Although the benefits of ICP-MS are well documented, the determination of analytes at low levels in high concentrations of matrix elements has proved difficult. As ICP-MS is a 'flow into' instrument the deposition of salts throughout the system is a common cause of significant loss of signal. The application of desolvation of aluminosilicate samples, to aid in the production of more robust plasma conditions, was investigated to increase the efficiency of the ICP in processing the sample. The performance of the ICP-MS was monitored with different cone arrangements and by running the skimmer cones at elevated temperatures. An alternative to modification of the instrument is to employ chemical modification of the sample and hence the separation of Au and Pt from an aluminosilicate matrix via the use of solid phase extraction (SPE) columns were investigated as a means of dealing with high levels of dissolved solids. OVB based SPE columns were found to give high retentions of Au and Pt when chelated with ammonium pyrrolidinediethylcarbamate (APOC). A second alternative that avoided digestion of the aluminosilicate matrices, was to carry out the analysis using laser ablation (LA). LA-ICP-MS is becoming increasingly used for trace elemental analysis but as yet no universal calibration method is available. The general problems associated with matrix matched standards are inherent as the ablation mechanism and plasma conditions can differ dramatically with very small changes in matrix composition. Hence the addition of chromophores was employed to increase the absorption of the laser energy. The use of vanillic, nicotinic and pyrazinoic acid were used to improve the ablation of pressed powder discs at the laser wavelength of 213 nm. Synthetic aluminosilicate discs and standard additions were both employed for the calibration and determination of Ti.

Diss. (sammanfattning) Uppsala : Uppsala universitet, 2008. / Härtill 5 uppsatser.

Made available in DSpace on 2014-10-09T12:43:15Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:56:08Z (GMT). No. of bitstreams: 1 06477.pdf: 5155491 bytes, checksum: 44155d466a1c3a4a47a6da7fad6a1eb0 (MD5) / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Made available in DSpace on 2014-10-09T12:43:48Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:56:09Z (GMT). No. of bitstreams: 1 06773.pdf: 7313261 bytes, checksum: afb0bc00fde188a0f75b9462245bb12d (MD5) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Les produits déshydratés permettent d’optimiser la conservation et le transport des aliments. Les poudres alimentaires distribuées au consommateur affichent des garanties nutritionnelles en termes d’apports qualitatif et quantitatif. Cependant, l’apport nutritionnel du produit après reconstitution et cuisson, n’est pas garanti. Ce travail se concentre sur l’évaluation des pertes en vitamines dues aux procédés de transformation alimentaire en lien avec l’effet de la matrice alimentaire. Ces pertes mesurées après le traitement thermique ne sont pas négligeables, rendant l’encapsulation nécessaire pour répondre à l’objectif de la thèse de garantir une teneur en vitamines suffisante après reconstitution et traitement thermique du produit alimentaire déshydraté. Différentes matrices ont été testées à l’échelle laboratoire et industrielle. Parmi ces matrices, certaines comme les protéines laitières et l’amidon se sont avérées très intéressants et ont permis la préservation de la vitamine C du traitement thermique. Pour finaliser l’étude, il a été indispensable de prendre en compte le stockage des poudres de la vitamine C encapsulée avant et après leur commercialisation. Pour assurer leur teneur suffisante en vitamine C lors ce stockage, un vieillissement accéléré a été effectué. Cette thèse a permis d’apporter des réponses concrètes au problème industriel posé, qui était de garantir la teneur en vitamine C des produits commercialisés après reconstitution et traitement thermique / Dehydrated products make it possible to optimize the storage and transport of food products. Food powder mixes distributed to the consumer display nutritional guarantees in terms of qualitative and quantitative inputs. However, the nutritional value of the product after reconstitution and cooking, is not guaranteed. This PhD work focuses on the evaluation of vitamins losses due to food processing in relation to the effect of the food matrix. Losses measured after the heat treatment were not negligible, making the encapsulation necessary to meet the objective of the thesis to guarantee a sufficient vitamins content after reconstitution and heat treatment of the dehydrated food product. Different matrices have been tested at the laboratory scale and industrial scales. Some of these matrices, such as dairy proteins and starch, have proved to be very interesting and allowed the preservation of vitamin C during heat treatment. To finalize the study, it was essential to take into account that the vitamin C-encapsulating powders will be stored before and after their distribution. To ensure that they maintain a sufficient vitamin C content during storage, accelerated aging has been carried out. Thus this thesis made it possible to provide concrete answers to the posed industrial problem, which was to guarantee the vitamin C content of the commercial products after reconstitution and heat treatment

