The goal of this thesis is to improve the predictive capability of Finite element (FE) by gathering data from experimental test and implement the characteristics into the material model that is used. FE is a commonly used method to predict the mechanical behavior of materials and components during applied forces. Therefore, it’s an important part of product development since it gives an opportunity to lower the costs as well as saving resources since it reduces the number of experimental tests. The method for this thesis was to first simulate tensile tests in Abaqus and then to analyze its results. Once all the simulations were done, we replicated the simulation with experimental tests. This was done with DIC (Digital Image Correlation) to help gather data. Since the goal of this thesis is to see how the predictive capability of the FEM-simulation can be improved the results are compared and discussed to see what from the FEM-simulation matches the DIC results and what does not. This will help understand what in the material model that needs to be changed to better match the testing. DIC is a non-contact method that is used to measure deformations and strain locally over an area which results in a more detailed view of the mechanical behavior of the material. The idea of using DIC during this thesis is to sample enough valuable data and apply it to the original material model of the FE-simulations to increase the predictive capability. After the results from the experimental tests were analyzed it was clear that there were both resemblances and differences in the results, for example the Young’s modulus in the FEM-calculations was higher than it was for the experimental tests, Yield strength was lower in the FEM-calculations compared to the experimental tests, maximum load at fracture was lower in the FEM-calculations compared to the experimental tests and elongation was lower in the FEM-calculations compared to the experimental tests. The FEM-calculations were based of the assumptions that the material was homogenous but that wasn’t the case for the experimental tests. Due to the strain varying over the tests the material model could be improved by adding a statistical variation, to all the elements to give them varying mechanical properties simulate how the strain vary more correctly over the specimen.

Models are important tools for understanding the hydrological processes that govern water transport in the landscape and for prediction at times and places where no observations are available. The degree of trust placed on models, however, should not exceed the quality of the data they are fed with. The overall aim of this thesis was to tune the modeling process to account for the uncertainty in the data, by identifying robust parameter values using methods from computational geometry. The methods were developed and tested on data from the Choluteca River basin in Honduras. Quality control of precipitation and discharge data resulted in a rejection of 22% percent of daily raingage data and the complete removal of one out of the seven discharge stations analyzed. The raingage network was not found sufficient to capture the spatial and temporal variability of precipitation in the Choluteca River basin. The temporal variability of discharge was evaluated through a Monte Carlo assessment of the rating-equation parameter values over a moving time window of stage-discharge measurements. Al hydrometric stations showed considerable temporal variability in the stage-discharge relationship, which was largest for low flows, albeit with no common trend. The problem with limited data quality was addressed by identifying robust model parameter values within the set of well-performing (behavioral) parameter-value vectors with computational-geometry methods. The hypothesis that geometrically deep parameter-value vectors within the behavioral set were hydrologically robust was tested, and verified, using two depth functions. Deep parameter-value vectors tended to perform better than shallow ones, were less sensitive to small changes in their values, and were better suited to temporal transfer. Depth functions rank multidimensional data. Methods to visualize the multivariate distribution of behavioral parameters based on the ranked values were developed. It was shown that, by projecting along a common dimension, the multivariate distribution of behavioral parameters for models of varying complexity could be compared using the proposed visualization tools. This has a potential to aid in the selection of an adequate model structure considering the uncertainty in the data. These methods allowed to quantify observational uncertainties. Geometric methods have only recently begun to be used in hydrology. It was shown that they can be used to identify robust parameter values, and some of their potential uses were highlighted. / Modeller är viktiga verktyg för att förstå de hydrologiska processer som bestämmer vattnets transport i landskapet och för prognoser för tider och platser där det saknas mätdata. Graden av tillit till modeller bör emellertid inte överstiga kvaliteten på de data som de matas med. Det övergripande syftet med denna avhandling var att anpassa modelleringsprocessen så att den tar hänsyn till osäkerheten i data och identifierar robusta parametervärden med hjälp av metoder från beräkningsgeometrin. Metoderna var utvecklade och testades på data från Cholutecaflodens avrinningsområde i Honduras. Kvalitetskontrollen i nederbörds- och vattenföringsdata resulterade i att 22 % av de dagliga nederbördsobservationerna måste kasseras liksom alla data från en av sju analyserade vattenföringsstationer. Observationsnätet för nederbörd befanns otillräckligt för att fånga upp den rumsliga och tidsmässiga variabiliteten i den övre delen av Cholutecaflodens avrinningsområde. Vattenföringens tidsvariation utvärderades med en Monte Carlo-skattning av värdet på parametrarna i avbördningskurvan i ett rörligt tidsfönster av vattenföringsmätningar. Alla vattenföringsstationer uppvisade stor tidsvariation i avbördningskurvan som var störst för låga flöden, dock inte med någon gemensam trend. Problemet med den måttliga datakvaliteten bedömdes med hjälp av robusta modellparametervärden som identifierades med hjälp av beräkningsgeometriska metoder. Hypotesen att djupa parametervärdesuppsättningar var robusta testades och verifierades genom två djupfunktioner. Geometriskt djupa parametervärdesuppsättningar verkade ge bättre hydrologiska resultat än ytliga, var mindre känsliga för små ändringar i parametervärden och var bättre lämpade för förflyttning i tiden. Metoder utvecklades för att visualisera multivariata fördelningar av välpresterande parametrar baserade på de rangordnade värdena. Genom att projicera längs en gemensam dimension, kunde multivariata fördelningar av välpresterande parametrar hos modeller med varierande komplexitet jämföras med hjälp av det föreslagna visualiseringsverktyget. Det har alltså potentialen att bistå vid valet av en adekvat modellstruktur som tar hänsyn till osäkerheten i data. Dessa metoder möjliggjorde kvantifiering av observationsosäkerheter. Geometriska metoder har helt nyligen börjat användas inom hydrologin. I studien demonstrerades att de kan användas för att identifiera robusta parametervärdesuppsättningar och några av metodernas potentiella användningsområden belystes.