Compósitos de matriz metálica combinam diferentes classes de materiais a fim de obter novas propriedades, superiores às dos materiais originais. A adição de partículas cerâmicas (reforço) em ligas de cobre pode melhorar suas propriedades mecânicas sem gerar grande perda na condutividade elétrica. Este trabalho teve como objetivo processar e estudar a microestrutura e propriedades (condutividade elétrica, dureza e fratura) de compósitos à base de cobre reforçados com alumina e céria. As amostras foram processadas pela técnica de metalurgia do pó: pesagem, mistura (sem bolas por 30min a 46 rpm), compactação (uniaxial à frio com pressão de 1080 Mpa por 10s) e sinterização (800°C por 6h sob vácuo de 10-5 torr). As análises de MO, MEV, EDS e DRX (com refinamento Rietveld) indicaram boa coalescência das partículas, formando superfície continua e com baixa porosidade. A alumina formou regiões aglomeradas da ordem de 20 μm, a céria ficou finamente dispersa nos contornos de grão do cobre com algumas regiões aglomeradas, o cromo formou regiões de cerca de 100 μm e não teve distribuição completamente uniforme ao longo da matriz, a prata formou solução sólida com o cobre e, durante o resfriamento lento, formou precipitados menores do que 5 μm uniformemente dispersos no interior dos grãos de cobre. Os compósitos apresentaram condutividade elétrica entre 15 e 40 %IACS, dureza entre 62 e 88 HV5 e as fractografias apresentaram fratura mista e regiões indicando boa adesão matriz-reforço. Em relação ao cobre puro, foi observado efetivo aumento na dureza (cerca de 2x), porém, em todos os compósitos, o acréscimo da fase cerâmica acarretou na diminuição da condutividade elétrica. Os compósitos de Cu-8%(Al2O3, CeO2) foram os que apresentaram melhor equilíbrio entre essas duas propriedades, com condutividade de 40 e 38 %IACS e dureza de 63 e 69 HV5. / Metal matrix composites combine different classes of materials to obtain new properties, superior to those of the original materials. The addition of ceramic particles (reinforcement) in copper alloys could improve their mechanical properties without generating great loss in electrical conductivity. The aim of this work was to process and study the microstructure and properties (electrical conductivity, hardness and fracture) of copper-based composites reinforced with alumina and ceria. The samples were processed by the powder metallurgy technique: weighing, blending (no balls for 30 min at 46 rpm), compaction (cold uniaxial at 1080 MPa for 10s) and sintering (800°C for 6 h under vacuum of 10-5 torr). Analysis of OM, SEM, EDS and XRD (with Rietveld refinement) indicated good coalescence of the particles, forming continuous surface with low porosity. The alumina formed agglomerated regions with approximately 20 μm, the ceria was finely dispersed in the grain boundary of the copper with some agglomerated regions, the chromium formed regions of about 100 μm and have a non-uniform distribution throughout the matrix, the silver formed solid solution with copper and, during slow cooling, formed precipitates smaller than 5 μm, uniformly dispersed inside the copper grains. The composites presented electrical conductivity between 15 and 40 %IACS, hardness between 62 and 88 HV5 and the fractographs presented mixed fracture and regions indicating good matrix-reinforcement adhesion. In relation to pure copper, it was observed an increase in hardness (about 2x), however, in all the composites, the increase of the ceramic content led to a decrease in the electrical conductivity. The Cu-8%(Al2O3, CeO2) composites showed the best balance between these two properties, with conductivity of 40 and 38 %IACS and hardness of 63 and 69 HV5.

Un composite à matrice métallique et à renfort particulaire de carbure de titane (25vol.%) produit par la société Mecachrome par métallurgie des poudres est l’objet de cette étude. Le process industriel suit trois étapes : broyage à haute énergie des poudres d’acier et de carbure de titane (TiC) ; consolidation de la poudre composite par extrusion ou consolidation isostatique à chaud (HIP) ; traitements thermiques d’austénitisation. Les principales évolutions concernent la taille de particule, la taille de cristallite, le paramètre de maille et la composition chimique du renfort TiC. Dans cette étude, nous nous sommes concentrés uniquement sur l’évolution du renfort (les évolutions de la matrice sont développées dans le travail de M. Mourot). Afin de caractériser les particules de TiC à chaque étape du process, nous avons mis en place une procédure de dissolution chimique sélective de la matrice acier. Le TiC ainsi « extrait » de la matrice a ensuite été caractérisé de façon méthodique par microscopie électronique à balayage (MEB), microscopie électronique en transmission (MET), diffraction des rayons X (DRX) et analyse chimique élémentaire. Ces techniques ont permis de révéler des changements importants indiquant des interactions physico-chimiques durant les étapes d’élaboration du composite. Ces évolutions du renfort et l’étude thermodynamique des systèmes C-Fe-Ti et C-Fe-O-Ti ont permis de proposer les mécanismes réactionnels à prendre en compte lors de l’élaboration du composite acier/TiC / Steel metal matrix composites reinforced with titanium carbide particles (25 vol% ) can be industrially produced by a solid-state process including three main steps: mechanical alloying by high energy milling of steel and titanium carbide powders; consolidation of the powder mixture thus obtained by hot forging, hot extrusion or hot pressing at 1050-1250°C; heat treatment of the resulting composite material. During each of the three steps, the TiC reinforcing particles are submitted to severe mechanical shocks or stresses. Moreover, they can chemically react with impurities of the gas phase during milling or with the steel matrix during consolidation or further heat treatment. As a result, changes are likely to occur in the grain size, crystallite size, morphology and composition of the particles. The aim of this thesis was to point out and characterize these changes. For that purpose, a procedure was developed to selectively dissolve the metal matrix and extract the TiC particles from the starting powder mixture, from the consolidated composite material and from further heat-treated composite samples. The extracted TiC particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), chemical microanalysis (CMA) and X-ray diffraction (XRD). This revealed important changes indicative of the physical and chemical interaction phenomena that successively proceed during processing of the steel/TiC composite

No description available.

