In this PhD thesis, the nano-opto-mechanical system (NOMS) is explored and two nano-opto-mechanical devices are designed, analyzed, simulated and fabricated. Firstly, an angular momentum generator consisting of a ring resonator, a wave guide and a group of nano-rods is designed, theoretically analyzed and simulated. The theoretic alanalysis and numerical results show that a series of rotating optical field (ROF) are generated when different resonant wave lengths are coupled into the generator. Subsequently, the optical force, the optical potential and the optical torque of the generated ROF are theoretically analyzed, numerically simulated and discussed. The optical force distributions are affected by the ROF with different angular orders and different objects. The optical torques are analyzed and discussed for different objects, i.e. spherical nano-particle, nano-wire and nano-rotor. Finally, a tunable coupled-resonator-induced transparency (CRIT) system, which is driven by the optical force between the ring resonator and the substrate, is designed, theoretically analyzed, simulated, fabricated and experimented. The tunable CRIT system consists of a bus wave guide and two coupled ring resonators, in which one is the released ring and the other is the fixed ring. Different input powers produce different optical forces on the released ring, which produce different final deformations, change the optical field buildup, shift the transmission spectrum and vary the group delay

The objective of this thesis work is to increase the functionality of optical fibers for possible applications in life-sciences. Optical fibers are a promising technology for use in biology and medicine. They are low-costwaveguides, flexible and have a small cross-section. They can guide high-power light with low loss in a micrometer core-size. These features make fibers attractive for minimally-invasive,in-vivostudies. The backwards guidance of the optical signal allows for real-time monitoring of the distance to the scattering targets and to study the environment through Raman scattering and fluorescence excitation. The longitudinal holes introduced in the fibers can be used,for instance,for delivery of medicine to a specific regionof a body. They could even be used for the extractionof species considered interesting for further analysis, for example, studyingcells that may be cancer-related. This thesis deals with four main topics. First, a demonstration is presented of the combination of high-power light guidance for ablation, low-power light reflectometry for positioning, and for liquid retrieval in a single fiber. It was found that in order to exploit the microfluidic possibilities available in optical fibers with holes, one needs to be able to combine fluids and light in a fiber without hindering the low-loss light guidance and the fluid flow. Secondly, one should also be able to couple light into the liquids and backout again. This is the subject of another paper in the present thesis. It was also observed that laser excitation through a fiber for the collection of a low-intensity fluorescence signal was often affected by the luminescence noise createdby the primary-coating of the fiber. This problem makes it difficult to measure low light-levels, for example, from single-cells. Athirdpaper in this thesis then describes a novel approach to reduce the luminescence from the polymer coating of the fiber, with the use of a nanometer-thick carbon layer on the cladding surface. Finally, exploiting some of the results described earlier, an optical fiber with longitudinal holes is used for the excitation, identification and for the collection of particles considered being of interest. The excitation light is guided in the fiber, the identification is performed by choosing the fluorescent particles with the appropriate wavelength, and, when a particle of interest is sufficiently near the fiber-tip, the suction system is activated for collection of the particle with good specificity. It is believed that the work described in this thesis could open the doors for applications in life-sciences and the future use of optical fibers for in-vivo studies. / <p>QC 20140516</p>

Immobilization of photosynthetic cultures has been used to generate biofuels and high value compounds through direct conversion of CO2 and water using sunlight. Compared with suspended cultures, immobilized bacteria can achieve much higher densities resulting in greater areal productivity. Limitations exist however, on the density that can be reached without compromising access to light and other nutrients. In this thesis an optofluidic approach to overcoming the challenge of light delivery to high density cultures of cyanobacteria is described and proof of concept experiments presented. This approach uses optical waveguides to deliver light to cells through bacterial interaction with the evanescent field and is tailored to meet each cell's need for light and nutrients. Experiments presented here demonstrate biofilm proliferation in the presence of evanescent fields. Illumination of surfaces by surface plasmon enhanced evanescent fields is also shown to be an effective and potentially useful technique to grow biofilms within optofluidic architectures.

This thesis details the design, fabrication, and testing of two optofluidic platforms, a square fused silica capillary and a MgF2-PDMS microfluidic chip to detect radiation-induced biochemical changes in cells during radiation treatment (radiotherapy). The platforms integrate a near-infrared Raman system of 785 nm excitation and a fiber-based optical trap at 1064 nm in a dual-beam configuration for the manipulation and subsequent examination of single polystyrene beads (5µm) and two breast carcinoma cell lines, MCF-7, and MDA-MB-23 (20-30 µm). Particular attention was paid to the role of MgF2 as a novel substrate for microfluidic fabrication and the device background contributions that could hinder spectral contributions from the samples. Successful optical trapping within the platforms was performed, which allowed the sample immobilization for the entire Raman acquisition time (10-30 s) via an orthogonally positioned objective for the excitation and collection of Raman signal. Data collected in the MgF2-PDMS microchip yielded high-quality spectra with no presence of PDMS characteristic Raman peaks in the spectral region of 450-1800 cm-1. / Graduate / 2023-04-08

No description available.

