We use a system model expressed in a subset of the Unified Modeling Language to perform fault isolation in large object oriented control systems. Due to the severity of the failures considered and the safety critical nature of the system we cannot perform fault isolation online. Thus, we perform post mortem fault isolation which has implications in terms of the information available; the temporal order in the error log can not be trusted. In our previous work we have used a structural model for fault isolation. In this thesis we provide a formal framework and a prototype implementation of an approach taking benefit of a behavioral model. This gives opportunities to perform more sophisticated reasoning at the cost of a more detailed system model. We use a model-checker to reason about causal dependencies among the events of the modeled system. The model-checker performs reasoning about temporal dependencies among the events in the system model and the scenario at hand, allowing for conclusions about the causal relation between the events of the scenario. This knowledge can then be transferred to the corresponding fault in the system, allowing us to pinpoint the cause of a system failure among a set of potential causes. / <p>Report code: LiU-Tek-Lic-2000:59.</p>

System-on-Chip (SoC) and other complex distributed hardware/software systems contain heterogeneous components whose behavior are best captured by different models of computations (MoCs). As a result, any system design framework for such systems requires the capability to express heterogeneous MoCs. Although a number of system level design languages (SLDL)s and frameworks have proliferated over the last few years, most of them are lacking in multiple ways. Some of the SLDLs and system design frameworks we have worked with are SpecC, Ptolemy II, SystemC-H, etc. From our analysis of these, we identify their following shortcomings: First, their dependence on specific programming language artifacts (Java or C/C++) make them less amenable to formal analysis. Second, the refinement strategies proposed in the design flows based on these languages lack formal semantics underpinnings making it difficult to prove that refinements preserve correctness, and third, none of the available SLDLs are easily customizable by users. In our work, we address these problems as follows: To alleviate the first problem, we follow Axel Jantsch's paradigm of function-based semantic definitions of MoCs and formulate a functional programming framework called SML-Sys. We illustrate through a number of examples how to model heterogenous computing systems using SML-Sys. Our framework provides for formal reasoning due to its formal semantic underpinning inherited from SML's precise denotational semantics. To handle the second problem and apply refinement strategies at a higher-level, we propose a refinement methodology and provide a semantics preserving transformation library within our framework. To address the third shortcoming, we have developed EWD, which allows users to customize MoC-specific visual modeling syntax defined as a metamodel. EWD is developed using a metamodeling framework GME (Generic Modeling Environment). It allows for automatic design-time syntactic and semantic checks on the models for conformance to their metamodel. Modeling in EWD facilitates saving the model in an XML-based interoperability language (IML) we defined for this purpose. The IML format is in turn automatically translated into Standard ML, or Haskell models. These may then be executed and analyzed either by our existing model analysis tools SMLSys, or the ForSyDe environment. We also generate SMV-based template from the XML representation to obtain verification models. / Master of Science

A common problem experienced by the software engineering community traditionally has been that of understanding legacy code. A decade ago, legacy code was used to refer to programs written in COBOL, typically for large mainframe systems. However, current software developers predominantly use Object Oriented languages like C++ and Java. The belief prevalent among software developers and object philosophers that comprehending object-oriented software will be relatively easier has turned out to be a myth. Tomorrow's legacy code is being written today, since object oriented programs are even more complex and difficult to comprehend, unless rigorously documented. Reverse Engineering is a methodology that greatly reduces the time, effort and complexity involved in solving the program comprehension problem. This thesis deals with Reverse Engineering complex object oriented software and the experiences with a sample case study. Extensive survey of literature and contemporary research on reverse engineering and program comprehension was undertaken as part of this thesis work. An Energy Information System (EIS) application created by a leading energy service provider and one that is being used extensively in the real world was chosen as a case study. Reverse engineering this industry strength Java application necessitated the definition of a formal process. An intuitive Reverse Engineering Process (REP) was defined and used for the reverse engineering effort. The learning experiences gained from this case study are discussed in this thesis. / Master of Science

