Desde comienzos del siglo XXI, los sistemas de radiodifusión terrestre han sido culpados de un uso ineficiente del espectro asignado. Para aumentar la eficiencia espectral, los organismos de estandarización de TV digital comenzaron a desarrollar la evolución técnica de los sistemas de TDT de primera generación. Entre otros, uno de los objetivos principales de los sistemas de TDT de próxima generación (DVB-T2 y ATSC 3.0) es proporcionar simultáneamente servicios de TV a dispositivos móviles y fijos. El principal inconveniente de esta entrega simultánea son los diferentes requisitos de cada condición de recepción. Para abordar estas limitaciones, se han considerado diferentes técnicas de multiplexación. Mientras que DVB-T2 acomete la entrega simultánea de los dos servicios mediante TDM, ATSC 3.0 adoptó la Multiplexación por División en Capas (LDM). LDM puede superar a TDM y a FDM al aprovechar la relación de Protección de Error Desigual (UEP), ya que ambos servicios, llamados capas, utilizan todos los recursos de frecuencia y tiempo con diferentes niveles de potencia. En el lado del receptor, se distinguen dos implementaciones, de acuerdo con la capa a decodificar. Los receptores móviles solo están destinados a obtener la capa superior, conocida como Core Layer (CL). Para no aumentar su complejidad en comparación con los receptores de capa única, la capa inferior, conocida como Enhanced Layer (EL), es tratada como un ruido adicional en la decodificación. Los receptores fijos aumentan su complejidad, ya que deben realizar un proceso de Cancelación de Interferencia (SIC) sobre la CL para obtener la EL. Para limitar la complejidad adicional de los receptores fijos, las capas de LDM en ATSC 3.0 están configuradas con diferentes capacidades de corrección, pero comparten el resto de bloques de la capa física, incluido el TIL, el PP, el tamaño de FFT, y el GI. Esta disertación investiga tecnologías avanzadas para optimizar el rendimiento de LDM. Primero se propone una optimización del proceso de demapeo para las dos capas de LDM. El algoritmo propuesto logra un aumento de capacidad, al tener en cuenta la forma de la EL en el proceso de demapeo de la CL. Sin embargo, el número de distancias Euclidianas a computar puede aumentar significativamente, conduciendo no solo a receptores fijos más complejos, sino también a receptores móviles más complejos. A continuación, se determina la configuración de piloto ATSC 3.0 más adecuada para LDM. Teniendo en cuenta que las dos capas comparten el mismo PP, surge una contrapartida entre la densidad de pilotos (CL) y la redundancia sobre los datos (EL). A partir de los resultados de rendimiento, se recomienda el uso de un PP no muy denso, ya que ya han sido diseñados para hacer frente a ecos largos y altas velocidades. La amplitud piloto óptima depende del estimador de canal en los receptores (ej., se recomienda la amplitud mínima para una implementación Wiener, mientras que la máxima para una implementación FFT). También se investiga la potencial transmisión conjunta de LDM con tres tecnologías avanzadas adoptadas en ATSC 3.0: las tecnologías de agregación MultiRF, los esquemas de MISO distribuido y los de MIMO colocalizado. Se estudian los potenciales casos de uso, los aspectos de implementación del transmisor y el receptor, y las ganancias de rendimiento de las configuraciones conjuntas para las dos capas de LDM. Las restricciones adicionales de combinar LDM con las tecnologías avanzadas se consideran admisibles, ya que las mayores demandas ya están contempladas en ATSC 3.0 (ej., una segunda cadena de recepción). Se obtienen ganancias significativas en condiciones de recepción peatonal gracias a la diversidad en frecuencia proporcionada por las tecnologías MultiRF. La conjunción de LDM con esquemas de MISO proporciona ganancias de rendimiento significativas en redes SFN para la capa fija con el esquema de Alamouti. / Since the beginning of the 21st century, terrestrial broadcasting systems have been blamed of an inefficient use of the allocated spectrum. To increase the spectral efficiency, digital television Standards Developing Organizations settled to develop the technical evolution of the first-generation DTT systems. Among others, a primary goal of next-generation DTT systems (DVB-T2 and ATSC 3.0) is to simultaneously provide TV services to mobile and fixed devices. The major drawback of this simultaneous delivery is the different requirement of each reception condition. To address these constraints different multiplexing techniques have been considered. While DVB-T2 fulfilled the simultaneous delivery of the two services by TDM, ATSC 3.0 adopted the LDM technology. LDM can outperform TDM and FDM by taking advantage of the UEP ratio, as both services, namely layers, utilize all the frequency and time resources with different power levels. At receiver side, two implementations are