No description available.

No description available.

No description available.

No description available.

In this study the focus was on the electrochemical techniques and aspects behind the establishment of the better catalyst (platinum or gold) for the sulphur dioxide oxidation reaction (SDOR). One of the primary issues regarding the SDOR is the catalyst material, thus the comparative investigation of the performance of platinum and gold in the SDOR, as found in this study. Ultimately, the SDOR could lead to an effective way of producing hydrogen gas, which is an excellent energy carrier. The electrochemical application of the oxygen reduction reaction (ORR) and ethanol oxidation reaction (EOR) is an integral part of the catalytic process of water electrolysis, and by using fuel cell technology, it becomes even more relevant to this study and can therefore be used as a control, guide and introduction to the techniques required for electrochemical investigation of catalyst effectiveness. Subsequently, the EOR as well as the ORR was used as introduction into the different electrochemical quantification and qualification techniques used in the electrochemical analyses of the SDOR. Considering the ORR, gold showed no viable activity in acidic medium, contrarily in alkaline medium, it showed good competition to platinum. Gold also lacked activity towards the EOR in acidic medium compared to platinum, with platinum the best catalyst in both acidic and alkaline media. Ultimately, platinum was established to be the material with better activity for the ORR with gold a good competitor in alkaline medium, and platinum the better catalyst for the EOR in both acidic and alkaline media. With the main focus of this study being the SDOR, gold proved to be the best catalyst in salt and gaseous forms of SO2 administration compared to platinum when the onset potential, maximum current density, Tafel slope and number of electrons transferred are taken into consideration. The onset potential was determined as 0.52 V vs. NHE for both platinum and gold using SO2 gas and 0.54 V and 0.5 V for gold and platinum respectively, using Na2SO3 salt. The maximum current density using gaseous SO2 for platinum at 0 RPM was 400 mA/cm2 with a Tafel slope of 891 mV/decade whereas gold had a maximum current density of 300 mA/cm2 and a Tafel slope of 378 mV/decade. Using Na2SO3 salt, the maximum current density of gold was 25 mA/cm2 with a Tafel slope of 59 mV/decade whereas platinum only achieved 18 mA/cm2 with a Tafel slope of 172 mV/decade. Concerning the number of electrons transferred, gold achieves a transfer of 2 while platinum only 1 for both SO2 gas and Na2SO3 salt. Taking all these summarised determinations into account, gold was established to be a very competitive catalyst material for the SDOR, compared to platinum. / MSc (Chemistry), North-West University, Potchefstroom Campus, 2015

In this study the focus was on the electrochemical techniques and aspects behind the establishment of the better catalyst (platinum or gold) for the sulphur dioxide oxidation reaction (SDOR). One of the primary issues regarding the SDOR is the catalyst material, thus the comparative investigation of the performance of platinum and gold in the SDOR, as found in this study. Ultimately, the SDOR could lead to an effective way of producing hydrogen gas, which is an excellent energy carrier. The electrochemical application of the oxygen reduction reaction (ORR) and ethanol oxidation reaction (EOR) is an integral part of the catalytic process of water electrolysis, and by using fuel cell technology, it becomes even more relevant to this study and can therefore be used as a control, guide and introduction to the techniques required for electrochemical investigation of catalyst effectiveness. Subsequently, the EOR as well as the ORR was used as introduction into the different electrochemical quantification and qualification techniques used in the electrochemical analyses of the SDOR. Considering the ORR, gold showed no viable activity in acidic medium, contrarily in alkaline medium, it showed good competition to platinum. Gold also lacked activity towards the EOR in acidic medium compared to platinum, with platinum the best catalyst in both acidic and alkaline media. Ultimately, platinum was established to be the material with better activity for the ORR with gold a good competitor in alkaline medium, and platinum the better catalyst