<p>Lab-on-a-chip technologies have created a burgeoning number of new and novel devices designed to automate biological processes on-chip in an efficient and inexpensive format for far reaching point-of-care (POC) medicine and diagnostic treatments and for remote and on-line monitoring functions. This work designed a device that integrated advanced optical functionality on-chip with the microfluidics to relieve the reliance on traditional bulky and expensive free-space optics and a high-quality light source. The multimodal input beam was reshaped into an optimized geometry in the microchannel via a 2D system of lenses - improving the quality and reliability of detection through uniform detection of particles. A uniform beam geometry across the sample stream with a uniform beam width will allow repeatable excitation and burst duration to allow for more reliable and predictable detection. Numerous beam geometries were created and the quality and illumination properties confirmed by testing each with a couple sizes of fluorescent and non-fluorescent microspheres to test the effect of beam geometry and particle size combination on device performance. The measured coefficient of variation (CV) for fluorescent beads was found to have a particular beam geometry that yielded best device performance based on the bead size. Fluorescent beads 2.5µm in diameter had a CV of 8.5% for a 3.6 µm beam waist while 6 µm beads yielded a 14.6% CV with a 10 µm beam waist. When measuring scatter and fluorescence signal from a 10 µm the 2.5- and 6.0 µm beads gave 11.4% and 15.8% and 15.9% and 20.4% fluorescent and scatter CVs for each set of beads, respectively. Separately testing each beam geometry with 1-, 2-, and 5 µm beads did not yield any predictable ideal beam-bead ideal pairing for best performance. Lastly, further integration of optical function was shown through the on-chip collection of signals; CVs of 29% and 30% were measured for side scatter and forward scatter, respectively, for 5 µm beads. The reliability of this all-optically guided scheme was confirmed by comparing it to a simultaneously recorded free-space collection scheme. The coincidence rate was found to be 94% and 96% for the side scatter and forward scatter schemes. Both had very low false positive rates – below 0.5% - with missed detection rates that were satisfactory but in need of improvement. Sources of noise and device improvements were identified and suggested.</p> / Doctor of Philosophy (PhD)

