Le remplacement de monomères d'origine pétrosourcée par des analogues biosourcés améliore la durabilité et diminue la dépendance aux ressources fossiles. De plus, de nouvelles caractéristiques et propriétés sont souvent découvertes. Les polyesters aliphatiques biosourcés ont déjà partiellement remplacé les produits traditionnels. Dans le contexte du projet Sorago, une résine entièrement biosourcée pour les revêtements de prélaquage des produits intérieurs a déjà été introduite sur le marché (Estetic® bio Air, Arcelor Mittal). Pour permettre l'utilisation du produit dans des applications extérieures, sa résistance à la lumière UV et à l'humidité sont à améliorer. Cela pose deux problèmes : Une disponibilité limitée de monomères pouvant introduire de la rigidité dans la résine et la relation entre la structure de la résine et sa dégradation. La vanilline a été choisie comme synthon pour la gamme des monomères rigides et biosourcées. La transformation de sa fonction aldehyde par réaction de Perkin et sa réactivité a été examinée. Dans une série des copolymerisations, l'influence des conditions de réaction sur la composition du produit final a été proposée. Une relation structure-propriétés concernant la température de la transition vitreuse et la viscoélasticité des plusieurs monomères biosourcées a été établie, et comparée avec celle des monomères petrosourcées. Une série des prototypes avec des propriétés très variées a été soumise à un test de vieillissement rapide. Leur dégradation a été suivie sur la base de leur rétention de brillance, par FTIR et par des tests de µ-dureté et d'épaisseur des films. La performance des prototypes biosourcés s'est révélée inférieure à celle d'une résine standard pétrosourcée mais aucune évidence qui suggère que cela est du à la présence des monomères biosourcées n'a été détectée. Cela suggère que la création d'une résine biosourcée et suffisamment durable pour l'extérieur sera possible / Moving away from petroleum and towards biobased materials not only leads to greater sustainability and lower dependence on diminishing fossil resources, but can also catalyse the discovery of new properties. Aliphatic polyesters based on renewable resources have already started to replace traditional products. Within the Sorago project, a fully biobased resin for interior coil coatings has recently been proposed on the market (Estetic® Bio Air, Arcelor Mittal). In order to extend the possible use of the biobased product to exterior applications, an improvement of its resistance to humidity and UV radiation is crucial. This presents two challenges: The limited availability of monomers which provide rigidity in the resin structure and the relationship between the resin composition and its weatherability. Vanillin was chosen as a possible extension to the range of rigid, biobased monomers for polyesterification reactions. The transformation of its aldehyde and its reactivity was studied in terms of catalytic activation and through a series of copolymerisations which revealed the influence of the reaction conditions on the composition of the product. A structure-property relationship concerning the coating glass transition temperature and visco-elastic behaviour of the coating was furthermore established for a series of renewable monomers and contrasted with petroleum based equivalents. Series of prototypes with a wide variety of properties were then subjected to accelerated weathering tests. Their degradation was followed directly by gloss retention and different mechanisms were revealed using FTIR, µ-hardness and film thickness measurements. While the performance of the biobased coating was subpar, no evidence linking its degradation to the presence of renewable monomers was found, suggesting that the creation of a sufficiently durable and renewable exterior coating will be possible

Thesis (MScAgric (Animal Sciences))--University of Stellenbosch, 2011. / Includes bibliography. / ENGLISH ABSTRACT: Two studies were done to determine the distribution rate and efficiency of dietary melamine (MEL) to poultry meat and eggs. The possibility of MEL distribution into meat and eggs after feeding cyromazine (CYR) was also investigated. Five separate diets were formulated for broiler and layer chickens containing graded levels of MEL. In the broiler trial (Experiment 1), a number of 480 day-old Cobb 500 broiler chickens were divided into five treatment groups. Diets contained 0 (CON), 50 (MEL50), 100 (MEL100), 500 (MEL500) mg/kg MEL or 4 mg/kg CYR (CYR4). The duration of the trial was 36 days and breast muscle, kidney and liver samples were harvested on Days 11, 13, 15, 18, 22, 29 and 36 after the start of the feeding and analyzed for MEL. For the duration of the trial, all experimental diets were