for the EOR in both acidic and alkaline media. With the main focus of this study being the SDOR, gold proved to be the best catalyst in salt and gaseous forms of SO2 administration compared to platinum when the onset potential, maximum current density, Tafel slope and number of electrons transferred are taken into consideration. The onset potential was determined as 0.52 V vs. NHE for both platinum and gold using SO2 gas and 0.54 V and 0.5 V for gold and platinum respectively, using Na2SO3 salt. The maximum current density using gaseous SO2 for platinum at 0 RPM was 400 mA/cm2 with a Tafel slope of 891 mV/decade whereas gold had a maximum current density of 300 mA/cm2 and a Tafel slope of 378 mV/decade. Using Na2SO3 salt, the maximum current density of gold was 25 mA/cm2 with a Tafel slope of 59 mV/decade whereas platinum only achieved 18 mA/cm2 with a Tafel slope of 172 mV/decade. Concerning the number of electrons transferred, gold achieves a transfer of 2 while platinum only 1 for both SO2 gas and Na2SO3 salt. Taking all these summarised determinations into account, gold was established to be a very competitive catalyst material for the SDOR, compared to platinum. / MSc (Chemistry), North-West University, Potchefstroom Campus, 2015

The main aim of the work reported is the design of proof-of-concept of at point-of-use hydrogen peroxide electrogeneration from air. The experimental work discussed within this thesis explores five major areas: the kinetics of electrocatalysis, ion-pairing, change of solvent media, the electrode surface modication by a redox mediator, and the electrochemical reduction of oxygen within enhanced mass transport systems. The electrocatalytic rates and mass transport of two oxygen reduction redox meditors, viz. anthraquinone and methyl viologen, are studied in aqueous solutions. The investigation is facilitated through the use of a boron-doped diamond electrode, allowing the catalytic response to be clearly delineated from that of the direct oxygen reduction process. The use of simulation software is highlighted in combination with experimental voltammograms to extract kinetic data. Specifically, the voltammetric features, such as the `reverse' peak and the `split waves', are given particular attention. Consequently, it is possible to deconvolute the electrocatalytic reaction mechanisms. The reactivity of the viologen radical cation is comparable to the semiquinone radical anion in aqueous solution ((4.8~6)x10^9 M^-1 s^-1), but over a far wider pH range (pH 2.5 - pH 8.5). The change of local proton concentration, and sequential electron transfers play key roles here. Moreover, the reduced reactivity of semiquinone is observed upon formation of ion-pairs with tetrabutylammonium cations in alkaline solutions. The electro-reduction of oxygen and its mediated pathways are also investigated in non-aqueous media; in particular the thermodynamics, the kinetics, and mass transport involved in these processes. Through a variable temperature study in electrolytic acetonitrile solution, the oxygen dissolution is quantitatively shown to be an endothermic process. Moreover, the diffusion coeficients and concentration of oxygen upon change of acetonitrile mole fraction is also explored in water-acetonitrile mixtures. The rates of bimolecular reactions are extracted from simulation programs, involving semiquinone in anhydrous acetonitrile and viologen radical cation in ethanol, and show a 3 - 4 orders of magnitude reduction compared to that in aqueous solution. Although the solubility of oxygen is ca. 6 - 8 times larger in non-aqueous solvents, the much reduced homogeneous rates limit the electrogeneration of hydrogen peroxide in pure organic media. Novel surface modification methodologies for graphitic surfaces with covalently attached anthraquinonyl groups are studied and characterised. The anthraquinonyl-modified carbon surfaces show much reduced overpotentials required for oxygen reduction. In the final chapter, utilising the new surface modification methodology and novel designs, two gravity-feed flow cells for electrochemical reduction of oxygen in aqueous solutions are proposed and characterised, one based upon the tubular electrode geometry. The other exhibits much enhanced current conversion by using a porous reticulated vitreous carbon electrode. The latter may provide a prototype hydrodynamic system to produce dilute hydrogen peroxide solution at point-of-use.