distinguished, according to the intended layer. Mobile receivers are only intended to obtain the upper layer, known as CL. In order not to increase their complexity compared to single layer receivers, the lower layer, known as EL is treated as an additional noise on the CL decoding. Fixed receivers, increase their complexity, as they should performed a SIC process on the CL for getting the EL. To limit the additional complexity of fixed receivers, the LDM layers in ATSC 3.0 are configured with different error correction capabilities, but share the rest of physical layer parameters, including the TIL, the PP, the FFT size, and the GI. This dissertation investigates advanced technologies to optimize the LDM performance. A demapping optimization for the two LDM layers is first proposed. A capacity increase is achieved by the proposed algorithm, which takes into account the underlying layer shape in the demapping process. Nevertheless, the number of Euclidean distances to be computed can be significantly increased, contributing to not only more complex fixed receivers, but also more complex mobile receivers. Next, the most suitable ATSC 3.0 pilot configuration for LDM is determined. Considering the two layers share the same PP a trade-off between pilot density (CL) and data overhead (EL) arises. From the performance results, it is recommended the use of a not very dense PP, as they have been already designed to cope with long echoes and high speeds. The optimum pilot amplitude depends on the channel estimator at receivers (e.g. the minimum amplitude is recommended for a Wiener implementation, while the maximum for a FFT implementation). The potential combination of LDM with three advanced technologies that have been adopted in ATSC 3.0 is also investigated: MultiRF technologies, distributed MISO schemes, and co-located MIMO schemes. The potential use cases, the transmitter and receiver implementations, and the performance gains of the joint configurations are studied for the two LDM layers. The additional constraints of combining LDM with the advanced technologies is considered admissible, as the greatest demands (e.g. a second receiving chain) are already contemplated in ATSC 3.0. Significant gains are found for the mobile layer at pedestrian reception conditions thanks to the frequency diversity provided by MultiRF technologies. The conjunction of LDM with distributed MISO schemes provides significant performance gains on SFNs for the fixed layer with Alamouti scheme. Last, considering the complexity in the mobile receivers and the CL performance, the recommended joint configuration is MISO in the CL and MIMO in the EL. / Des de començaments del segle XXI, els sistemes de radiodifusió terrestre han sigut culpats d'un ús ineficient de l'espectre assignat. Per a augmentar l'eficiència espectral, els organismes d'estandardització de TV digital van començar a desenvolupar l'evolució tècnica dels sistemes de TDT de primera generació. Entre altres, un dels objectius principals dels sistemes de TDT de pròxima generació (DVB-T2 i el ATSC 3.0) és proporcionar simultàniament serveis de TV a dispositius mòbils i fixos. El principal inconvenient d'aquest lliurament simultani són els diferents requisits de cada condició de recepció. Per a abordar aquestes limitacions, s'han considerat diferents tècniques de multiplexació. Mentre que DVB-T2 escomet el lliurament simultani dels dos serveis mitjançant TDM, ATSC 3.0 va adoptar la Multiplexació per Divisió en Capes (LDM). LDM pot superar a TDM i a FDM en aprofitar la relació de Protecció d'Error Desigual (UEP), ja que tots dos serveis, cridats capes, utilitzen tots els recursos de freqüència i temps amb diferents nivells de potència. En el costat del receptor, es distingeixen dues implementacions, d'acord amb la capa a decodificar. Els receptors mòbils solament estan destinats a obtenir la capa superior, coneguda com Core Layer (CL). Per a no augmentar la seua complexitat en comparació amb els receptors de capa única, la capa inferior, coneguda com Enhanced Layer (EL), és tractada com un soroll addicional en la decodificació. Els receptors fixos augmenten la seua complexitat, ja que han de realitzar un procés de Cancel·lació d'Interferència (SIC) sobre la CL per a obtenir l'EL. Per a limitar la complexitat addicional dels receptors fixos, les capes de LDM en ATSC 3.0 estan configurades amb diferents capacitats de correcció, però comparteixen la resta de blocs de la capa física, inclòs el TIL, el PP, la grandària de FFT i el GI. Aquesta dissertació investiga tecnologies avançades per a optimitzar el rendiment de LDM. Primer es proposa una optimització del procés de demapeo per a les dues capes de LDM. L'algoritme proposat aconsegueix un augment de capacitat, en tenir en compte la forma de l'EL en el procés de demapeo de la CL. No obstant açò, el nombre de distàncies Euclidianes a computar pot augmentar