Studies on perovskite rare earth manganites of general formula R1-xAxMnO3 (where R is a trivalent rare earth ion such as La3+, Pr3+ etc. and A is a divalent alkaline earth ion such as Ca2+, Sr2+, Ba2+, have been a very active research area in the last few years in condensed matter physics. Manganites have a distorted perovskite crystal structure with R and A ions situated at the cube corners, oxygen ions at the edge centers of the cube and Mn ions at the centres of the oxygen octahedra. In these manganites the Mn ions are found to be in mixed valence state i.e., in Mn3+ and Mn4+ states. In the octahedral crystal field of oxygen ions the single ion energy levels are split into t2g and eg levels. Mn3+ being a Jahn-Teller ion, the eg level is further split due to the Jahn-Teller effect. A strong Hund’s coupling between the spins in the t2g and eg levels renders the Mn3+ ions to be in the high spin state. The interplay of competing super exchange between Mn ions which determines the antiferromagnetism, orbital ordering and insulating behavior and double exchange between Mn ions which leads to ferromagnetism and metallicity gives rise to very complex phase diagrams of manganites as a function of composition, temperature and magnetic field. The strength of these interactions is determined by various factors such as the A-site cation radius and the Jahn-Teller distortion due to the presence of Mn3+ ions. The strongly coupled charge, spin, lattice and orbital degrees of freedom in manganites gives rise to complex phenomena such as colossal magnetoresistance (CMR), charge order (CO) and orbital order (OO) and phase separation (PS) etc. The properties of these materials are sensitive functions of external stimuli such as the doping, temperature and pressure [1-5] and have been extensively studied both experimentally and theoretically in single crystal, bulk polycrystalline and thin film forms of the samples [6-9]. Charge ordering is one of the fascinating properties exhibited by manganites. Charge ordering has historically been viewed as a precursor to the complex ordering of the Mn 3d orbitals, which in turn determine the magnetic interactions and these magnetic interactions are the driving force for charge localization and orbital order. This ordering of Mn3+ / Mn4+ charges can be destabilized by many methods. An external magnetic field can destabilize the charge ordered phase and drive the phase transition to the ferromagnetic metallic state [10-11]. Other than magnetic field, charge ordering can also be ‘melted’ by a variety of perturbations like electric field [12, 13], hydrostatic and chemical pressure [14-16], irradiation by X-rays [17], substitution at the Mn -site [18 -21] and A-site [22]. Of these, A-site substitution with bigger cations like barium is particularly of great interest since it does not interrupt the conduction path in the “MnO3” frame work Recently attention has been drawn towards the properties of nanoscale manganites. The nanoscale materials are expected to behave quite differently from extended solids due to quantum confinement effects and high surface/volume ratio. Nanoscale CMR manganites have been fabricated using diverse methods in the form of particles, wires, tubes and various other forms by different groups. It has been shown that the properties of CMR manganites can be tuned by reducing the particle size down to nanometer range and by changing the morphology [23-27]. As mentioned above, charge order is an interesting phase of manganites and these CO mangnites in the form of nanowires and nanoparticles show drastic changes in their properties compared to bulk. In contrast to the studies on the CMR compounds, there are very few reports on charge ordering nano manganites except on nanowires of Pr0.5Ca0..5MnO3 [28] and nanoparticles of Nd0.5Ca0.5MnO3 [29] and Pr0.5Sr0..5MnO3 [30]. This thesis is an effort in understanding certain aspects of charge order destabilization by two different methods, namely, doping bigger size cation (barium) in A-site (external perturbation) and by reducing the particle size to nano scale ( intrinsic). For this purpose we have selected the charge ordering system Pr1-xCaxMnO3 (PCMO) with composition x = 0.43. The reason behind choosing this composition is the observation [31] that CO is particularly weak for this value of x. We have prepared bulk, nanoparticles and nanowires of