No description available.

No description available.

Ni/TiC metal matrix composites have been processed using the laser engineered net shaping (LENS) process. As nickel does not form an equilibrium carbide phase, addition of a strong carbide former in the form of titanium reinforces the nickel matrix resulting in a promising hybrid material for both surface engineering as well as high temperature structural applications. Changing the relative amounts of titanium and carbon in the nickel matrix, relatively low volume fraction of refined homogeneously distributed carbide precipitates, formation of in-situ carbide precipitates and the microstructural changes are investigated. The composites have been characterized in detail using x-ray diffraction, scanning electron microscopy (including energy dispersive spectroscopy (XEDS) mapping and electron backscatter diffraction (EBSD)), Auger electron spectroscopy, and transmission (including high resolution) electron microscopy. Both primary and eutectic titanium carbides, observed in this composite, exhibited the fcc-TiC structure (NaCl-type). Details of the orientation relationship between Ni and TiC have been studied using SEM-EBSD and high resolution TEM. The results of micro-hardness and tribology tests indicate that these composites have a relatively high hardness and a steady-state friction coefficient of ~0.5, both of which are improvements in comparison to LENS deposited pure Ni.

L’influence des renforts nanoparticules de TiB2 (6 wt.%) sur la précipitation interfaciale de la phase (Zn1.5Cu0.5)Mg, la résistance à la traction et la fissuration sous chargement de fatigue (fatigue crack growth-FCG) des composites à matrice de Al-Zn-Mg-Cu ont été étudiées. Des échantillons de composites ont été obtenus par réaction in-situ pendant le moulage suivi d’un FSP (friction stir processing) et une extrusion à chaud. Seuls les échantillons moulés et extrudés ont été utilisés pour étude de FCG à cause de la limitation de la taille après FSP. Des observations au microscope électronique à balayage (SEM), avec la diffraction des électrons rétrodiffusés (SEM/EBSD) et au microscope électronique en transmission à haute résolution (HRSTEM) ont été réalisées pour caractériser la microstructure.Des échantillons présentent une structure des grains équi-axiaux et des nanoparticules de TiB2 sont distribuées de façon homogène dans la matrice. En état de solution solide, l’interface TiB2/Al est de nature semi-cohérente et très propre. En état de vieillissementou ou sur vieillissement, la précipitation interfacaile hétérogène de la phase (Zn1.5Cu0.5)Mg a été observée. La cinétique de la précipitation interfaciale a été discutée. Les interfaces entre Al/(Zn1.5Cu0.5)Mg/TiB2 sont quasi cohérentes et l’interface TiB2/Al a été renforcée grâce à la réduction de l’énergie de l’interface. Ce mécanisme de précipitation interfaciale peut expliquer l’effet de renforcement de l’interface contribuant simultanement l’augmentation de la résistance et de l’élongation des échatillons de composite.La majorité de nanoparticules TiB2 tentent de s’agglomérer le long des joints de grains dans des échantillons sans FSP. La vitesse de croissance de fissure a été augmentée à l’intérieur des grains avec un facteur d’intensité (ΔK) intermédiaire ou important à cause de l’affinement de grains. Cependant, la vitesse de croissance de fissure a été diminuée aux joints de grains avec (ΔK) faible ou intermédiaire à cause de la présence des clusters de TiB2 tandis que cette vitesse augmente avec (ΔK) important à cause de la coalescence des micropores. / The influences of TiB2 reinforcement nanoparticles (6 wt.%) on the interfacial precipitation of (Zn1.5Cu0.5)Mg phase, the associated tensile and fatigue crack growth (FCG) properties of the Al-Zn-Mg-Cu matrix composites have been studied. The composite samples were produced by in-situ reaction during casting followed by friction stir processing (FSP) and hot extrusion, while only casted and extruded samples were used for evaluating FCG due to size limit of the nugget zone after FSP. Scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and high-resolution scanning transmission electron microscopy (HRSTEM) were employed for the microstructure characterization.The as-processed composite samples contain the fine equiaxed-grain structure, where TiB2 nanoparticles are homogenously distributed. At solid-solution state, the TiB2/Al interfaces are featured by the clean and semi-coherent nature. At the peak-aged and overaged states, the interface precipitate determined as (Zn1.5Cu0.5)Mg phase was formed, and the underlying heterogeneous interfacial precipitation kinetics was discussed. The Al/(Zn1.5Cu0.5)Mg/TiB2 multi-interfaces were revealed to be almost coherent, and the TiB2/Al interfaces were thus strengthened due to the greatly reduced coherency strains. This mechanism was proposed as precipitation assisted interface strengthening, which has contributed to the simultaneously enhanced tensile strength and uniform elongation of the as-processed composite.The majority of TiB2 nanoparticles tend to aggregate along grain boundaries (GBs) in the composite samples without FSP. The FCG rate is increased inside grains at intermediate and high stress intensity factor (ΔK) ranges due to the refined grain size. However, the FCG rate at the GBs is decreased at the low and intermediate ΔK ranges by fatigue crack deflection and trapping due to the presence of TiB2 clusters, while it increases at the high ΔK range due to microvoid coalescence.

No description available.

No description available.

No description available.