Optical resonators such as silica micro-spheres and micro-toroids can support whispering gallery modes (WGMs), where light circulates near the resonator surface and is confined by the total internal reflection at the dielectric boundary. Such resonators can exhibit very high quality (Q) factors, since the resonator surface can maintain atomic level smoothness. The combination of high Q factors and small resonator volumes has led to a wide range of applications in sensing, optomechanics, nonlinear optics, and quantum optics. In this dissertation, we introduce a new type of whispering gallery resonators (WGRs) based on micro-droplets in an immiscible liquid-liquid system. Within such an all-liquid platform, it is possible to achieve highly nonlinear coupling between light and liquid that can potentially lead to single-photon level optical nonlinearity. Specifically, we experimentally characterize a droplet (D~500um) of index matching fluid submerged in the water as a high-Q optical resonator, where we use an optical fiber taper to couple light into the droplet through non-contact evanescent coupling. The highest Q-factor observed in the experiment is 2x10^7 which closely matches the upper limit of intrinsic Q-factor set by the material absorption. Given with such a high Q factor, the WGM can exert strong radiation pressure on the droplet interface, push it outward, increase the length of optical path, and produce a red-shift in WGM resonance. Our experimental results have found that the ratio of those resonance shifts and the optical power coupled into the resonator is approximately 60 fm/μW. The result closely matches to our steady-state estimation based on solving the coupled Maxwell-Navier-Stokes equation. To investigate the dynamic interplay of light and liquid, we develop a harmonic oscillator (HO) model to describe the time-domain behaviors of the coupled optofluidic system. We find a good agreement between theoretical predictions and our experimental data. The shift of WGM resonance can potentially be induced by thermal effects. To estimate the magnitude of thermal effects, we also investigate the thermally induced nonlinear behaviors of WGMs in a cylindrical fiber resonator (D~125um), where we change the mechanism of heat dissipation by changing the cladding material (e.g. air and water). For direct temperature measurements, we use a fiber optical resonator with a fiber Bragg grating (FBG) inscribed in the fiber core to observe temperature shifts induced by the high-Q WGMs. Our result shows that the temperature increase in the fiber resonator in the water is 0.13 C, whereas the fiber resonator in air shows ~4.5 C increase in temperature. Our results suggest that the relatively high thermal conductivity of water suppresses thermal nonlinearity by ~50 times, and that the red-shifts of WGMs can largely be attributed to radiation pressure effect. / Ph. D. / Optical resonators are used to confine incoming light and store its energy in a small volume. The quality of such resonators’ optical confinement is represented by quality factor (<i>Q</i>). Among different types of optical resonators, whispering gallery resonator (WGR) is well known for its high-<i>Q</i>, where strong optical confinement is achieved by the total internal reflection at the curved internal surface of spherical / cylindrical dielectric volume. The combination of high <i>Q</i> factors and small resonator volumes has led to a wide range of applications in sensing, optomechanics, nonlinear optics, and quantum optics. In this dissertation, we introduce a new type of WGR based on oil micro-droplet in water. Such an all-liquid platform enables highly nonlinear coupling between optical power and liquid matter that can potentially lead to optical nonlinearity at single-photon energy level. Specifically, we experimentally characterize an oil droplet (<i>D</i> ≈ 500 <i>um</i>) submerged in the water as a high-<i>Q</i> optical resonator, where we use a tapered optical fiber to inject optical power into the droplet. The highest <i>Q</i> of whispering gallery mode (WGM) observed in our experiment is 2×10⁷ and given with the high amplification of optical power in droplet, the WGM can exert strong radiation pressure on the droplet interface, push it outward, increase the length of optical path, and produce a red-shift in WGM resonance. Our experimental results have found that the ratio of those resonance shifts and the optical power coupled into the resonator is approximately 60 fm/<i>μ</i>W. The result closely matches to our steady-state estimation based on solving the coupled Maxwell-Navier-Stokes equation. To investigate the dynamic interplay of light and liquid, we develop a harmonic oscillator (HO) model to describe the time-domain behaviors of the coupled optofluidic system. We find a good agreement between theoretical predictions and our experimental data. The shift of WGM resonance can potentially be induced by thermal effects. To estimate the magnitude of thermal effects, we also investigate the thermally induced nonlinear behaviors of WGMs in a cylindrical fiber resonator (D ≈ 125 <i>um</i>), where we change the mechanism of heat dissipation by changing the media (e.g. air and water) surrounding the resonator. For direct temperature measurements, we use a fiber optical resonator with a temperature sensor equipped inside to observe temperature shifts induced by the high-<i>Q</i> WGMs. Our result shows that the temperature increase in the fiber resonator in the water is 0.13 °C, whereas the fiber resonator in air shows ~4.5 °C increase in temperature. Our results suggest that the relatively high thermal conductivity of water suppresses thermal nonlinearity by ~50 times, and that the red-shifts of WGMs can largely be attributed to radiation pressure effect.

Adaptive optic technology has revolutionized real time correction of wavefront aberrations. Optofluidic based applied optic devices have offered an opportunity to produce flexible refractive lenses in the correction of wavefronts. Fluidic lenses have superiority relative to their solid lens counterparts in their capabilities of producing tunable optical systems, that when synchronized, can produce real time variable systems with no moving parts. We have developed optofluidic fluidic lenses for applications of applied optical devices, as well as ophthalmic optic devices. The first half of this dissertation discusses the production of fluidic lenses as optical devices. In addition, the design and testing of various fluidic systems made with these components are evaluated. We begin with the creation of spherical or defocus singlet fluidic lenses. We then produced zoom optical systems with no moving parts by synchronizing combinations of these fluidic spherical lenses. The variable power zoom system incorporates two singlet fluidic lenses that are synchronized. The coupled device has no moving parts and has produced a magnification range of 0.1 x to 10 x or a 20 x magnification range. The chapter after fluidic zoom technology focuses on producing achromatic lens designs. We offer an analysis of a hybrid diffractive and refractive achromat that offers discrete achromatized variable focal lengths. In addition, we offer a design of a fully optofluidic based achromatic lens. By synchronizing the two membrane surfaces of the fluidic achromat we develop a design for a fluidic achromatic lens.The second half of this dissertation discusses the production of optofluidic technology in ophthalmic applications. We begin with an introduction to an optofluidic phoropter system. A fluidic phoropter is designed through the combination of a defocus lens with two cylindrical fluidic lenses that are orientated 45° relative to each other. Here we discuss the designs of the fluidic cylindrical lens coupled with a previously discussed defocus singlet lens. We then couple this optofluidic phoropter with relay optics and Shack-Hartmann wavefront sensing technology to produce an auto-phoropter device. The auto-phoropter system combines a refractometer designed Shack-Hartmann wavefront sensor with the compact refractive fluidic lens phoropter. This combination allows for the identification and control of ophthalmic cylinder, cylinder axis, as well as refractive error. The closed loop system of the fluidic phoropter with refractometer enables for the creation of our see-through auto-phoropter system. The design and testing of several generations of transmissive see-through auto-phoropter devices are presented in this section.

