International Telemetering Conference Proceedings / October 25-28, 1993 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Two different types of tracking feeds are currently used in the majority of telemetry tracking antenna systems when autotrack operation is required. They are of the conical scanner or of the single channel monopulse family and they employ well known technologies. In broadband applications, these feeds all suffer from the same inherent degradation in efficiency caused by their inability to maintain a constant crossover loss value and by their failure to properly illuminate the reflector. In high dynamics situations they can also generate unwanted and sometimes detrimental modulation whenever on-axis tracking is not maintained. In addition, currently available versions of the conical scanner are not capable of high scan rates or of scan rate agility and they are ill-suited for use in tracking systems based on non-orthogonal axes positioners. This paper describes a new high efficiency tracking feed system based on proven conical scanner technology. Its design incorporates features such as variable crossover, steerable beam, high scan rates, scan rate agility as well as stable reference coordinate system. In addition to these features, this new feed is also capable of delivering, in all but one operational category, levels of performance superior to that achievable to date by any other implementation of the conical scanner or of the single channel monopulse technology.

Italian Trap Allochthon is a rare upper-plate exposure of Paleozoic metasedimentary and Precambrian to Tertiary crystalline tectonites in the Santa Catalina-Rincon metamorphic core complex. Elsewhere in the complex, metasedimentary tectonite is usually restricted to an autochthononous position. The internal structures of the allochthon consist of numerous low-angle faults, tear faults, and overturned asymmetric and upright folds. Close association of the low-angle faults and asymmetric folds, and vergence of the folds, indicates that these folds were formed during westward transport along the low-angle faults. The structures of the allochthon are truncated and rotated to the northeast by a listric (?) normal fault. The probable shape of the fault surface, together with the northeastward rotation of the internal structures, suggests translation of the allochthon from the northeast to the southwest. The fact that metasedimentary tectonites are found in upper- plate position indicates that the listric (?) normal faulting post-dates the metamorphism of the Paleozoic and Mesozoic strata. Metamorphism in turn was part of the development of the Santa Catalina-Rincon metamorphic core complex. It is inferred that the Italian Trap Allochthon was emplaced in the final stages of profound regional extension which prevailed during the mid-Tertiary in southern Arizona.

The effectiveness of interest rate pass-through is crucial when shaping monetary policy. In this paper we use error correction framework in order to estimate the speed and the completeness of pass through in Slovakia. Our thesis brings a unique research on how the financial crisis and Euro adoption affect the pass-through. In Slovakia those events occur at the same time; we attempt to distinguish between what phenomenon has greater impact. We also distinguish between what bank characteristics have impact on individual bank's spread during financial crisis. Our results suggest that the interest rate pass-through completeness increases in long term. We however found evidence of decreasing pass-through in case of deposit rates during crisis. Banks are unwiling to lower them and hence harm their competitve position. The pass-through in Slovakia is found to be relatively fast and consistent throughout periods. With the crisis, the speed for mortgages rates however decreases. We conclude that the impact of financial crisis outweights the impact of Euro adoption. Concerning the banks' characteristics, we conclude that higher portion of loans on assets, higher costs over income and better liquidity position decrease the spread. This is explained by the size of Slovakian banking market; banks lower their spread to...

This thesis analyzes the incomplete exchange rate pass-through effect on Mongolian economy and its implication on monetary policy under foreign and domestic shocks. The analysis is carried out in a small open economy New Keynesian DSGE model proposed by Monacelli (2005), where incomplete exchange rate pass-through is introduced via nominal rigidities on import prices. In order to accomplish the goal, we firstly derive the solutions of the model, calibrate the parameters, and finally simulate the impulse responses. Moreover, SVAR estimation is achieved to estimate the pass-through. Four main results are obtained. First, the exchange rate pass-through into import price and inflation is 0.69% and 0.49% respectively in short run, implying incomplete pass-through in Mongolia. Second, the exchange rate acts as a shock absorber for domestic productivity and foreign demand shock, but as a shock amplifier for domestic demand shock. Third, in case of incomplete pass-through the central bank of Mongolia is required to adjust the nominal interest rate more under the productivity shock, but less for the domestic and foreign demand shock. Finally, deviations from the law of one price contributes considerably to the variability of the output gap under the low pass-through. Therefore, considering incomplete pass-through in...

