The aim of this thesis is to study the issue of eniveromental scanning electron microscopy and pumping gas to create vacuum in the newly designed scintillation detector. Further, creating a model of recently proposed scintillation detector and simulating and analyzing pumping gas in differentially pumped chamber of detector. The theoretical part deals with electron microscopy, electron sources, electron optics and secondary electrons detectors. It is also presented which signals are generated by the electron beam on the surface of a solid. Further fluid flow issues and equations describing the flow in the solved chamber are dismantled. Furthermore, the impact of gaseous environment on the trajectory of primary electrons, because there are collisions of primary beam with atoms and molecules of gas. The following section discusses creating, quality and importance of the network in mathematical modelling. A method of a final volume used to calculate the differential equations describing the flow of gas at the premises of the detector is described . The practical part consists in creating a model of scintillation detector and analyzing the gas flow in drawing a vacuum in the newly designed scintillation detector. At the end the simulation results of gas flow are compared for different variants of apertures and various pressures on the neck of a scintillation detector designed for optimum performance of the detector. The outcome of this thesis is model of newly designed scintillation detector with optimized shapes of apertures according to functional requirements.

This thesis is interested in new materials for lithium – ion batteries. Two different samples were investigated, one intercalation and one conversion cathode material. The theoretical part is focused to the structure of cells, their advantages and disadvantages compared to other secondary batteries. Also other materials used in batteries are described. The practical part describes the preparation of cathode materials for subsequent testing by scanning elektron microscopy and thermogravimetric analysis. In conclusions two different materials were evaluated and compared with each other.

The present work deals with electron microscopy, electron microscopy primarily environmental. The main task of the work will draft the optimal shape of the differentially pumped chamber, dividing the pressure difference between tube and chamber with sample for a new concept of an electron microscope. By ANSYS Fluent will be analyzed pumping gas. Subsequently, according to the results obtained will be a modified form of the differential Chamber and to achieve the lowest gas pressure on the track of the electron beam.

This master´s thesis discusses the analysis of the shape of the intake ports of differentially pumped chamber for the current concept. The first part is an introduction to the microscopy issue, then it is focused on ESEM microscopes and it also includes a describtion of the Flow dynamics and a mathematical describtion. In the following chapters the software Solid Works, where the model of differentially pumped chamber is created, and the software Ansys Fluent, which is used for analysis, are described. The second part concerns the proposed concepts and the results of their simulations. At the end of the work the results are analyzed and evaluated.

Content is focused on fluorescence lifetime imaging techniques. Fluorescence lifetime is computed from data acquired with using of Leica TCS SP8X confocal microscope sequential scanning. Algorithms and software for the computation, imaging and analysis of fluorescence lifetime is presented. Software is allowing both 2D and 3D imaging of fluorescence lifetime. Techniques are used for fluorescence lifetime imaging of mesenchymal cells and fibroblasts tainted with SPIO-Rhodamin complex.

This thesis focuses on advanced methods of detecting contours of the cardiac cells and measuring their contraction. The theoretical section describes the types of confocal microscopes, which are used for capturing biological samples. The following chapter is devoted to the methods of cardiac cells segmentation, where we are introduced to the generally applied approaches. The most widely spread methods of segmentation are active contours and mathematical morphology, which are the crucial topics of this thesis. Thanks to the those methods we are able in the visual data to accurately detect required elements and measure their surface chnage in time. Acquired theoretical knowledge leads us to the practical realization of the methods in MATLAB.

During operational conditions of internal combustion turbines of turbojet engines, the impeller blades are stressed by load cycles which vary in time, temperature and stress. In the course of operation, the blades are exposed to a considerable number of degradation effects, particularly high-temperature corrosion, fatigue processes and creep. The presented work is aimed at the study of the structure cast nickel-base superalloy INCONEL 713 LC, creep tests exposured. The structural changes (degradation) was clasifikation by the help of image analyses. Operational conditions of heat parts, used in gas turbines and turbo-compressors, were simulated by creep tests of Inconel 713 LC nickel superalloy during a constant load of temperatures ranging from 750 up to 950C. Changes in the structure dependent upon time, temperature and stress applied were analysed by means of light and electron microscopy methods and image analyses after the fracture of test bars.

This master's thesis deals with study of the injected charge contrast mechanism of doped semiconductors by using the ultra – high vacuum scanning low electron energy microscope (UHV SLEEM). The aims of this work were to explain the injected charge contrast mechanism, to ability of this contrast mechanism to map the dopant density quantitatively and to identify the influencing factors.

Diploma thesis deals with ageing process of thin films of Co and Cu on Si substrate, prepared by the IBAD method. The process of film ageing, which depends on time of exposition to the atmosphere at room conditions, was investigated with spectroscopic ellipsometry (VIS+UV) and atomic force microscopy. In case of thin Co films, approximately four days long incubation period was observed. During this time period, a change in the optical parameters of the film occurs without a measurable change of the film topography. Using non-contact atomic force microscopy, a growth of the transitional film in the island growth regime was observed. During the ageing of thin Cu films, two stages of growth of the transitional layer were observed - nucleation stage and growth stage. Both of these time periods of the transitional layer growth show direct logarithmic dependence. Using non-contact atomic force microscopy, the growth of the transitional film was observed. Using atomic force microscopy in non-contact regime, time dependent measurement was done and the process of forming of one monolayer of the transitional layer was documented. Within the diploma thesis, a series of experiments on ultra high vacuum system were performed in order to investigate phase transformation of thin Fe films (22 monolayers) on Cu(100) stabilized by CO absorption. The transformation from fcc phase to bcc phase was induced by Ar+ ion beam bombardment with the ion energy in the range (0.5-4) keV. The process of phase transformation was observed by surface magneto-optic Kerr effect, Auger electron spectroscopy and low energy electron diffraction.

This master’s thesis develops a novel method of digital holography, from recent studies known as Fresnel Incoherent Correlation Holography (FINCH). The method enables the reconstruction of the correlation records of three-dimensional objects, captured under quasi-monochromatic, incoherent illumination. The experimental system is based on an action of a Spatial Light Modulator, driven by computer generated holograms to create mutually correlated beams. Both optical and digital parts of the experiment can be carried out using procedures of classical holography, diffractive optics and digital holography. As an important theoretical result of the master’s thesis, a new computational model was proposed, which allows to describe the experiment completely with respect to its two basic phases. The proposed model allows to understood the method intuitively and can be used additionally for analysis and interpretation of the imaging parameters and the system optimalization. The theoretical part of the master’s thesis also presents a detailed description of the correlation imaging based on an appropriate reconstruction process. Computational models were developed for both monochromatic and quasi-monochromatic illumination. In experimental part, all theoretical results were verified. The imaging parameters were examined using standard resolution target tests and appropriate biological samples. As an original experimental result, spiral modification of the system resulting in a vortex imaging was proposed and realized. Here, a selective edge enhancement of three-dimensional objects is possible, resulting in a significant extension of possible applications of the method.