The contemporary field �lesbian health� was shaped by a range of social and political changes in the last third of the twentieth century, as well as by discourses originating in the historical regulation of lesbianism. In discourse, lesbians have been produced as invisible, passive victims of heterosexist and potentially homophobic health-care providers. This project sought to understand how lesbians produce and manage their own health, and their interactions with doctors and other health-care providers. The research questions asked how discourses about lesbianism and the construction of the lesbian health field influence the ways in which lesbians construct and manage their own health, and how lesbians position themselves as they negotiate clinical spaces. Using semi-structured interviews, 19 women, aged between 22 and 64 years, who identified as lesbian, gay, same-sex-attracted and queer were interviewed. Interview data were analysed using discourse and content analysis. When they engaged with the health-care system, some participants produced their lesbianism as a social matter of no relevance to health; while for others their lesbianism was central to their health. An analysis of power relations revealed the complexity of ways the participants used agency to speak or remain silent about their sexual orientation. This was motivated by complex embodied understandings about the potential for emotional, physical or ontological harm involved in coming out in clinical spaces. Some chose to remain silent all, or some of the time, others to assertively identify themselves as lesbian. This depended on a range of contemporaneous factors including safety concerns, past experience and personal judgement. Whether to come out or not in the medical encounter was not necessarily a conscious decision, but was shaped by the individual�s embodied �sense for the game�. While the health-care system had frequently provided less than optimum care, these women were not passive, but used agency to decide whether or not their sexual orientation was relevant to the medical encounter.

Thesis (MA)--University of Stellenbosch, 2007. / Bibliography. Also available via the Internet.

Thesis (Ph. D.)--Ohio State University, 1981. / Includes vita. Includes bibliographical references (leaves 179-184). Available online via OhioLINK's ETD Center.

The aggravating investment environment in Taiwan has lead to migration of industries to oversea nations. China, with its geographical advantage, lower labor cost, and enormous market potential, has become Taiwan investors¡¦ preferred choice of investment region. Nevertheless, that has affected Taiwan¡¦s economy in many perspectives when a large amount of Taiwanese investors shifted their operations to China, along with their enormous amount of capital. Hence, the main focus of this thesis is to focus and evaluate this impact on Taiwan¡¦s economic growth, import and export structure, industrial adjustment, market competitiveness, employment issues and industrial hollowing-out effect. This thesis analyzes and evaluates several issues from Taiwanese investor¡¦s point of perspective, including: 1.Evaluate whether or not there is industrial hollowing-out effect in Taiwan. 2. The cause of industrial hollowing-out effect in Taiwan. 3. The correlation between investor¡¦s migration to China and industrial hollowing-out effect in Taiwan. 4.The influence of the industrial hollowing-out effect. This thesis adopts historical process research, statistics analysis method, and documentary research as the basis of evaluation. By the 5 criteria indicator (negative net value of foreign direct investment, the growing trend of unemployment rate, and the declining trend of the manufacturing-based industries over the GDP ratio, manufacturing labor productivity, and manufacturing investment) to examine if there is any data or evidence indicating that Taiwan at present is going through industrial hollowing-out. This Thesis has discovered the following facts: 1.The 5 criteria indicating an industrial hollowing-out is in effect. Over the 16 years from 1991 to 2006, the net value of Taiwan¡¦s foreign direct investment is ¡V35.213 billion dollars, and the unemployment rate has been rising since 1995. Manufacturing industries over the GDP ratio has declined from 33.34% to 21.39%. Manufacturing production index growth rate varied from 7.42% to 5.04%. Labor productivity index growth rate declined from 1.29% to -2.37%. And except 2004, manufacturing gross domestic capital formation growth rate (nominal or real) has been decreased since 2001. From these findings stated above, Taiwan has faced all of the 5 trends and hence, Taiwan has begun to face the industrial hollowing-out effects. 2.The causes of Taiwan¡¦s industrial hollowing-out are as follows: (1) the over-extended migration of investment to China. (2) the problem of industries¡¦ structural adjustment. (3) the similarity of exporting products, which leads to the trade competition. (4) insufficient local investment. 3.Industrial hollowing-out effects can be discussed under the perspectives of the employment market, the industries structural and the international market. From the market employment perspective, the industrial hollowing-out results in high unemployment, stagnant wage growth and imbalance on spread of wealth. From industries structural point of view, the hollowing-out effect causes struggling in industries technological advancement, difficulties in research and development for manufacturing industries, limitations of cooperation between global enterprises and the restriction of the economy growth. On international market level, the hollowing out effect would create the negative impacts such as difficulties in industrial restructuring, the tremendous international competition, the replacement of products manufactured in Taiwan with those made by other nations, and the inability to attract more foreign investment.