Pr0.57Ca0.41Ba0.02MnO3 manganite and have carried out microstructure, magnetic, magneto transport and EMR measurements to understand the nature of CO destabilization and also to understand other aspects such as magneto transport and magnetic anisotropy . Apart from destabilization of the charge order in PCMO we have also studied the bismuth based manganite Bi0.5Ca0.5MnO3. The reason behind choosing this system is the robust charge order of Bi0.5Ca0.5MnO3 compared to rare earth based manganites. So far no attempt has been made in comparing the electron paramagnetic resonance properties of bismuth based manganites with those of the rare earth based manganites. We have studied the magnetic, transport and electron paramagnetic resonance properties of Bi0.5Ca0.5MnO3 prepared by solid state reaction method and compared the results with those of Pr0.5Ca0.5MnO3 . In the following we present a chapter wise summary of the thesis. Chapter 1 of the thesis contains a brief introduction to the general features of manganites describing various interesting phenomena exhibited by them and the underlying interactions . Chapter 2 contains a detailed review of EPR studies on manganites describing the current level of understanding in the area. In this chapter we have also described the different experimental methodology adopted in this thesis. Chapter 3 reports the effect of a small amount (2%) of barium doped in the charge ordered antiferromagnetic insulating manganite Pr0.57Ca0.43MnO3. The samples were prepared by solid state synthesis and charecterized by various techniques like XRD, EDXA. The results of magnetization, magnetotransport and EPR/EMR experiments on both Pr0.57Ca0.43MnO3 and Pr0.57Ca0.41Ba0.02MnO3 are compared. The magnetization studies show that barium doping induces ferromagnetic phase in place of the CO-antiferromagnetic phase of the pristine sample at low temperatures as reported earlier by Zhu et al.,[31]. The transport studies show insulator to metal transition. The EPR parameters viz line width, intensity and ‘g’ value of Pr0.57Ca0.43MnO3 and Pr0.57Ca0.41Ba0.02MnO3 are compared. The magnetization and EPR studies reveal that the CO transition temperature TCO has shifted to a slightly lower value accompanied by a small decrease in the strength of the charge order. Thus a small amount of barium affects the CO phase of Pr0.57Ca0.43MnO3 and it also induces a ferromagnetic metallic phase at low temperature. Another most important and unexpected result of EMR experiment is the observation of high field signals, i.e. two EMR signals are observed at low temperatures in the ferromagnetic phase of Pr0.57Ca0.41Ba0.02MnO3. The appearance of the high field signals are understood in terms of the effects of magneto crystalline anisotropy. Chapter 4, reports the microstructure, magnetization and EMR studies of Pr0.57Ca0.41Ba0.02MnO3 nanoparticles prepared by sol-gel method. We have mainly focused on the effect of size on the charge ordered phase. The samples were characterized by different techniques like XRD, EDXA and TEM. The obtained particle size of the samples are 30, 60 and 100 nm respectively. We have compared the magnetic, magneto transport and EMR results of these nano samples with the bulk properties. The 30 nm particles do not show the CO phase whereas the 60 and 100 nm particles show CO signatures in DC- magnetization measurements. The EPR intensity also shows a similar trend. These results confirm that charge ordering can also be destabilized by reducing the particle size to nano scale. But the EPR linewidth which reflects the spin dynamics shows a change in the slope near the CO temperature and there by indicates the presence of premonitory charge ordering fluctuations in smaller particles. We also observed that the EMR linewidth increases with the decrease of particle size. Another striking result is the disappearance of high field signals in all the nanosamples. This is understood in terms of a decrease in the magnetic anisotropy in nanoparticles. Part of the result of this chapter is published [32]. Chapter 5, reports the morphological, magnetic and electron paramagnetic resonance studies of Pr0.57Ca0.41Ba0.02MnO3 nanowires. Recently our group has studied the nanowires of Pr0.5Ca0..5MnO3 [28]. In the nanowire sample of Pr0.5Ca0..5MnO3 only a partial suppression of CO is observed. This raises the question about the incomplete suppression of the CO