Global ETD Search

11	Performance Analysis of Diversity Techniques for Wireless Communication System ISLAM, MD. JAHERUL January 2012 (has links) Different diversity techniques such as Maximal-Ratio Combining (MRC), Equal-Gain Combining (EGC) and Selection Combining (SC) are described and analyzed. Two branches (N=2) diversity systems that are used for pre-detection combining have been investigated and computed. The statistics of carrier to noise ratio (CNR) and carrier to interference ratio (CIR) without diversity assuming Rayleigh fading model have been examined and then measured for diversity systems. The probability of error (p_e) vs CNR and (p_e) versus CIR have also been obtained. The fading dynamic range of the instantaneous CNR and CIR is reduced remarkably when diversity systems are used [1]. For a certain average probability of error, a higher valued average CNR and CIR is in need for non-diversity systems [1]. But a smaller valued of CNR and CIR are compared to diversity systems. The overall conclusion is that maximal-ratio combining (MRC) achieves the best performance improvement compared to other combining methods. Diversity techniques are very useful to improve the performance of high speed wireless channel to transmit data and information. The problems which considered in this thesis are not new but I have tried to organize, prove and analyze in new ways. Maximal-Ratio Combining (MRC) Equal-Gain Combining (EGD) Selection Combining (SC) Carrier to Noise Ratio (CNR) Carrier to Interference Ratio (CIR) Diversity Techniques Path Loss Channel Propagation.
12	Diversidade espacial na recepção em sistemas ISDB-Tb Olandim, Richard John Lintulahti 25 June 2015 (has links) Made available in DSpace on 2016-03-15T19:37:57Z (GMT). No. of bitstreams: 1 RICHARD JOHN LINTULAHTI OLANDIM.pdf: 2276167 bytes, checksum: 0d3c0536034c612074740ab02558a1be (MD5) Previous issue date: 2015-06-25 / In Brazil, the broadcasting system for television content in high definition is the ISDB-Tb. Although robust, the content transmission in this system, like in any radio frequency propagation, can suffer from external attenuating factors, such as distortion by multipath propagation. One of the techniques used in radio communications for minimizing the effects of this type of distortion is the spatial diversity reception, which uses multiple antennas connected to a single receiver. The signals, received by different antennas, are combined, in a technique known as MRC or Maximal Ratio Combiner, so that the output signal-to-noise ratio is greater than the individual signal-to-noise ratios, allowing the successfully decoding of the received content, even though the individual signal in each antenna does not have sufficient quality to be decoded independently. This study aims to establish a method of spatial diversity in receiving television signals in ISDB-Tb, pondering between the advantages and disadvantages of their use in edge regions of coverage, where the reception of the Brazilian digital TV system is not yet total. / No Brasil, o sistema de radiodifusão para conteúdos televisivos em alta definição é o ISDB-Tb. Apesar de robusto, a transmissão de conteúdos neste sistema, como qualquer propagação em radiofrequência, pode sofrer com fatores externos atenuantes, como por exemplo a distorção por propagação em multi-percurso. Uma das técnicas utilizadas em radiocomunicação para que se minimizem os efeitos deste tipo de distorção é a diversidade espacial na recepção, que utiliza múltiplas antenas conectadas a um mesmo receptor. Os sinais, recebidos pelas diferentes antenas, são trabalhados em uma técnica conhecida como MRC ou Combinação de Máxima Razão, de modo que a relação sinal-ruído de saída seja maior do que as relações sinal-ruído individuais, permitindo a decodificação do conteúdo com sucesso, mesmo que os sinais individuais em cada antena não tenham qualidade suficiente para serem decodificados independentemente. Este estudo tem como objetivo propor um método de diversidade espacial na recepção de sinais televisivos no padrão brasileiro ISDB-Tb, ponderando entre as vantagens e desvantagens de sua utilização em regiões de borda de cobertura, onde a recepção do sistema brasileiro de TV digital ainda não é total. diversidade espacial na recepção MRC (Maximal Ratio Combiner) sistema brasileiro de TV digital radiofrequência spatial diversity reception MRC (Maximal Ratio Combiner) brazilian digital television system radio frequency CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA
13	Simulation performance of multiple-input multiple-output systems employing single-carrier modulation and orthogonal frequency division multiplexing Saglam, Halil Derya 12 1900 (has links) Approved for public release, distribution is unlimited / This thesis investigates the simulation performance of multiple-input multiple-output (MIMO) systems utilizing Alamoutibased space-time block coding (STBC) technique. The MIMO communication systems using STBC technique employing both single- carrier modulation and orthogonal frequency division multiplexing (OFDM) are simulated in Matlab. The physical layer part of the IEEE 802.16a standard is used in constructing the simulated OFDM schemes. Stanford University Interim (SUI) channel models are selected for the wireless channel in the simulation process. The performance results of the simulated MIMO systems are compared to those of conventional single antenna systems. / Lieutenant Junior Grade, Turkish Navy MIMO systems Space time codes Multiplexing Multiple-input Multiple-output (MIMO) Space-time block coding (STBC) Stanford University Interim (SUI) models Spatially correlated MIMO channels Spatial diversity Alamouti scheme Maximal ratio combining
14	Downlink Transmission Techniques For Multi User Multi Input Multi Output Wireless Communications Coskun, Adem 01 August 2007 (has links) (PDF) Multi-user MIMO (MIMO-MU) communication techniques make use of available channel state information at the transmitter to mitigate the inter-user interference. The goal of these techniques is to provide the least interference at the mobile stations by applying a precoding operation. In this thesis a comparison of available techniques in the literature such as Channel Decomposition, SINR Balancing, Joint-MMSE optimization is presented. Novel techniques for the MIMO multi-user downlink communication systems, where a single stream is transmitted to each user are proposed. The proposed methods, different from the other methods in the literature, use a simple receiver to combat the interference. It has been shown that MRC based receivers are as good as more complicated joint MMSE receivers.
15	Advanced techniques to improve the performance of OFDM Wireless LAN Segkos, Michail 06 1900 (has links) Approved for public release; distribution is unlimited / OFDM systems have experienced increased attention in recent years and have found applications in a number of diverse areas including telephone-line based ADSL links, digital audio and video broadcasting systems, and wireless local area networks (WLAN). Orthogonal frequency-division multiplexing (OFDM) is a powerful technique for high data-rate transmission over fading channels. However, to deploy OFDM in a WLAN environment, precise frequency synchronization must be maintained and tricky frequency offsets must be handled. In this thesis, various techniques to improve the data throughput of OFDM WLAN are investigated. A simulation tool was developed in Matlab to evaluate the performance of the IEEE 802.11a physical layer. We proposed a rapid time and frequency synchronization algorithm using only the short training sequence of the IEEE 802.11a standard, thus reducing the training overhead to 50%. Particular attention was paid to channel coding, block interleaving and antenna diversity. Computer simulation showed that drastic improvement in error rate performance is achievable when these techniques are deployed. / Lieutenant, Hellenic Navy Wireless LANs Multiplexing OFDM WLAN IEEE 802.11a Exponential channel model Packet detection Frame synchronization Frequency synchronization Carrier offset Phase noise Pilot phase tracking Channel estimation Equalization Scrambling Convolutional coding Interleaving Maximal ratio combining Selection diversity Viterbi algorithm Soft decision decoding Puncturing
16	Διερεύνηση των τεχνικών παραμέτρων για την μεγιστοποίηση της ποιότητας των παρεχομένων υπηρεσιών στα συστήματα MIMO Φραγκιαδάκης, Αλέξανδρος 01 February 2013 (has links) Στην παρούσα διπλωματική εργασία μελετάμε τα πλεονεκτήματα που επιφέρει η χρήση πολλαπλών κεραιών στον πομπό και στον δέκτη, κατά την μετάδοση, με στόχο την βελτίωση των παρεχομένων υπηρεσιών στο χρήστη. Στο Κεφάλαιο 1, γίνεται μια ιστορική αναδρομή των ασύρματων επικοινωνιών καθώς των σύγχρονων ασύρματων τεχνολογιών και κεραιών που χρησιμοποιούνται. Στη συνέχεια γίνεται μια αναφορά στις έννοιες του διαφορισμού, του κέρδους διάταξης και της χωρικής πολυπλεξίας οι οποίες συνδέονται άρρηκτα με τα συστήματα MIMO. Στο Κεφάλαιο 2, αναφερόμαστε σε όλα εκείνα τα χαρακτηριστικά που περιγράφουν το ασύρματο κανάλι και εξάγουμε την γραμμική σχέση εισόδου-εξόδου του ασύρματου καναλιού. Στην συνέχεια γίνεται μια ανάλυση των στοχαστικών μοντέλων περιγραφής του ασύρματου διαύλου διαλείψεων και πιο συγκεκριμένα των μοντέλων Rayleigh και Rice. Στο Κεφάλαιο 3 εξετάζουμε την αξιοπιστία διαφόρων τύπων κεραιοσυστημάτων, ως προς τον ρυθμό των ρυθμό των λανθασμένων συμβόλων στον δέκτη. Πιο συγκεκριμένα εξετάζεται η τεχνική Maximal Ratio Combining για τα συστήματα SIMO καθώς και του σχήματος Alamouti για τα συστήματα ΜISO. Συνεχίζοντας στα MIMO συστήματα αναλύουμε τις μεθόδους ισοστάθμισης για την ανάκτηση των δεδομένων, και πιο συγκεκριμένα τις τεχνικές Zero Forcing, Minimum Mean Square Error,V-Blast και καθώς και την βέλτιστη τεχνική Maximum Likelihood. Στο τελευταίο μέρος της εργασίας αναλύουμε τα πλεονεκτήματα των MIMO συστημάτων, ως προς την χωρητικότητα που προσφέρουν, σε στοχαστικά κανάλια διαλείψεων.