While some attempts have been made to model the behaviour of the grand piano action (the mechanism that translates a key press into a hammer striking a string), most researchers have reduced the system to a simple model with little relation to the components of a real action. While such models are useful for certain applications, they are not appropriate as design tools for piano makers, since the model parameters have little physical meaning and must be calibrated from the behaviour of a real action. A new model for a piano action is proposed in this thesis. The model treats each of the five main action components (key, whippen, jack, repetition lever, and hammer) as a rigid body. The action model also incorporates a contact model to determine the normal and friction forces at 13 locations between each of the contacting bodies. All parameters in the model are directly measured from the physical properties of individual action components, allowing the model to be used as a prototyping tool for actions that have not yet been built. To test whether the model can accurately predict the behaviour of a piano action, an experimental apparatus was built. Based around a keyboard from a Boston grand piano, the apparatus uses an electric motor to actuate the key, a load cell to measure applied force, and optical encoders and a high speed video camera to measure the positions of the bodies. The apparatus was found to produce highly repeatable, reliable measurements of the action. The behaviour of the action model was compared to the measurements from the experimental apparatus for several types of key blows from a pianist. A qualitative comparison showed that the model could very accurately reproduce the behaviour of a real action for high force blows. When the forces were lower, the behaviour of the action model was still reasonable, but some discrepancy from the experimental results could be seen. In order to reduce the discrepancy, it was recommended that certain improvements could be made to the action model. Rigid bodies, most importantly the key and hammer, should be replaced with flexible bodies. The normal contact model should be modified to account for the speed-independent behaviour of felt compression. Felt bushings that are modelled as perfect revolute joints should instead be modelled as flexible contact surfaces.

While some attempts have been made to model the behaviour of the grand piano action (the mechanism that translates a key press into a hammer striking a string), most researchers have reduced the system to a simple model with little relation to the components of a real action. While such models are useful for certain applications, they are not appropriate as design tools for piano makers, since the model parameters have little physical meaning and must be calibrated from the behaviour of a real action. A new model for a piano action is proposed in this thesis. The model treats each of the five main action components (key, whippen, jack, repetition lever, and hammer) as a rigid body. The action model also incorporates a contact model to determine the normal and friction forces at 13 locations between each of the contacting bodies. All parameters in the model are directly measured from the physical properties of individual action components, allowing the model to be used as a prototyping tool for actions that have not yet been built. To test whether the model can accurately predict the behaviour of a piano action, an experimental apparatus was built. Based around a keyboard from a Boston grand piano, the apparatus uses an electric motor to actuate the key, a load cell to measure applied force, and optical encoders and a high speed video camera to measure the positions of the bodies. The apparatus was found to produce highly repeatable, reliable measurements of the action. The behaviour of the action model was compared to the measurements from the experimental apparatus for several types of key blows from a pianist. A qualitative comparison showed that the model could very accurately reproduce the behaviour of a real action for high force blows. When the forces were lower, the behaviour of the action model was still reasonable, but some discrepancy from the experimental results could be seen. In order to reduce the discrepancy, it was recommended that certain improvements could be made to the action model. Rigid bodies, most importantly the key and hammer, should be replaced with flexible bodies. The normal contact model should be modified to account for the speed-independent behaviour of felt compression. Felt bushings that are modelled as perfect revolute joints should instead be modelled as flexible contact surfaces.

This thesis deals with multibody dynamic simulation of mechanical systems in the product development process. The approach is to make the process of multibody dynamics simulation more efficient by structuring of the simulation, simulation models and their usage. Previous work has concentrated on developing faster calculation methods and more specialised simulation software. Efforts have been made to clarify how computer tools and multibody dynamic analysis methods are used in product development in industry today. Insight into the knowledge domains of product development and multibody dynamics is given together with an introduction to the area of distributed simulation, modularisation techniques and nonlinear analysis. The mentioned domains have traditionally been separated but the introduction of concurrent engineering and faster computers puts new demands on the need for integration of computer support and analysis in the development process. The performed work is to be seen as cross-functional work in order to bring different domains together for the sake of a better total product development. The applications areas used in the work are all within vehicle system dynamics. A proposal for performing the multibody dynamics methodology in a distributed and modular way in the product development process is given based on the performed work together with a prototype implementation.