significativament, conduint NO sols a receptors fixos més complexos, sinó també a receptors mòbils més complexos. A continuació, es determina la configuració de pilot ATSC 3.0 més adequada per a LDM. Tenint en compte que les dues capes comparteixen el mateix PP, es produeix una contrapartida entre la densitat de pilots (CL) i la redundància sobre les dades (EL). A partir dels resultats de rendiment, es recomana l'ús d'un PP no gaire dens, ja que ja han sigut dissenyats per a fer front a ecos llargs i altes velocitats. L'amplitud pilot òptima depèn de l'estimador de canal en els receptors (ex., es recomana l'amplitud mínima per a una implementació Wiener, mentre que la màxima per a una implementació FFT). També s'investiga la potencial transmissió conjunta de LDM amb tres tecnologies avançades adoptades en ATSC 3.0: les tecnologies d'agregació de MultiRF, els esquemes de MISO distribuït i els de MIMO colocalitzat. S'estudien els potencials casos d'ús, els principals aspectes d'implementació del transmissor i el receptor, i els guanys de rendiment de les configuracions conjuntes per a les dues capes de LDM. Les restriccions addicionals de combinar LDM amb les tecnologies avançades es consideren admissibles, ja que les majors demandes ja estan contemplades en ATSC 3.0 (ex., una segona cadena de recepció). S'obtenen guanys significatius per a la capa mòbil en condicions de recepció per als vianants gràcies a la diversitat en freqüència proporcionada per les tecnologies MultiRF. La conjunció de LDM amb esquemes MISO distribuïts proporciona guanys de rendiment significatius en xarxes SFN per a la capa fixa amb l'esquema d'Alamouti. / Garro Crevillén, E. (2018). Advanced Layered Divsion Multiplexing Technologies for Next-Gen Broadcast [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/105559 / TESIS

The work focuses on introduction to the topic of wireless sensor networks and brings readers the various aspects of problem solving in these networks. Work is closely focused on the energy performance when communicating between devices on a network and discusses the causes of excessive energy consumption. It also addresses the mechanisms for saving energy and is also engaged today protocols that its contribution to proposing solutions to problems. The author had also proposes an adapted protocol, based on lessons learned from previous theoretical sources.

In this thesis, we investigate physical-layer network coding in an L × M × K relay network, where L source nodes want to transmit messages to K sink nodes via M relay nodes. We focus on the information processing at the relay nodes and the compute-and-forward framework. Nested lattice codes are used, which have the property that every linear combination of codewords is a valid codeword. This property is essential for physical-layer network coding. Because the actual network coding occurs on the physical layer, the network coding coefficients are determined by the channel realizations. Finding the optimal network coding coefficients for given channel realizations is a non-trivial optimization problem. In this thesis, we provide an algorithm to find network coding coefficients that result in the highest data rate at a chosen relay. The solution of this optimization problem is only locally optimal, i.e., it is optimal for a particular relay. If we consider a multi-hop network, each potential receiver must get enough linear independent combinations to be able to decode the individual messages. If this is not the case, outage occurs, which results in data loss. In this thesis, we propose a new strategy for choosing the network coding coefficients locally at the relays without solving the optimization problem globally. We thereby reduce the solution space for the relays such that linear independence between their decoded linear combinations is guaranteed. Further, we discuss the influence of spatial correlation on the optimization problem. Having solved the optimization problem, we combine physical-layer network coding with physical-layer secrecy. This allows us to propose a coding scheme to exploit untrusted relays in multi-user relay networks. We show that physical-layer network coding, especially compute-and-forward, is a key technology for simultaneous and secure communication of several users over an untrusted relay. First, we derive the achievable secrecy rate for the two-way relay channel. Then, we enhance this scenario to a multi-way relay channel with multiple antennas. We describe our implementation of the compute-and-forward framework with software-defined radio and demonstrate the practical feasibility. We show that it is possible to use the framework in real-life scenarios and demonstrate a transmission from two users to a relay. We gain valuable insights into a real transmission using the compute-and-forward framework. We discuss possible improvements of the current