presented ad libitum and feed intake, weight gain, mortality rate, feed conversion ratio (FCR), protein efficiency rate of birds and the European production efficiency rate were determined. In the layer trial (Experiment 2), 120 Hyline Silver hens (24 weeks of age) were randomly divided into five treatment groups. The treatment diets were the same as for Experiment 1. The duration of the trial was 20 days and layers received the treatment diets for the first 10 days after which the control diet was provided for another 10 days. Feed intake, mortality rate, egg production and egg weights were recorded daily, while live weight was recorded at the beginning and end of the trial. Dietary MEL levels of up to 500 mg/kg did not have any detrimental effect on production parameters for broilers. In the layer trial, feed intake and egg weights were negatively affected by the MEL500 treatment. Dietary MEL was absorbed by broilers and layers and rapidly distributed to the kidneys, livers, muscles and eggs. As the dietary MEL concentration increased from 50 and 100 mg/kg to 500 mg/kg, an increase (P < 0.01) was observed in muscle tissue and egg MEL residue concentrations. Melamine concentration for broilers peaked at 22 days of age and decreased until day of slaughter. The kidneys contained the highest MEL residue levels, compared to other organ tissues, such as muscle and liver. In layer hens, a MEL distribution plateau in eggs was reached between Days 1 and 4 and decreased from Day 7 to 10. The distribution of MEL in eggs was higher to albumin than to the yolk. Upon withdrawal, MEL concentration in these tissues declined to undetectable levels within seven days. No MEL could be detected in meat or eggs when birds received the CYR4 treatment. The distribution efficiency (DEf) of MEL to meat and eggs did not appear to be dose dependant. For meat, the DEf varied between 1.2 and 2.7% and for eggs it varied between 0.7 and 0.8%. / AFRIKAANSE OPSOMMING: Twee studies is uitgevoer om die verspreidings tempo en effektiwiteit van melamien (MEL) na hoender vleis en -eiers te bepaal. Die moontlikheid van MEL verspreiding na vleis en eiers deur die voeding van cyromazien (CYR) is ook ondersoek. Vyf aparte diëte is geformuleer vir braaikuikens en lê-henne wat verskillende MEL insluitings vlakke bevat het. Vir die braaikuiken proef (Eksperiment 1), is 480 dag oud Cobb 500 braaikuikens ingedeel in vyf behandelings groepe. Diëte het 0 (CON), 50 (MEL50), 100 (MEL100), 500 (MEL500) mg/kg MEL en 4 mg/kg CYR (CYR4) bevat. Die tydsduur van hierdie proef was 36 dae en bors-, spier-, nier- en lewer monsters is ingesamel op Dae 11, 13, 15, 18, 22, 29 en 36 wat geëvalueer is vir MEL. Tydens die verloop van die proef is alle eksperimentele diëte ad libitum gevoer en voerinname, massa toename, mortaliteit, voeromsettings verhouding, proteïen effektiwiteits tempo asook die Europese produksie effektiwiteits tempo is bepaal. Vir die lê-hen proef (Eksperiment 2), is 120 Hyline Silver henne (24 weke oud) ewekansig verdeel in vyf behandelings groepe. Die behandelings diëte het dieselfde MEL en CYR konsentrasies bevat as Eksperiment 1. Die tydsduur van hierdie proef was altesaam 20 dae waarvan henne behandelings diëte vir die eerste 10 dae ontvang het, waarna henne vir die daarop volgende 10 dae ‘n kontrole dieët wat 0 mg/kg MEL bevat gevoer is. Voerinname, mortaliteit, eier produksie en eier gewig is daagliks opgeteken, terwyl lewende massa aan die begin en einde van die proef gemeet is. Melamien dieët vlakke tot 500 mg/kg het geen negatiewe effek op braaikuiken produksie parameters gehad nie. Vir lê-henne, is slegs voerinname en eier gewig negatief beïnvloed vir MEL500. Melamien is na inname geabsorbeer deur braaikuikens en lê-henne en het vinnig versprei na die niere, lewer, spiere en eiers. Soos die MEL vlakke van die behandelings diëte toegeneem het van 50 en 100 mg/kg na 500 mg/kg, het ‘n beduidende (P < 0.01) toename in spierweefsel en eier MEL residu konsentrasies voorgekom. Melamien konsentrasies vir braaikuikens het gepiek op 22 dae en geleidelik afgeneem tot op dag 36. In lê-henne het ‘n MEL verspreidings platu in eiers plaasgevind tussen Dag 1 en 4 en geleidelik afgeneem tydens Dag 7 en 10. Die niere het die hoogste MEL residu vlakke bevat in vergelyking met die lewer- en spierweefsels. Die verspreiding van MEL in eiers was hoër na die albumien as na die dooier. Tydens onttrekking het die MEL konsentrasie vlakke in hierdie weefsels in so ‘n mate afgeneem dat dit onbespeurbaar was binne sewe dae. Geen MEL kon in vleis- en eiermonsters gemeet word vir CYR4 nie. Die verspreidings doeltreffendheid (DEf) van MEL na vleis en eiers was nie dosis afhanklik nie. Vir vleis het die DEf gevarieër tussen 1.2 en 2.7% en vir eiers tussen 0.7 en 0.8%.