Thesis is focused on a combination game of football as a way of consecutive offensive and also on the way of defending in this game style. It is based on both theoretical sources and original research conducted in the club SK Slavia Prague and also on the analysis of Champions League matches from year 2011. The outcomes of this thesis will be found in use as a source of information for practice trainers. Key words: Football, combination, offensive phase, defending, pass

In this thesis, a new traction stress based method for characterizing shear strength is investigated by carrying out a series of shear strength tests. The AWS method for the calculation of shear strength shows significant discrepancies between longitudinal and transverse specimens. The main purpose of this new traction based definition for shear strength is to demonstrate that there exists a single shear strength value regardless of specimen geometry and loading conditions. With this new approach a better correlation between shear strength values for transverse and longitudinal specimens is achieved. Special issues occur with the multi-pass welds in regards to the failure angle. The AWS equation does not account to different failure angles of the specimens, it only assumes 45o failure angle in all the cases, but the new approach takes into account the different failure angles. Finally with this method a quantitative weld sizing can be achieved for fillet welds.

West Belle Pass Barrier is a barrier spit that formed during the last delta lobe progradation associated with the Lafourche delta complex. Located on the western flank of the Caminada-Moreau Headland, West Belle Pass Barrier and Raccoon Pass are located downdrift of the Belle Pass jetties. Morphological changes stemming from storms, jetty infrastructure, and an expanding tidal inlet are evaluated using historical shoreline data and imagery. Littoral transport around the jetties combined with inlet growth created a framework wherein sediment is transported through Raccoon Pass and sequestered as a flood-tidal delta. These events aided in the landward migration of West Belle Pass Barrier, which ultimately loaded and consolidated previously unconsolidated facies. A conceptual model illustrating the primary consolidation of backbarrier facies resulting from washover deposits during one storm is presented. The primary consolidation settlement associated with loading near-surface, water-saturated backbarrier facies is substantially larger than current subsidence rates.

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

We analyze the pass-through of cost changes to retail tariffs in the German electricity market over the 2007-2014 period. We find an average pass-through rate of around 60%. This significantly varies with demand factors: while the pass-through rate to baseline tariffs, where firms have greater market power because customers are less willing to switch, is only 50%, it increases to 70% in the competitive segment of the market. Although the pass- through rate of independent firms is significantly higher than that of other firms in the competitive market segment, the extent of supply-side heterogeneity is limited. Thus, the firms' ability to exercise market power and reduce pass-through appears to be constrained by competition and largely determined by demand side factors. Finally, we find that the pass-through rate in the competitive market segment has been approaching unity over the past years, indicating a rise in competitive pressure.

O objetivo deste estudo foi investigar a aprendizagem do passe do rúgbi com base na prática de diferentes estruturas funcionais. Os participantes foram 31 indivíduos de ambos os sexos, entre 18 e 30 anos de idade, sem experiência com o rúgbi. O delineamento envolveu três grupos experimentais: 2 vs. 0, 1 + 1 vs. 1 e 2 vs. 1. A fase de aquisição foi realizada em três dias com a execução de 60 tentativas do passe para o lado direito e 60 tentativas para o lado esquerdo. A fase de transferência foi realizada no último dia com a execução de 20 tentativas. O desempenho foi acessado por meio das seguintes medidas: (i) direção do passe, (ii) precisão do passe, (iii) direção da corrida, (iv) zona do passe e (v) desempenho global. Estas medidas foram calculadas através de um índice de desempenho considerando a taxa de sucesso em blocos de 10 tentativas. Os resultados mostraram que o grupo 1 + 1 vs. 1 foi o único que melhorou o desempenho global na fase de aquisição e o manteve no teste de transferência. Este grupo também foi o único que mostrou melhora em relação à direção e precisão do passe. E, em conjunto com os demais, o fez em relação à direção da corrida. Por outro lado, verificou-se que o grupo 2 vs. 0 piorou os desempenhos relativos à precisão à zona do passe e de passe.Pode-se concluir que a estrutura funcional 1 + 1 vs. 1 possibilitou a aprendizagem do passe do rúgbi / The aim of this study was to investigate the learning of rugby passing based on the practice of different functional structures. Participants were 31 individuals of both sexes, between 18 and 30 years of age, with no experience with rugby. The design involved three experimental groups: 2 vs. 0, 1 + 1 vs. 1 and 2 vs. 1. The acquisition phase was carried out in three days with the performance of 60 trials of passing to the right side and 60 trials to the left side. The transfer phase was held in the last by performing 20 trials. Performance was accessed through the following measures: (i) passing direction, (ii) passing accuracy, (iii) running direction, (iv) passing zone and (v) overall performance. These measures were calculated by a performance index considering the success rate in a 10-block trial. Results showed that the group 1 + 1 vs. 1 was the only one that improved overall performance in the acquisition phase and kept it in the transfer test. This group was also the only one that showed improvement in relation to the direction and accuracy of passing. In addition, along with the others, it did so in relation to the running direction. On the other hand, it was verified that the group 2 vs. 0 worsened performances related to accuracy and zone of passing. It was concluded that the functional structure 1 + 1 vs. 1 made it possible the learning of rugby pass