Indiana University-Purdue University Indianapolis (IUPUI) / Khakpour, Zahra M.S.M.E., Purdue University, May 2017. Multibody Dynamics Model of A Full Human Body For Simulating Walking, Major Professor: Hazim El-Mounayri. Bipedal robotics is a relatively new research area which is concerned with creating walking robots which have mobility and agility characteristics approaching those of humans. Also, in general, simulation of bipedal walking is important in many other applications such as: design and testing of orthopedic implants; testing human walking rehabilitation strategies and devices; design of equipment and facilities for human/robot use/interaction; design of sports equipment; and improving sports performance & reducing injury. One of the main technical challenges in that bipedal robotics area is developing a walking control strategy which results in a stable and balanced upright walking gait of the robot on level as well as non-level (sloped/rough) terrains. In this thesis the following aspects of the walking control strategy are developed and tested in a high-fidelity multibody dynamics model of a humanoid body model: 1. Kinematic design of a walking gait using cubic Hermite splines to specify the motion of the center of the foot. 2. Inverse kinematics to compute the legs joint angles necessary to generate the walking gait. 3. Inverse dynamics using rotary actuators at the joints with PD (Proportional-Derivative) controllers to control the motion of the leg links. The thee-dimensional multibody dynamics model is built using the DIS (Dynamic Interactions Simulator) code. It consists of 42 rigid bodies representing the legs, hip, spine, ribs, neck, arms, and head. The bodies are connected using 42 revolute joints with a rotational actuator along with a PD controller at each joint. A penalty normal contact force model along with a polygonal contact surface representing the bottom of each foot is used to model contact between the foot and the terrain. Friction is modeled using an asperity-based friction model which approximates Coulomb friction using a variable anchor-point spring in parallel with a velocity dependent friction law. In this thesis, it is assumed in the model that a balance controller already exists to ensure that the walking motion is balanced (i.e. that the robot does not tip over). A multi-body dynamic model of the full human body is developed and the controllers are designed to simulate the walking motion. This includes the design of the geometric model, development of the control system in kinematics approach, and the simulation setup.

The focus of interest in this study is the RHex robot, which is a hexapod robot that is capable of locomotion over rugged, fractured terrain through statically and dynamically stable gaits while stability of locomotion is preserved. RHex is primarily a research platform that is based on over five years of previous research. The purpose of the study is to build a virtual prototype of RHex robot in order to simulate different behavior without manufacturing expensive prototypes. The virtual prototype is modeled in MSC ADAMS software which is a very useful program to simulate flexible multibody dynamical systems. The flexible half circular legs are modeled in a finite element program (MSC NASTRAN) and are embedded in the main model. Finally a closed loop control mechanism is built in MATLAB to be able to simulate real autonomous RHex robot. The interaction of MATLAB and MSC ADAMS softwares is studied.

Indiana University-Purdue University Indianapolis (IUPUI) / In this thesis, a high- fidelity multibody dynamics model of a backhoe for simulating the digging operation is developed using the DIS (Dynamic Interactions Simulator)multibody dynamics software. Sand is used as a sample digging material to illustrate the model. The backhoe components (such as frame, manipulators links,track segments, wheels and sprockets) are modeled as rigid bodies. The geometry of the major moving components of the backhoe is created using the Pro/E solid modeling software. The components of the backhoe are imported to DIS and connected using joints (revolute, cylindrical and prismatic joints). Rotary and linear actuators along with PD (Proportional-Derivative) controllers are used to move and steer the backhoe and to move the backhoes manipulator in the desired trajectory. Sand is modeled using cubic shaped particles that can come into contact with each other, the backhoes bucket and ground. A cubical sand particle contact surface is modeled using eight spheres that are rigidly glued to each other to form a cubical shaped particle, The backhoe and ground surfaces are modeled as polygonal surfaces. A penalty technique is used to impose both joint and normal contact constraints (including track-wheels, track-terrain, bucket-particles and particles-particles contact). An asperity-based friction model is used to model joint and contact friction. A Cartesian Eulerian grid contact search algorithm is used to allow fast contact detection between particles. A recursive bounding box contact search algorithm is used to allow fast contact detection for polygonal contact surfaces and is used to detect contact between: track and ground; track and wheels; bucket and particles; and ground and particles. The governing equations of motion are solved along with joint/constraint equations using a time-accurate explicit solution procedure. The sand model is validated using a conical hopper sand flow experiment in which the sand flow rate during discharge and the angle of repose of the resulting sand pile are experimentally measured. The results of the conical hopper simulation are compared with previously published experimental results. Parameter studies are performed using the sand model to study the e ffects of the particle size and the orifi ces diameter of the hopper on the sand pile angle of repose and sand flow rate. The sand model is integrated with the backhoe model to simulate a typical digging operation. The model is used to predict the manipulators actuator forces needed to dig through a pile of sand. Integrating the sand model and backhoe model can help improving the performance of construction equipment by predicting, for various vehicle design alternatives: the actuator and joint forces, and the vehicle stability during digging.

