This thesis is dedicated to studies of the excited-state dynamics in organic molecular systems for solar energy conversion by employing time-resolved experimental techniques. Organic photovoltaic (OPV) devices have received significant attention in the past decade and reaching record high power conversion efficiencies (PCE) above 17%. An essential step towards reaching the predicted PCE limit of 25.5% is to develop a comprehensive picture of the photophysical processes, specifically the loss processes, in OPV devices. It is the aim of this thesis to investigate and understand the fate of excited-states in organic electron donor/acceptor systems by ultrafast spectroscopic techniques, specifically, to reveal the interplay between energy and charge transfer processes. The first part deals with the identification of different polymorphs in a diketopyrrolopyrrole-based (DPP) polymer. Applying time-resolved photoluminescence (TRPL) measurements to the polymer dissolved in different solvent mixtures and using multivariate curve resolution (MCR) to deconvolute the ground-state absorption spectra reveals the co-existence of an amorphous (α) and two semi-crystalline (β1 and β2) polymer phases. The OPV device performance is shown to increase by the additional absorption of the β2 phase. The second part compares the efficiency of direct and energy transfer-mediated charge generation in prototypical donor-acceptor dyads that use as the electron donor triangulene derivatives chemically linked to the electron acceptor perylenediimide (PDI) block via oligophenylene spacers of different lengths. Charge generation efficiencies are found to be similar and increase with the donor-acceptor spatial separation. A combination of transient absorption (TA) measurements and computation of the dyad’s excited-state landscape revealed the presence of “optically-dark” excited-states that are populated by ultrafast donor-acceptor energy transfer prior to hole (back) transfer. The last part of the dissertation uses TRPL, TA, and time-delayed collection field (TDCF) measurements alongside MCR analysis to provide a comprehensive analysis of the yield of individual photophysical processes in OPV devices. A systematic methodology is proposed and tested on two all-polymer BHJ devices used as model systems. The experimental findings are supported by successful simulation of the solar cells’ JV characteristics using the spectroscopically-determined kinetic parameters. More generally, this approach can be used to quantify efficiency-limiting processes in other donor-acceptor BHJs.

In the last decade, organic photovoltaics (OPVs) have been attracting much attention for their low cost, and feasibility of mass production in large-area modules. Reported power conversion efficiencies (PCE) of organic solar cells have reached more than 10%. These promising PCEs can be realized by uncovering important principles: (1) rational molecular design, (2) matching of the material energy level, (3) favorable morphology of donor-acceptor (D/A) network, (4) higher carrier mobilities, and (5) suppression of charge recombination within the bulk heterojunction (BHJ). Though these key properties are frequently stated, the relationships between these principles remain unclear, which motivates us to fill these gaps. In the beginning, we show that changing the sequence of donor and acceptor units of the benzodithiophene-core (BDT) SM donors critically impacts molecular packing and charge transport in BHJ solar cells. Moreover, we find out that by adding small amount of the external solvent additive, the domain size of the SMFQ1 become relatively smaller, resulting in the FF enhancement of ~70% and thus pushing PCE to >6.5%. To further improve the device performance, we utilize another technique of device optimization: Solvent Vapor Annealing (SVA). Compared with solvent additive, the SVA creates a solvent-saturated environment for SMs to re-arrange and crystalize, leading to PCE of >8%, with nearly-free bimolecular recombination. When the systems are shifted from fullerene acceptors to nonfullerene acceptors, using solvent additives in indacenodithiophene-core (IDT) systems significantly reduces the domain size from >500nm to <50nm and also allows the SM donors to orderly packed, rising the PCE from <1% to 4.5%. Furthermore in a similar IDT-based system, it shows unexpectedly high VOC and low energy loss, and high PCE > 6% can be reached by employing the dimethyl disulfide (DMDS) as the SVA solvent to re-organize the morphology from excessive mixing to ordered phase-separated D/A network. Lastly, taking advantage of the distinct and complementary absorption of fullerene and nonfullerene acceptors, we show that the SM ternary system successfully realizes the high PCE of 11%, good air stability, and scalable property.

The study of the new materials potentially usable for organic photovoltaic and electronics are getting very important from the point of ecological and financial view. Organic electronic devices are getting more and more popular and it is only up to us to search for the new ones that are able to improve their physical properties. The aim of this thesis is to search for materials like have been mentioned above which have very good semiconducting properties. Solutions of pure materials and its mixtures with different concentrations of fullerene have been investigated by ultra-violet spectroscopy, classical fluorescence and time resolved spectrometry. Mainly, were studied the influence of the central atom and side substituents for the optical and electronical properties of our materials of interest. With adding fullerene was observed quenching phenomena of the fluorescence, because all these new materials show usually high photoluminescence. Based on the given results, the most suitable materials had been chosen to provide trial of making organic solar cell, and therefore investigated by the mean of electric measurements (direct current).