Objective – Some of the most vulnerable children and youths in our country are those in out of home care, and these children demonstrate higher rates of psychopathology and fare more poorly in school and in social relationships than their peers. Typically, when studying at risk populations, negative outcomes are examined, thereby ignoring those who do well despite their vulnerability. These children, who demonstrate positive patterns of functioning and development despite their exposure to adversity, are considered resilient. The objective of this study was to identify factors associated with a resilient outcome among children and youths in out of home care. Method – The study sample was comprised of 417 children 10 to 15 years old in Ontario who had been removed from their homes of origin and placed in out of home care. Predictor variables were selected based on previous research findings in the area of resilient outcome. In the cross-sectional study, a series of sequential logistic regression analyses were conducted to identify factors associated with a resilient outcome among children in out of home care. These children were then followed one year later. In the longitudinal study, another series of sequential logistic regression analyses were used to identify variables that were related to future resilient outcomes among the same children in out of home care. Results – The findings showed that many of the independent variables predicted resilient outcome on the different dimensions. Furthermore, overall resilient outcome was best predicted by the foster parental report of high sociability. Conclusion – The findings in the present study confirmed that there exists a subset of resilient children among children in out of home care. The findings allowed for the identification of some factors related to resilient outcome among this population. The practical implications of these findings are discussed.

Objective – Some of the most vulnerable children and youths in our country are those in out of home care, and these children demonstrate higher rates of psychopathology and fare more poorly in school and in social relationships than their peers. Typically, when studying at risk populations, negative outcomes are examined, thereby ignoring those who do well despite their vulnerability. These children, who demonstrate positive patterns of functioning and development despite their exposure to adversity, are considered resilient. The objective of this study was to identify factors associated with a resilient outcome among children and youths in out of home care. Method – The study sample was comprised of 417 children 10 to 15 years old in Ontario who had been removed from their homes of origin and placed in out of home care. Predictor variables were selected based on previous research findings in the area of resilient outcome. In the cross-sectional study, a series of sequential logistic regression analyses were conducted to identify factors associated with a resilient outcome among children in out of home care. These children were then followed one year later. In the longitudinal study, another series of sequential logistic regression analyses were used to identify variables that were related to future resilient outcomes among the same children in out of home care. Results – The findings showed that many of the independent variables predicted resilient outcome on the different dimensions. Furthermore, overall resilient outcome was best predicted by the foster parental report of high sociability. Conclusion – The findings in the present study confirmed that there exists a subset of resilient children among children in out of home care. The findings allowed for the identification of some factors related to resilient outcome among this population. The practical implications of these findings are discussed.