Στη συνέχεια, γίνεται αναφορά στην μέθοδο SVD και στην αναπαράσταση του MIMO καναλιού από έναν αριθμό ανεξάρτητων SISO διαύλων. Κλείνοντας αναφέρουμε την μέθοδο βέλτιστης κατανομής ισχύος στις κεραίες του πομπού Water-filling, και στην περαιτέρω αύξηση της χωρητικότητας του διαύλου που προσφέρει. / In this diploma thesis we are investigating the benefits of using Multiple Input and Multiple Output antennas in information transmission, with final goal to improve Quality of Service. The first Chapter, includes a historical background of the wireless communications but also is a reference to the modern wireless and antenna technologies. Moreover, we introduce the definition of new concepts, such as diversity and array gain and also spatial multiplexing, which are closely connected with MIMO technology. In the second chapter, we introduce the characteristics which they are describe the wireless channel, while simultaneously we mention the linear input-output relationship of the wireless channel. Additionally, we analyze the stochastic wireless channel models, namely the Rayleigh and the Rician fading models. In the third chapter, we investigate the reliability of different types of antenna topologies, regarding the pace of the invalid symbols in the transmitter. More specifically, we examine the Maximal Ratio Combining and Alamouti technique, for SIMO and MISO systems respectively. The next step is to analyze the equalization methods, which are used in MIMO antennas, and more specifically are, Zero Forcing, Minimum Mean Square Error and V-Blast receivers, but also the optimal Maximum Likelihood equalizer. In the last part of this Thesis, we investigate the benefits of MIMO systems regarding the Capacity, in random channels. Also, a reference to the SVD method has been made,which we use to analyze the MIMO channel, in a number of parallel SISO channels. Lastly, we use the water-filling method to allocate, with the optimal way, the given power in the transmit antennas, a fact that leads to even greater Capacity gain. Κέρδος διαφορισμού Χωρική πολυπλεξία Σενάριο Alamouti Διαλείψεις Rayleigh 621.384 Wireless communication Digital communication Quality of service Diversity gain Array gain Spatial multiplexing Alamouti scheme Maximal ratio combining Rayleigh fading Zero forcing equalizers V-blast receivers Maximum likelihood receivers Channel capacity Waterfilling algorithms MIMO
17	The Application of Multiuser Detection to Spectrally Efficient MIMO or Virtual MIMO SC-FDMA Uplinks in LTE Systems. Ben Salem, Aymen 20 December 2013 (has links) Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters. SC-FDMA SC-FDE 3GPP Long Term Evolution Single Carrier Systems Single Carrier Systems Single Carrier FDE Single Carrier FDMA Localized Subcarrier Mapping Distributed Subcarrier Mapping OFDMA MIMO SC-FDMA Spatial Diversity Gain Spatial Multiplexing Gain MIMO Channel SIMO Channel Space Diversity on Receive Techniques Selection Combining Equal-gain Combining Maximal-ratio Combining MRC Channel Equalization Zero-forcing Equalization Minimum Mean-square Error Equalization ZF MMSE SC-FDMA with Multiuser Detection Link Level Simulation V-blast
18	The Application of Multiuser Detection to Spectrally Efficient MIMO or Virtual MIMO SC-FDMA Uplinks in LTE Systems. Ben Salem, Aymen January 2014 (has links) Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters. SC-FDMA SC-FDE 3GPP Long Term Evolution Single Carrier Systems Single Carrier Systems Single Carrier FDE Single Carrier FDMA Localized Subcarrier Mapping Distributed Subcarrier Mapping OFDMA MIMO SC-FDMA Spatial Diversity Gain Spatial Multiplexing Gain MIMO Channel SIMO Channel Space Diversity on Receive Techniques Selection Combining Equal-gain Combining Maximal-ratio Combining MRC Channel Equalization Zero-forcing Equalization Minimum Mean-square Error Equalization ZF MMSE SC-FDMA with Multiuser Detection Link Level Simulation V-blast
