No description available.

京都大学 / 新制・課程博士 / 博士(理学) / 甲第23026号 / 理博第4703号 / 新制||理||1674(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 北川 宏, 教授 吉村 一良, 教授 有賀 哲也 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

Bibliography: pages 117-120. / A series of para-phenyl substituted N,N-dialkyl-N'-benzoylthioureas where para-phenyl substituents are H, Cl, Br, I, NO₂ and OCH₃ and alkyl chains are -CH₂CH₃, -(CH₂)₃CH₃ and and -CH₂C₆H₅ as well as their corresponding neutral bis complexes of type cis [ML₂] where M = Pd(II) and Pt(II) have been prepared and characterized. The structures of these compounds has been studied using high resolution nuclear magnetic resonance technique. Studies were also carried out to investigate possible use of these N,N-dialkyl-N-benzoylthioureas as ligands suitable for the chromatographic separation of Pt(II), Pd(II), Ni(II) and Cu(II). To this end the possible selective extraction of these complexes from acidic aqueous phases was examined. This layer normal phase chromatography has been mainly used, using a variety of organic phases as eluent. A preliminary investigation of the suitability of using normal phase HPLC for the separation of the platinum and palladium complexes was undertaken.

Cross coupling reactions are a well-established tool in modern organic synthesis and play a crucial role in the synthesis of a high number of organic compounds. Their importance is highlighted by the Nobel Prize in chemistry to Suzuki, Heck and Negishi in 2010. The increasing importance of sustainability requirements in chemical production has furthermore promoted the development of cross-coupling protocols that comply with the principles of “Green Chemistry”1. The Sonogashira reaction is today the most versatile and powerful way to generate aryl alkynes, a moiety recurring in many pharmaceutical and natural products. Despite many improvements to the original reaction, reports on generally applicable protocols that work under sustainable conditions are scarce. Our group recently reported an efficient protocol for a copperfree Sonogashira cross-coupling at low temperature, in aqueous medium and with no addition of organic solvents or additives2. The goal of this work was to further investigate the effects of different reaction parameters on the catalytic activity in order to optimize the protocol. Limitations of the protocol were tested in respect to reaction temperature, heating method, atmosphere, base type and amount, catalyst loading, reaction time and work up procedure. The reaction worked successfully under air and results were not affected by the presence of oxygen in the water phase. Among a variety of bases tested, triethylamine was confirmed to give the best results and its required excess could be reduced from nine to four equivalents. Catalyst loading could also be reduced by up to 90%: Good to near quantitative yields for a broad range of substrates were achieved using a catalyst concentration of 0.25mol% and 5 eq of Et3N at 50°C while more reactive substrates could be coupled with a catalyst concentration as low as 0.025mol%. Filtration experiments showed the possibility of a simplified work up procedure and a protocol completely free of organic solvents. This optimized protocol can be applied to a broad range of substrates, delivers high yields, avoids formation of toxic byproducts, works under air and aqueous conditions, allows for simple product isolation and thus meets not only the criteria of “Green Chemistry” but also those of “Click-Chemistry”

京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第18097号 / 理博第3975号 / 新制||理||1573(附属図書館) / 30955 / 京都大学大学院理学研究科化学専攻 / (主査)准教授 依光 英樹, 教授 丸岡 啓二, 教授 大須賀 篤弘 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第18521号 / 工博第3913号 / 新制||工||1601(附属図書館) / 31407 / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 辻 康之, 教授 大江 浩一, 教授 近藤 輝幸 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第21442号 / 理博第4435号 / 新制||理||1637(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 北川 宏, 教授 竹腰 清乃理, 教授 吉村 一良 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

No description available.

No description available.

This study focused on improvement of electroless plating methods by use of particular bath additives. The techniques developed here can enable us to plate very thin layers selectively on a nonconductive substrate and thus create metallized features on a nanoscale. Through the development of such bottom-up techniques this work contributes a key technology to achieving self-assembled nanocircuits. The use of additives in an electroless plating environment can modify the barriers to nucleation (or seeding) and growth. Two additives, namely 3-mercapto-1-propanesulfonic Acid (MPS) and 1,3-propanedisulfonic acid (PDS), notably increased the selectivity of electroless metallization on chemically modified surfaces, which can be used to create patterned structures. More specifically, the additives increased the growth rate of metal on an aminosilane-coated surface relative to an uncoated surface. This work includes an examination of metal layer thickness and conductivity in addition to selectivity. The layer thickness was determined through the use of atomic force microscopy on surfaces that exhibited conductivity. The conductivity of the surface metal was determined through a measurement on a four-point probe measurement. In this series of experiments, the disulfonate-containing additive PDS provided the highest nucleation density, highest conductivity and the best selectivity ratio. The palladium metal deposit on the PDS-treated surface was nearly uniform in height and its conductivity approached the bulk conductivity of palladium with a metal height of less than 30 nm. MPS-treated surfaces also provided increased nucleation density when used during the seeding step, but the resulting conductivity was less than that of the PDS treated samples. We recommend the use of PDS as an effective electroless plating additive for use in palladium electroless plating processes.