In this thesis, miniaturized wavelength interrogators based on planar lightwave circuits (PLCs) are investigated and developed for the optical fiber sensing applications in the aircraft structural health monitoring (SHM) and optofluidic analysis. Two interrogation systems based on an arrayed waveguide grating (AWG) and an Echelle diffractive grating (EDG) are developed and used to convert the optical sensing signals into strain, temperature, vibration, damage, and humidity information for the aircraft SHM. A fiber Bragg grating (FBG) sensing system using developed interrogators is then demonstrated in a field test for aircraft SHM applications. For optofluidic analysis, a PLCs based optofluidic device consisting of two on-chip lens sets is built to enhance the optical manipulation capability of particles. Then, a solution to a multi-functional Lab-on-a-Chip platform for optofluidic analysis is proposed, which integrates the developed particle maneuvering device, grating-structured sensors, and miniaturized interrogators.

L’exploitation de l’énergie nucléaire pour la production d’électricité présente un défi de gestion des e˜uents radiotoxiques pour les générations présentes et futures. Face à ce constat, la communauté des chimistes recherche continument à améliorer les solutions de traitement et de recyclage du combustible usé. Dans le contrôle de ces procédés, les opérations d’analyse jouent un rôle primordial. La miniaturisation des procédés est un des enjeux principaux de la recherche en sûreté nucléaire, dans un e˙ort de réduction des risques, des délais et des coûts des activités de laboratoire. Dans ce contexte, les travaux présentés ici sont issus d’une collaboration entre le CEA de Marcoule et l’IMEP-LAHC et traitent de la mise au point d’un microsystème optofluidique sur verre, adapté à la mesure de concentration de plutonium (VI) en acide nitrique. Une source de lumière sonde est confinée dans un guide d’onde obtenu par échange d’ions et interagit par onde évanescente avec un canal microfluidique. La raie d’absorption à 832 nm du Pu(VI) dans la solution à analyser devient donc observable dans le spectre de la lumière après une certaine longueur d’interaction. Un des enjeux principaux est de fabriquer un capteur très robuste, fonctionnel en boîte à gants. L’assemblage du dispositif est e˙ectué par collage moléculaire avec un procédé permettant d’atteindre une énergie de surface > 2, 5 J·m2 suÿsante à garantir la tenue du dispositifs à des pressions testées jusqu’à 2 bars dans les canaux. Les fonctions optiques et fluidiques du dispositif sont complètement interfacées avec des fibres optiques et des capillaires fluidiques. Des mesures spectrales d’une solution de plutonium (VI) en acide nitrique ont permis de vérifier la compatibilité de la solution technologique abordée pour la manipulation d’acides forts et la résistance à l’irradiation. Le système présente une limite de détection de 1,6·10−2 mol·L−1 Pu(VI) pour un volume sondé inférieur à 1 nano-litre, au sein d’un microcanal de 21 micro-litres. Une structure permettant d’optimiser la sensibilité du capteur ainsi que le volume du canal est étudiée en perspective du travail de thèse, afin d’atteindre les performances équivalentes à des outils commerciaux pour des volumes sondés de l’ordre de quelques nano-litres. / .The use of nuclear energy for electricity production presents an important concern with radiotoxic waste management for present and future generations. In view of this fact, the chemists’ community has been searching for solutions to treat and recycle nu-clear fuel. The miniaturization of chemical processes is extensively sought out nowerdays, in an attempt to reduce laboratory acivity risks, delays and costs. The researched ana-lytical innovation requires subsequent development of appropriate analysis tools. In this respect, the work presented here addresses the development of co-integrated optofluidic micro-systems on borosilicate glass, compatible with nuclear e˜uent analysis constraints. A spectrometric sensor is designed, fabricated, interfaced and characterized in a nuclear environement. An optical waveguide and a microfluidic channel are designed adjacent to one another in order to obtain wide-spectrum absorption spectroscopy measurements by light/fluid evanescent interaction. Both ion-exchange technology and wet-etching tech-nologies were used to create the optical and fluidic planar functions. The device is assem-bled by direct molecular bonding with an optimized protocole which withstands surface energies > 2, 5 J·m2. Sensor optical and fluidic functions are interfaced with fiber optics and fluid capillaries in order for the chip to be used within a plug-and-play detection chain. Spectral measurements of a plutonium(VI) in nitric acid solution have allowed to verify the technological solution’s compatibility with harsh acid manipulation and irra-diation resistance. The system put together for the detection of plutonium(VI) displays a detection limit of 1.6×10−2 mol·L−1 for a probed volume below 1 nano-liter, inside a 21 micro-liter channel. A new sensor design is studied in the thesis work perspectives in order to optimize sensor detection limit and channel volume and reach industrial tools analytical performances with nano-liter sample volumes.