Thesis (PhD)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: In this study, five trials were conducted to examine in vitro and in vivo degradation, excretion and absorption parameters of melamine (MEL) in dairy cows that have not been studied before or where limited information is available. The first two trials were in vitro studies conducted to determine the extent of MEL degradation in rumen liquor and the effects of MEL on ruminal ammonia (NH3) and volatile fatty acid (VFA) concentrations. For both trials, rumen liquor was collected from ruminally cannulated lactating Holstein cows. For the first and second trial, rumen liquor was collected from three and two cows, respectively. For both trials, Erlenmeyer flasks contained 1 g substrate and 100 mL incubation medium consisting of 20 mL rumen liquor and 80 mL reduced buffer solution. In the first trial, each flask contained 100 mg of MEL, resulting in an initial MEL concentration of 1000 mg/L. The flasks were incubated at 39° C for 0 (Control), 6, 24 or 48 hours under strictly anaerobic conditions. In all the trials, MEL concentrations were determined by LC/MSMS. MEL degradation was low after 6 and 24 h of incubation (3.2 and 5.5%, respectively) and increased to 13.6% after 48 h of incubation. In the second trial where VFA and NH3 concentrations were determined, the flasks contained either 0 (Control), 0.2 (T1) or 0.4 mg (T2) of MEL. The flasks were incubated for 6, 24 or 48 h. Treatment had no effect on individual or total VFA concentrations or NH3 concentrations at 6 and 48 h. At 24 h, T2 resulted in an inexplicable higher NH3 concentration. This study showed that the addition of melamine would not result increased rumen NH3 concentrations in vitro. Melamine would also not affect the production of different VFA’s. Therefore, it was concluded that the rumen micro-organisms present in rumen liquor would be unable to utilize MEL as a source of nitrogen and that the microbial production of VFA’s remains unaffected by the presence of MEL. In the third trial, MEL excretion in lactating cows was determined. Five cows were randomly allocated to treatments according to a 5 x 5 Latin square design. Cows received the treatment diets for 7 d followed by 8 d of MEL withdrawal during each of the five periods. The experimental treatments were formulated to provide a daily MEL intake of 0 (M0), 500 (M1), 1000 (M2), 5000 (M3) or 10000 mg (M4) via 15 kg of dairy concentrate pellets. Calculations based on the work of Newton & Utley (1978) suggested that a melamine intake of 0.16 g/kg of live weight would not result in detrimental health effects of ruminant animals. Therefore, a 600 kg lactating dairy cow should not be at risk when consuming 100 g of melamine. In this trial, the highest melamine treatment (M4 = 10 g/d) included a 10-fold safety factor from the suggested safe amount from the work of Newton & Utley (1978) and should not pose a health risk to the cows. Treatments had no effect on DMI, milk yield or milk composition. MEL was detected in the milk 8 h after initial MEL ingestion, increased rapidly and peaked on d 3 and was undetectable after 8 d. Treatments had no effect on MEL excretion efficiencies which ranged from 1.5 to 2.1%. The mean apparent digestibility of MEL was 78%. Mean faecal and urinary MEL excretions were 22 and 54 % of ingested MEL, respectively. Higher milk, urine and faecal MEL concentrations were observed with higher levels of dietary MEL. It was concluded that MEL appeared in the milk soon after first ingestion and a withdrawal period of 8 d was required for all milk, faecal and urine samples to reach undetectable levels of MEL. Urine and faeces were the primary routes for MEL excretion. The fourth trial was conducted to determine MEL absorption by the mammary gland in lactating dairy cows through arterio-venous (A-V) difference. Five cows received 10 g of MEL/d for three consecutive days. Day 3 of the trial was selected for commencement of blood sampling as previous studies (Cruywagen et al., 2009; Shen et al., 2010; Sun et al., 2011) reported the milk melamine concentration to reach a peak on d 3 of continuous melamine consumption by dairy cows. Early on d 3, catheters were inserted into the caudal superficial epigastric vein (milk vein) and caudal auricular artery. The blood sampling period commenced after residual milk removal from the udder following oxytocin administration. Blood from both locations were collected hourly for 9 hours. Following the final blood collection, oxytocin was administered again, catheters were carefully removed and cows were milked immediately thereafter. All blood samples were centrifuged and the decanted plasma was analysed for MEL, as well as for amino acid contents to calculate mammary blood flow. The positive MEL flux (calculated from A-V difference) confirmed net absorption of MEL into the mammary gland with an efficiency of absorption of 0.29%. Melamine excretion into milk was 5.63 mg/h. The mean plasma and milk MEL concentrations were 5.2 and 3.9 mg/kg, respectively. Melamine excretion efficiency to milk, expressed as percentage of the ingested amount, was 1.47%. It was concluded that melamine ingested by cows will result in net MEL absorption by the mammary gland, but that the absorption efficiency is low. The final trial of the