implementation and point out further work. / In dieser Arbeit untersuchen wir Netzwerkcodierung auf der Übertragungsschicht in einem Relay-Netzwerk, in dem L Quellen-Knoten Nachrichten zu K Senken-Knoten über M Relay-Knoten senden wollen. Der Fokus dieser Arbeit liegt auf der Informationsverarbeitung an den Relay-Knoten und dem Compute-and-Forward Framework. Es werden Nested Lattice Codes eingesetzt, welche die Eigenschaft besitzen, dass jede Linearkombination zweier Codewörter wieder ein gültiges Codewort ergibt. Dies ist eine Eigenschaft, die für die Netzwerkcodierung von entscheidender Bedeutung ist. Da die eigentliche Netzwerkcodierung auf der Übertragungsschicht stattfindet, werden die Netzwerkcodierungskoeffizienten von den Kanalrealisierungen bestimmt. Das Finden der optimalen Koeffizienten für gegebene Kanalrealisierungen ist ein nicht-triviales Optimierungsproblem. Wir schlagen in dieser Arbeit einen Algorithmus vor, welcher Netzwerkcodierungskoeffizienten findet, die in der höchsten Übertragungsrate an einem gewählten Relay resultieren. Die Lösung dieses Optimierungsproblems ist zunächst nur lokal, d. h. für dieses Relay, optimal. An jedem potentiellen Empfänger müssen ausreichend unabhängige Linearkombinationen vorhanden sein, um die einzelnen Nachrichten decodieren zu können. Ist dies nicht der Fall, kommt es zu Datenverlusten. Um dieses Problem zu umgehen, ohne dabei das Optimierungsproblem global lösen zu müssen, schlagen wir eine neue Strategie vor, welche den Lösungsraum an einem Relay soweit einschränkt, dass lineare Unabhängigkeit zwischen den decodierten Linearkombinationen an den Relays garantiert ist. Außerdem diskutieren wir den Einfluss von räumlicher Korrelation auf das Optimierungsproblem. Wir kombinieren die Netzwerkcodierung mit dem Konzept von Sicherheit auf der Übertragungsschicht, um ein Übertragungsschema zu entwickeln, welches es ermöglicht, mit Hilfe nicht-vertrauenswürdiger Relays zu kommunizieren. Wir zeigen, dass Compute-and-Forward ein wesentlicher Baustein ist, um solch eine sichere und simultane Übertragung mehrerer Nutzer zu gewährleisten. Wir starten mit dem einfachen Fall eines Relay-Kanals mit zwei Nutzern und erweitern dieses Szenario auf einen Relay-Kanal mit mehreren Nutzern und mehreren Antennen. Die Arbeit wird abgerundet, indem wir eine Implementierung des Compute-and-Forward Frameworks mit Software-Defined Radio demonstrieren. Wir zeigen am Beispiel von zwei Nutzern und einem Relay, dass sich das Framework eignet, um in realen Szenarien eingesetzt zu werden. Wir diskutieren mögliche Verbesserungen und zeigen Richtungen für weitere Forschungsarbeit auf.

Beim Entwurf großer Netzwerke der Automation ermöglichen Methoden der Leistungsbewertung den Test und die Dimensionierung eines Netzwerkes bereits vor der Inbetriebnahme und erlauben damit einen effizienten, qualitätsorientierten Entwurf. Es ist jedoch sehr wissensintensiv und aufwendig, entsprechende Analyse- oder Simulations-Modelle aufzustellen und die Ergebnisse auszuwerten, weshalb die Methoden in der Praxis der Automation selten verwendet werden. Viel vertrauter sind dem Entwerfer hingegen die speziellen Software-Tools, mit denen in der Automation Netzwerke entworfen werden. Auf Basis der Datenbanken dieser Tools werden in dieser Arbeit verschieden Verfahren zur automatischen Systemmodellierung, Verkehrsmodellierung, Leistungsbewertung und Fehlerdiagnose zu einem Control Network Performance Engineering kombiniert, welches die Qualitätsbewertung und -beratung nahtlos und ohne Mehraufwand in den Netzwerkentwurf integriert. (Die Dissertation wurde veröffentlicht im Jörg Vogt Verlag, Voglerstr. 20, 01277 Dresden, Internet: http://www.vogtverlag.de/, email: info@vogtverlag.de, ISBN 978-3-938860-10-6) / During the design of large automation networks, performance analysis methods can be used for testing and dimensioning the network before implementation and are essential for an efficient and reliable design process. However, setting up the necessary analytical or simulative models is time-consuming, requires in-depth knowledge, and is therefore often not applicable in practice. The network designers are much more used to the design tools used to develop automation networks. Based on these tools' databases various methods for automated system and traffic modeling, performance analysis and diagnoses are combined in the control network performance engineering that seamlessly integrates quality analysis and consulting into network design without requiring additional effort. (This manuscript is also available - in the form of a book - from Jörg Vogt Verlag, Voglerstr. 20, 01277 Dresden, Germany world-wide web address: http://www.vogtverlag.de/, electronic-mail address: info@vogtverlag.de, ISBN 978-3-938860-10-6 )

Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters.

Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters.

