L’observation d’échantillons biologiques à une échelle nanométrique est actuellement un thème majeur pour la biologie. En particulier, la microscopie à rayons X dans la fenêtre de l’eau (entre les seuils d’absorption K-alpha de l’oxygène et du carbone, soit entre 2,4 et 4,4 nm de longueur d’onde) présente un intérêt remarquable car elle permet à la fois l’observation d’échantillons biologiques avec un fort contraste d’absorption naturel, mais également une haute résolution grâce à la courte longueur d’onde d’utilisation. Plusieurs microscopes basés sur des composants diffractifs ont d’ores et déjà été développés et ont montré une résolution allant jusqu’à 12 nm. Dans ce contexte, nous développons au Laboratoire Charles Fabry un microscope X plein champ à miroirs en incidence proche de la normale. Le schéma optique du microscope a dans un premier temps été étudié et optimisé. Il est basé sur un objectif de Schwarzschild, et dispose donc d’une longue distance de travail ce qui permettra de faciliter l’installation de l’échantillon à observer. Les miroirs doivent être traités avec un revêtement multicouche à très faible période à base de chrome et de scandium. Plusieurs systèmes multicouches à couches sub nanométrique ont été étudiés pour maximiser la réflectivité des revêtements à une longueur d’onde proche de 3,14 nm, parmi lesquels : Cr/Sc, Cr/B4C/Sc, CrN/Sc et CrN/B4C/Sc. Une réflectivité pic de plus de 23% a été mesurée pour un revêtement multicouche CrN/B4C/Sc à un angle d’incidence inférieur à 5°. / The observation of biological samples at a nanometer scale is currently a major topic for biology. In particular, X-ray microscopy in the water-window (between Oxygen and Carbon K-alpha edges, corresponding to a wavelength between 2.4 and 4.4 nm) is off remarkable interest since it enables the visualization of biological samples with a natural high absorption contrast and a high resolution thanks to the short working wavelength. Several such x-ray microscopes have already been developed and showed resolutions down to 12 nm. In this context, we develop at Laboratoire Charles Fabry a full field, near normal incidence mirror based X-ray microscope. The optical design of the microscope was studied and optimized in a first place. It is based on a Schwarzschild objective, with a rather long working distance so that the installation of the sample will be facilitated. The mirrors are to be coated with very short period multilayer coatings containing chromium and scandium. Several multilayer systems with sub-nanometer thick layers ere studied in order to obtain the highest reflectance possible near normal incidence at a wavelength near 3.14 nm. Those systems were Cr/Sc, Cr/B4C/Sc, CrN/Sc and CrN/B4C/Sc. A peak reflectance of 23% has been measured for CrN/B4C/Sc at an incidence angle lower than 5°.

O propósito deste trabalho tem sido a utilização das técnicas de Desenho Óptico para o desenvolvimento de sistemas ópticos altamente otimizados. Após a confeccção destes sistemas ópticos torna-se necessário avaliar o desempenho do sistema construído, para isto tem sido utilizado uma das técnicas mais modernas para avaliação de qualidade da imagem óptica, a função de transferência óptica FTO, mais especificamente a função de transferência de modulação FTM. FTM representa o módulo da função complexa FTO e está associada à medida direta e quantitativa da qualidade de imagem, descrevendo a estrutura da imagem como uma função da freqüência espacial. Estas duas técnicas são as ferramentas fundamentais para os desenhistas ópticos. Instrumentos oftálmicos como o microscópio cirúrgico, sistema óptico para adaptação de uma câmera CCD e a lâmpada de fenda são desenvolvidos e analisados por estas técnicas neste trabalho. / The purpose of this work has been the use of design optical techniques to development of highly optimized optical systems. After the fabrication of these systems, it is necessary to evaluate the performance of building systems. A modern technique used to evaluate the quality of optical image is the optical transfer function OTF, more exactly the modulation transfer function MTF. MTF is the modulus of the complex function OTF. MTF is associated the direct and quantitative measure of the image quality and it describes the image structure as a function of spatial frequency. This bides techniques are the tools of optical designers. Ophthalmic instruments like surgery microscope, optical system of CCD camera adaptation and slit lamps are developed and analyzed for this techniques in this work.

