Spelling suggestions: "subject:"matematerials - 1roperties"" "subject:"matematerials - eproperties""
11 |
Synthèse d'un copolymère ionique électrochimiquement actif à base de ferrocène-imidazolium et son utilisation possible en matériaux compositesSkrypnik, Valentyn 09 1900 (has links)
No description available.
|
12 |
Synthesis And Investigation Of Transition Metal Oxides Towards Realization Of Novel Materials PropertiesRamesha, K 07 1900 (has links)
Transition metal compounds, especially the oxides, containing dn (0 ≤ n ≤ 10) electronic configuration, constitute the backbone of solid state/materials chemistry aimed at realization of novel materials properties of technological importance. Some of the significant materials properties of current interest are spin-polarized metallic ferromagnetism, negative thermal expansion, second harmonic nonlinear optical (NLO) susceptibility, fast ionic and mixed electronic/ionic conductivity for application in solid state batteries, and last but not the least, high-temperature superconductivity. Typical examples for each one of these properties could be found among transition metal oxides. Thus, alkaline-earth metal (A) substituted rare-earth (Ln) manganites, Lnı.xAxMnΟ3, are currently important examples for spin-polarized magnetotransport, ZrV2O7 and ZrW2O8 for negative thermal expansion coefficient, KTiOPO4 and LiNbO3 for second harmonic NLO susceptibility, (Li, La) TiO3 and LiMn2O4 for fast-ionic and mixed electronic/ionic conductivity respectively, and the whole host of cuprates typified by YBa2Cu3O7 for high Tc superconductivity.
Solid state chemists constantly endeavour to obtain structure-property relations of solids so as to be able to design better materials towards desired properties. Synthesis coupled with characterization of structure and measurement of relevant properties is a common strategy that chemists adopt for this task. The work described in this thesis is based on such a broad-based chemists' approach towards understanding and realization of novel materials properties among the family of metal oxides.
A search for metallic ferro/ferrimagnetism among the transition metal perovskite oxides, metallicity and possibility of superconductivity among transition-metal substituted cuprates and second order NLO susceptibility among metal oxides containing d° cations such as Ti(IV), V(V) and Nb(V) - constitute the main focus of the present thesis. New synthetic strategies that combine the conventional ceramic approach with the chemistry-based 'soft1 methods have been employed wherever possible to prepare the materials. The structures and electronic properties of the new materials have been probed by state-of-the art techniques that include powder X-ray diffraction (XRD) together with Rietveld refinement, electron diffraction, thermogravimetry, measurement of magnetic susceptibility (including magnetoresistance), Mossbauer spectroscopy and SHG response (towards 1064 nm laser radiation), besides conventional analytical techniques for determination of chemical compositions. Some of the highlights of the present thesis are: (i) synthesis of new mixed valent [Mn(III)/Mn(IV)] perovskite-type manganites, ALaMn2O6-y (A = K, Rb) and ALaBMn3O9_y (A = Na, K; B = Ca, Sr) that exhibit ferromagnetism and magnetoresistance; (ii) investigation of a variety of ferrimagnetic double-perovskites that include ALaMnRuO6 (A = Ca, Sr, Ba) and ALaFeVO6 (A = Ca, Sr) and A2FeReO6 (A = Ca, Sr, Ba) providing new insights into the occurrence of metallic and nonmetallic ferrimagnetic behaviour among this family of oxides; (iii) synthesis of new K2NiF4-type oxides, La2-2xSr2XCui.xMxO4 (M = Ti, Mn, Fe, Ru) and investigation of Cu-O-M interaction in two dimension and (iv) identification of the structural rnotif(s) that gives rise to efficient second order NLO optical (SHG) response among d° oxides containing Ti(IV), V(V), Nb(V) etc., and synthesis of a new SHG material, Ba2-xVOSi2O7 having the fresnoite structure.
The thesis consists of five chapters and an appendix, describing the results of the investigations carried out by the candidate. A brief introduction to transition metaloxides, perovskite oxides in particular, is presented in Chapter 1. Attention is focused on the structure and properties of these materials.