Today’s communication systems are in need of spectrally efficient and high throughput techniques more than ever because of high data rate applications and the scarcity and expense of bandwidth. To cope with increased data rate demands, more base stations are needed which is not cost and energy efficient in cellular networks. It has been shown that wireless relay networks can provide higher network throughput and increase power efficiency with low complexity and cost. Furthermore, network resources can be utilized more efficiently by using network coding in relay networks. A wireless relay network in which multiple nodes exchange information with the help of relay node(s) is called a multi-way relay channel (MWRC). MWRCs are expected to be an integral part of next generation wireless standards. The main focus of this dissertation is the investigation of transmission schemes in an MWRC to improve the throughput and error performance. An MWRC with full data exchange is assumed in which a half-duplex relay station (RS) is the enabler of communication. One of the challenges with signal demodulation in MWRCs is the existence of ambiguous points in the received constellation. The first part of this dissertation investigates a transmission scheme for full data exchange in MWRC that benefits from these points and improves its throughput by 33% compared to traditional relaying. Then an MWRC is considered where a RS assists multiple nodes to exchange messages. A different approach is taken to avoid ambiguous points in the superposition of user symbols at the relay. This can be achieved by employing complex field network coding (CFNC) which results in full data exchange in two communication phases. CFNC may lead to small Euclidean distances between constellation points, resulting in poor error performance. To improve this performance, the optimal user precoding values are derived such that the power efficiency of the relay constellation is highest when channel state information is available at the users. The error performance of each user is then analyzed and compared with other relaying schemes. Finally, focusing on the uplink of multi-way relay systems, the performance of an MWRC is studied in which users can employ arbitrary modulation schemes and the links between the users and the relay have different gains, e.g. Rayleigh fading. Analytical expressions for the exact average pairwise error probability of these MWRCs are derived. The probability density function (PDF) and the mean of the minimum Euclidean distance of the relay constellation are closely approximated, and a tight upper bound on the symbol error probability is developed. / Graduate

The significant advances in fiber-optic technology have broadened the optical network\'s reach into end-user business premises and even homes, allowing new services and technologies to be delivered to the customers. The next wave of innovation will certainly generate numerous opportunities provided by the widespread popularity of emerging solutions and applications such as tactile Internet, telemedicine and real time 3-D content generation, making them part of everyday life. Nevertheless, to support such an unprecedented and insatiable demand of data traffic, higher capacity and security, flexible bandwidth allocation and cost-efficiency have become crucial requirements for technologies candidate for future optical access networks. To this aim, optical code-division multiple-access (OCDMA) technology is considered as a prospective candidate, particularly due to features like asynchronous transmissions, flexible as well as conscious bandwidth resource distribution and support to differentiated services at the physical layer, to name but a few. In this context, this thesis proposes new mathematical formalisms for bit error rate, packet throughput and packet delay to assess the performance of flexible OCDMA networks capable of providing multiservice multirate transmissions according to users\' requirements. The proposed analytical formalisms do not require the knowledge a priori of the users\' code sequences, which means that the network performance can be addressed in a simple and straightforward manner using the code parameters only. In addition, the developed analytical formalisms account for a general number of distinct users\' classes as well as general probability of interference among users. Hence, these formalisms can be successfully applied for performance evaluation of flexible OCDMA networks not only under any number of users\' classes in a network, but also for most spreading codes with good correlation properties. The packet throughput expression is derived assuming Poisson, binomial and Markov chain approaches for the composite packet arrivals with the latter defined as benchmark. Then, it is shown via numerical simulation the Poisson-based expression is not appropriate for a reliable throughput estimate when compared to the benchmark (Markov) results. The binomial-based throughput equation, by its turn, provides results as accurate as the benchmark. In addition, the binomial-based throughput is numerically more convenient and computationally more efficient than the Markov chain approach, whereas the Markov-based one is computationally expensive, particularly if the number of users is large. The bit error rate (BER) expressions are derived considering gaussian and binomial distributions for the multiple-access interference and it is shown via numerical simulations that accurate performance of flexible OCDMA networks is only obtained with the binomial-based BER expression. This thesis also proposes and investigates a network architecture for Internet protocol traffic over flexible OCDMA with support to multiservice multirate transmissions, which is independent of the employed spreading code and does not require any new optical processing technology. In addition, the network performance assumes users transmitting asynchronously using receptors based on intensity-modulation direct-detection schemes. Numerical simulations shown that the proposed network performs well when its users are defined with high-weight code or when the channel utilization is low. The BER and packet throughput performance of an OCDMA network that provides multirate transmissions via multicode technique with two codes assigned to each single user is also addressed. Numerical results show that this technique outperforms classical techniques based on multilength code. Finally, this thesis addresses a new breakthrough technology that might lead to higher levels of security at the physical layer of optical networks. This technology consists in the generation of deterministic chaos from a commercial free-running vertical-cavity surface-emitting laser (VCSEL). The chaotic dynamics is generated by means of mechanical strains