Since colonization, Indigenous women in Chiapas have occupied very disadvantaged social positions, characterized by ethnic, gender and class-based oppression. However, during the last thirty five years, important social dynamics have taken place which have driven women to perceive themselves as the main actors of social transformation, and to start participating in planning and development efforts at a household and community level. Building on the ideas of Paulo Freire and Pierre Bourdieu, oppression is understood as a dynamic where the oppressed are also implicated by, among other things, the involuntary body adhesion to oppression, experienced as shame, fear and silence. Therefore, the main focus of this research is the processes by which women achieved to exercise the internal capability to speak out; as well as how this new ability has been critical in order to have transformative agency, by having a meaningful participation in planning, agency and decision-making in the different spheres of their private and public life. The main findings of this thesis arise from six month of field research. With a phenomenological and hermeneutic approach, seventeen Indigenous and ten non-Indigenous women participated through in-depth interviews and focus groups. Participatory observation and a validation workshop were also undertaken. Findings are related, first, to women’s participation in group processes, by which, on the one hand, they achieved to generate critical-reflective awareness, denaturalizing oppression, and, on the other hand, they removed embodied oppressive dispositions by retraining their bodies through dialogue and corporal techniques. Second, praxis of liberation aroused from reflection, with no need of a mechanistic plan informed by efficient and effective predetermined justifications. Praxis of liberation took the form of practical wisdom and wise judgment for the achievement of good life.

In offset printing, dampening solution is used to create a good balance in the process. If too much water is transferred to the paper, the sheet can change its size between the printing units, due to water absorption, and cause a problem with the colour register. This phenomenon is usually referred to as fanout. In this degree project, an investigation was made to see if the paper dimensions changed through its way in the sheet-fed printing process. The instrument Luchs Register Measuring Systems (Lynx) was used, and a method for measuring if the paper changed its dimensions with this instrument, was developed. Paper qualities with three different grammages were used, 90, 130 and 250 gsm. This investigation showed that all paper qualities changed their size with widening in the gripper edge in the range of 10 - 70 µm and in the trailing edge the increase was 10 - 130 µm. The elongations of the papers were in the range of 10- 300 µm. The papers with lowest grammage changed more than the heavier. To see if the print had been affected of the widening and elongation, print quality parameters like relative contrast, dot gain and mottle were correlated with the Lynx data from the sheets. The group of papers that gave correlations were in 130 gsm. The sheets had visual doubling and the combined standard deviation from the Lynx marks K3, K5 and K21 correlated with dot gain. When the variations increased so did the dot gain and this indicates that the doubling was due to the widening. There was also a correlation between the standard deviation from K3 and Mottle. The sheets widened with an average of 30 µm in the gripper edge and since there probably were doubling due to widening it also affected the Mottle values. What the widening depends on is hard to tell. Since widening was so small, it could be due to water absorption, papers being ironed out or maybe the sheets have been flattened out. It probably needs a more detailed investigation to find out what causes the widening. Further investigations about how print quality is affected by the register accuracy of a printing machine should include a print form with measuring areas close to the Lynx marks. The measuring areas should contain fine hairlines, negative text printed with at least two colours and some pictures to evaluate together with standard measuring should give a good knowledge about the subject.