Pós fluxantes são escórias sintéticas utilizadas no processamento do aço via lingotamento contínuo com o objetivo de promover maior qualidade superficial ao produto lingotado. Para tanto, os pós fluxantes desempenham as seguintes funções: (i) promoção do isolamento térmico e químico do aço, (ii) absorção das inclusões nãometálicas provenientes do aço, (iii) promoção da lubrificação do molde e (iv) controle da transferência de calor entre o aço e o molde. O bom desempenho de cada função está diretamente relacionado às propriedades físicas e químicas que os pós apresentam, as quais são funções de sua composição química. Durante o processo de lingotamento, os pós fluxantes sofrem alterações em sua composição original proporcionadas por diferentes mecanismos que afetam as propriedades dos pós fluxantes. Um dos principais mecanismos responsáveis pelas alterações da composição das escórias é a interação química que ocorre entre o aço líquido e o pó fluxante fundido. Nesse trabalho foram realizadas simulações via aplicativo termodinâmico FactSage com o intuito de avaliar as interações entre metal líquido e escória. Três sistemas simples para a escória – um ternário (CaO-Al2O3-SiO2), um quaternário (CaO-Al2O3-SiO2-MgO) e um quinário (CaO-Al2O3-SiO2-MgO-Na2O) – e uma liga de Fe saturada em alumínio e oxigênio – 0,1%, 0,01% e 0,001% de Al – foram escolhidos para a realização das simulações, visando avaliar o incremento de Al2O3 da escória através da interação entre o alumínio dissolvido no ferro e a sílica presente na escória. O aumento do teor de alumina na escória foi quantificado para cada um dos três sistemas estudados em função do teor de Al e da razão S/M (kg de pó fluxante/t de metal líquido). Foram realizadas curvas de resfriamento para as escórias – que sofreram alterações em sua composição – para avaliar a influência da variação da composição sobre o comportamento de solidificação destas, baseadas em diagramas pseudobinários. Por fim, foram realizados cálculos de viscosidade para estas escórias através do modelo IRSID, para analisar a influência da composição sobre a viscosidade. Mostrou-se, para as condições escolhidas, que as alterações da composição química das escórias devido às interações entre metal líquido e escória são significativas, afetando as propriedades dos pós fluxantes, tais como seu comportamento de solidificação e sua viscosidade. / Mold powders are synthetic slags used in steel processing via continuous casting in order to promote greater surface quality to casting product. Thus, the mold powders perform the following functions: (i) promotion of the thermal and chemical insulate of steel, (ii) absorption of non-metallic inclusions from the steel, (iii) promotion of the lubrication of the mold and (iv) control of the heat transfer between steel and mold. The good performance of each function is directly related to physical and chemical properties presented by the powders, which are functions of their chemical compositions. During casting process, the mold powders undergo changes in their original composition provided by different mechanisms that affect the properties of mold powders. One of the main mechanisms responsible for changes in the composition of the slag is the chemical interaction that occurs between liquid steel and molten mold powders. In this work, simulations were carried out via thermodynamics software FactSage with the purpose of evaluating the interactions between the liquid metal and slag. Three simple systems – a ternary (CaO-Al2O3-SiO2), a quaternary (CaO-Al2O3- SiO2-MgO) and a quinary (CaO-Al2O3-SiO2-MgO-Na2O) – and a Fe alloy saturated with aluminum and oxygen – 0,1%, 0,01% and 0,001% Al – were chosen to perform the simulations in order to evaluate the increase of Al2O3 in slag through the interaction between the dissolved aluminum in iron and silica present in the slag. The increase of alumina content in the slag was quantified for each of the three systems studied as a function of Al content and the ratio S/M (mold powder kg/t liquid metal). Cooling curves were performed for slags – that suffered changes in their composition – to assess the influence of the composition variation on the behavior of slags, based on the pseudo-binary diagrams. Calculations of viscosity for these slags through the IRSID model to analyze the influence of chemical composition on the viscosity were performed. For the conditions chosen, it was shown that changes in chemical composition of the slag due to interactions between liquid metal and slag are significant, affecting the properties of fluxing powders, such as the solidification behavior and viscosity.

