Doctor of Philosophy / Department of Chemistry / Christopher T. Culbertson / During the last five years, great advancements in microfluidics have been achieved with the development of “sample-in-answer-out” systems. Such systems have begun to realize the true potential of analytical miniaturization since the concept of the “micro-Total Analysis System” was first envisioned. These systems are characterized by the elegant integration of multiple fluid-handling channel architectures that enable serial execution of sample preparation, separation and detection techniques on a single device. While miniaturization and portability are often identified as key advantages for microfluidics, these highly integrated systems are heavily reliant upon large off-chip equipment, i.e. the microchip is often tethered to the laboratory via multiple syringe pumps, vacuum pumps, solenoid valves, gas cylinders and high voltage power supplies. In this dissertation, a procedure for the facile integration of dielectric elastomer (DE) actuators (called IDEAs) onto microfluidic devices is described. Poly(dimethylsiloxane) (PDMS) is commonly used as a microchip substrate because it is cheap and easy to fabricate, mechanically robust and optically transparent. The operation of an IDEA exploits the ability of PDMS to behave as a smart material and deform in the presence of an electric field. In Chapter 2, the fabrication of IDEA units on a standard microchip electrophoresis device is described. IDEA-derived injections were used to evaluate the physical performance of this novel actuator configuration. In Chapter 3, the analytical merits of IDEA-derived injections were evaluated. Sampling bias caused by electokinetic injection techniques has been problematic for conventional microchip electrophoresis systems due to the lack of fluid access. The hydrodynamic injections created by IDEA operation were found to be highly reproducible, efficient, and possess a negligible degree of sampling bias. In Chapter 4, the spatial characteristics of microchannel deformation due to IDEA actuation have been investigated using fluorescence microscopy. It was determined that the DE compresses more along the edge of the channel than in the middle of the channel. This information can be used to design a new generation of more efficient IDEAs.

The main objective of this thesis is to present a simple and robust hands-on technology for the fabrication of a microfluidic chip in a laboratory. The purpose of this new technology is to replace the existing PDMS based microfluidic chip used for optical trapping of diverse single nano particles. It also lists the different fabrication methods attempted and the successful integration of this chip to the optical trap system which is used to study binding at the single molecular level. Microfluidics is a quickly growing field which deals with manipulating the fluids in channels whose dimensions are few tens of micrometers. Its potential has a major impact on fields like chemical analysis and synthesis techniques, biological analysis and separation techniques, and optics and information technology. One of the main application of these microfluidic chips is in optofluidics, which is the emerging field of integrated photonics with fluidics. This provides freedom to both fields and permits the realization of optical and fluidic property. It requires small volumes of fluids and connections and eventually performs better than conventional methods of robotic fluid handling. Here, the microfluidic chip is targeted for optical trapping with double nano-hole aperture to trap a single protein. The double nanoholes integrated with this microfluidic chip show that stable trapping can be achieved below flow rates of few μL/min. This has provided many possibilities of co-trapping of proteins and study their interactions. / Graduate

Les canaux ioniques sont des protéines membranaires permettant le transport ionique au travers des membranes biologiques. Du fait de leur omniprésence dans l'organisme, ils représentent une classe de cibles thérapeutiques encore actuellement peu exploitée du fait de limitations expérimentales dans leur étude. La mesure électrique de l'activité des canaux ioniques au sein de bicouches biomimétiques reconstituées in vitro permettrait de répondre à ces limitations. Cependant, il n'existe actuellement pas de système satisfaisant au cahier des charges complet pour de telles analyses : stabilité et pureté de la bicouche, faible niveau de bruit, insertion rapide des canaux ioniques, intégration dans un dispositif fluidique, possibilité de mener une caractérisation optique simultanée. L'objectif de ces travaux de thèse était d'évaluer dans quelle mesure l'utilisation d'un substrat SOI (Silicon On Insulator) comprenant des nanopores pourrait permettre de répondre à tous ces critères. Des nanopores de diamètre compris entre 10 nm et 160 nm ont été réalisés à partir d'un substrat SOI. Une cellule fluidique transparente est utilisée pour l'adressage fluidique. Cette cellule permet d'autre part la double caractérisation électrique et optique. Les propriétés électriques en milieu liquide du dispositif ont été étudiées et permettent de dégager des perspectives d'amélioration. La double caractérisation électrique et optique est démontrée au moyen d'expériences de capture de nanoparticules fluorescentes sur les nanopores. Enfin, des premiers résultats prometteurs d'obtention d'une bicouche lipidique suspendue sont présentés. / Ion channels are membrane proteins responsible for ion transport across biological membranes. Due to their ubiquity, they are promising drug targets but are not yet fully exploited as such due to experimental restrictions in their study. Electrical measurement of ion channels activity within in vitro artificial lipid bilayers would enable to overcome these restrictions. However, there is not yet a system satisfying all the requirements for ion channels studies: stability and purity of the lipid bilayer, low noise level, fast insertion of ion channels, fluidic integration, ability to perform simultaneous optical characterization. The aim of this phD was to assess in which extent the use of an SOI (Silicon On Insulator) substrate bearing nanopores could satisfy all these requirements. 10 nm to 160 nm diameter nanopores were fabricated in an SOI substrate and characterized. A transparent fluidic cell was used for fluidic addressing. This transparent cell allows combined electrical and optical characterization. Electrical properties of the device in aqueous environment were studied, allowing to bring out improvement prospects. The combined electrical and optical characterization was demonstrated with fluorescent nanoparticle trapping experiments on the nanopores. Finally, promising results about the formation of a free-standing lipid bilayer are presented.