Chapter 2 describes the synthesis and investigation of two series of anion-deficient perovskite oxides, ALaMn2O6-y (A = K, Rb, Cs) and ALaBMn3O9_y (A = Na, K; B = Ca, Sr). ALaMn2O6-y (A = K, Rb, Cs) series of oxides adopt 2 ap x 2 ap superstructure for K and Rb phases and √2 av x √2 ap x 2 ap superstructure (ap = perovskite subcell) for the Cs phase. Among ALaBMn3O9-y phases, the A = Na members adopt a new kind of perovskite superstructure, ap x 3 ap, while the A = K phases do not reveal an obvious superstructure of the perovskite. All these oxides are ferromagnetic (Tc ~ 260-325 K) and metallic exhibiting a giant magnetoresistance behaviour similar to alkaline earth metal substituted lanthanum manganites, Lai_xAxMnO3. However, unlike the latter, the resistivity peak temperature Tp for all the anion-deficient manganites is significantly lower than Tc.
In Chapter 3, we have investigated structure and electronic properties of double-perovskite oxides, A2FeReO6 (A = Ca, Sr and Ba). The A = Sr, Ba phases are cubic (Fm3m) and metallic, while the A = Ca phase is monoclinic (P2yn) and nonmetallic. All the three oxides are ferrimagnetic with Tcs 315-385 K as reported earlier. A = Sr, Ba phases show a negative magnetoresistance (MR) (10-25 % at 5 T), while the Ca member does not show an MR effect. 57Fe Mossbauer spectroscopy shows that iron is present in the high-spin Fe3+ (S = 5/2) state in Ca compound, while it occurs in an intermediate state between high-spin Fe2+ and Fe3+ in the Ba compound. Monoclinic distortion and high covalency of Ca-O bonds appear to freeze the oxidation states at Fe+3/Re5+ in Ca2FeRe O6, while the symmetric structure and ionic Ba-O bonds render the FeReO6 array highly covalent and Ba2FeReO6 metallic. Mossbauer data for Sr2FeReO6 shows that the valence state of iron in this compound is intermediate between that in Ba and Ca compounds. It is likely that Sr2FeReO6 which lies at the boundary between metallic and insulating states is metastable, phase-seperating into a percolating mixture of different electronic states at the microscopic level.
In an effort to understand the occurrence of metallicity and ferrimagnetism among double perovskites, we have synthesized several new members : ALaMnFeO6 (A = Ca, Sr, Ba), ALaMnRuO6 (A = Ca, Sr, Ba) and ALaVFeO6 (A = Ca, Sr) (Chapter 3). Electron diffraction reveals an ordering of Mn and Ru in ALaMnRuO6 showing a doubling of the primitive cubic perovskite cell, while ALaVFeO6 do not show an ordering. ALaMnRuOs are ferrimagnetic (Tcs ~ 200-250 K) semiconductors, but ALaVFeO6 oxides do not show a long range magnetic ordering .
The present work together with the previous work on double perovskites shows that only a very few of them exhibit both metallicity and ferrimagnetism, although several of them are ferrimagnetic. For example, among the series Ba2MReO6 (M = Mn, Fe, Co, Ni), only the M = Fe oxide is both metallic and ferrimagnetic, while M = Mn and Ni oxides are ferrimagnetic semiconductors. Similarly, A2CrMoO6 (A = Ca, Sr), A2CrRe06 (A = Ca, Sr), and ALaMnRuO6 (A = Ca, Sr, Ba) are all ferrimagnetic but not metallic. While ferrimagnetism of double perovskites arise from an antiferromagnetic coupling of B and B' spins through the B-O-B' bridges, the occurrence of metallicity seems to require precise matching of the energies of d-states of B and B' cations and a high covalency in the BB'O6 array that allows a facile electron-transfer between B and B',
Bn++B’m+↔B(n+1)++B’(m-1)+
without an energy cost, just as occurs in ReO3 and other metallic ABO3 perovskites.
