Abstract: A brief overview of this PhD thesis, The emergence of nanotechnology has stimulated both fundamental and industrially relevant studies of the catalytic activity of noble metal nanoparticles. Palladium, ruthenium and gold are well known catalysts when used in nanoparticle- based systems. This body of work endeavoured to investigate the catalytic activity of these noble metal nanoparticles through three studies as a briefly overviewed below. Study 1: Palladium is a well-known catalyst, even in bulk phases, but its high cost had driven industry towards its use in nanoparticle- based systems well before nanotechnology had attracted the attention of the media. Palladium nanoparticles often show remarkable catalytic activity and selectivity, particularly for the hydrogenation of some unsaturated hydrocarbons, such as alkenes, alkynes and unsaturated carbonyl compounds. The nature of supports can affect the catalytic activity and selectivity of metal-support interaction. Natural polymeric supports, such as wool, can be suitable for new generation of composite materials incorporating nanosized metal nanoparticles and have the added advantage of being “environmentally friendly”. Catalytic hydrogenation of cyclohexene to cyclohexane by palladium nanoparticles immobilized on wool was demonstrated by using a Parr high pressure hydrogenation set-up. The efficiency of the process was explored over loading rates from 1.6% to 2.6% of palladium nanoparticles (by weight) with a variety of particle sizes. Optimization of the reaction conditions including, stirring rate, amounts of reactants, gas pressure and target temperature, led to series of catalytic activity tests carried out for 5 or 24 hours (each) at 400psi H2 and 40 oC using a stirring rate 750 rpm. Product mixtures were analysed using gas chromatography (GC-FID) to determine conversions. Samples S1 and S2 proved to be the most active catalysts because the average Pd particle size was around ~5 nm and the particles were more accessible for the reactant (i.e., Pd particles were on the surface of wool). However, under the catalytic testing conditions studied, wool (Pd/wool) did not show advantages over commercially used palladium nanoparticles on activated carbon (Pd/C). Study 2: Ruthenium fabricated as noble metal nanoparticles can be catalytically active for hydrogenation of organic compounds. However, a challenging issue for researchers is that Ru nanocatalysts can be spontaneously deactivated due to effects, such as sintering or leaching of active components, oxidation of noble metal nanoparticles, inactive metal or metal oxide deposition and impurities in solvents and reagents. Calcination of noble metal nanoparticles is one option for reactivation of Ru nanoparticles immobilized on SiO2 (Ru/SiO2) utilized as nanocatalysts in chemical reactions. In fact, the catalytic activity of noble metal nanoparticles is known to be proportional to the active part of the surface area. The effects of calcinations on catalytic activity of “shape- specific” 0.1 wt% Ru/SiO2 for hydrogenation of cyclohexene to cyclohexane were investigated. Optimization of calcinations by varying temperature and time proved to be effective on the activity of nanocatalysts retaining the Ru nanocatalysts shapes for the hydrogenation of cyclohexene. Product mixtures were analysed using gas chromatography (GC-FID) to determine conversions. The Ru catalysts showed the highest activity (100%) when they were activated by calcination following protocol No.1 in a furnace under the mildest reductive conditions studied (temperature = 200 oC for 1 hour, which was the shortest calcination time). HRTEM study showed only minor deformation of the Ru nanoparticles and minimal aggregation for this type of activation. Study 3: Supported gold nanoparticles have excited much interest owing to their unusual and somewhat unexpected catalytic activity particularly with the selective oxidation of organic compounds. Gold nanoparticles immobilized on Norit activated carbon (Au101/C) via colloidal deposition gave high selectivity of benzyl alcohol oxidation. The presence of a base (K2CO3) increased the catalytic activity of gold nanocatalysts (which was negligible in the absence of base) through dehydrogenation of the alcohol via deprotonation of a primary OH groups, and helped overcome the rate-limitation step of the oxidation process. The interaction between the gold species and the support was investigated by measuring change in catalytic activity with different activation methods (i.e., washing with a solvent at elevated temperature, and/or followed by calcinations). A mixture of benzyl alcohol as a reactant, methanol as a solvent, K2CO3 as a base and oxygen gas was studied by the activated gold nanocatalysts using a mini reactor set-up. The efficiency of the process was explored by varying the amounts of benzyl alcohol and the base, target temperature, metal loading of the gold catalysts rate and the solvent, between 3 and 24 hours at 73 psi O2 and a stirring rate (750 rpm). The samples of the reaction mixture were centrifuged and analysed by highperformance liquid chromatography (HPLC) to determine conversions. The effect of size on the catalytic activity was studied for different types of gold particles (Au101, Aunaked and Aucitrate) and clusters (Au8 and Au9) immobilized on powder Norit activated carbon. The highest activity of benzyl alcohol oxidation was observed for activated 1.0 wt% Au101/C catalysts (washed with toluene and followed by calcination under vacuum at 100 oC for 3 h) for ~3.5 nm gold particles. Additionally, the support effect was studied for gold particles immobilized on different types of carbons, such as Norit activated carbon (powder, granular and powdered) and mesoporous carbons (CMK-3, CMK-8 and NCCR-41), granular modified carbon (–SH and –SO3H groups) and Vulcan carbon. The highest activity was observed by activated 1.0 wt% Au101/C8 catalysts (washed with toluene and followed by calcination under vacuum at 100 oC for 3 h). Activated 1% Au101/C41 (washed with toluene followed by calcination under vacuum at 100 oC for 3 hours) with 2.6 ± 0.1 nm gold particle size showed the highest selectivity towards methyl benzoate as a main product (S%: 88%) after 3 hours reaction time. However, activated 1% Au101/C (calcination in O2 -H2 at 100 oC for 3 hours) with 6.6 ± 0.3 nm gold particle size exhibited the highest selectivity towards benzoic acid as a main product (S: 86%) after 24 hours reaction time.Therefore, particle size and type of carbon support can be considered as playing crucial roles in defining the catalytic activity of gold nanocatalysts which were used for benzyl alcohol oxidation.