loaded onto an off-the-shelf quantum-well VCSEL using a simple and easily replicable holder. Deterministic chaos is then achieved, for the first time, without any additional complexity of optical feedback, parameter modulation or optical injection. The simplicity of the proposed system, which is based entirely on low-cost and easily available components, opens the way to the widespread use of commercial and free-running VCSEL devices for chaos-based applications. This off-the-shelf and cost-effective optical chaos generator has the potential for not only paving the way towards new security platforms in optical networks like, for example, successfully hiding the user information in an unpredictable, random-like signal against eventual eavesdroppers, but also for influencing emerging chaos applications initially limited or infeasible due to the lack of low-cost solutions. Furthermore, it leads the way to future realization of emerging applications with high-integrability and -scalability such as two-dimensional arrays of chaotic devices comprising hundreds of individual sources to increase requirements for random bit generation, cryptography or large-scale quantum networks. / Os avanços relacionados a tecnologia fotônica ampliaram o alcance das redes de comunicação óptica tanto em instalações de estabelecimentos comerciais quanto em residências, permitindo que novos serviços e tecnologias fossem entregues aos clientes. A próxima onda de inovação certamente gerará inúmeras oportunidades proporcionadas pela popularidade de soluções emergentes e aplicações como a Internet tátil, a telemedicina e a geração de conteúdo 3-D em tempo real, tornando-os parte da vida cotidiana. No entanto, para suportar a crescente demanda de tráfego atual, uma maior capacidade e segurança, alocação flexível de largura de banda e custo-eficiência tornaram-se requisitos cruciais para as tecnologias candidatas a futuras redes de acesso óptico. Para este fim, a tecnologia de acesso múltiplo por divisão de código óptico (OCDMA) é considerada um candidato em potencial, particularmente devido a características como transmissões assíncronas, distribuição flexível de banda larga e suporte a serviços diferenciados na camada física, para citar apenas alguns. Neste contexto, esta tese propõe novos formalismos matemáticos para a taxa de erro de bits, taxa de transferência de pacotes e atraso de pacotes para avaliar o desempenho de redes OCDMA flexíveis capazes de fornecer transmissões em múltiplas qualidades de serviço (QoS) de acordo com as necessidades dos usuários. Os formalismos analíticos propostos não requerem o conhecimento a priori das sequências de código dos usuários, o que significa que o desempenho da rede pode ser abordado de forma simples e direta usando apenas os parâmetros de código. Além disso, os formalismos analíticos desenvolvidos representam um número geral de classes de usuários distintos, bem como a probabilidade geral de interferência entre os usuários. Portanto, esses formalismos podem ser aplicados com sucesso na avaliação de desempenho de redes OCDMA flexíveis não apenas em qualquer número de classes de usuários em uma rede, mas também para a maioria dos códigos de espalhamento com boas propriedades de correlação. A expressão de taxa de transferência de pacotes é derivada assumindo aproximações de Poisson, binomial e de cadeia de Markov para as chegadas de pacotes compostos, com a última definida como benchmark. Em seguida, é mostrado via simulação numérica que a expressão baseada em Poisson não é apropriada para uma estimativa confiável de taxa de transferência quando comparada aos resultados de benchmark (Markov). A equação de taxa de transferência binomial, por sua vez, fornece resultados tão precisos quanto o benchmark. Além disso, a taxa de transferência binomial é numericamente mais conveniente e computacionalmente eficiente quando comparada com abordagem de Markov, enquanto esta última é computacionalmente dispendiosa, particularmente se o número de usuários é grande. As expressões de taxa de erro de bit (BER) são derivadas considerando distribuições gaussianas e binomiais para a interferência de acesso múltiplo e é mostrado por meio de simulações numéricas que o desempenho exato de redes OCDMA flexíveis é obtido somente com a expressão binomial de BER. Esta tese também propõe e investiga uma arquitetura de rede para o tráfego de protocolo de Internet sobre OCDMA flexível com suporte a transmissões de QoS e de múltiplas taxas, que é independente do código de espalhamento empregado e não requer qualquer nova tecnologia de processamento óptico. Além disso, o desempenho da rede assume que os usuários transmitem de forma assíncrona usando receptores baseados em esquemas de detecção direta de modulação de intensidade. As simulações numéricas mostraram que a rede proposta possui melhor desempenho quando seus usuários são definidos com peso de código alto ou quando a utilização do canal é baixa. O desempenho da BER e da taxa de transferência de pacotes de uma rede OCDMA que fornece transmissões de múltiplas taxas por meio de uma técnica multi-código com dois códigos atribuídos a cada usuário é também abordado. Os resultados numéricos mostram que esta técnica supera as técnicas clássicas baseadas no código de comprimento múltiplo. Finalmente, esta tese aborda uma nova tecnologia que pode levar a níveis mais elevados de segurança na camada física de redes ópticas. Esta tecnologia consiste na geração de caos determinístico a partir de um laser de emissão superficial com cavidade vertical (VCSEL). A dinâmica caótica é gerada através da aplicação de forças mecânicas em um VCSEL comercial usando um suporte simples e facilmente replicável. O caos determinístico é então alcançado, pela primeira vez, sem qualquer complexidade adicional de realimentação óptica, modulação de parâmetros ou injeção óptica. A simplicidade do sistema proposto, o qual se baseia inteiramente em componentes de baixo custo e que são facilmente encontrados, abre o caminho para o uso de dispositivos VCSEL comerciais para aplicações baseadas em caos. Este gerador de caos óptico tem o potencial não só de pavimentar o caminho para novas plataformas de segurança em redes ópticas, como, por exemplo, ocultar com êxito as informações do usuário em um sinal imprevisível e aleatório contra eventuais invasores, como também tem o potencial de influenciar aplicações de caos emergentes inicialmente limitadas ou inviáveis devido à falta de soluções de baixo custo. Além disso, ele conduz o caminho para a realização futura de aplicações emergentes com alta integridade e escalabilidade, tais como matrizes bidimensionais de dispositivos caóticos que compreendem centenas de fontes individuais para aumentar as necessidades de geração de bit aleatória, criptografia ou redes quânticas de grande escala.