in the nanowires: is this a consequence of the material being microscopic in one dimension and is it necessary to have a 3-dimensional nano material to have full suppression of the charge order ? In the present work we attempt to provide an answer to this question. PCBM nanowires of diameter 80-90 nm and length of ∼ 3.5 μm were synthesized by a low reaction temperature hydrothermal method. We have confirmed the single phase nature of the sample by XRD experiments. Scanning electron microscopy (SEM) and trasmission electron microscopy (TEM) were used to characterize the morphology and microstructures of the nanowires. The surface of nanowires was composed of particles of different grain size and interestingly some particles were hexagonal in shape. The bulk PCBM manganite exhibits charge order at 230 K along with a ferromagnetic transition at 110 K. However, SQUID measurements on PCBM nano-wires show a complete melting of the charge ordering and a ferromagnetic transition at 115 K. The magnetization observed in the nanowires was less compared to that in the bulk. EPR intensity measurements also support this result. Characteristic differences were observed in linewidth and ‘g’ factor behaviors of nanowires when compared with those of the bulk. EPR linewidth which reflects the spin dynamics shows a slope change near the CO temperature (like in nanoparticles) possibly due to charge order fluctuations in nanowires. The high field signals were absent in nanowires as well. Part of the result of this chapter is published [33]. Chapter 6 deals with the magnetic and electron paramagnetic resonance studies on Pr0.5Ca0.5MnO3 and Bi0.5Ca0.5MnO3. These manganites are prepared by solid state reaction method and characterized by different techniques like XRD and EDXA. Further, we have compared the results of magnetization and electron paramagnetic resonance properties of Pr0.5Ca0.5MnO3 with those of Bi0.5Ca0.5MnO3 manganite in the temperature range of 10- 300 K. The two charge ordered manganites show significant differences in their behavior. The temperature dependence of the EPR parameters i.e. line width, central field and intensity of Bi0.5Ca0.5MnO3 are quite different from the rare earth based manganite i.e. Pr0.5Ca0.5MnO3. Linewidth of BCMO is large compared to PCMO manganite and interestingly the temperature dependence of the central fields (CF) of PCMO and BCMO show opposite behavior. The CF of PCMO decreases with decrease in temperature as found in a large number of other CO systems, whereas CF of BCMO increases with decrease in temperature. This unusual behavior of resonance field is attributed to the different magnetic structure of BCMO system at low temperatures. Chapter 7 sums up the results reported in the thesis. The insight gained from the present work in understanding the destabilization of charge order by chemical doping and size reduction is discussed as well as the differences in the properties of bismuth and rare earth manganites. Further, we have indicated possible future directions of research in this area.

Perovskite rare-earth manganites of the form R1-xAxMnO3 (R – rare earth ion or Bi, A – Ca,Sr) have drawn an overwhelming research interest during the last few years owing to their extraordinary physical properties. Some of the interesting phenomena exhibited by the manganites are (a) colossal magneotresistance (CMR) (b) charge, orbital and spin ordering and (c) phase separation at nano and micron scale. The manganites are strongly correlated systems in which the charge, spin and orbital degrees of freedom are coupled. The properties of these materials are sensitive functions of external stimuli such as the doping, temperature and pressure [1-5] and have been extensively studied both experimentally and theoretically on single crystal, bulk polycrystalline and thin film forms of the samples [6-9]. Recently attention has been drawn towards the properties of nanoscale manganites. The nanoscale materials are expected to behave quite differently from extended solids due to quantum confinement effects and high surface/volume ratio. Nanoscale CMR manganites have been fabricated using diverse methods in the form of particles, wires, tubes and various other forms by different groups. It has been shown that the properties of CMR manganites can be tuned by reducing the particle size down to nanometer range and by changing the morphology [10-14]. The physical properties of antiferromagnetic insulating charge ordered manganites have been well investigated by using numerous experimental techniques on bulk solids. It is known that the charge ordered (CO) phase is ‘melted’ resulting in a ferromagnetic, metallic phase on application of high magnetic fields, electric fields, impurity ion doping, high energetic ion irradiation and by pressure [15-17]. However, no attempts have been made on the fabrication and the physical property investigations on nanoscale charge ordered manganites. Hence, we have undertaken to study the properties of charge ordered manganites prepared at nanoscale using various experimental probes. In this thesis we present the results on magnetization, magnetotransport and Electron Magnetic Resonance (EMR) (electron paramagnetic resonance in the paramagnetic phase and ferromagnetic resonance in the ferromagnetic phase) studies of the following nanoscale compounds and compare the properties with those of their bulk counterparts; (a) highly robust antiferromagnetic insulating CE –type charge ordered manganite Pr0.5Ca0.5MnO3 (PCMO) (b) highly robust antiferromagnetic insulating CE- type charge ordered manganite Nd0.5Ca0.5MnO3 (NCMO) (c) moderately robust A-type charge ordered manganite Pr0.5Sr0.5MnO3 (PSMO) (d) highly robust insulating anti-ferromagnetic charge ordered manganites Bi0.5Ca0.5MnO3 (BCMO) and Bi0.5Sr0.5MnO3 (BSMO) and (e) a CMR manganite Pr0.7Pb0.3MnO3 (PPMO). Chapter 1 of the thesis contains a brief introduction to the general features of manganites describing various interesting phenomena and the interactions underlying them. Further, we have written a detailed review on the properties of nanometric CMR manganites of various sizes and shapes. In this chapter, we have also described the experimental methodology and the analysis procedure adopted in this work Chapter 2 reports the fabrication of nanowires and nanoparticles of Pr0.5Ca0.5MnO3 (PCMO) and the results obtained from magnetization, magnetotransport and electron magnetic resonance measurements performed on nanoscale PCMO along with their comparison with those of the bulk sample. Here, the nanowires of PCMO were prepared by hydrothermal method and the nanoparticles of mean sizes 10, 20 and 40 nm were prepared by polymer assisted sol-gel method. Solid state reaction method was used to prepare the micron sized PCMO bulk material. Different techniques like XRD, TEM, EDAX and ICPAES have been used to characterize the samples. The novel result of the present investigation is the weakening of charge order and switch over from the anti-ferromagnetic phase to ferromagnetic phase in PCMO nanowires [18]. In addition, the charge order is seem to have completely suppressed in 10 nm PCMO nanoparticles as observed from the magnetization measurements. These results are particularly very significant as one needs magnetic fields of ~ 27 T to melt the charge ordered phase in PCMO. Size induced insulator-metal transition TM-I is observed in nanoscale PCMO at low temperatures accompanied by ferromagnetism. CMR of 99.7% is obtained at TM-I and at a field of 11 T. EMR studies have confirmed the presence of ferromagnetic phase at low temperatures. Temperature dependent EMR line width and intensity have shown the presence of CO phase in PCMO10 though static magnetization measurements have shown the absence of CO phase. It is found that the EMR linewidth increases with the decrease of particle size. Chapter 3 reports the fabrication of nanoparticles of Nd0.5Ca0.5MnO3 (NCMO) and the results obtained from magnetization, magnetotransport and electron magnetic resonance measurements performed on nanoscale NCMO along with their comparison with those of bulk NCMO. The nanoparticles of NCMO of mean sizes 5, 20 and 40 nm were prepared by polymer assisted sol-gel method. Solid state reaction method was used to prepare the micron sized NCMO bulk material. Different techniques like XRD, TEM, EDAX and ICPAES have been used to characterize the samples. A striking result of this particular investigation is the complete suppression of charge ordered phase in 5 and 20 nm NCMO nanoparticles as observed from the magnetization measurements [19]. Size induced insulator-metal transition TM-I is observed in nanoscale NCMO at low temperatures accompanied by ferromagnetism in accordance with Zener double exchange meachanism. CMR of 99.7% is