19	Performance evaluation and protocol design of fixed-rate and rateless coded relaying networks Nikjah, Reza 06 1900 (has links) The importance of cooperative relaying communication in substituting for, or complementing, multiantenna systems is described, and a brief literature review is presented. Amplify-and-forward (AF) and decode-and-forward (DF) relaying are investigated and compared for a dual-hop relay channel. The optimal strategy, source and relay optimal power allocation, and maximum cooperative gain are determined for the relay channel. It is shown that while DF relaying is preferable to AF relaying for strong source-relay links, AF relaying leads to more gain for strong source-destination or relay-destination links. Superimposed and selection AF relaying are investigated for multirelay, dual-hop relaying. Selection AF relaying is shown to be globally strictly outage suboptimal. A necessary condition for the selection AF outage optimality, and an upper bound on the probability of this optimality are obtained. A near-optimal power allocation scheme is derived for superimposed AF relaying. The maximum instantaneous rates, outage probabilities, and average capacities of multirelay, dual-hop relaying schemes are obtained for superimposed, selection, and orthogonal DF relaying, each with parallel channel cooperation (PCC) or repetition-based cooperation (RC). It is observed that the PCC over RC gain can be as much as 4 dB for the outage probabilities and 8.5 dB for the average capacities. Increasing the number of relays deteriorates the capacity performance of orthogonal relaying, but improves the performances of the other schemes. The application of rateless codes to DF relaying networks is studied by investigating three single-relay protocols, one of which is new, and three novel, low complexity multirelay protocols for dual-hop networks. The maximum rate and minimum energy per bit and per symbol are derived for the single-relay protocols under a peak power and an average power constraint. The long-term average rate and energy per bit, and relay-to-source usage ratio (RSUR), a new performance measure, are evaluated for the single-relay and multirelay protocols. The new single-relay protocol is the most energy efficient single-relay scheme in most cases. All the multirelay protocols exhibit near-optimal rate performances, but are vastly different in the RSUR. Several future research directions for fixed-rate and rateless coded cooperative systems, and frameworks for comparing these systems, are suggested. / Communications acknowledgment signals amplify-and-forward relaying average capacity average power constraint bit error rate cooperative gain cooperative communication decode-and-forward relaying degree of freedom direct transmission distributed space-time coding dual-hop relaying energy efficiency energy per bit energy per symbol feedback communication fixed-rate coded relaying fixed-rate codes fixed-rate coding large SNR approximation maximal ratio combining maximum achievable rates maximum likelihood multiple access channels mutual information nonconcave fractional programming numerical optimization optimal power allocation orthogonal relaying outage optimality outage probability parallel channel coding peak power constraint power allocation schemes power fairness protocol design rateless coded relaying rateless codes rate efficiency rateless coding Rayleigh fading relay-to-source usage ratio relaying networks repetition coding selection relaying single-hop communication superimposed relaying symbol error rate
20	Performance evaluation and protocol design of fixed-rate and rateless coded relaying networks Nikjah, Reza Unknown Date No description available. acknowledgment signals amplify-and-forward relaying average capacity average power constraint bit error rate cooperative gain cooperative communication decode-and-forward relaying degree of freedom direct transmission distributed space-time coding dual-hop relaying energy efficiency energy per bit energy per symbol feedback communication fixed-rate coded relaying fixed-rate codes fixed-rate coding large SNR approximation maximal ratio combining maximum achievable rates maximum likelihood multiple access channels mutual information nonconcave fractional programming numerical optimization optimal power allocation orthogonal relaying outage optimality outage probability parallel channel coding peak power constraint power allocation schemes power fairness protocol design rateless coded relaying rateless codes rate efficiency rateless coding Rayleigh fading relay-to-source usage ratio relaying networks repetition coding selection relaying single-hop communication superimposed relaying symbol error rate

Search results