Spelling suggestions: "subject:"modal analysis."" "subject:"nodal analysis.""
201 |
Modeling the Behavior of Additively Manufactured Components with Integrated Particle Dampers: A Discrete Element Method Simulation AnalysisPostell, Matthew 23 August 2022 (has links)
No description available.
|
202 |
Benchmark Studies For Structural Health Monitoring Using Analytical And Experimental ModelsBurkett, Jason Lee 01 January 2005 (has links)
The latest bridge inventory report for the United States indicates that 25% of the highway bridges are structurally deficient or functionally obsolete. With such a large number of bridges in this condition, safety and serviceability concerns become increasingly relevant along with the associated increase in user costs and delays. Biennial inspections have proven subjective and need to be coupled with standardized non-destructive testing methods to accurately assess a bridge's condition for decision making purposes. Structural health monitoring is typically used to track and evaluate performance, symptoms of operational incidents, anomalies due to deterioration and damage during regular operation as well as after an extreme event. Dynamic testing and analysis are concepts widely used for health monitoring of existing structures. Successful health monitoring applications on real structures can be achieved by integrating experimental, analytical and information technologies on real life, operating structures. Real-life investigations must be backed up by laboratory benchmark studies. In addition, laboratory benchmark studies are critical for validating theory, concepts, and new technologies as well as creating a collaborative environment between different researchers. To implement structural health monitoring methods and technologies, a physical bridge model was developed in the UCF structures laboratory as part of this thesis research. In this study, the development and testing of the bridge model are discussed after a literature review of physical models. Different aspects of model development, with respect to the physical bridge model are outlined in terms of design considerations, instrumentation, finite element modeling, and simulating damage scenarios. Examples of promising damage detection methods were evaluated for common damage scenarios simulated on the numerical and physical models. These promising damage indices were applied and directly compared for the same experimental and numerical tests. To assess the simulated damage, indices such as modal flexibility and curvature were applied using mechanics and structural dynamics theory. Damage indices based on modal flexibility were observed to be promising as one of the primary indicators of damage that can be monitored over the service life of a structure. Finally, this thesis study will serve an international effort that has been initiated to explore bridge health monitoring methodologies under the auspices of International Association for Bridge Maintenance and Safety (IABMAS). The data generated in this thesis research will be made available to researchers as well as practitioners in the broad field of structural health monitoring through several national and international societies, associations and committees such as American Society of Civil Engineers (ASCE) Dynamics Committee, and the newly formed ASCE Structural Health Monitoring and Control Committee.
|
203 |
Characterization of Dynamic Structures Using Parametric and Non-parametric System Identification MethodsAl Rumaithi, Ayad 01 January 2014 (has links)
The effects of soil-foundation-structure (SFS) interaction and extreme loading on structural behaviors are important issues in structural dynamics. System identification is an important technique to characterize linear and nonlinear dynamic structures. The identification methods are usually classified into the parametric and non-parametric approaches based on how to model dynamic systems. The objective of this study is to characterize the dynamic behaviors of two realistic civil engineering structures in SFS configuration and subjected to impact loading by comparing different parametric and non-parametric identification results. First, SFS building models were studied to investigate the effects of the foundation types on the structural behaviors under seismic excitation. Three foundation types were tested including the fixed, pile and box foundations on a hydraulic shake table, and the dynamic responses of the SFS systems were measured with the instrumented sensing devices. Parametric modal analysis methods, including NExT-ERA, DSSI, and SSI, were studied as linear identification methods whose governing equations were modeled based on linear equations of motion. NExT-ERA, DSSI, and SSI were used to analyze earthquake-induced damage effects on the global behavior of the superstructures for different foundation types. MRFM was also studied to characterize the nonlinear behavior of the superstructure during the seismic events. MRFM is a nonlinear non-parametric identification method which has advantages to characterized local nonlinear behaviors using the interstory stiffness and damping phase diagrams. The major findings from the SFS study are: *The investigated modal analysis methods identified the linearized version of the model behavior. The change of global structural behavior induced by the seismic damage could be quantified through the modal parameter identification. The foundation types also affected the identification results due to different SFS interactions. The identification accuracy was reduced as the nonlinear effects due to damage increased. *MRFM could characterize the nonlinear behavior of the interstory restoring forces. The localized damage could be quantified by measuring dissipated energy of each floor. The most severe damage in the superstructure was observed with the fixed foundation. Second, the responses of a full-scale suspension bridge in a ship-bridge collision accident were analyzed to characterize the dynamic properties of the bridge. Three parametric and non-parametric identification methods, NExT-ERA, PCA and ICA were used to process the bridge response data to evaluate the performance of mode decomposition of these methods for traffic, no-traffic, and collision loading conditions. The PCA and ICA identification results were compared with those of NExT-ERA method for different excitation, response types, system damping and sensor spatial resolution. The major findings from the ship-bridge collision study include: *PCA was able to characterize the mode shapes and modal coordinates for velocity and displacement responses. The results using the acceleration were less accurate. The inter-channel correlation and sensor spatial resolution had significant effects on the mode decomposition accuracy. *ICA showed the lowest performance in this mode decomposition study. It was observed that the excitation type and system characteristics significantly affected the ICA accuracy.
