum-Bedingungen durchgeführt. Eine zusätzliche Charakterisierung erfolgte ex situ mittels Raster-KraftMikroskopie. Die experimentell bestimmte spektrale Raman-Signatur der prototypischen epitaktischen (3x3)/(4x4) Silicene Struktur wurde durch ab initio Rechnungen, in Zusammenarbeit mit Theoriegruppen, bestätigt. Durch diesen Vergleich wir die zweidimensionale Natur der epitaktischen Silicen-Schichten vollständig bestätigt, wodurch andere mögliche Interpretationen ausgeschlossen werden können. Darüber hinaus wurden die Ramans-Signaturen der weiteren 2D und 3D Siliziumphasen auf Ag(111) bestimmt, wodurch sich ein klares Bild der Bildung dieser Strukturen in Abhängigkeit von den Präparationsbedingungen ergibt. Um die Möglichkeit der Funktionalisierung von Silicen und der weiteren 2D Si Strukturen zu testen, wurden diese unter UHV Bedingungen atomarem Wasserstoff ausgesetzt. Durch die Bindung zu den Wasserstoffamen wird die kristalline Struktur der Silicen-Schichten modifiziert und die Symmetrie reduziert, was sich deutlich in der spektralen Raman-Signatur zeigt. Wie mittels Raman Spektroskopie gezeigt werden konnte, kann diese Modifikation durch thermische Desorption des Wasserstoffs rückgängig gemacht werden, ist also reversibel. Raman Messungen mit verschiedenen Anregungswellenlängen deuten darüber hinaus auf die Änderung der elektronischen Eigenschaften der Silicen-Schichten durch die Hydrierung hin. Der ursprüngliche halbmetallische Charakter der epitaktischen Silicen-Schicht geht möglicherweise in einen halbleitenden Zustand über. Das Wachstum von Silicen Multilagen wurde ebenfalls mit in situ Ramanspektroskopie verfolgt. Die sich dabei ergebene Raman-Signatur wurde mit der Raman-Signatur von Ag terminiertem Si(111) verglichen. Hier zeigen sich große Ähnlichkeiten, die auf eine ähnliche atomare Struktur hindeuten und zeigen, dass Ag Atome für die Ausbildung der Oberflächenstruktur während des Wachstums der Si-Lagen verantwortlich sind. Die chemischen und physikalischen Eigenschaften dieser Struktur bestärken zusätzlich diese Äquivalenz.

Microporous membranes act as selective barriers and play an important role in industrial gas separation and water purification. The permeability of such membranes is inversely proportional to their thickness. Synthetic two-dimensional materials (2DMs), with a thickness of one to a few atoms or monomer-units are ideal candidates for developing separation membranes. In this Progress Report, we present groundbreaking advances in the design, synthesis, processing, and application of 2DMs for gas and ion separations, as well as water desalination. After the introduction in Section 1, this report describes the syntheses, structures, and mechanical properties of 2DMs in Section 2. In Section 3, we will discuss the established methods for processing 2DMs into selective permeation membranes and address the separation mechanism and their performances. Finally, current challenges and emerging research directions, which need to be addressed for developing next generation separation membranes, are summarized in the Conclusion and Perspective.

This dissertation works out the vibrational properties of epitaxial silicene, which was discovered by Vogt et al. in 2012 by the epitaxial synthesis on the silver substrate. Its two-dimensional (2D) character is modified in comparison to the free-standing silicene due to its epitaxial nature, since the underlying substrate alters the physical properties of silicene as a result of the strong hybridization of the electronic levels of the substrate and adlayer. The growth of silicene layers is complicated by the sensitivity of the Si structures to the experimental conditions, mainly temperature, resulting in the formation of several seemingly different surface reconstructions. Another Si structure appears on the Ag surface at a supramonolayer coverage. The Raman spectroscopy was utilized to understand the relation between different Si structures and reveal their origin as well as to investigate the phonon-related physical properties of two-dimensional Si sheets. The central core of this work is the growth and characterization of these 2D silicene monolayers on the Ag (111) surface as well as the formation of silicene multilayer structures. The characterization of these materials was performed using in situ surface-sensitive measurement methods such as Raman spectroscopy and low-energy electron diffraction under ultra-high vacuum conditions due to high chemical reactivity of epitaxial silicene. Additional characterization was done ex situ by means of scanning force microscopy. The