study aimed to determine the effects that fermentation processes during the manufacturing of cheese, yoghurt and kefir would have on their MEL content if these products were made from MEL contaminated milk. Another objective was to determine if MEL in cheese would be degraded during the curing process. Cheese, yoghurt and kefir were made from milk with a MEL content of 6.77 mg/kg. The cheese was then cured for 2 wk at 6° C. The MEL contents of the yoghurt and kefir were 6.76 and 6.78 mg/kg, respectively, indicating that the different fermentation processes used in yoghurt and kefir production had no effect on their MEL content and that MEL was not degraded during the short fermentation periods. The percentage of milk MEL partitioned to whey and cheese were 97.4 and 6.5 %, respectively. It was concluded that the different fermentation processes involved during the manufacturing of yoghurt and kefir from MEL tainted milk did not decrease the MEL concentration. The milk MEL was predominantly partitioned to whey, with little MEL transferred to cheese. It was also concluded that MEL was not degraded in cheese during a 2-wk curing period. It was finally concluded that dietary MEL is readily absorbed by dairy cows and mainly excreted via the urine. The mammary gland has a low affinity for MEL absorption and approximately 2% of ingested MEL is excreted in the milk. When cheese is made from MEL tainted milk, the majority of MEL will concentrate in the whey fraction and only 6.5% will be present in the cheese. / AFRIKAANSE OPSOMMING: Vyf proewe is gedoen om in vitro- en in vivo-degradering, uitskeiding en absorpsie parameters van melamien (MEL) na te gaan waaroor daar min of geen inligting bekend was nie. Die eerste twee proewe was in vitro-studies, uitgevoer om die mate van MEL degradeerbaarheid in rumenvloeistof na te gaan, asook die invloed van MEL op rumen-NH3 en vlugtige vetsuur (VVS)-konsentrasies. Vir beide proewe is rumenvloeistof van lakterende, rumengekannuleerde Holsteinkoeie verkry. Vir die eerste en tweede in vitro-studies, was rumenvloeistof verkry vanaf drie en twee koeie, onderskeidelik. In albei proewe is 1 g substraat in Erlen-meyerflessies afgeweeg en 100 mL inkubasiemedium bygevoeg wat uit 20 mL rumenvloeistof en 80 mL van ‘n buffermedium bestaan het. In die eerste proef is 100 mg MEL by die substraat gevoeg, sodat die aanvanklike MEL konsentrasie in die flessies 1000 mg/L was. Die flessies is by 39° C geïnkubeer vir 0 (Kontrole), 6, 24 of 48 ure, onder streng anaerobiese kondisies. Met die beïndiging van die inkubasieperiode is 100 mL van ‘n 0.2 M perchloorsuuroplossing bygevoeg om enige melamien wat nie gedegradeer was nie, op te los. In al die proewe is melamienbepalings by wyse van LC/MSMS gedoen. Melamiendegradering was laag na 6 en 24 h inkubasie (3.2 en 5.5%, respektiewelik) en teen 48 h inkubasie het dit toegeneem tot 13.6%. In die tweede proef het die flessies 0 (Kontrole), 0.2 (T1) of 0.4 mg (T2) melamien bevat. Behandeling het geen invloed op individuele of totale VVS-konsentrasies by enige van die inkubasietye gehad nie en ook nie op NH3-konsentrasies by 6 en 48 h nie. Om een of ander onverklaarbare rede het die T2-behandeling gelei tot hoër NH3-konsentrasies by 24 h. Die gevolgtrekking is gemaak dat die byvoeging van MEL geen effek op rumen NH3-konsentrasies het nie en dat die mikroorganismes in die rumen nie daartoe in staat sal wees om MEL as ‘n stikstof-bron sal kan benut nie. In die derde proef is die uitskeiding van MEL in melkkoeie ondersoek. Vyf lakterende Holsteinkoeie is ewekansig aan vyf behandelings toegeken in ‘n 5 x 5 Latynsevierkantontwerp. Gedurende elke periode het koeie die behandelings vir 7 d ontvang, gevolg deur ‘n 8 d MEL-onttrekkingsperiode. Die eksperimentele diëte is geformuleer om ‘n daaglikse MEL-inname van 0 (M0), 500 (M1), 1000 (M2), 5000 (M3) of 10000 mg (M4) per koei/dag te verseker, toegedien via 15 kg/d van ‘n suiwelkonsentraat in pilvorm. Berekeninge gebasseer op die werk van Newton & Utley (1978) stel voor dat ‘n MEL inname van 0.16 g/kg lewende massa, geen negatiewe effek op herkouers se gesondheid sal hê nie. Dus, ‘n koei wat 600 kg weeg, sal geen skade lei deur die inname van 100 g MEL nie. In hierdie proef was die hoogste MEL behandeling (M4 = 10g/d) tien keer laer as die voorgestelde veiligheidsvlak van Newton & Utley (1978). Behandeling het geen invloed op DMI, melkopbrengs of melksamestelling gehad nie. Melamien is so gou as 8 h na eerste inname in die melk waargeneem, waarna die konsentrasie vinnig toegeneem het en ‘n piek na 3 d bereik het. Behandeling het geen invloed op die uitskeidingsdoeltreffendheid van melamien in melk gehad nie en waardes het gewissel van 1.5 tot 2.1%. Die gemiddelde skynbare verteerbaarheid van MEL was 78%. Die gemiddelde mis- en uriene-MEL-konsentrasies was 22 en 54%, onderskeidelik. Hoër melk-, mis- en uriene-MEL-konsentrasies is waargeneem namate die MEL-inhoud van die diëte gestyg het. Die gevolgtrekking is gemaak dat MEL spoedig na eerste inname in die melk verskyn en dat ‘n onttrekkingsperiode van 8 d benodig word voordat melk-, mis- en uriene-MEL onwaarneembare vlakke bereik. Uriene en mis is die primêre uitskeidingsroetes van ingenome MEL. Die vierde proef is onderneem om MEL-absorpsie in die melkklier met behulp van arterio-veneuse (A-V) verskille