|
204 |
The Effects Of Assumption On Subspace Identification Using Simulation And Experiment DataKim, Yoonhwak 01 January 2013 (has links)
In the modern dynamic engineering field, experimental dynamics is an important area of study. This area includes structural dynamics, structural control, and structural health monitoring. In experimental dynamics, methods to obtain measured data have seen a great influx of research efforts to develop an accurate and reliable experimental analysis result. A technical challenge is the procurement of informative data that exhibits the desired system information. In many cases, the number of sensors is limited by cost and difficulty of data archive. Furthermore, some informative data has technical difficulty when measuring input force and, even if obtaining the desired data were possible, it could include a lot of noise in the measuring data. As a result, researchers have developed many analytical tools with limited informative data. Subspace identification method is used one of tools in these achievements. Subspace identification method includes three different approaches: Deterministic Subspace Identification (DSI), Stochastic Subspace Identification (SSI), and Deterministic-Stochastic Subspace Identification (DSSI). The subspace identification method is widely used for fast computational speed and its accuracy. Based on the given information, such as output only, input/output, and input/output with noises, DSI, SSI, and DSSI are differently applied under specific assumptions, which could affect the analytical results. The objective of this study is to observe the effect of assumptions on subspace identification with various data conditions. Firstly, an analytical simulation study is performed using a sixdegree-of-freedom mass-damper-spring system which is created using MATLAB. Various conditions of excitation insert to the simulation test model, and its excitation and response are iv analyzed using the subspace identification method. For stochastic problems, artificial noise is contained to the excitation and followed the same steps. Through this simulation test, the effects of assumption on subspace identification are quantified. Once the effects of the assumptions are studied using the simulation model, the subspace identification method is applied to dynamic response data collected from large-scale 12-story buildings with different foundation types that are tested at Tongji University, Shanghai, China. Noise effects are verified using three different excitation types. Furthermore, using the DSSI, which has the most accurate result, the effect of different foundations on the superstructure are analyzed.
|
205 |
Application and Evaluation of Full-Field Surrogate Models in Engineering Design Space ExplorationThelin, Christopher Murray 01 July 2019 (has links)
When designing an engineering part, better decisions are made by exploring the entire space of design variations. This design space exploration (DSE) may be accomplished manually or via optimization. In engineering, evaluating a design during DSE often consists of running expensive simulations, such as finite element analysis (FEA) in order to understand the structural response to design changes. The computational cost of these simulations can make thorough DSE infeasible, and only a relatively small subset of the designs are explored. Surrogate models have been used to make cheap predictions of certain simulation results. Commonly, these models only predict single values (SV) that are meant to represent an entire part's response, such as a maximum stress or average displacement. However, these single values cannot return a complete prediction of the detailed nodal results of these simulations. Recently, surrogate models have been developed that can predict the full field (FF) of nodal responses. These FF surrogate models have the potential to make thorough and detailed DSE much more feasible and introduce further design benefits. However, these FF surrogate models have not yet been applied to real engineering activities or been demonstrated in DSE contexts, nor have they been directly compared with SV surrogate models in terms of accuracy and benefits.This thesis seeks to build confidence in FF surrogate models for engineering work by applying FF surrogate models to real DSE and engineering activities and exploring their comparative benefits with SV surrogate models. A user experiment which explores the effects of FF surrogate models in simple DSE activities helps to validate previous claims that FF surrogate models can enable interactive DSE. FF surrogate models are used to create Goodman diagrams for fatigue analysis, and found to be more accurate than SV surrogate models in predicting fatigue risk. Mode shapes are predicted and the accuracy of mode comparison predictions are found to require a larger amount of training samples when the data is highly nonlinear than do SV surrogate models. Finally, FF surrogate models enable spatially-defined objectives and constraints in optimization routines that efficiently search a design space and improve designs.The studies in this work present many unique FF-enabled design benefits for real engineering work. These include predicting a complete (rather than a summary) response, enabling interactive DSE of complex simulations, new three-dimensional visualizations of analysis results, and increased accuracy.
|
206 |
Improving observability in experimental analysis of rotating systemsDeshpande, Shrirang January 2014 (has links)
No description available.
|
207 |
Design, Analysis and Optimization of Rear Sub-frame using Finite Element Modeling and Modal AnalysisKesireddy, Gaurav January 2017 (has links)
No description available.
|
208 |
Structural Condition Assessment of Steel Stringer Highway BridgesWang, Xiaoyi 13 July 2005 (has links)
No description available.
|
209 |
STRUCTURAL ANALYSIS OF REINFORCED SHELL WING MODEL FOR JOINED-WING CONFIGURATIONNARAYANAN, VIJAY 13 July 2005 (has links)
No description available.
|
210 |
STRUCTURAL ANALYSIS OF AN EQUIVALENT BOX-WING REPRESENTATION OF SENSORCRAFT JOINED-WING CONFIGURATION FOR HIGH-ALTITUDE, LONG-ENDURANCE (HALE) AIRCRAFTMARISARLA, SOUJANYA 13 July 2005 (has links)
No description available.
|
Page generated in 0.0589 seconds