O dióxido de manganês (MnO2) é um catalisador eficiente de baixo custo utilizado no cátodo de baterias do tipo metal-ar e células a combustível alcalinas, sendo capaz de promover a redução completa de oxigênio pela rota 4e-. No entanto, o dióxido de manganês é um semicondutor e só pode ser utilizado como material eletródico nos dispositivos mencionados se combinado com algum suporte condutor. O suporte condutor mais utilizado para este fim é o carbono em pó. Entretanto, este material não possui estabilidade suficiente nas condições operacionais das células alcalinas, sendo convertido gradativamente em CO2. Uma das possíveis estratégias para tentar minimizar esta deficiência é incrementar a condutividade eletrônica do óxido puro pela dopagem com alguns cátions metálicos. Sendo assim, este trabalho tem como objetivo geral pesquisar de maneira sistemática o efeito da dopagem de dióxido de manganês com alguns cátions metálicos, como o Bi3+e Ce4+ nas propriedades físico-químicas e eletrocatalíticas deste óxido, visando o uso dos mesmos como em cátodos de baterias recarregáveis do tipo Zn-ar. As análises das características morfológicas dos catalisadores por meio de MEV e TEM mostram que os óxidos de manganês são gerados na forma de nano-bastões de 50 a 100 nm de comprimento. Os óxidos puros e dopados com bismuto e cério apresentam estruturas tetragonais típicas, ocorrendo expansão da célula unitária dos óxidos dopados pela troca de íons manganês pelos correspondentes dopantes na rede cristalina de MnO2. Os resultados eletroquímicos sugerem um aumento de condutividade do óxido dopado que possibilita seu uso sem mistura com carbono. Além disso, observa-se que a RRO é catalisada por um mecanismo que envolve a transferência de 4e- nestes materiais com participação de peróxido como intermediário. O óxido de manganês dopado com Bi apresentou promissor desempenho catalítico para a RDO, o que junto com os demais resultados apresentados para a RRO o qualificou a funcionar como o catalisador bifuncional mais promissor de todos os estudados em baterias do tipo metal-ar. Experimentos realizados em mini baterias do tipo Zn-ar demonstraram a total capacidade do catalisador dopado com bismuto operar como catalisador do eletrodo de ar, resultando num desempenho superior ao de um catalisador convencional de MnO2/C. / Manganese dioxide is at the same time an efficient and low-cost material used as cathode catalyst in the air electrode of metal-air and alkaline fuel cells, capable to promote the complete reduction of oxygen thru the 4e- mechanism. However, manganese dioxide is a semiconductor and can be used as electrodic material in the mentioned devices only combined with a conductor support. High surface area carbon powder is the most commonly used material for such purpose. The problem is that carbon suffers from severe instabilities in the experimental conditions that fuel cells and metal-air batteries operates, being gradually converted into CO2. A possible strategy to overcome or at least minimize the low oxide conductivity is by doping this material with some metallic cations. In this sense, the main purpose of this work was the systematic investigation of the physicochemical and electrocatalytic properties of Bi3+ and Ce4+ doped manganese dioxide materials used as cathode catalysts in the air electrode of alkaline type Zn-air batteries. The morphologic characterization performed SEM and TEM revealed that pure as well cation doped MnO2 are formed as poly dispersed nanorods with 50-100 nm length. Both pure and doped materials presented typical tetragonal structures, although a cell expansion was observed in the doped oxides caused by the exchange of some manganese cations by the doping counter parts. Electrochemical results suggest that a material with increased conductivity results from the doping process, allowing it to operate as air catalyst without the use of a carbon support. Besides, it is observed that the oxygen reduction reaction proceeds thru the 4e- mechanism on the doped oxides involving hydrogen peroxide as intermediate. The Bi doped oxide presented the best performance for the oxygen evolution reaction among all catalysts investigated. This result together with the superior performance for the oxygen reduction reaction presented by this material suggest that Bi doped MnO2 is a potential candidate to operate as an air catalyst of rechargeable alkaline metal-air batteries. Experiments conducted in a mini Zn-air battery using Bi doped MnO2 as air catalyst corroborated this observation.