A oferta de novos serviços para os usuários finais, como o denominado triple play, que consiste no tráfego simultâneo de voz, vídeo e dados utilizando a mesma infra-estrutura de comunicação, vem exigindo que as estruturas de rede das operadoras ofereçam largura de banda adequada e qualidade de serviço. Nesse contexto, as redes ópticas passivas (PON) vêm se destacando em virtude de oferecerem maior largura de banda a custos relativamente baixos. Nas redes ópticas passivas, trechos de fibras ópticas podem ser compartilhados entre diversos assinantes, exigindo, para isso, a utilização de técnicas de controle de acesso múltiplo. Destaque maior é dado à técnica de acesso múltiplo por divisão de códigos ópticos (OCDMA), por apresentar características tais como maior segurança e capacidade flexível sob demanda. O desempenho dessa tecnologia é basicamente limitado pela interferência de acesso múltiplo, ou interferência multiusuário (MAI). No presente trabalho, cenários OCDMA-PON utilizando códigos ópticos unidimensionais, baseados na codificação prima modificada (MPC), e bidimensionais, baseados na codificação óptica ortogonal de múltiplos comprimentos de onda (MWOOC), são descritos, e seus respectivos desempenhos investigados. Os desempenhos desses sistemas são verificados utilizando-se os seguintes esquemas de modulação: 1) On-off Keying (OOK), cujo formalismo para a codificação padded MPC (PMPC) e double padded MPC (DPMPC) foi aqui desenvolvido, 2) por posição de pulso (PPM), considerando os ruídos poissonianos de deteção, cujo formalismo foi também aqui desenvolvido, 3) por posição de pulso (PPM) considerando apenas a interferência de acesso múltiplo (MAI), 4) semelhante ao (3), porém, utilizando a técnica mitigadora de MAI via cancelamento paralelo de interferência (PIC), e 5) semelhante ao (4) porém utilizando modulação por chaveamento de frequência (FSK). Em seguida, a codificação bidimensional MWOOC, utilizando modulação OOK, é analisada com e sem a utilização de PIC. Além desses esquemas, são também incluídas, pela primeira vez nesses formalismos, técnicas de correção posterior de erro (FEC) baseadas no algoritmo Reed-Solomon (RS). A figura de mérito adotada nas simulações é baseada no cálculo da taxa de erro de bit (BER). Os resultados obtidos para os diversos casos investigados neste trabalho indicam que a combinação PIC/FEC deve ser considerada de modo a se obter níveis de BER compatíveis com a região livre de erros (BER < \'10 POT.-12\') para os cenários de redes de acesso atuais e futuros (visando atender a 32 ou 64 usuários simultâneos). / The advent of new services offered to end users, such as the so called triple play, which consists in the simultaneous traffic of voice, video, and data through the same communication infrastructure, has been pushing telecom operators towards providing adequate bandwidth as well as quality of service. This has brought the spotlight to passive optical networks (PONs) by virtue of their considerably higher bandwidth at relatively low cost. In PONs, certain fiber optic spans can be shared among different users as long as multiple access control techniques are used. One such technique is the optical code division multiple access (OCDMA) technique, which, in addition, presents improved data security and flexible capacity on demand. The performance of this technology is basically limited by multi access interference (MAI), which becomes more severe as the number of simultaneous users increases. In the present work, OCDMA-PON scenarios utilizing one- and two-dimensional optical codes separately such as modified prime codes (MPC) and multi-wavelength optical orthogonal codes (MWOOC), are described and thoroughly investigated. The performances of these systems are investigated based on the following modulation schemes: 1) On-off keying (OOK), where a new formalism for the double-padded MPC is proposed, 2) Pulse position modulation (PPM), and 3) Frequency shift keying (FSK) together with MAI mitigation technique based on parallel interference cancelation (PIC). Besides these schemes, it is also included for the first time in these formalisms forward error correction techniques (FEC) based on the Reed-Solomon (RS) algorithm. The figure of merit adopted in all simulations is the bit error rate (BER). The results obtained for the cases investigated in this work indicate that the combination PIC/FEC must be considered if one is interested in obtaining BER levels compatible with the error-free region (BER < \'10 POT.-12\') for the current and future access network scenarios (aiming at attending 32 or 64 simultaneous users).