In an effort to understand the Cu-O-M (M = Ti, Mn, Fe, Ru) electronic interaction in two dimension, we have investigated K2N1F4 oxides of the general formula La2-2xSr2XCui.xMxO4 (M = Ti, Mn, Fe or Ru). These investigations are described in Chapter 4. For M = Ti, only the x = 0.5 member could be prepared, while for M = Mn and Fe, the composition range is 0 < x < 1.0, and for M = Ru, the composition range is 0 < x ≤ 0.5. There is no evidence for ordering of Cu(II) and M(IV) in the x = 0.5 members. While the members of the M = Ti, Mn and Ru series are semiconducting/insulating, the members of the M = Fe series are metallic, showing a broad metal-semiconductor transition around 100 K for 0 < x ≤ 0.15 that is possibly related to a Cu(II)-O-Fe(IV) < > Cu(III)-O-Fe(III) valence degeneracy. Increasing the strontium content at the expense of lanthanum in La2-2xSr2XCui.xFexO4 for x ≤ 0.20 renders the samples metallic but not superconducting.
In a search for inorganic oxide materials showing second order nonlinear optical (NLO) susceptibility, we have investigated several borates, silicates and phosphates containing /ram-connected MO6 octahedral chains or MO5 square-pyramids, where M = d°: Ti(IV), Nb(V) or Ta(V). Our investigations, which are described in Chapter 5, have identified two new NLO structures: batisite, Na2Ba(TiO)2Si4O12, containing trans-connectd TiO6 octahedral chains, and fresnoite, Ba2TiOSi2O7, containing square-pyramidal T1O5. Investigation of two other materials containing square-pyramidal TiO5, viz., Cs2TiOP2O7 and Na4Ti2Si8O22. 4H2O, revealed that isolated TiO5 square-pyramids alone do not cause a second harmonic generation (SHG) response; rather, the orientation of T1O5 units to produce -Ti-O-Ti-O- chains with alternating long and short Ti-0 distances in the fresnoite structure is most likely the origin of a strong SHG response in fresnoite. Indeed, we have been able to prepare a new fresnoite type oxide, Ba2.xVOSi2O7 (x ~ 0.5) that shows a strong SHG response, confirming this hypothesis.
In the Appendix, we have described three synthetic strategies that enabled us to prepare magnetic and NLO materials. We have shown that the reaction
CrO3 + 2 NH4X > CrO2 + 2 NH3 + H2O + X2 (X = Br, I), which occurs
quantitatively at 120-150 °C, provides a convenient method for the synthesis of CrO2. Unlike conventional methods, the method described here does not require the use of high pressure for the synthesis of this technologically important material.
For the synthesis of magnetic double perovskites, we have developed a method that involves reaction of basic alkali metal carbonates with the acidic oxides (e.g. Re2O7) first, followed by reaction of this precursor oxide with the required transition metal/transition metal oxide (e.g. Fe/Fe2O3). By this method we have successfully prepared single-phase perovskite oxides, A2FeReO6, ACrMoO6 and ALaFeVO6.
We have prepared the new NLO material Ba2_xV0Si207 from Ba2VOSi2O7 by a soft chemical redox reaction involving the oxidation of V(IV) to V(V) using Br2 in CH3CN/CHCI3.
Ba2V0Si207 + 1/2 Br2 > Bai.5V0Si207 + 1/2 BaBr2.
The work presented in this thesis was carried out by the candidate as part of the Ph.D. training programme. He hopes that the studies reported here will constitute a worthwhile contribution to the solid state chemistry of transition metal oxides and related materials.