Os componentes do conjunto membrana/eletrodos (MEA) das células a combustível de membrana de eletrólito polimérico/Polymer Electrolyte Membrane Fuel Cells (PEMFC) são sensíveis a impurezas, as quais podem vir do ar, do gás combustível e/ou da degradação dos componentes do módulo. Amônia, sulfeto de hidrogênio e monóxido de carbono são juntos os três principais subprodutos cotaminadores nos processos de geração de hidrogênio por reforma de combustíveis. Estes contaminadores afetam negativamente o desempenho das PEMFCs, assim é importante o entendimento destes efeitos para mitigá-los e introduzir a tecnologia das PEMFCs no mercado consumidor. Desta forma experimentos foram realizados visando diagnosticar os efeitos da amônia e do sulfeto de hidrogênio sobre os componentes do MEA das PEMFCs. Para a contaminação por sulfeto de hidrogênio foi provado, utilizando-se da técnica de cromatografia gasosa e de stripping, que a contaminação ocorre através da interação química e eletroquímica do contaminador com a superfície do catalisador de platina, e que estas interações ocorrem via um processo dissociativo e um processo oxidativos respectivamente. Estes processos de interação geram enxofre adsorvido sobre a superfície da platina, a qual é bloqueada para posterior oxidação de hidrogênio, gerando sobrepotenciais que reduzem a diferença de potencial da célula. Utilizando-se da técnica de cromatografia gasosa e agora de voltametria cíclica foi mostrado na PEMFC, que durante o processo de remoção do enxofre adsorvido a platina dióxido de enxofre é gerado. Ainda na PEMFC, foi mostrado utilizando-se da técnica de \"air bleed\" que maiores tolerâncias ao sulfeto de hidrogênio podem ser alcançadas, apesar de ser insignificante. Para o caso da contaminação da PEMFC por amônia, indiretamente foi mostrado, utilizando-se técnicas eletroquímicas solução de ácido perclórico, que amônia pode afetar a reação de redução de oxigênio pela sua adsorção sobre a superfície do catalisador, ou pelo bloqueio da mesma para posterior adsorção/redução de oxigênio. Em estudos de absorção de água e condutividade de membranas de NafionTM, sob diferentes frações catiônicas (prótons/amônio), em contato com água na fase vapor sob diferentes atividades, foi mostrado que quanto maior a concentração de íons contaminadores no eletrólito menor a quantidade de água absorvida e menor a condutividade da membrana. Também foi mostrado que se tais membranas fossem usadas como eletrólito em PEMFCs, o desempenho da célula seria afetado drasticamente por perdas ôhmicas. Também foi mostrado que sob contaminação por amônia, PEMFCs sofrem aumentos em resistências ôhmicas devido a reduções na condutividade do eletrólito, contudo foi provado que esta representa menos de dez por cento do total de perdas observadas no desempenho da célula. Desde estudo foi concluído que amônia afeta o desempenho das PEMFCs principalmente pela redução na atividade dos prótons na camada catalítica catódica, que causa reduções no potencial misto de equilíbrio da reação de redução de oxigênio, e portanto na diferença de potencial da célula. Finalmente foi provado indiretamente que amônia deixa a célula através do equilíbrio de amônio com água, o qual deslocado gera amônia, a qual deixa a célula junto com o fluxo de gás cotódico. / The Membrane Electrode Assembly components of a PEMFC are sensitive to impurities, which can came with the air or hydrogen stream, or from the degradation of the stack components. Ammonia, hydrogen sulfide and carbon monoxide are together the main sub-products of fuel reforming processes for generating hydrogen. These contaminants negatively affect the PEMFC performance, so it is important to understand what those effects are in order to mitigate them and introduce PEMFC technology in the mass market. Therefore, experiments were carried out to diagnose the effects hydrogen sulfide and ammonia have on the MEA components of PEMFCs. For contamination by hydrogen sulfide it was proved utilizing EMS and stripping techniques that the poisoning process happens by chemical and electrochemical interactions of the contaminant with the Platinum catalyst surface, and that these interactions happen by a dissociative and