te ondersoek. Vyf koeie het elk 10 g MEL/d vir drie agtereen-volgende dae ontvang. Dag 3 van die proef is gekies vir bloedkolleksies aangesien vorige studies (Cruywagen et al., 2009; Shen et al., 2010; Sun et al., 2011) gewys het dat melk MEL op dag 3 van MEL inname, piek konsentrasies beryk. Vroeg gedurende die oggend van d 3 is kateters in die kaudale oppervlakkige epigastriese aar (melkaar) en die kaudale aurikulêre slagaar geplaas. Die bloedtrekkingsperiode het ‘n aanvang geneem direk nadat die koeie volledig uitgemelk is na toediening van oksitosien om te verseker dat soveel as moontlik residuele melk verwyder word. Monsters van veneuse-, sowel as arteriële bloed, is 9-uurliks geneem. Na die finale bloedtrekking is oksitosien weer toegedien, die kateters is versigtig verwyder en die koeie is direk daarna weer gemelk. Al die bloedmonsters is gesentrifugeer en plasmamonsters is ontleed vir MEL, asook vir aminosuursamestelling ten einde bloedtoevoer na die uier te bereken. Die positiewe fluks (bereken van A-V verskil) het bevestig dat netto MEL absorpsie in die melkklier plaasvind, met ‘n doeltreffendheid van 0.29%. Melamienuitskeiding in die melk was teen ‘n tempo van 5.63 mg/h. Die gemiddelde plasma- en melk-MEL konsentrasies was 5.2 en 3.9 mg/kg, onderskeidelik. Die uitskeidingsdoeltreffendheid van MEL na melk, uitgedruk as persentasie van ingenome MEL, was 1.47%. Die gevolgtrekking is gemaak dat MEL wat deur koeie ingeneem word, tot netto MEL-absorpsie in die melkklier sal lei, maar dat die absorpsiedoeltreffendheid baie laag is. In die finale proef is daar gepoog om die invloed van fermentasieprosesse gedurende die vervaardiging van kaas, joghurt en kefir op die produkte se melamieninhoud na te gaan indien die produkte van melamienbevattende melk gemaak sou word. ‘n Tweede doel van hierdie proef was om te bepaal of MEL in kaas gedegradeer kan word tydens rypwording. Kaas, joghurt en kefir is gemaak van melk wat ‘n MEL-inhoud van 6.77 mg/kg gehad het. Die kaas is vervolgens vir twee weke by 6° C rypgemaak. Die MEL-inhoud van die joghurt en kefir was 6.76 en 6.78 mg/kg, onderskeidelik, wat daarop dui dat die onderskeie fermentasieprosesse wat tydens die bereiding van joghurt en kefir plaasvind, geen invloed op hul MEL-inhoud gehad het nie en dat MEL nie gedurende hierdie kort fermentasieperiodes gedegradeer is nie. Die persentasie MEL na wei en kaas versprei was 97.4 en 6.5%, onderskeidelik. Die gevolgtrekking is gemaak dat die verskillende fermentasieprosesse betrokke tydens die vervaardiging van joghurt en kefir wat van melamienbesmette melk gemaak word, nie die MEL-konsentrasie verlaag het nie. Tydens die vervaardiging van kaas, word die MEL hoofsaaklik na die weikomponent versprei en baie min na kaas. Melamien word ook nie in kaas afgebreek gedurende ‘n verouderingsproses van twee weke nie. Die finale gevolgtrekkings is gemaak dat MEL maklik deur melkkoeie geabsorbeer word en dat die hoof uitskeidingsroete via urine is. Die uier het ‘n lae affiniteit vir MEL absorpsie en ongeveer 2% van ingenome MEL is in die melk uitgeskei. Wanneer kaas van MEL besmette melk gemaak word, sal die meerderheid van die MEL in die weifraksie konsentreer, met slegs 6.5% teenwoordig in die kaas. / The Hennie Steenberg Trust Fund, the Ernst and Ethel Erickson Trust and the National Research Foundation (NRF) for their financial support

Many products used in our everyday life contain chemicals added to give them specific properties. Flame retardants (FRs) are added to prevent or retard fires in textiles, plastics etc., while plasticizers are supplied to make plastics more flexible. Through their widespread applications chemicals from both groups are emitted and spread in the environment during usage and disposal. For a long time these products were mainly disposed of in landfills, and in many areas they still are. Thus, since some of these chemicals also pose potential environmental risks and health hazards, there is a need to elucidate their fates during exposure to the landfill environmentThe objectives of this thesis were to investigate the leaching and transformation of FRs and plasticizers from products in which they are used under simulated landfill conditions. To assess the importance of changes in these processes as landfills progress through recognised ageing phases (accompanied by large transitions in both physico-chemical and biological conditions) it was desirable to simulate the changes that typically occur in landfills within a short time period, of 1-2 years.. This was achieved using the newly developed intermediate-scale (3 litre) Modular Environmental Test System (METS).The METS were employed in two studies. The first was an investigation of the leaching and degradation of plasticizers from PVC carpet material incubated at different temperatures (20, 37, 55 and 70°C) prevailing in landfills. Plasticizers subjected to this investigation were the phthalates di-2-ethylhexyl phthalate (DEHP) and benzyl-butyl phthalate (BBP), both of which were found to leach from the carpet. The leaching of DEHP and BBP generally increased with increases in the incubation temperature. However, the most rapid leaching of BBP occurred at 37°C, probably due to high microbial activity at this temperature. Both DEHP and BBP were shown to be degraded within the