The diverse field of material research has been steadily expanding with a great help from computational physics, especially in the investigation of the fundamental properties of materials. This has driven the computational physics to become one of the main branches of physics, allowing for density functional theory (DFT) to develop as one of the cornerstones of material research. Nowdays, DFT is the method of choice in a great variety of studies, from fundamental properties, to materials modelling and searching for new materials. In this thesis, DFT is employed for the study of a small part of this vast pool of applications. Specifically, the microscopic characteristics of Zn1-xCdxS alloys are studied by looking into the evolution of the local structure. In addition, the way to model the growth of graphene on Fe(110) surface is discussed. The structural stability of silicon nanocrystals with various shapes is analysed in detail, as well. DFT is further used in studying different properties of semiconductor nanocrystals. The size evolution of the character of the band gap in silicon nanocrystals is investigated in terms of changes in the character of the states around the band gap. The influence of various surface impurities on the band gap, as well as on the electronic and optical properties of silicon nanocrystals is further studied. In addition, the future use of silicon nanocrystals in photovoltaic devices is examined by studying the band alignment and the charge densities of silicon nanocrystals embedded in a silicon carbide matrix. Furthermore, the electronic and optical properties of different semiconductor nanocrystals is also investigated. In the case of the CdSe/CdS and CdS/ZnS core-shell nanocrystals the influence of the nanocrystal size and different structural models on their properties is analysed. For silicon nanocrystal capped with organic ligands, the changes in the optical properties and lifetimes is thoroughly examined with changes in the type of organic ligand.