oxidative process, respectively. Those processes generate sulfur adsorbed on the Platinum surface, which blocks it for further hydrogen oxidation, generating overpotentials, which reduce the cell potential. Utilizing the EMS and now the cyclic voltammetry technique it was shown that during the process of removing sulfur from the Platinum surface one generates sulfur dioxide. Using the Air Bleed technique it was shown that higher tolerances of the PEMFC against hydrogen sulfide can be reached, despite being insignificant. For contamination of the cell by ammonia it was indirectly proved utilizing electrochemical techniques in perchloric acid solutions that ammonia can affect the oxygen reduction reaction by adsorbing on the catalyst surface, or by blocking the surface for further oxygen adsorption/reduction. Studying water uptake and ionic conductivity of Nafion membranes under many different cation fractions (proton/ammonium) in contact with water vapor at different temperatures and water activities, it was proved that the more ammonium one has in the membrane the less will be the water uptake and ionic conductivity of it. It was also shown that if those membranes were used as electrolyte in PEMFC the cell performance would be severely affected by ohmic losses. It was also shown that under ammonia exposure PEMFCs suffer by ohmic resistance increases due to the lowering in the ionic conductivity of the electrolyte, however it was proved that it represent less than ten percent of the observed losses in the cell performance. From this study it was concluded that ammonia mainly affect the PEMFC performance by lowering the cathode catalyst layer proton activity, which lowers the oxygen reduction reaction equilibrium potential, and then the cell potential. Finally it was indirectly proved that ammonia leaves the cell by the equilibrium of ammonium and water, which dislocated generates ammonia that leaves the cell together with the cathode gas stream.

Este trabalho teve como objetivo investigar eletrocatalisadores de baixo custo à base de carbeto de tungstênio, carbono e ferro submetidos a diferentes processos de nitretação quanto à atividade catalítica para reação de redução do oxigênio (RRO) nos eletrólitos ácido e alcalino. Os catalisadores foram divididos em três séries distintas, a primeira compreendendo aqueles onde houve variação da carga de carbeto de tungstênio em relação ao suporte de carbono, que foram impregnados com o complexo Fe2+(2,4,6-Tris(2-piridil)-1,3,5-Triazina)2, [Fe(TPTZ)2]2+ e tratados em duas temperaturas diferentes, 700 e 800 oC em atmosfera de nitrogênio. Na segunda série foi mantida constante a carga de carbeto de tungstênio (30% de W/C, m/m) sendo que esta mescla foi preparada usando carbonos dopados previamente com três fontes distintas de nitrogênio (HNO3, NH3 e HNO3/NH3); isto foi seguido pela incorporação do complexo Fe[TPTZ]2+ e pelos mesmos tratamentos térmicos acima mencionados. Na terceira série, os eletrocatalisadores foram preparados com três tipos de carbonos (Vulcan, Ketjenblack e Monarch), aos quais foi incorporado o complexo Fe[TPTZ]2+, seguido pelo tratamento térmico a 800 °C em atmosfera de nitrogênio e então por dopagem com amônia a 950 °C. As três séries de eletrocatalisadores sintetizados neste trabalho foram cuidadosamente caracterizadas por espectroscopia infra-vermelho e UV-Visível, difratometria de raio-x, microscopia eletrônica de transmissão, energia dispersiva de raios-x, espectroscipia Raman, espectroscopia fotoeletrônica de raios-x. As investigações eletroquímicas foram realizadas por voltametria cíclica (VC) e pelo levantamento de curvas de polarização de estado estacionário para a RRO, usando a técnica de eletrodo de disco/anel rotatório, com materiais catalíticos formando filmes finos depositados no eletrodo de disco. Nas três séries de catalisadores foram desenvolvidos materiais com bom desempenho para a RRO. Nos estudos da primeira série de catalisadores, notou-se que o material mais ativo foi aquele formado por WC-FeNx/C com 30 % de W/C e 5% de Fe pirolisado a 800 °C. Na segunda série foi observado que os desempenhos dos catalisadores variaram de acordo com o tipo de protocolo de nitretação, presença