Submitted by Fabio Sobreira Campos da Costa (fabio.sobreira@ufpe.br) on 2016-10-31T12:04:21Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) DissertacaoHerbertt_CIN_UFPE.pdf: 3162767 bytes, checksum: 3208dfce28e7404730479384c2ba99a0 (MD5) / Made available in DSpace on 2016-10-31T12:04:21Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) DissertacaoHerbertt_CIN_UFPE.pdf: 3162767 bytes, checksum: 3208dfce28e7404730479384c2ba99a0 (MD5) Previous issue date: 2016-03-04 / Cada vez mais se evidencia uma maior escassez de recursos e uma disputa por espaços físicos, em decorrência da crescente e demasiada concentração populacional nas grandes cidades. Nesse âmbito, surge a necessidade de soluções que vão de encontro à iniciativa de “Cidades Inteligentes" (Smart Cities). Essas soluções buscam centralizar o monitoramento e controle, para auxiliar no apoio à tomada de decisão. No entanto, essas fontes de TICs formam estruturas complexas e geram um grande volume de dados, que apresentam enormes desafios e oportunidades. Uma das principais ferramentas tecnológicas utilizadas nesse contexto é o Complex Event Processing (CEP), o qual pode ser considerado uma boa solução, para lidar com o aumento da disponibilidade de grandes volumes de dados, em tempo real. CEPs realizam captação de eventos de maneira simplificada, utilizando linguagem de expressão, para definir e executar regras de processamento. No entanto, apesar da eficiência comprovada dessas ferramentas, o fato das regras serem expressas em baixo nível, torna o seu uso exclusivo para usuários especialistas, dificultando a criação de soluções. Com intuito de diminuir a complexidade das ferramentas de CEP, em algumas soluções, tem-se utilizado uma abordagem de modelos Model-Driven Development (MDD), a fim de se produzir uma camada de abstração, que possibilite criar regras, sem que necessariamente seja um usuário especialista em linguagem de CEP. No entanto, muitas dessas soluções acabam tornando-se mais complexas no seu manuseio do que o uso convencional da linguagem de baixo nível. Este trabalho tem por objetivo a construção de uma Graphic User Interface (GUI) para criação de regras de CEP, utilizando MDD, a fim de tornar o desenvolvimento mais intuitivo, através de um modelo adaptado as necessidades do usuário não especialista. / Nowadays is Increasingly evident a greater resources scarcity and competition for physical space, in result of growing up and large population concentration into large cities. In this context, comes up the necessity of solutions that are in compliance with initiative of smart cities. Those solutions seek concentrate monitoring and control, for help to make decisions. Although, this sources of information technology and communications (ITCs) forming complex structures and generates a huge quantity of data that represents biggest challenges and opportunities. One of the main technological tools used in this context is the Complex Event Processing (CEP), which may be considered a good solution to deal with increase of the availability and large volume of data, in real time. The CEPs realizes captation of events in a simple way, using expressive languages, to define and execute processing rules. Although the efficient use of this tools, the fact of the rules being expressed in low level, becomes your use exclusive for specialists, difficulting the creation of solutions. With the aim of reduce the complexity of the CEPs tools, solutions has used an approach of models Model-Driven Development (MDD), in order to produce an abstraction layer, that allows to create rules, without necessarily being a specialist in CEP languages. however, many this tools become more complex than the conventional low level language approach. This work aims to build a Graphic User Interface (GUI) for the creation of CEP rules, using MDD, in order to a more intuitive development, across of the adapted model how necessities of the non specialist users.

ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California / The integrated Network Enhanced Telemetry (iNET) and Test and Training Enabling Architecture (TENA) projects are working to understand how TENA will perform in a Telemetry Network System. This paper discusses a demonstration prototype that is being used to investigate the use of TENA across a constrained test environment simulating iNET capabilities. Some of the key elements being evaluated are throughput, latency, memory utilization, memory footprint, and bandwidth. The results of these evaluations will be presented. Additionally, the paper briefly discusses modeling and metadata requirements for TENA and iNET.