landfill environment and the degradation potential was highest during the methanogenic landfill phase. In the second METS study the leaching of FRs used in both reactive and additive applications (i.e. chemically bonded to and merely blended with the material, respectively) was characterised. The epoxy oligomer tetrabromobishpenol A (TBBPA) and the phosphorus-based Pyrovatex FRs were selected as representatives for the reactive FRs, while the nitrogen-based melamine and phosphorus-based Proban FRs were selected to represent additive classes. During the incubations, which lasted more than two years, the leaching from melamine was shown to be affected by the landfill phase development. The leaching from the Pyrovatex-treated material and the TBBPA epoxy oligomer seemed to result almost entirely from the washout of unreacted manufacturing residuals. This was also probably true for the FR in the Proban-treated material, although it is durable (despite being additively applied) and thus seemed to leach more slowly (manifested as an increase in phosphate levels in the leachate towards the end of the monitoring period).Finally, due to the paucity of knowledge regarding the fate of ether derivatives of TBBPA (which are also used as FRs) an anaerobic degradation assay was performed. The method employed for this assay was a modified, small-scale ISO standard method. In order to evaluate the degradation assay a uniform analytical protocol was developed. The degradation survey showed that losses of TBBPA, TBBPA-dimethyl ether and bisphenol A dimethyl ether occurred, but no losses of the most hydrophobic compound, TBBPA-dibromopropyl ether, were observed. / Många av de varor och produkter vi kommer i kontakt med dagligen innehåller kemikalier, som tillsats för att materialen i produkterna skall få specifika egenskaper. Till dessa sk funktionella kemiska föreningar hör till exempel flamskyddsmedel och mjukgörare. Den förra förhindrar att produkter fattar eld eller minskar omfattningen av brand. Mjukgörare ingår fr a i plaster för att dessa skall bli smidiga och formbara. Eftersom stora mängder av dessa substanser används eller har använts i produkter i samhället har de spridits till många miljöer. Produkterna hamnar ofta på soptipp, då de inte används mer eller är utnötta. Eftersom flera av dessa substanser innebär risk för hälsa och miljö, är det påkallat att utreda hur de beter sig i soptippsmiljön.Syftet med detta avhandlingsarbete är att undersöka eventuell frisättning och omvandling av dessa två typer av funktionella kemikalier i deponimiljö. Sedan tidigare vet man att sådan frisättning kan var starkt kopplad till åldern och därmed utvecklingen av den kemiska och fysiska miljön förändrats fr a genom tillväxten av mikroorganismer i soptippen. För att komma åt att studera frisättningen under de för deponier karakteristiska utvecklingsfaserna utvecklades en metod (Modualr Environmetal Test System; METS) för att simulera faserna över relativt kort tid (ca 1-2 år). I avhandlingen presenteras två studier, där METS utnyttjats: 1) Frisättning av mjukgörare från en PVC-matta i relation till temperaturer, som uppträder i soptippar (20-70oC) samt 2) Läckage av olika flamskyddsmedel i reaktiv respektive additiv användning studerades för olika applikationer. Vid reaktive applikation är flamskyddsmedlet kovalent bundet till polymeren i produktmaterialet, medan det additivt använda flamskyddsmedlet är inblandat i materialet.Två ftalater (di-2-etylhexyl ftalat, DEHP och bensyl-butyl ftalat (BBP), visade sig läcka från mattan, vilket ökade med högre temperature. De frisattes dock som mest vid 37oC, vilket sannolikt beror på den höga mikrobiella aktiviteten vid denna temperatur. Båda ftalterna bröts ned i soptippsmiljön och hastigheten var störst i den metanogena fasen.En epoxyoligomer (tetrabromobishpenol A TBBPA) och Pyrovatex, som bygger på en fosforförening, användes som modeller för reaktiva flamskyddsmedel. Melamin, som klassas som ett kvävebaserat flamskyddsmedel, fick tillsammans med Proban (fosforbaserat) represen-tera de som används additivt. Medan en frisättning av melamin kunde relateras till utvecklingen av deponimiljön simulerad i METS, så verkar den observerade frisättningen av kemikalierna från de reaktivt behandlade Pyrovatexmaterialet och från epoxipolymeren TBBPA förr ha en fysikalisk-kemisk grund oberoende av utvecklingsfaserna i tippmodel-lerna. Flamskyddsmedlen tvättades helt enkelt ut ur de behandlade produkterna. Probanbehandlingen, som motstår förhållandevis många tvättar trots att det används additivt, visade sig läcka långsamt utan en direkt koppling till fasutvecklingen i METS.Kunskaperna om vad som händer med TBBPA:s eterderivat i deponier är i stort sett obefintliga. Flera av dessa derivat används också som flamskyddsmedel. Därför genomfördes en anaerob nedbrytningsstudie av dessa substanser. För att kunna göra denna studie behövdes en omfattande anpassning och utveckling av metodik, vilket resulterade i ett nytt protokoll för analys av dessa ämnen i olika matriser. Studien visade minskning av koncentrationerna av TBBPA, TBBPA-dimetyleter och bisfenol A dimetyl eter, vilket kan tas som ett tecken på att en transformation och/eller nedbrytning skett. Då dessa föreningar kan omvandlas till mer toxiska substanser bör de undersökas vidare.