|
13 |
Aprovechamiento integral del Cannabis sativa como material de refuerzo/carga del polipropilenoVallejos, María Evangelina 09 June 2006 (has links)
En este trabajo se ha estudiado el potencial tanto los filamentos de cáñamo como de la cañamiza como refuerzo/carga del polipropileno. La modificación de estos materiales se realiza para lograr una mayor compatibilidad con la matriz polimérica. Se evaluaron las propiedades mecánicas de las resistencias a tracción e impacto, de los materiales compuestos reforzados tanto de filamento como de cañamiza. Los filamentos de cáñamo poseen suficiente capacidad de refuerzo en los materiales compuestos basado en polipropileno debido a sus propiedades intrínsecas, siendo una buena alternativa como material de refuerzo. Así, la adición de MAPP (polipropileno modificado con anhídrido maleico) conduce a materiales compuestos con unas resistencias a tracción de hasta el 70% de las que se obtienen con compuestos de PP reforzados con fibra de vidrio. Mientras que la cañamiza ha actuado como una carga en la matriz, incrementado significativamente la rigidez de los materiales compuestos. / In this work, the potential of hemp strands as well as hemp straw, to be used as reinforcement/filler of polyprppylene has been studied. The modification of these materials ha been carried out to obtain a greater compatibility with the polymer matrix. The mechanical properties of the obtained materials were evaluated under tensile, flexural and impact stresses. The hemp strands showed a sufficient capacity of reinforcement in the polypropylene-based composite due to their intrinsic properties, being a good alternative like reinforcement agent. Thus, the addition of MAPP (polypropylene modified with maleic anhydride) leaded to composites with a value of ultimate tensile strength that achieved 70% of the value of materials formulated with PP and fibreglass. In the particular case of the addition of hemp straw, this component acted as a filler of the polymer matrix, increasing the rigidity of the composite but with a limited influence in the ultimate tensile strength.
|
14 |
Amélioration des simulations thermiques dans les systèmes d'éclairage automobiles / Improvement of the accuracy of thermal simulations in automotive lighting systemsDauphin, Myriam 10 April 2014 (has links)
Les systèmes d'éclairage automobiles sont conçus pour éclairer la route de manière optimale. Une dégradation des optiques et des matériaux plastiques peut altérer la qualité du faisceau lumineux. En phase de conception, les simulations thermiques visent à minimiser les coûts engendrés par les tests expérimentaux réalisés sur des maquettes. Avec le développement de nouvelles optiques, la méthode numérique des ordonnées discrètes, utilisée pour le calcul des transferts radiatifs, souffre d'un manque de précision en raison d'une discrétisation spatiale limitée pour les réflexions spéculaires. Une augmentation de la discrétisation pourrait mener à des temps de calculs importants. Pour palier à ce problème, la méthode de Monte Carlo a été choisie afin d'évaluer les densités de flux aux parois dans le cas des surfaces opaques, ou un terme source radiatif dans le cas des matériaux semi-Transparents. Notre algorithme est implémenté dans l'environnement de développement EDStar. Cet environnement inclut la bibliothèque de synthèses d'images PBRT permettant de reproduire les trajets optiques dans une géométrie 3D complexe. L'étude porte sur des produits d'éclairage composés de lampes, ainsi le développement d'un modèle numérique fiable requiert des paramètres pertinents en entrée de modèle. Les travaux ont donc été scindés en trois axes d'études. Le premier inclut une phase de caractérisation des propriétés thermiques d'une lampe à incandescence (25W). Différentes méthodes de mesures ont été étudiées pour déterminer la température du filament, moteur des transferts thermiques, et la température de l'enveloppe. Le second axe consiste à développer un modèle des transferts radiatifs dans le système d'éclairage. L'objectif est de localiser les zones de concentration du rayonnement et estimer leur étendue. Enfin, le troisième axe vise à coupler le calcul radiatif à des simulations thermiques dans l'outil de CFD Fluent. La CFD (Computational Fluid Dynamics) est ici nécessaire pour résoudre les problèmes convectifs couplés aux autres transferts thermiques dans un produit industriel. / Automotive lighting systems are designed to illuminate the road optimally. Degradation of optical properties or plastics materials may altering the quality of lighting. In the design stage, thermal simulations are intended to minimize the costs of experimental tests performed on prototypes. With the apparition of new headlights optics, the Discrete Ordinates method (DO) is not suitable in certain cases due to a lack of accuracy when dealing with specular reflections and refractions. A raise of the spatial discretization could lead to significant time computation. To overcome this problem, we chose the Monte Carlo method in order to estimate flux densities to the walls in the case of opaque surfaces, or to estimate a radiative source term in the case of semi-Transparent media. Our algorithm is implemented in EDStar coding environment. This environment includes the PBRT synthesis images library allowing the use of raytracing techniques with our algorithm, thus reproducing optical paths of rays in a complex 3D geometry. The development of a reliable numerical model requires relevant parameters in input. This need led us to split the work into three main parts. The first axis includes a characterization phase of thermal properties of an incandescent lamp (25W) in order to model its radiative emission. Different measurements methods have been investigated to determine the temperature of the filament, which is the origine of heat transfers, and the temperature of the glass envelope. The second axis consists in obtaining a precise distribution of flux density distributions in order to locate hot spots and assess their extent. Finally, the third part of study is to couple the radiative calculation to CFD (Computational Fluid Dynamics) simulations. CFD is here necessary to solve problems with convective phenomena coupled with other heat transfers in an industrial product.