O propósito deste trabalho tem sido a utilização das técnicas de Desenho Óptico para o desenvolvimento de sistemas ópticos altamente otimizados. Após a confeccção destes sistemas ópticos torna-se necessário avaliar o desempenho do sistema construído, para isto tem sido utilizado uma das técnicas mais modernas para avaliação de qualidade da imagem óptica, a função de transferência óptica FTO, mais especificamente a função de transferência de modulação FTM. FTM representa o módulo da função complexa FTO e está associada à medida direta e quantitativa da qualidade de imagem, descrevendo a estrutura da imagem como uma função da freqüência espacial. Estas duas técnicas são as ferramentas fundamentais para os desenhistas ópticos. Instrumentos oftálmicos como o microscópio cirúrgico, sistema óptico para adaptação de uma câmera CCD e a lâmpada de fenda são desenvolvidos e analisados por estas técnicas neste trabalho. / The purpose of this work has been the use of design optical techniques to development of highly optimized optical systems. After the fabrication of these systems, it is necessary to evaluate the performance of building systems. A modern technique used to evaluate the quality of optical image is the optical transfer function OTF, more exactly the modulation transfer function MTF. MTF is the modulus of the complex function OTF. MTF is associated the direct and quantitative measure of the image quality and it describes the image structure as a function of spatial frequency. This bides techniques are the tools of optical designers. Ophthalmic instruments like surgery microscope, optical system of CCD camera adaptation and slit lamps are developed and analyzed for this techniques in this work.

The main tasks of the thesis lie in summary of present state in Human Centric Lighting field, in the optical design of luminaire and in practical verification of the proposal. The design is developed in software LightTools and for the verification of functionality the software Dialux EVO is employed. The luminaire is designed primarily with respect to the influence of light on the man and the physiological, psychological and behavioural responses in humans. The thesis is created in cooperation with the company Robe Lighting s.r.o. The proposal of the luminaire corresponds to the current state of knowledge in the area of light influence on humans. The designed luminaire in the trend HCL is distinguished by the high quality of emitted light but also with higher costs of the operation.

Measurement of absorption spectra of plasma during reactive ion etching enables characterization of etched species and control over the etching process. Aim of this diploma thesis is to design spectroscope with Czerny-Turner configuration for reactive ion etching system. Developed spectroscope achieves 1 nm resolution in 350-800 nm range. Device was tested during reactive ion etching of silicon.

This diploma thesis describes the design of the illumination system for a Coherence--Controlled Holographic Microscope (CCHM). The theoretical part mentions the history of microscopy, the principle of holography and individual types of interference microscopy. To get closer to the topic, individual light sources and an overview of current illumination systems are mentioned. The diploma thesis also describes the procedure of designing a fiber-optic illumination module for microscopy from optical design through design of construction to the last step, which is assembly and testing of the module.

The thesis deals with the design and optimization of varifocal lens for projection illuminating purposes, its mechanical design and manufacturing drawings. It was proceed in the cooperation with Robe Lighting s.r.o., which defined requirement for a new projective objective lens. Lighting fixtures development is a very specific industry with a number of unusual conditions for design and methods of using of the optical systems. In this paper conditions for imaging quality will be defined and a new design of the lens with corrected distortion will be created based on the definition of the conditions.