No description available.

The cost of the present generation of inorganic silicon solar cells is very high and further breakthroughs in cost and efficiency using traditional materials are becoming less and less likely after over 50 years of development. Next generation organic solar cells offer a solution to the limitations of silicon through the vision of low-cost, liquid-based, large area fabrication technology based on polymer and nanomaterials at room temperature. However, most polymers used in solar cells are dissolved in organic solvents such as xylene, toluene, chloroform, and chlorobenzene. Such solvents are harmful to people and environments, leading to higher costs due to complicated waste disposal processing. This is in conflict with the low cost, green, and renewable energy for which we are aiming. To realize a green organic solar cell, a novel solar cell has been created using an environmentally friendly water-soluble thiophene polymer [(Sodium poly[2-(3-thienyl)-ethoxy-4-butylsulfonate])] (PTEBS) and nanocrystalline TiO2. This novel system has shown great potential in photovoltaics the work has garnered the attention of the international community.In our innovative solar cells, the water-soluble polythiophene (PTEBS) is used as electron donor. Nanoparticle TiO2 acts as electron acceptor. PTEBS/TiO2 solar cells with various structures including bilayer heterojunctions, bulk heterojunctions and a hybrid of bilayer and bulk heterojunctions have been developed and explored. These results are comparable to the best polymer/metal-oxide solar cells reported by other groups using organic solvents.In summary, this is the first time that green solar cells have been fabricated from environmentally friendly water-soluble polymers. By using water as the solvent and utilizing liquid-based processing, the cost of the energy generated by this type of solar cell will be further lowered. In addition, the flexible polymer offers the ease of fabrication and integration into different devices.

Organic solar cells are one of the most promising candidates for future solar power generation. They are thin and lightweight with several additional advantages such as scalability, environmental sustainability and low cost for processing and installation. However, the low charge carrier mobility of the absorbing material for organic solar cells requires thin absorber layers, limiting photon harvesting and the overall power conversion efficiency. Several attempts, e.g., periodically patterned structures and scattering layers have been tried to enhance the absorption of thin-film solar cells as light trapping elements. However, much effort is required to introduce light trapping structures to conventional rigid metal oxide electrodes and glass substrate. For instance, almost 13 hours are required to fabricate micro structures of 1 m2 area on glass, in contrast, 1 minute on PET using a same laser set-up and an additional scattering layers are demanded for providing light trapping effects to solar cells. In the last years, flexibility is emerging as the one of the major advantages of organic solar cells. To realize flexibility of solar cells, the classically used glass substrates and ITO electrodes are too brittle. Therefore, polymer materials are promising candidates to replace them as flexible electrodes and substrates. In this thesis, the highly transparent conducting polymer, PEDOT:PSS and PET equipped with an AlOx encapsulation layer are used as electrode and substrate, respectively. Besides the flexibility, additional light trapping elements, e.g. scattering particles, nano- and microstructures can be easily applied to the polymer materials since they have the potential for easier shaping and processing. In this study, we apply different light trapping and in-coupling approaches to organic solar cells. First, PET substrates are structured with a direct laser interference patterning system, which is a powerful and scalable one-step technique for patterning polymers. Almost 80 % of the light is diffracted by these patterned PET substrates and thereby the light path in the absorption layer is increased. Optical display films, commercially developed to be used as back light units of liquid crystal displays are also examined as light trapping substrates and exhibit similar enhancement as patterned PET. Moreover, since PEDOT:PSS is prepared by a solution-based process, TiO2 nanoparticles are added as light scattering elements to the PEDOT:PSS electrodes. Consequently, those electrodes provide a dual function as electrical contact and light trapping element. Finally, 2- or 3-dimensional nanostructures are printed by a nano-imprinting technique onto the surface of PEDOT:PSS with PDMS stamps. By controlling the temperature and the time of PEDOT:PSS during an annealing step, nanostructures are transferred from PDMS masks to PEDOT:PSS. To evaluate the effects of light trapping for all above mentioned approaches, flexible organic solar cells are produced by vacuum evaporation using blends of DCV5T-Me and C60 as absorber layer. The substrates are optically characterized using UV-vis spectrometer and goniometer measurements. The topography of the samples is measured by atomic force microscopy, scanning microscopy and optical microscopy. Bending tests with various radii are performed to test the flexibility of the substrates. In summary, light trapping effects are successfully implemented in the electrodes and substrates for OPVs, giving efficiency improvements of up to 16 %. The light trapping mechanisms in our approaches are extensively discussed in this thesis. / Organische Photovoltaik ist einer der vielversprechendsten Kandidaten für die zukünftige Solarstromgewinnung auf flexiblen Substraten. Um diese Flexibilität zu ermöglichen, sind herkömliche Glassubstrate mit ITO-Elektroden zu spröde. Ein vielversprechender Kandidat, um sowohl flexible Elektroden als auch flexible Substrate herzustellen, sind Polymere, da diese sehr biegsam und leicht zu verarbeiten sind. Deshalb wird in dieser Arbeit das hoch transparente, leitfähige Polymer PEDOT:PSS als Elektrode und PET (mit einer AlOx Verkapselungsschicht) als Substrat untersucht. Aufgrund der guten Prozessierbarkeit der Polymere konnten wir zusätzlich zu den eigentlichen Funktionen des Substrates und der Elektrode noch den Mechanismus des Lichteinfangs hinzufügen. Zusätzlich zu ihrer Flexibilität haben organische Solarzellen noch weitere Vorteile: sie sind dünn, leicht, skalierbar und verursachen vergleichsweise geringe Kosten für Herstellung und Installation. Ein Nachteil organischer Solarzellen ist die vergleichsweise geringe Ladungsträgerbeweglichkeit der Absorbermaterialien, welche oft die Schichtdicke der Absorbermaterialien begrenzt. Dies hat weniger absorbierte Photonen, weniger Stromdichte und somit einen geringeren Wirkungsgrad zur Folge. In den letzten Jahren wurden periodisch strukturierte Substrate und streuende Schichten als Lichteinfangelemente eingesetzt, um den Wirkungsgrad organischer Solarzellen mit dünnen Absorberschichten zu erhöhen. Gestaltungsregeln für solche Lichteinfangelemente sind noch weitestgehend unbekannt. Im Rahmen dieser Arbeit strukturieren wir PET Substrate mit einem direkten Laserinterferenzsystem, welches ein leistungsfähiges, skalierbares Einschrittverfahren zur Polymerstrukturierung ist. Da PEDOT:PSS aus der Lösung prozessiert wird, können wir weiterhin Nanopartikel hinzufügen, die der Elektrode zusätzlich noch lichtstreuende Eigenschaften geben. Außerdem können 2- bzw. 3-dimensionale Nanostrukturen leicht mithilfe einer Stempeltechnik eingeprägt werden. Um die Effekte des Lichteinfangs, welcher durch die oben genannten Methoden erzeugt wird, zu untersuchen, werden flexible organische Solarzellen mittels Vakuumverdampfung prozessiert. DCV5T-Me und C60 bilden dabei die photoaktive Schicht. Somit werden die Licht fangenden Eigenschaften dieser flexiblen Solarzellen ausgenutzt und ausführlich in der Arbeit diskutiert.