Este estudo propôs uma avaliação do papel dos três principais parâmetros clássicos da síntese do nitreto de carbono grafítico: temperatura final, tempo de permanência na temperatura final e taxa de aquecimento. Realizou-se a otimização da síntese, via metodologia de superfície de resposta, usando-se como variável-resposta a degradação fotocatalítica de um poluente-modelo (tartrazina). A significância estatística dos fatores foi confirmada, com 95% de confiança. Em seguida, um modelo de segunda ordem foi ajustado às melhores respostas e, no ponto de máxima degradação, as condições foram: 605oC por 183 min, com taxa de aquecimento de 5oC min-1. A taxa de degradação com o fotocatalisador sintetizado foi aproximadamente três vezes maior que a da fotólise. As amostras da região de melhores respostas foram analisadas em uma série de experimentos de caracterização, sendo eles: difratometria de raios X, espectroscopia na região do infravermelho médio, área superficial específica, microscopias de varredura (MEV e MEV-FEG), potencial zeta e espectroscopia de reflectância difusa na região do ultravioleta-visível. O fotocatalisador com maior atividade apresentou menor energia de band gap e maior área superficial especifica do que as relatadas na literatura (2,59 eV e 29,5 m2 g-1, respectivamente). Foram criadas heteroestruturas entre o fotocatalisador sintetizado e o trióxido de tungstênio. A partir de uma série de caracterizações básicas, confirmou-se a formação da heteroestrutura. Com essa heteroestrutura, a taxa de degradação foi aproximadamente cinco vezes maior que a com o nitreto de carbono grafítico. / This study proposed an assessment of the role of the three major classical parameters for synthesizing graphitic carbon nitride: final temperature, residence time at the final temperature and heating rate. The synthesis was optimized, via response surface methodology, using the photocatalytic degradation of a model pollutant (tatrazine) as the response-variable. The statistical significance of the factors was confirmed, within 95% confidence level. Afterwards, a second-order model was adjusted to the better responses and, at the maximum degradation point, the conditions were: 605oC for 183 min, with heating rate of 5oC min-1. The degradation rate with the synthetized photocatalyst was approximately three times greater than the photolytic one. The samples from the better response region were analyzed in a series of characterization experiments: X ray diffractometry, mid-infrared spectrometry, specific surface area, scanning electron microscopy (SEM and FEG-SEM), zeta potential, and ultraviolet-visible diffuse reflectance spectroscopy. The most active photocatalyst showed smaller band gap energy and greater specific surface area than the ones reported in literature (2.59 eV and 29.5 m2 g-1, respectively). Heterostructures were formed between the synthetized photocatalyst and tungsten trioxide. A series of basic characterization techniques confirmed the heterostructure formation. Using this heterostructure, the degradation rate was approximately five times greater than the one with graphitic carbon nitride.

Nesse trabalho obtiveram-se membranas de poli(imida) ramifricada com tamanho de poro ajustável usando melamina como agente de ramificação e indutor da formação de poros. Estas poli(imidas) foram sulfonadas usando-se ácido sulfúrico concentrado eficazmente. Finalmente, obtivemos membranas de carbono molecular por pirólise sob atmosfera inerte das poli(imidas) ramificadas. Estas membranas apresentam canais micrométricos paralelos à superfície e uma estrutura assimétrica constituída de uma camada densa filtrante e uma camada com canais micrométricos paralelos à superfície altamente ordenados. A membrana apresentou boa estabilidade química frente ao ataque por radicais hidroxila gerados via reação de Fenton. / In this work was obtained branched poly(imides) with tuned pore size using melamine as branching and pore induction agent. The poly(imides) with were efficiently sulfonated with concentrated sulfuric acid. Finally, the molecular sieve carbon membranes were obtained by pyrolysis under inert atmosphere of the branched poly(imides). These membranes have an asymmetric structure with a dense filtering layer and a porous layer with highly ordered channels standing parallel to the surface. These membranes display good chemical stability toward hydroxyl radical attack produced by Fenton reaction.