本研究旨在協助產險公司建立動態財務分析系統. / Despite the promise of DFA, many insurers have grown increasingly frustrated with it. Evolution of DFA models leads to a vicious cycle of implementation, compilation and modification that disrupts the creative evolutionary modeling activity. To overcome this obstacle, MLDFA discussed in this paper provides an improved approach that would meet the desired requirements. MLDFA architecture plays a central role in its successful development. Model Transformation Systems makes a transformation from the conceptual model into programmed model by combining conceptions of Object Oriented Programming (OOP) and Code Generation. With the object-oriented style user interface, MLDFA provides the user with means to conveniently structure the model in a natural way. We believe that the proposed approach is suitable and feasible for the formulation and refinement of DFA models. Although MLDFA is in an early stage of implementation, it has the potential to bring DFA to a wider audience because it could help insurance companies in total cost reduction of the life cycle DFA system.

This thesis focuses on modeling of business processes which are very sensitive on correct capturing of process details characterized as process events and states. At the beginning of the analysis are the process events and states classified into three types: activity related, object related and time related. Each type is analyzed in detail and there are formulated states and their transitions that form a lifecycle of each individual type of the process state. There are discussed contemporary process modeling languages starting from the very popular to relatively less known, all representing slightly different approach towards process modeling. The analysis of process events and states shows that the contemporary process modeling languages cover the defined lifecycles only partially. There are picked three popular process modeling languages and put through a test case, which is based on Czech regulation of a building process. This test case allows us to review their capabilities to capture the process events including the ways how they get along with their only partial support. Upon analysis of process events and states and the unsatisfying results of the con-temporary process modeling languages in the test case, there is introduced a new process modeling language which, as demonstrated, is capable of capturing many of the process events and states in the test case in much simpler and precise way that the three reviewed process modeling languages were able to.

Unmanned aerial systems (UASs) often require multiple human operators fulfilling diverse roles for safe and correct operation. Reliably designing the human interaction, autonomy, and decision making aspects of these systems requires the use of modeling. We propose a conceptual model that models human machine interaction systems as a group of actors connected by a network of communication channels. We present a simulation framework implemented in Java, with an optional XML model parser that can be analyzed using the Java Pathfinder (JPF) model checker. We propose two human workload metrics based on a taxonomy extracted from the relevant literature. Using the simulator to produce a workload profile over time for each human actor, we conducted a case study by modeling a UAS integrated into the National Airspace System. Additionally we adapted an existing cognitive workload metric to act as a baseline. The results of this case study were consistent with known workload events and the results of our baseline metric.

Although originally designed as an extension for the Unifi ed Modeling Language (UML), today, the Object Constraint Language (OCL) has been broadly adopted in the context of both UML and other modeling and domain-specifi c languages. However, appropriate tooling, supporting modelers and software developers on using OCL is still scarce and lacks important features such as debugging support. As OCL constraints are likely to become rather complex for real world examples, it is hard to comprehend the in uence of single OCL expressions and subexpressions on the result of a completely evaluated OCL constraint in the context of speci fic constrained objects. Therefore, debugging is of topmost importance for both constraint comprehension and maintenance. Thus, the major task of this work is to develop a graphical debugger integrated into Dresden OCL and the Eclipse Integrated Development Environment (IDE) to fill this gap.

The cadastre contains parcel related data which must be up-to-date. The cadastral data in any country constitute a very big dataset. Therefore parcel related data should be carefully managed. Today, using a database is an effective way of data management. The relational database management system can be a good one for parcel related data. However when the information system concept is considered, just relational database management system is not enough. Some tools are needed in order to manipulate the data in the relational database management system. Object oriented analysis and design is a good choice to develop these tools. In this study, a parcel-based information system is developed and it is implemented for &Ccedil / ankaya Municipality. During the development relational database management system is used for attribute data management, and object-oriented analysis and design is used for development of application to manipulate the data in the relational database management system. The cadastral data are separated into two parts and each part is handled separately. The first part is the geographic or spatial data. These data are handled by the help of the MapInfo Professional Version 6.5. The other part is the attributes of these spatial data. For this part, relational database is designed and implemented on Microsoft SQL Server Version 2000. During the development of the relational database, conceptual database design is performed by enhanced entity-relationship (EER) model. Then in the logical design, the conceptual model is mapped into the relational model. After data storage area is created, the application is developed on that data by using principles of object-oriented design and analysis and unified modeling language. By the help of the software developed, the data management can be carried out easily. By this study, a solution is proposed for the cadastral data management problem of the municipalities, and this study is one of the first studies developed for parcel related data using object-oriented approach for municipalities.