Ce travail est consacré à l‟étude de la stabilité photochimique de nanocomposites polymère / argile en vue de leur insertion dans un système multicouche organique / inorganique pour l‟encapsulation des cellules solaires organiques. L‟objectif est d‟obtenir des films de nanocomposites polymère / argile flexibles, transparents, pouvant être mis en oeuvre par voie liquide, et photochimiquement stables. Dans une première partie, la caractérisation de nanocomposites à base d‟alcool polyvinylique (PVA) a montré leur aptitude à être insérés dans un système multicouche, notamment en ce qui concerne les propriétés barrière aux gaz. L‟étude du comportement photochimique du PVA basée sur l‟identification des produits de dégradation a permis de proposer un mécanisme de photooxydation du PVA et de déterminer les effets du photovieillissement sur les propriétés du film (rugosité, perméabilité, transparence). L‟insertion de nanocharges lamellaires (Montmorillonite, Laponite ou Hydroxydes Doubles Lamellaires) dans le PVA induit des effets différents (prodégradant ou stabilisant) en fonction de la nature de l‟argile (naturelle ou synthétique). Cependant, lors d‟irradiations en absence d‟oxygène, le PVA et les nanocomposites PVA / argile sont très stables. Enfin, l‟encapsulation alternant couche inorganique SiOx et couche organique PVA ou nanocomposite PVA / argile, permet d‟atteindre les niveaux de perméation requis pour les cellules solaires organiques pour des applications nomades. / This work was devoted to the study of the photochemical behavior of polymer / clay nanocomposites with the aim to use these nanocomposites in a multilayer organic / inorganic coating for organic solar cells encapsulation. The goal of this work was to obtain polymer / clay nanocomposite films that are flexible, transparent, which can be processed by solution, and that are photochemically stable. In the first part, the characterization of nanocomposites based on polyvinyl alcohol (PVA) has shown their ability to be inserted into a multilayer system, particularly for gas barrier properties. The study of the photochemical behavior of PVA with the identification of photodegradation products allows us to propose a photooxidation mechanism of PVA and to determine the effects of photoageing on the film properties (roughness, permeability, transparency). The insertion of lamellar nanofillers (Montmorillonite, Laponite or Layered Double Hydroxide) in PVA induces different effects (prodegradant or stabilising) depending on the nature of the clay (natural or synthetic). However, in absence of oxygen, the PVA and PVA / clay nanocomposites are very photostable. Finally, encapsulation alternating inorganic SiOx layer and PVA or PVA / clay nanocomposite layer permits to obtain the permeability levels required for organic solar cells in niche markets (consumer electronics).