Traditional methods in optical design like ray tracing suffer from slow convergence and are not constructive, i.e., each minimal perturbation of input parameters might lead to “chaotic” changes in the output. However, so-called inverse methods can be helpful in designing optical systems of reflectors and lenses. The equations in R2 become ordinary differential equations, while in R3 the equations become partial differential equations. These equations are then used to transform source distributions into target distributions, where the distributions are arbitrary, though assumed to be positive and integrable. In this project, we derive the governing equations and solve them numerically, for the systems presented by our instructor Martijn Anthonissen [Anthonissen et al. 2021]. Additionally, we show how point sources can be derived as a special case of a interval source with di- rected source interval, i.e., with each point in the source interval there is also an associated unit direction vector which could be derived from a system of two interval sources in R2. This way, it is shown that connecting source distributions with target distributions can be classified into two instead of three categories. The resulting description of point sources as a source along an interval with directed rays could potentially be extended to three dimensions, leading to interpretations of point sources as directed sources on convex or star-shaped sets.:1 Abstract 4 2 Notation And Conventions 4 3 Introduction 5 4 ECMI Modeling Week Challenges 5 4.1 Problem 1 - Parallel to Near-Field Target 5 4.1.1 Description 5 4.1.2 Deriving The Equations 5 4.2 Problem 2 - Parallel Source To Two Targets 8 4.3 Problem 3 - Point Source To Near-Field Target 9 4.3.1 Deriving The Equations 9 4.4 Problem 4 - Point Source To Two Targets 11 5 Validation - Ray tracing 13 5.1 Splines 13 5.1.1 Piece-Wise Affine Reflectors 13 5.1.2 Piece-Wise Cubic Reflectors 14 5.2 Error Estimates For Spline Reflectors 14 5.2.1 Lemma: A Priori Feasibility Of Starting Values For Near-Field Problems 15 5.2.2 Estimates for single reflector, near-field targets 16 5.3 Ray Tracing Errors - Illumination Errors 17 5.3.1 Definition: Axioms For Errors 18 5.3.2 Extrapolated Ray Tracing Error (ERTE) 18 5.3.3 Definition: Minimal Distance Ray Tracing Error (MIRTE) 19 5.3.4 Lemma: Continuity Of The Ray Traced Reflection Projection Of Smooth Reflectors 19 5.3.5 Theorem: Convergence Of The MIRTE 20 5.3.6 Convergence Of The ERTE 21 5.3.7 Application 21 6 Numerical Implementation 21 6.1 The DOPTICS Library 21 6.2 Pseudocode Of The Implementation 21 6.2.1 Solutions Of The Problems 22 6.2.2 Ray Tracing And Ray Tracing Error 22 6.3 ERTE Implementation 25 7 Results 26 7.1 Problem 1: Results 26 7.2 Problem 2: Results 26 7.3 Problem 3: Results 27 7.4 Problem 4: Results 27 8 Generalizations In Two Dimensions 29 8.1 Directed Densities 29 8.2 Generalized, Orthogonally Emitting Sources in R2 30 8.2.1 Point Light Sources As Orthogonally Emitting Sources 30 9 Conclusion and Future Research 32 10 Group Dynamic 32 References 32

Cette thèse traite des caméras light-field en tant que caméra ayant des capacités 3D. Les images brutes, acquises avec ces systèmes, sont généralement inexploitables directement. L’obstacle majeur concernant l'utilisation de ces caméras réside dans la complexité du traitement des images acquises. Cette thèse vise à dépasser ces limitations en s'intéressant aux dispositifs multi-vues et multi-caméras. De plus, comme l'un des domaines d'application envisagé est la vision industrielle, les images sont acquises en lumière naturelle afin de conserver la possibilité d'effectuer des traitements conventionnels par vision sur les images. Le travail de thèse repose sur trois axes : l'étude et la conception optique de systèmes light-field multi-caméras et multi-vues, le calibrage de ces dispositifs et le développement d’algorithmes et enfin leur mise en application pour montrer les intérêts de ces caméras dans divers domaines. / This thesis deals with light-field cameras as cameras having 3D capacities. The raw images. acquired with these systems, are generally unusable directly. The main obstacle about their use lies in the complex processing of the recorded images. This thesis aims to overcome these limitations by focusing on multi-views and multi-camera devices. Morcover, as one of the application domains is the industrial vision, the images are acquired in natural lightning in order to conserve the possibility to make conventional treatments by vision on the images. The work is based on three axis: the study and'the optical desien of light-field systems, the calibration of these devices and the development of algorithms to show the intercsts of these cameras in various fields.

No description available.