La quête de minimisation du ratio poids-puissance, omniprésente dans l'industrie aéronautique, conduit à une plus grande souplesse structurelle des boîtes de transmission de puissance d'hélicoptères.Cette souplesse structurelle, associée aux sollicitations sévères mises en jeu, entraîne des déformations non négligeables des arbres et carters, et nuit naturellement à la tenue en service des roulements.S'il n’est pas maîtrisé, le désalignement des portées de roulements accroît fortement les efforts vus par la cage et peut conduire à sa rupture en fatigue.Le travail proposé s'intéresse à la modélisation du comportement dynamique des roulements de réducteurs aéronautiques et vise plus particulièrement à anticiper ce mode de ruine.Le modèle développé permet d'estimer les sollicitations de la cage en fonctionnement.Ces informations, précieuses aux ingénieurs, permettront de mieux maîtriser, et donc d'optimiser le processus de dimensionnement des roulements. / The quest for minimizing the power to weight ratio, omnipresent in the aircraft industry, has led to greater structural flexibility of helicopter gearboxes.This increasing flexibility combined with the severe loads which it involves, causes significant strains on shafts and housings, and may be detrimental to rolling bearing service life expectancy.An unchecked misalignment of bearing seats greatly increases cage stresses and it may cause its premature fatigue failure.The present work focuses on modeling the dynamic behavior of rolling bearings of aeronautical gearboxes and it specifically anticipates this failure mode.The model developed is able to estimate cage stresses in operation. This information is valuable to engineers, it allows a better control and thus an optimization of the rolling bearings design process.

Indiana University-Purdue University Indianapolis (IUPUI) / In this thesis, an explicit time integration code which integrates multibody dynamics and the discrete element method is used for modelling the excavation and moving operation of cohesive soft soil (such as mud and snow) by bulldozers. A soft cohesive soil material model (that includes normal and tangential inter-particle force models) is used that can account for soil compressibility, plasticity, fracture, friction, viscosity and gain in cohesive strength due to compression. In addition, a time relaxation sub-model for the soil plastic deformation and cohesive strength is added in order to account for loss in soil cohesive strength and reduced bulk density due to tension or removal of the compression. This is essential in earth moving applications since the soil that is dug typically becomes loose soil that has lower shear strength and lower bulk density (larger volume) than compacted soil. If the model does not account for loss of soil shear strength then the dug soil pile in front of the blade of a bulldozer will have an artificially high shear strength. A penalty technique is used to impose joint and normal contact constraints. An asperity-based friction model is used to model contact and joint friction. A Cartesian Eulerian grid contact search algorithm is used to allow fast contact detection between particles. A recursive bounding box contact search algorithm is used to allow fast contact detection between the particles and polygonal contact surfaces. A multibody dynamics bulldozer model is created which includes the chassis/body, C-frame, blade, wheels and hydraulic actuators. The components are modelled as rigid bodies and are connected using revolute and prismatic joints. Rotary actuators along with PD (Proportional-Derivative) controllers are used to drive the wheels. Linear actuators along with PD controllers are used to drive the hydraulic actuators. Polygonal contact surfaces are defined for the tires and blade to model the interaction between the soil and the bulldozer. Simulations of a bulldozer performing typical shallow digging operations in a cohesive soil are presented. The simulation of a rear wheel drive bulldozer shows that, it has a limited digging capacity compared to the 4-wheel drive bulldozer. The effect of the relaxation parameter can be easily observed from the variation in the Bulldozer's velocity. The higher the relaxation parameter, the higher is the bulldozer's velocity while it is crossing over the soil patch. For the low penetration depth run the bulldozer takes less time compared to high penetration depth. Also higher magnitudes of torques at front and rear wheels can be observed in case of high penetration depth. The model is used to predict the wheel torque, wheel speed, vehicle speed and actuator forces during shallow digging operations on three types of soils and at two blade penetration depths. The model presented can be used to predict the motion, loads and required actuators forces and to improve the design of the various bulldozer components such as the blade, tires, engine and hydraulic actuators.