<p>Over the last few decades, bulk-heterojunction organic photovoltaic devices comprising an intimately mixed donor-acceptor blend have gained serious attention due to their potential for being cheap, light weight, flexible and environmentally friendly. In this thesis, APFO-3/PCBM bulk-heterojunction based organic photovoltaic devices with an inverted layer sequence were investigated systematically. Doctor blade coating is a technique that is roll-to-roll compatible and cost efficient and has been used to fabricate the solar cells.</p><p>Initial studies focused on optimization of the electrodes. A thin film of the conductive polymer PEDOT:PSS was chosen to be the transparent anode. Different PEDOT:PSS films with respect to the film thickness and deposition temperature were characterized in terms of conductivity and transmission. Decent conductance and transmittance were obtained in the films deposited with wet film thickness setting of 35 μm, The cathode was fabricated from a metal bilayer comprising Al and Ti with an area about 1 cm², and the best-working cathodes contained a 70 nm thick Al layer covered by a thin Ti layer of about 10 -15 nm.</p><p>Optimized coating temperature and wet film thickness settings for the active layer and PEDOT:PSS layer were experimentally determined. The highest efficiency of the APFO-3/PCBM based inverted solar cells fabricated by doctor blading was 0.69%, which exceeded the efficiency of spin-coated inverted cells.</p><p>A higher efficiency (0.8 %) was achieved by adding a small amount of high molecular weight polystyrene to the active layer. Morphological changes after adding of the polystyrene were observed by optical microscopy and AFM. A coating temperature dependent phase separation of the APFO-3/PCBM/polystyrene blend was found.</p><p> </p>

<p>In this thesis, the microstructure of organic photovoltaic APFO-3:PC₆₁BM bulk-heterojunction blends was examined. Earlier studies have focused on the microstructure after spin coating. This thesis aims to give a better insight into microstructural degradation as the films are annealed above the glass transition temperature, T_g, and the mixture approaches thermodynamic equilibrium. Electro- and photoluminescence studies indicate that the polymer and PC₆₁BM are intermixed on a scale shorter than the exciton diffusion length of 10 nm, even when annealed above T_g. The temperature stability of APFO-3:PC₆₁BM was also investigated with respect to the molecular weight of the polymer. The photovoltaic performance of these blends was found to be stable up to temperatures approaching the glass transition temperature, especially if a high molecular-weight APFO-3 grade was used.</p><p> </p><p>The crystallization of PC₆₁BM was also investigated. Above T_g, PC₆₁BM crystallization was found to commence, albeit slowly at temperatures close to T_g. At elevated temperatures instead, micrometer sized crystals were observed to form. It was also noted that illumination while annealing APFO-3:PC₆₁BM thin films above T_g affected PC₆₁BM crystallization, the origin of which is so far unclear although chemical degradation could be largely excluded.</p>

In this thesis, the microstructure of organic photovoltaic APFO-3:PC61BM bulk-heterojunction blends was examined. Earlier studies have focused on the microstructure after spin coating. This thesis aims to give a better insight into microstructural degradation as the films are annealed above the glass transition temperature, Tg, and the mixture approaches thermodynamic equilibrium. Electro- and photoluminescence studies indicate that the polymer and PC61BM are intermixed on a scale shorter than the exciton diffusion length of 10 nm, even when annealed above Tg. The temperature stability of APFO-3:PC61BM was also investigated with respect to the molecular weight of the polymer. The photovoltaic performance of these blends was found to be stable up to temperatures approaching the glass transition temperature, especially if a high molecular-weight APFO-3 grade was used.   The crystallization of PC61BM was also investigated. Above Tg, PC61BM crystallization was found to commence, albeit slowly at temperatures close to Tg. At elevated temperatures instead, micrometer sized crystals were observed to form. It was also noted that illumination while annealing APFO-3:PC61BM thin films above Tg affected PC61BM crystallization, the origin of which is so far unclear although chemical degradation could be largely excluded.