Auf dem Gebiet der drahtlosen Kommunikation und insbesondere auf den tieferen Netzwerkschichten sind gewaltige Fortschritte zu verzeichnen. Innovative Konzepte und Technologien auf der physikalischen Schicht (PHY) gehen dabei zeitnah in zelluläre Netze ein. Drahtlose Maschennetzwerke (WMNs) können mit diesem Innovationstempo nicht mithalten. Die Mehrnutzer-Kommunikation ist ein Grundpfeiler vieler angewandter PHY Technologien, die sich in WMNs nur ungenügend auf die etablierte Schichtenarchitektur abbilden lässt. Insbesondere ist das Problem des Scheduling in WMNs inhärent komplex. Erstaunlicherweise ist der Mehrfachzugriff mit Trägerprüfung (CSMA) in WMNs asymptotisch optimal obwohl das Verfahren eine geringe Durchführungskomplexität aufweist. Daher stellt sich die Frage, in welcher Weise das dem CSMA zugrunde liegende Konzept des konkurrierenden Wettbewerbs (engl. Contention) für die Integration innovativer PHY Technologien verwendet werden kann. Opportunistische Kommunikation ist eine Technik, die die inhärenten Besonderheiten des drahtlosen Kanals ausnutzt. In der vorliegenden Dissertation werden CSMA-basierte Protokolle für die opportunistische Kommunikation in WMNs entwickelt und evaluiert. Es werden dabei opportunistisches Routing (OR) im zustandslosen Kanal und opportunistisches Scheduling (OS) im zustandsbehafteten Kanal betrachtet. Ziel ist es, den Durchsatz von elastischen Paketflüssen gerecht zu maximieren. Es werden Modelle für Überlastkontrolle, Routing und konkurrenzbasierte opportunistische Kommunikation vorgestellt. Am Beispiel von IEEE 802.11 wird illustriert, wie der schichtübergreifende Entwurf in einem Netzwerksimulator prototypisch implementiert werden kann. Auf Grundlage der Evaluationsresultate kann der Schluss gezogen werden, dass die opportunistische Kommunikation konkurrenzbasiert realisierbar ist. Darüber hinaus steigern die vorgestellten Protokolle den Durchsatz im Vergleich zu etablierten Lösungen wie etwa DCF, DSR, ExOR, RBAR und ETT. / In the field of wireless communication, a tremendous progress can be observed especially at the lower layers. Innovative physical layer (PHY) concepts and technologies can be rapidly assimilated in cellular networks. Wireless mesh networks (WMNs), on the other hand, cannot keep up with the speed of innovation at the PHY due to their flat and decentralized architecture. Many innovative PHY technologies rely on multi-user communication, so that the established abstraction of the network stack does not work well for WMNs. The scheduling problem in WMNs is inherent complex. Surprisingly, carrier sense multiple access (CSMA) in WMNs is asymptotically utility-optimal even though it has a low computational complexity and does not involve message exchange. Hence, the question arises whether CSMA and the underlying concept of contention allows for the assimilation of advanced PHY technologies into WMNs. In this thesis, we design and evaluate contention protocols based on CSMA for opportunistic communication in WMNs. Opportunistic communication is a technique that relies on multi-user diversity in order to exploit the inherent characteristics of the wireless channel. In particular, we consider opportunistic routing (OR) and opportunistic scheduling (OS) in memoryless and slow fading channels, respectively. We present models for congestion control, routing and contention-based opportunistic communication in WMNs in order to maximize both throughput and fairness of elastic unicast traffic flows. At the instance of IEEE 802.11, we illustrate how the cross-layer algorithms can be implemented within a network simulator prototype. Our evaluation results lead to the conclusion that contention-based opportunistic communication is feasible. Furthermore, the proposed protocols increase both throughput and fairness in comparison to state-of-the-art approaches like DCF, DSR, ExOR, RBAR and ETT.