de ferro e temperatura de tratamento térmico. Em eletrólito alcalino, os eletrocatalisadores apresentaram maiores desempenhos, que resultaram bastante próximos em relação ao do catalisador de Pt dispersa em carbono usado como referência. Na terceira série de eletrocatalisadores investigados, verificou-se que o melhor desempenho obtido foi com o catalisador com carbono Monarch com amônia, cuja atividade catalítica resultou superior à dos demais, devido ao maior número de estruturas ativas FeNx e N/C formadas pelo tratamento com amônia. Os resultados nos meios ácido e alcalino para a primeira e segunda séries de eletrocatalisadores sugerem a ocorrência de um mecanismo indireto (2e- + 2e-), ou seja, em meio ácido (alcalino) primeiro o O2 reduz para H2O2 (HO2 ) e depois de H2O2 (HO2 ) para H2O. Os sítios predominantemente envolvidos na catálise da reação são WC e FeNx em meio ácido e WC e N/C em meio alcalino. Finalmente, para a terceira série de eletrocatalisadores o mecanismo reacional em meio ácido envolve um mecanismo direto de 4e-, com participação importante dos sítios ativos de Fe-N2. / This work aims to investigate low cost electrocatalysts based on tungsten carbide, carbon and iron submitted to different nitriding processes for the catalytic activity for the oxygen reduction reaction (ORR) in acid and alkaline electrolytes. The catalysts were divided into three distinct series, the first one comprising those with different tungsten carbide loads with respect to the carbon support, which were impregnated with the Fe2+ (2,4,6-Tris (2-pyridyl) - 1,3,5-triazine)2, [Fe (TPTZ)]2+, complex and treated at two different temperatures, 700 and 800 oC in nitrogen atmosphere. In the second series, the tungsten carbide load (30% W/C, m/m) was kept constant but this mixture was prepared using previously doped carbons using three different sources of nitrogen (HNO3, NH3 and HNO3/NH3); this was followed by the incorporation of the Fe[TPTZ]2+ complex and by the same heat treatments as mentioned above. In the third series, the electrocatalysts were prepared with three carbon types (Vulcan, Ketjenblack and Monarch), to which the Fe[TPTZ]2+ complex was added, followed by heat treatment at 800 °C under nitrogen and then by nitriding using a flow of ammonia at 950 °C. The three series of electrocatalysts synthesized in this work were carefully characterized by infra-red and UV-Visible spectroscopy, x-ray diffraction, transmission electron microscopy, x-ray energy dispersive, Raman spectroscopy, x-ray photoelectron spectroscopy. The electrochemical investigations were performed by cyclic voltammetry (CV) and by measurements of steady-state polarization curves for ORR using rotating ring-disc electrode technique, with catalytic materials forming thin films deposited on the disc. In the three catalyst series, materials with good performance for the ORR were developed. In the studies of the first series of catalysts, it was seen that the most active material was that formed by WC-FeNx/C with 30%W/C and 5% Fe pyrolyzed at 800 ° C. In the second series it was observed that the performances of the catalysts varied according to the type of nitriding protocol, presence of iron and temperature of heat treatment. The electrocatalysts showed higher performances in alkaline electrolyte, which were very close to that of a reference Pt/C catalyst. In the third series of electrocatalysts, the best performance was obtained with the Monarch carbon catalyst heat-treated with ammonia, whose catalytic activity was higher than all others, due to the greater number of FeNx and N/C active structures formed by the treatment with ammonia. The results in acidic and alkaline conditions for the first and second series of electrocatalysts suggest the occurrence of an indirect ORR mechanism (2e- + 2e-), that is, in acid (alkaline) media first O2 is reduced to H2O2 (HO2) followed by the reduction of H2O2 (HO2). The active sites predominantly involved in the reaction electrocatalysis are WC and FeNx in acid media and WC e N/C in alcaline media. Finally, for the third series of electrocatalysts, the acidic reaction involves a direct 4e- mechanism, having important participation of the Fe-N2 active sites.