Zirconium- and tantalum-based diborides, and diboride/carbide composites are of interest for ultra-high temperature applications requiring improved thermomechanical and thermochemical stability. This thesis focuses on the synthesis, processing and sintering of nanocrystalline powders with Zr- and Ta-based diboride/carbide/silicide compositions. A solution-based processing method was developed to prepare reactive mixtures that were precursors for ZrB₂-based powders. The precursors reacted to form the ceramic powders after suitable pyrolysis and borothermal/carbothermal reduction heat treatments. Single-phase ZrB₂ powders were prepared with initial composition of C/Zr = 4.8 and B/Zr = 3.0. ZrB₂-based composite powders with ZrC, ZrO₂, TaB₂, TaC, SiC, TaSi₂ and B₄C were prepared with particle sizes of 10-500 nm for different phases based SEM micrographs. The composite powders were highly sinterable with proper processing methods developed to avoid and remove oxide impurities. The relative densities of ZrB₂/B₄C, ZrB₂/TaB₂, ZrB₂/TaB₂/B4C, ZrB₂/TaSi₂ were in the range of 91%-97% after pressureless sintering at 2020 ℃ for 1 h or 30 min.

Driven by the need for increase in system¡¯s functionality and decrease in the feature size, International Technology Roadmap for Semi-conductors has predicted that integrated chip packages will have interconnections with I/O pitch of 90 nm by the year 2018. Lead-based solder materials that have been used for many decades will not be able to satisfy the thermal mechanical requirements of these fines pitch packages. Of all the known interconnect technologies, nanostructured copper interconnects are the most promising for meeting the high performance requirements of next generation devices. However, there is a need to understand their material properties, deformation mechanisms and microstructural stability. The goal of this research is to study the mechanical strength and fatigue behavior of nanocrystalline copper using atomistic simulations and to evaluate their performance as nanostructured interconnect materials. The results from the crack growth analysis indicate that nanocrystalline copper is a suitable candidate for ultra-fine pitch interconnects applications. This study has also predicts that crack growth is a relatively small portion of the total fatigue life of interconnects under LCF conditions. The simulations result conducted on the single crystal copper nano-rods show that its main deformation mechanism is the nucleation of dislocations. In the case of nanocrystalline copper, material properties such as elastic modulus and yield strength have been found to be dependent on the grain size. Furthermore, it has been shown that there is competition between the dislocation activity and grain boundary sliding as the main deformation mode This research has shown that stress induced grain coarsening is the main reason for loss of mechanical performance of nanocrystalline copper during cyclic loading. Further, the simulation results have also shown that grain growth during fatigue loading is assisted by the dislocation activity and grain boundary migration. A fatigue model for nanostructured interconnects has been developed in this research using the above observations Lastly, simulations results have shown that addition of the antimony into nanocrystalline copper will not only increase the microstructure stability, it will also increase its strength.

Thesis (M. S. in Interdisciplinary Materials Science)--Vanderbilt University, Aug. 2008. / Title from title screen. Includes bibliographical references.

No description available.

Contrairement à leurs homologues animales, les cellules végétales sont entourées d’une fine enveloppe de polysaccharides appelée paroi primaire, dont la principale structure portante est un réseau de microfibrilles de cellulose reliées entre elles par des hémicelluloses. L’objectif de ce travail est de mettre au point des capsules biomimétiques de la paroi végétale qui puissent servir de système modèle dans l’étude des propriétés mécaniques de ce matériau naturel. Pour ce faire, des vésicules géantes unilamellaires d’un diamètre moyen de 20 µm ont été utilisées comme support de dépôts couche-par-couche de nanocristaux de cellulose (les sous-éléments des microfibrilles) et de xyloglucane (l’hémicellulose la plus répandue) jusqu’à une dizaine de bicouches, les capsules ainsi obtenues ayant été caractérisées par microscopie confocale. Leur comportement en déformation en réponse à une pression osmotique a pu être observé : leur dégonflement a donné lieu à l’apparition de diverses morphologies dont certaines sont similaires aux formes de coques minces de matériau isotrope dégonflées, tandis que leur comportement en gonflement est comparable à la réponse d’un matériau viscoélastique. Enfin, des expériences de nano-indentation par microscopie à force atomique ont été effectuées pour mesurer la rigidité de la paroi des capsules. Leur module d’Young a pu être déduit des courbes de force-déformation et s’avère être compris entre 6 et 18 MPa, ce qui est du même ordre de grandeur que les valeurs obtenues par des mesures similaires effectuées sur des parois végétales naturelles. / Unlike their animal counterparts, plant cells are surrounded by a thin polysaccharide-rich envelop called the primary wall, in which the main load-bearing structure is a network of cellulose microfibrils tethered by hemicellulose. This work aims at designing plant cell wall mimicking capsules that could be used as a model system in the mechanical characterization of this natural material. To do so, we used giant unilamellar vesicles with an average diameter of 20 µm as a template for the layer-by-layer deposition of cellulose nanocrystals (the microfibrils sub-elements) and xyloglucan (the most common hemicellulose) up to ten bilayers, the resulting capsules being characterized by confocal microscopy. Their deformation behaviour under osmotic stress could be observed : deflation of the capsules led to various morphologies, some of them similar to what is observed for thin deflated shells of isotropic material, while their response to swelling resembled that of a viscoelastic material. Nano-indentation experiments were eventually performed using an atomic force microscope to probe the stiffness of the capsules wall. Their Young’s modulus could be deduced from the force-depth curves and found to be in the 6-18 MPa range, which is in the same order of magnitude of values obtained with similar measurements done on natural plant cell walls.