obtained at TM-I and at a field of 11 T. EMR studies have confirmed the presence of ferromagnetic phase at low temperatures. Temperature dependent EMR line width and intensity have shown the presence of residual CO fluctuations in NCMO5 though the static magnetization measurements have shown the absence of CO phase. It is found that the EMR linewidth increases with the decrease of particle size. Low temperature X-ray diffraction measurements on NCMO20 indicate the absence of CO phase. But the preliminary results obtained from the optical spectroscopy measurements indicate the evidence for the presence of CO phase. In Chapter 4, we report the investigations on the nanoscale PSMO. PSMO nanoparticles of sizes 20, 40 and 60 nm are prepared by polymer precursor sol-gel method. PSMO nanowires of diameter 50 nm and lengths of a few microns have been prepared by hydrothermal method. The bulk polycrystalline PSMO is obtained by crushing the single crystal of the same prepared by float zone method. Various techniques like XRD, TEM, VSM, transport measurements and EMR spectroscopy have been employed to characterize and to study the size dependent magnetic, transport and electron magnetic resonance properties and to compare them with those of the bulk. Our results show that there is a disappearance of anti-ferromagnetic charge ordering phase and the appearance of a ferromagnetic phase at low temperatures in all PSMO nanoparticles and nanowires. Metal like behaviour is observed in the size induced ferromagnetic phase in nanoparticles. The EMR linewidth increases with the decrease of particle size. A comparison with the properties of the bulk material shows that the ferromagnetic transition at 265 K remains unaffected but the anti-ferromagnetic transition at TN = 150 K disappears in the nanoparticles. Further, the temperature dependence of magnetic anisotropy shows a complex behaviour, being higher in the nanoparticles at high temperatures, lower at lower temperatures in comparison with the bulk [20]. In Chapter 5, we present the fabrication, characterization and the results obtained from the magnetization and EMR measurements carried out on BCMO and BSMO nanoparticles and compare the results with those of the bulk. X-ray diffraction gives evidence for single phasic nature of the materials as well as their structures. Mono-dispersed to a large extent, isolated nanoparticles are seen in the transmission electron micrographs. High resolution electron microscopy shows the crystalline nature of the nanoparticles. Superconducting quantum interferometer based magnetic measurements from 10 K to 300 K show that these nanomanganites retain the charge ordering nature unlike the Pr and Nd based nanomanganites. The CO in Bi based manganites is thus found to be very robust consistent with the observation that magnetic fields of the order of 130 T are necessary to melt the CO in these compounds. These results are supported by electron magnetic resonance measurements [21]. In Chapter 6, we present our results on the effect of particle size on the magnetic properties of Pr0.7Pb0.3MnO3 (PPMO). PPMO nanoparticles of two different sizes (~5 nm and 30 nm) were prepared by the polymeric precursor sol-gel method. The samples are characterized by different techniques like XRD, TEM, SQUID magnetometry, EMR and optical spectroscopic measurements. It is found that the nanoparticles crystallize in the cubic perovskite structure. TEM measurements show that the 5 nm particles are uniform in size. They are also crystalline as seen by HREM and XRD measurements. SQUID magnetometry measurements have shown that the Curie temperature increases (from 220 K to 235 K) with the increase of particle size. Saturation magnetization is higher for the smaller particles studied. We have observed only one EMR signal down to 4 K in both the nanoparticles (5 and 30 nm) in contrast to the two EMR signal behaviour observed in bulk PPMO [22]. It is found that the EMR linewidth increases with the decrease of particle size in the paramagnetic phase. Temperature dependent optical spectroscopy measurements performed on 5 nm PPMO nanoparticles indicate that the insulator-metal transition temperature TM-I = 230 K, is not very different from TM-I = 235 K of the bulk sample [23] The thesis concludes with a brief writeup summarizing the results and pointing out possible future directions of research in the area.