experimentally determined spectral signature of the prototypical epitaxial (3x3)/(4x4) silicene structure was confirmed by ab initio calculations, in collaboration with theory groups. The Raman signatures of the other 2D and 3D Si phases on Ag (111) were determined which allowed us to provide a clear picture of their formation depending on the preparation conditions. The monitoring of the silicene multi-layer growth yielded the vibrational signature of the top layer, reconstructed in a (√3x√3) fashion. It was compared to the inverse, (√3x√3)-Ag/Si(111), system showing the vast amount of similarities, which suggest that the (√3x√3) reconstruction belong to the silver layer. The chemical and physical properties of this surface structure additionally strengthen this equivalence. The possibility of functionalization of epitaxial silicene was demonstrated via exposure to the atomic hydrogen under UHV conditions. The adsorbed hydrogen covalently bonds to the silicene lattice modifying it and reducing its symmetry. As shown by Raman spectroscopy, such modification can be reversed by thermal desorption of hydrogen. The excitation-dependent Raman measurements also suggest the change of the electronic properties of epitaxial silicene upon hydrogenation suggesting that its originally semi-metallic character is modified into a semiconducting one. / Die experimentellen Forschungsarbeiten zum Thema Silicen basieren auf den 2012 von Vogt et al. durchgeführten Untersuchungen zu dessen Synthese auf Silbersubstraten. Diese Untersuchungen lieferten die Grundlage, auf der zweidimensionales (2D) epitaktisches Silicen sowie weitere 2D Materialien untersucht werden konnten. In den anfänglichen Arbeiten konnte dabei gezeigt werden, dass sich die Eigenschaften von epitaktischem Silicen gegenüber den theoretischen Vorhersagen von frei-stehendem Silicen unterscheiden. Darüber hinaus verkomplizieren sich die experimentellen Untersuchungen dieses 2D Materials, da auf dem Ag(111) Wachstumssubstrat sechs verschiedene 2D Si Polytypen existieren. Eine detaillierte Darstellung dieser Untersuchungen findet sich in dem einführenden Kapitel der vorliegen Promotionsschrift. Der zentrale Kern dieser Arbeit beschäftigt sich mit dem Wachstum und der Charakterisierung dieser 2D Silicen Monolagen auf Ag(111) Oberflächen sowie der Bildung von Silicen- Multilagen Strukturen. Die Charakterisierung dieser Materialien wurde in situ mit oberflächenempfindlichen Messmethoden wie der Raman Spektroskopie und der niederenergetischen Elektronenbeugung unter Ultrahochvakuum-Bedingungen durchgeführt. Eine zusätzliche Charakterisierung erfolgte ex situ mittels Raster-KraftMikroskopie. Die experimentell bestimmte spektrale Raman-Signatur der prototypischen epitaktischen (3x3)/(4x4) Silicene Struktur wurde durch ab initio Rechnungen, in Zusammenarbeit mit Theoriegruppen, bestätigt. Durch diesen Vergleich wir die zweidimensionale Natur der epitaktischen Silicen-Schichten vollständig bestätigt, wodurch andere mögliche Interpretationen ausgeschlossen werden können. Darüber hinaus wurden die Ramans-Signaturen der weiteren 2D und 3D Siliziumphasen auf Ag(111) bestimmt, wodurch sich ein klares Bild der Bildung dieser Strukturen in Abhängigkeit von den Präparationsbedingungen ergibt. Um die Möglichkeit der Funktionalisierung von Silicen und der weiteren 2D Si Strukturen zu testen, wurden diese unter UHV Bedingungen atomarem Wasserstoff ausgesetzt. Durch die Bindung zu den Wasserstoffamen wird die kristalline Struktur der Silicen-Schichten modifiziert und die Symmetrie reduziert, was sich deutlich in der spektralen Raman-Signatur zeigt. Wie mittels Raman Spektroskopie gezeigt werden konnte, kann diese Modifikation durch thermische Desorption des Wasserstoffs rückgängig gemacht werden, ist also reversibel. Raman Messungen mit verschiedenen Anregungswellenlängen deuten darüber hinaus auf die Änderung der elektronischen Eigenschaften der Silicen-Schichten durch die Hydrierung hin. Der ursprüngliche halbmetallische Charakter der epitaktischen Silicen-Schicht geht möglicherweise in einen halbleitenden Zustand über. Das Wachstum von Silicen Multilagen wurde ebenfalls mit in situ Ramanspektroskopie verfolgt. Die sich dabei ergebene Raman-Signatur wurde mit der Raman-Signatur von Ag terminiertem Si(111) verglichen. Hier zeigen sich große Ähnlichkeiten, die auf eine ähnliche atomare Struktur hindeuten und zeigen, dass Ag Atome für die Ausbildung der Oberflächenstruktur während des Wachstums der Si-Lagen verantwortlich sind. Die chemischen und physikalischen Eigenschaften dieser Struktur bestärken zusätzlich diese Äquivalenz.