Doctor of Philosophy / Department of Chemistry / Emily McLaurin / Semiconductors are materials whose conductivity is between metals and insulators. Semiconductor nanocrystals (NCs) have sizes in the range 2 to 10 nm. Because of their unique optical properties like tunable emission wavelength, narrow emission peak, and stability over dyes, they have potential applications in displays. Indium phosphide (InP) is considered a less toxic alternative to commercially used cadmium-based semiconductor NCs. Microwave-assisted (MA) methods using ionic liquids (ILs) afford fast reaction heating rates because of the good MW absorbing capacity of ILs. For tuning size and surface, which are some of the important problems associated with the InP NCs, new synthetic methods are reported herein. In MAIL etching HF generated in the microwave reaction etches the InP NCs surface. Pyridinium and imidazolium based ILs containing tetrafluoroborate (BF₄⁻) and hexafluorophosphate (PF₆⁻) ions yield luminescent NCs. In a silicon carbide (SiC) reaction vessel, which blocks most of the microwaves penetrating into the reaction, bigger NCs form than those from a Pyrex reaction vessel because of the higher reaction temperatures in the SiC vessel. By changing microwave set-power (SP), different reaction times can be achieved. Though a small degree of change in average NC diameter of the NCs is observed at different SPs and reaction temperatures, addition of dodecylamine (DDA) yields NCs with average sizes between 3.2 to 4.2 nm with a broad size distribution. At lower SPs smaller NCs form and at higher SPs bigger NCs form. NC luminescence can be tuned from green (545 nm) to red (630 nm) in the visible region with quantum yields as high as 30%. Rapid heating and InP precursor activation might be responsible for the larger change in NC size. The effect of DDA on NC size is also verified by microwave reactions in SiC vessels. ILs containing PF₆⁻ ions at 280 °C will modify the surface of the NCs so the NC dispersibility changes from non-polar (toluene) to polar (DMSO) as the amount of IL increases. This is due to ligand stripping, which is the removal of large palmitic ligands from the NC surface. These NCs have broad absorption features and emission peaks with QYs of up to 30%. Fourier transform infrared spectroscopy indicates the absence of palmitic acid ligands on the NC surface and zeta potential measurements indicate the presence of anions on the NC surface. From X-ray photoelectron spectroscopy and nuclear magnetic resonance spectroscopy, the inorganic ion PO₂F₂⁻ is identified on the NCs surface.