|
15 |
First-Principles Studies of Point Defects and Phase Transformations in MaterialsBhat, Soumya S January 2014 (has links) (PDF)
The functional and mechanical properties of a material are often determined by the defects in them. A thorough understanding of the relationship between the defects and the properties allows for tailoring a material’s properties into the desired combinations. Amongst the different classes of defects, experimental identification of point defects is typically difficult and indirect, usually requiring an ingenious combination of different techniques. In this context, first-principles calculations, complemented with experiments, offer insights into the formation of defects and their role in properties. This was demonstrated in this thesis through investigations on the effect of calcium vacancies on structure, vibrational and elastic properties hydroxyapatite (HAp), and oxygen vacancies on elastic properties of zinc oxide (ZnO) using first-principles calculations based on density functional theory (DFT). Our results confirm a considerable reduction in the elastic constants of HAp—the inorganic constituent of bone—due to Ca-deficiency, which was experimentally reported earlier. Elastic anisotropic behavior of stoichiometric and Ca-deficient HAp is analyzed, which will be useful in understanding the effects of crystal orientation in designing synthetic bone. Local structural stability of HAp and Ca-deficient HAp structures is assessed with full phonon dispersion studies and the specific signatures in the computed vibrational spectra for Ca deficiency in HAp can be utilized in experimental characterization of different types of defected HAp. In ZnO, formation energies of oxygen vacancies in different types of oxygen deficient structures are analyzed to ascertain their stability. Our results show considerable degradation of some of the elastic moduli due to the presence of such vacancies. Further, the charge state of the defect structure is found to influence the shear elastic constants. Evaluation of elastic anisotropy of stoichiometric and oxygen deficient ZnO indicates the significant anisotropy in elastic properties and stiff c-axis orientation.
The second part of the thesis deals with developing some understanding of the pressure-induced phase transformations (PIPT) in an inorganic material, titanium nitride (TiN), and in a metal-organic framework (MOF), erbium formate crystal. PIPT, which is a common phenomenon in many materials, is of great interest in materials science as the properties of the transformation product can diverge significantly from those of the parent phase. Hence, it is important to understand the pressure induced changes so to improve the component reliability and to enhance service life of materials used in high pressure applications. TiN undergoes PIPT from NaCl to CsCl structure. On the basis of our DFT calculations, we propose a new transformation path, which shows that the stress required for this transformation is substantially lower when it is deviatoric in nature than that under hydrostatic pressure. Local stability of the structure is assessed with phonon dispersion determined at different pressures, and we find that CsCl structure of TiN is expected to distort after the transformation. Further, we provide a quantitative comparison of electronic structure of TiN in NaCl structure with that of high pressure phase with implication to electrical conduction properties. Next, we investigate the PIPT associated with bond rearrangement in erbium formate framework. Phase transition pressure is estimated and the corresponding changes in bonding characteristics are analyzed. Estimated lattice constants for both the phases agree well with the earlier experimental results. While the transformation pressure of the framework is overestimated with respect to experiment, our calculations confirm PIPT, and thus provide a theoretical evidence for the experimental finding.