Whiplash injuries occur in automotive crashes and may cause long term health issues such as headache, neck pain, and visual and auditory disturbance. Whiplash-Associated Disorders are very costly and can impair the quality of human lives. Most studies focus on whiplash injuries that occur in neutral position head postures, although there is some evidence in the literature that non-neutral head posture can significantly increase the persistence of symptoms on patients. Crash dummies have limited biofidelity particularly for out-of-position scenarios and the current neck injury criteria were not derived for situations at which the head motion is not through the sagittal plane. Therefore Finite Element Methods provide an important tool that can be used to predict injury in different impact scenarios. The Finite Element model which was used for this study was previously developed at the University of Waterloo representing a 50th percentile male. The model had been previously validated at the segment level in extension, flexion, tension, and axial rotation. The full cervical spine model was validated in frontal and rear impact as well as tension. Since the final validation of the model, the ligament properties of the upper cervical spine and the muscle implementations had been improved to enhance the biofidelity of the model. To further improve the model, the addition of laxities to the ligaments of the upper cervical spine was studied. Several studies were performed based on the experiments in the literature to determine appropriate laxities for the upper cervical spine model. First, the laxities of -2 to 4 mm on all the ligaments were studied on the segment level of the model to find their effect on the failure force and displacement to failure in extension, flexion, tension, and axial rotation. The model development then went through a series of iterations in order to achieve laxity values that satisfied the failure force and displacement to failure reported in the literature for the four loading cases. Finally the laxities were used on a full cervical spine model and tested in physiological range of motion in extension, flexion, axial rotation, and lateral bending. The laxities were optimized using an iterative process. The results of this study provided laxity values that were acceptable in both segments level failure study and full cervical spine physiological range of motion study. The model was also validated against literature in impact scenarios. Using a cadaver experiment of 7 g rear impact, the global kinematics of the cervical spine was verified against the literature. The model provided good agreement with the head kinematics and relative rotations between the vertebrae for the cadaver tests. An 8 g rear impact cadaver test was used to validate the ligament strains and disc shear strains. For the anterior longitudinal ligament, the capsular ligament, and the disc shear strains, the model results were within one standard deviation of the literature in the majority of cervical spine regions that were reported. The model was also validated against volunteer low severity rear impact to verify the active musculature in the cervical spine. The head kinematics was generally within the boundaries that were reported by the literature. The model was compared to an experiment that used cadavers to investigate non-neutral rear impact scenarios. This experiment used cables and springs to replicate the passive behaviour of the musculature. The model showed good agreement with the extension and axial rotation results in both head kinematics and relative vertebrae rotations. The flexion and lateral bending results were not similar to the experimental data; attributed to the difference in muscle implementation between the two models. A total of 24 simulations were completed to find the effect of impact severity, axial rotation, and muscle activations on ligament strains during out-of-position rear impacts. The results illustrated that in general, ligament strains increased with the severity of impact and decreased with muscle activation. In out-of-position scenarios, the strains increased in some of the ligaments. An increase to the ligament strain as a result of non-neutral posture was mostly visible in the capsular ligaments of the upper cervical spine. The alar ligament and the apical ligaments of the upper cervical spine may fail in out-of-position at high rear impact scenarios. Recommendations for future work on the cervical spine Finite Element model includes the validation of the musculature and the usage of the muscles to rotate the head to a desired position to improve the biofidelity of the model and the results in out-of-position rear impacts. Further optimization of the laxities of the upper cervical spine can increase the biofidelity in this region. The modeling of the vertebral arteries into the FE model can help investigate whether out-of-position can increase the chance of injury of this region. The effect of flexion, extension, lateral bending, and their combination with axial rotation and the study of frontal and side impacts can be helpful in design of safer headrests for vehicles.

Currently in our domestic airports, there are some issues worth of studying. The issues include: problems regarding firefighter human resource, dilemma that needs breakthrough and whether the reinventing government is suitable from the long-term perspective. This report tries to exam the issues: vacancy demand, background and related problems that may follows of yearly-increased 336 firefighters from 2004 to 2008.Based on the reinventing government, background of affair contracting out ,theory for frequently applied contracting out, this report is analyze and evaluate examinees of different backgrounds¡¦ perception difference on¡ufinancial expenditure¡v¡B¡upersonnel administration¡v¡B¡ulegal system¡vand ¡uprivate sector support¡vof the above-mentioned firefighter human resource¡¦s outsourcing. Furthermore, the report evaluates the current firefighter human resource¡¦s dilemma and obstacles of implementing outsourcing for policy reference. Main findings are¡G 1.After technician from other organizations have finished training, human resource aging problem of firefighter human resource replacing policy. 2.Employed human resource for vacancy is worth of adopting. 3.The current dilemmas are lake of legal support for implementing public servant¡¦s firefighter system, financial burden for adding firefighting technician and increasingly-worsen human resource aging problem. 4.Reasons for applying outsourcing is to decrease financial burden on personnel expenditure, provide legal basic and non-core affairs, and deregulate for private administration. 5.Obstacles of outsourcing are lack or immaturity of firefighting human resource in private sector, tough assignment for current personneland concerns of policy for personnel vacancy transfer. 6.Obstacles of contracting out are many.Currently, it is not appropriate to implement outsourcing for firefighter human resource. If the obstacles can be overcome contracting out can be expected in the long run. At last, this report provides suggestions on short-term breakthrough, middle-term plan and long-term endeavor.