L’originalité de ce projet consiste au développement et à l’étude de nouvelles structures hybrides à base de nanocelluloses et de polymères stimulables. En particulier, c’est le design d’hydrogels aux propriétés thermosensibles qui est visé. Les nanocelluloses - nanoparticules issues de la cellulose - sont de deux types : les nanocristaux de cellulose (CNCs) et les nanofibrilles de cellulose (CNFs) et possèdent des propriétés bien particulières. Cette étude s’est concentrée sur l’élaboration d’hydrogels de CNCs. Plusieurs polymères thermosensibles ont été utilisés pour leur biocompatibilité et leur température de solution critique (LCST) aux abords de la température du corps humain. Ce travail a consisté en (i) la préparation des systèmes sur les principes de la chimie verte, (ii) l’étude rhéologique de ces gels thermosensibles et (iii) l’élaboration d’applications à forte valeur ajoutée pour ces biomatériaux uniques. A travers l’utilisation de grands équipements (SANS, SAXS), les interactions physico-chimiques CNCs/polymères ont été étudiées. L’utilisation de block copolymères a permis l’obtention de suspension de CNCs aux propriétés rhéologiques spécifiques : de liquide a température ambiante à gel viscoélastique à température du corps. D’un point vue applicatif, les hydrogels ainsi réalisés ont permis le déploiement de systèmes injectables pour le biomédical ainsi que des surfaces thermosensibles.Mots clés : nanocristaux de cellulose, hydrogel, thermosensible, stimulable / This project consists to develop and study new hybrid structures based on nanocelluloses and stimuli-responsive polymers, in particular, thermo-responsive polymers. Nanocelluloses - nanoparticles extracted from cellulose - exist in two forms: cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs). This study focused on the design of CNCs hydrogels with stimuli-responsive polymers. Several thermo-responsive polymers have been used for their biocompatibility and lower critical solution temperature (LCST) close to body temperature. This work consisted of (i) preparation of systems using the principles of green chemistry, (ii) the rheological study of these thermo-sensitive hydrogels, and (iii) the development of smart applications for these unique biomaterials. Through the use of state of the art technologies (SANS, SAXS), physicochemical interactions between the polymers and CNCs have been studied. The use of block copolymers made it possible to create CNCs-based hydrogels with specific rheological properties: liquid at ambient temperature to viscoelastic gel at body temperature. These hydrogels can be used in the creation of injectable systems for biomedical applications, as well as thermosensitive surfaces.Key-words: Cellulose nanocrystals, hydrogel, thermo-responsive, stimuli-responsive

This thesis is about new ways to experimentally realise materials with desired nano-structures for solution-processable optoelectronic devices such as solar cells and light-emitting diodes (LEDs), and examine structure-performance relationships in these devices. Short exciton diffusion length limits the efficiency of most exciton-based solar cells. By introducing nano-structured architectures to solar cells, excitons can be separated more effectively, leading to an enhancement of the cell’s power conversion efficiency. We use diblock copolymer lithography combined with solvent-vapour-assisted imprinting to fabricate nano-structures with 20-80 nm feature sizes. We demonstrate nanostructured solar cell incorporating the high-performance polymer PBDTTT-CT. Furthermore, we demonstrated the patterning of singlet fission materials, including a TIPS-pentacene solar cell based on ZnO nanopillars. Recently perovskites have emerged as a promising semiconductor for optoelectronic applications. We demonstrate a perovskite light-emitting diode that employs perovskite nanoparticles embedded in a dielectric polymer matrix as the emissive layer. The emissive layer is spin-coated from perovskite precursor/polymer blend solution. The resultant polymer-perovskite composites effectively block shunt pathways within the LED, thus leading to an external quantum efficiency of 1.2%, one order of magnitude higher than previous reports. We demonstrate formations of stably emissive perovskite nanoparticles in an alumina nanoparticle matrix. These nanoparticles have much higher photoluminescence quantum efficiency (25%) than bulk perovskite and the emission is found to be stable over several months. Finally, we demonstrate a new vapour-phase crosslinking method to construct full-colour perovskite nanocrystal LEDs. With detailed structural and compositional analysis we are able to pinpoint the aluminium-based crosslinker that resides between the nanocrystals, which enables remarkably high EQE of 5.7% in CsPbI3 LEDs.