|
16 |
Non-Isothermal Laser Treatment of Fe-Si-B Metallic GlassJoshi, Sameehan Shrikant 12 1900 (has links)
Metallic glasses possess attractive properties, such as high strength, good corrosion resistance, and superior soft magnetic performance. They also serve as precursors for synthesizing nanocrystalline materials. In addition, a new class of composites having crystalline phases embedded in amorphous matrix is evolving based on selective crystallization of metallic glasses. Therefore, crystallization of metallic glasses and its effects on properties has been a subject of interest. Previous investigations from our research group related to laser assisted crystallization of Fe-Si-B metallic glass (an excellent soft magnetic material by itself) showed a further improvement in soft magnetic performance. However, a fundamental understanding of crystallization and mechanical performance of laser treated metallic glass was essential from application point of view. In light of this, the current work employed an integrated experimental and computational approach to understand crystallization and its effects on tensile behavior of laser treated Fe-Si-B metallic glass. The time temperature cycles during laser treatments were predicted using a finite element thermal model. Structural changes in laser treated Fe-Si-B metallic glass including crystallization and phase evolution were investigated with the aid of X-ray diffraction, differential scanning calorimetry, resistivity measurements, and transmission electron microscopy. The mechanical behavior was evaluated by uniaxial tensile tests with an InstronTM universal testing machine. Fracture surfaces of the metallic glass were observed using scanning electron microscopy and site specific transmission electron microscopy.
Fe-Si-B metallic glass samples treated with lower laser fluence (<0.49 J/mm2) underwent structural relaxation while higher laser flounces led to partial crystallization. The crystallization temperature experienced an upward shift due to rapid heating rates of the order of 104 K/s during laser treatments. The heating cycle was followed by termination of laser upon treatment attainment of peak temperature and rapid cooling of the similar order. Such dynamic effects resulted in premature arrest of the crystallite growth leading to formation of fine crystallites/grain (~32 nm) of α-(Fe,Si) as the major component and Fe2B as the minor component. The structural relaxation, crystallization fractions of 5.6–8.6 Vol% with α-(Fe,Si) as the main component, and crystallite/grain size of the order of 12 nm obtained in laser fluence range of 0.39-0.49 J/mm2 had minimal/no influence on tensile behavior of the laser treated Fe-Si-B metallic glass foils. An increase in laser fluence led to progressive increase in crystallization fractions with considerable amounts of Fe2B (2-6 Vol%) and increase in grain size to ~30 nm. Such a microstructural evolution severely reduced the strength of Fe-Si-B metallic glass. Moreover, there was a transition in fracture surface morphology of laser treated Fe-Si-B metallic glass from vein pattern to chevron pattern. Tensile loading lacked any marked influence on the crystallization behavior of as-cast and structurally relaxed laser-treated metallic glass foils. However, a significant crystallite/grain growth/coarsening of the order of two and half times was observed in the fractured region compared to the region around it for the laser-treated partially crystallized metallic glass foils. The simultaneous effects of stress generation and temperature rise during tensile loading were considered to play a key role in crystallite/grain growth/coarsening.
|
17 |
THE STUDY AND APPLICATIONS OF PLASMONICS WITH ORDERED AND DISORDERED METASURFACESSarah Nahar Chowdhury (9215831) 13 June 2023 (has links)
<p>Plasmonics with the capability to harness electromagnetic waves at a nanoscale can be utilized for multitude of applications in ultra-compact miniature optical devices. Plasmonic metasurfaces which are artificially designed sub-wavelength structures have gained unprecedented interest in being able to engineer and effectively modulate the amplitude and phase of the incident wave. Introducing randomness to such plasmonic metasurfaces can also advance possibilities for extraordinary wave manipulation. Hence, by exploiting the plasmonic response of the ordered and disordered metasurfaces, we can design high performance devices for nanoscale optics.</p>
<p>Aiming to provide a holistic solution to the current device limitations and bio-compatibility, my research focuses on non-toxic and environment-friendly coloration using plasmonic disordered metasurfaces. These structures generate a broad range of long-lasting colors in reflection that can be applied to real-life artistic or technological applications with a spatial resolution on the order of 0.3 mm or less. Moreover, my research also deals with the possibility of even concentrating energy in the smallest phase-space volume in optics in the form of coherent radiation through designing nanolasers. The study of carrier dynamics and photophysics of the gain media can be extremely beneficial towards the practicability of these lasers. This work elucidates the evolution of different competing mechanisms for coherent lasing. The dynamic study and experimental demonstration of these devices and respective materials can therefore provide a novel aspect to fundamental and applied research.</p>
|
Page generated in 0.0744 seconds