Este estudo propôs uma avaliação do papel dos três principais parâmetros clássicos da síntese do nitreto de carbono grafítico: temperatura final, tempo de permanência na temperatura final e taxa de aquecimento. Realizou-se a otimização da síntese, via metodologia de superfície de resposta, usando-se como variável-resposta a degradação fotocatalítica de um poluente-modelo (tartrazina). A significância estatística dos fatores foi confirmada, com 95% de confiança. Em seguida, um modelo de segunda ordem foi ajustado às melhores respostas e, no ponto de máxima degradação, as condições foram: 605oC por 183 min, com taxa de aquecimento de 5oC min-1. A taxa de degradação com o fotocatalisador sintetizado foi aproximadamente três vezes maior que a da fotólise. As amostras da região de melhores respostas foram analisadas em uma série de experimentos de caracterização, sendo eles: difratometria de raios X, espectroscopia na região do infravermelho médio, área superficial específica, microscopias de varredura (MEV e MEV-FEG), potencial zeta e espectroscopia de reflectância difusa na região do ultravioleta-visível. O fotocatalisador com maior atividade apresentou menor energia de band gap e maior área superficial especifica do que as relatadas na literatura (2,59 eV e 29,5 m2 g-1, respectivamente). Foram criadas heteroestruturas entre o fotocatalisador sintetizado e o trióxido de tungstênio. A partir de uma série de caracterizações básicas, confirmou-se a formação da heteroestrutura. Com essa heteroestrutura, a taxa de degradação foi aproximadamente cinco vezes maior que a com o nitreto de carbono grafítico. / This study proposed an assessment of the role of the three major classical parameters for synthesizing graphitic carbon nitride: final temperature, residence time at the final temperature and heating rate. The synthesis was optimized, via response surface methodology, using the photocatalytic degradation of a model pollutant (tatrazine) as the response-variable. The statistical significance of the factors was confirmed, within 95% confidence level. Afterwards, a second-order model was adjusted to the better responses and, at the maximum degradation point, the conditions were: 605oC for 183 min, with heating rate of 5oC min-1. The degradation rate with the synthetized photocatalyst was approximately three times greater than the photolytic one. The samples from the better response region were analyzed in a series of characterization experiments: X ray diffractometry, mid-infrared spectrometry, specific surface area, scanning electron microscopy (SEM and FEG-SEM), zeta potential, and ultraviolet-visible diffuse reflectance spectroscopy. The most active photocatalyst showed smaller band gap energy and greater specific surface area than the ones reported in literature (2.59 eV and 29.5 m2 g-1, respectively). Heterostructures were formed between the synthetized photocatalyst and tungsten trioxide. A series of basic characterization techniques confirmed the heterostructure formation. Using this heterostructure, the degradation rate was approximately five times greater than the one with graphitic carbon nitride.

The melamine incident 2008 was a global food crisis and drew attentions to other potential food safety risks. Although there are regulations and standards for food safety, but one common problem in food risk management is that it lacks on hazard indicators - indicators in ranking of food risk and control. The three algorithms developed in this article were: 1. A distribution fitting algorithm proposed to estimate population parameters for left-censored melamine data under log-normal assumption. 2. A risk index algorithm proposed to screen out food product categories with higher concentration without considering measurement uncertainty. 3. A misjudgment probability algorithm proposed to calculate the probability that food categories containing melamine more than legal limit but classified satisfactory under consideration of measurement uncertainty. The test results on melamine collected from the website of the Centre for Food Safety of Hong Kong are empirically analyzed by the proposed algorithms. The risk index (RI) and the consumer¡¦s risk (CR) of multiple food categories are discussed and compared in details. Based on risk index (RI) and consumer¡¦s risk (CR), we build a risk assessment process to help assess melamine risk and make sample strategy in surveillance programme. The proposed risk assessment process can be applied to other chemical contaminant problems such as plasticizer (phthalate esters) and ractopamine (paylean), etc.

The use of volatile organic compounds (VOC) in coating materials has adverse effects on both human health and the environment. Due to concern over these problems, coating industry has attempted to decrease the solvent contents of coating materials for the last three decades by developing water dispersed and powder paints. A recently developed method to make solvent free paint is to use highly branched polymers in high solid alkyd resins. Highly branched polymers help to achieve resins with viscosity much lower than its linear counterparts. In this study, a new alkyd based resin was formulated using long oil alkyd and melamine based hyperbranched polymer having 24 functional groups on its structure. The long oil alkyd was synthesized by using an oil mixture (40% linseed + 60% sunflower). Melamine was preferred as core molecule due to its excellent properties such as greater hardness, alkali and solvent resistance with thermal stability. The resin produced has low viscosity because its hyperbranched structure / therefore, it needs no solvent for its application. The chemical characterization of the resins with different compositions was performed using Fourier Transform Infrared Spectroscopy and thermal properties were determined by Differential Scanning Calorimetry. Physical and mechanical tests were conducted to determine hardness, flexibility, impact resistance, abrasion resistance, adhesion power, and gloss property of the samples. The viscosity of the resins decreased from 148 Pa.s to 8.84 Pa.s as the hyperbranched polymer to long oil alkyd ratio was increased from 1:3 to 1:24. On the other hand, the hardness values of the resins decreased from 198 Persoz to 43 Persoz. All resins showed excellent flexibility, formability, adhesion, and gloss.

M. Tech. Chemistry. / Aims to evaluate, compare and modify existing methods and investigate new methods for the qualitative and quantitative determination of melamine. Specific aims were to: evaluate and modify an existing GC-MS15 and HPLC-DAD method16, published by US FDA, for the determination of melamine in pet food and baby milk powder formulae ; develop a novel HPLC fluorescence detection (FLD) method for the determination of melamine in pet food and baby milk powder formulae ; compare these methods to a commercial ELISA detection method for the determination of melamine in pet food samples previously implicated in the poisoning of dogs ; apply NIR spectroscopy with subsequent multivariate analysis to rapidly determine melamine in pet food; and compare the different methods statistically with respect to their analytical performances.