Pós fluxantes são escórias sintéticas utilizadas no processamento do aço via lingotamento contínuo com o objetivo de promover maior qualidade superficial ao produto lingotado. Para tanto, os pós fluxantes desempenham as seguintes funções: (i) promoção do isolamento térmico e químico do aço, (ii) absorção das inclusões nãometálicas provenientes do aço, (iii) promoção da lubrificação do molde e (iv) controle da transferência de calor entre o aço e o molde. O bom desempenho de cada função está diretamente relacionado às propriedades físicas e químicas que os pós apresentam, as quais são funções de sua composição química. Durante o processo de lingotamento, os pós fluxantes sofrem alterações em sua composição original proporcionadas por diferentes mecanismos que afetam as propriedades dos pós fluxantes. Um dos principais mecanismos responsáveis pelas alterações da composição das escórias é a interação química que ocorre entre o aço líquido e o pó fluxante fundido. Nesse trabalho foram realizadas simulações via aplicativo termodinâmico FactSage com o intuito de avaliar as interações entre metal líquido e escória. Três sistemas simples para a escória – um ternário (CaO-Al2O3-SiO2), um quaternário (CaO-Al2O3-SiO2-MgO) e um quinário (CaO-Al2O3-SiO2-MgO-Na2O) – e uma liga de Fe saturada em alumínio e oxigênio – 0,1%, 0,01% e 0,001% de Al – foram escolhidos para a realização das simulações, visando avaliar o incremento de Al2O3 da escória através da interação entre o alumínio dissolvido no ferro e a sílica presente na escória. O aumento do teor de alumina na escória foi quantificado para cada um dos três sistemas estudados em função do teor de Al e da razão S/M (kg de pó fluxante/t de metal líquido). Foram realizadas curvas de resfriamento para as escórias – que sofreram alterações em sua composição – para avaliar a influência da variação da composição sobre o comportamento de solidificação destas, baseadas em diagramas pseudobinários. Por fim, foram realizados cálculos de viscosidade para estas escórias através do modelo IRSID, para analisar a influência da composição sobre a viscosidade. Mostrou-se, para as condições escolhidas, que as alterações da composição química das escórias devido às interações entre metal líquido e escória são significativas, afetando as propriedades dos pós fluxantes, tais como seu comportamento de solidificação e sua viscosidade. / Mold powders are synthetic slags used in steel processing via continuous casting in order to promote greater surface quality to casting product. Thus, the mold powders perform the following functions: (i) promotion of the thermal and chemical insulate of steel, (ii) absorption of non-metallic inclusions from the steel, (iii) promotion of the lubrication of the mold and (iv) control of the heat transfer between steel and mold. The good performance of each function is directly related to physical and chemical properties presented by the powders, which are functions of their chemical compositions. During casting process, the mold powders undergo changes in their original composition provided by different mechanisms that affect the properties of mold powders. One of the main mechanisms responsible for changes in the composition of the slag is the chemical interaction that occurs between liquid steel and molten mold powders. In this work, simulations were carried out via thermodynamics software FactSage with the purpose of evaluating the interactions between the liquid metal and slag. Three simple systems – a ternary (CaO-Al2O3-SiO2), a quaternary (CaO-Al2O3- SiO2-MgO) and a quinary (CaO-Al2O3-SiO2-MgO-Na2O) – and a Fe alloy saturated with aluminum and oxygen – 0,1%, 0,01% and 0,001% Al – were chosen to perform the simulations in order to evaluate the increase of Al2O3 in slag through the interaction between the dissolved aluminum in iron and silica present in the slag. The increase of alumina content in the slag was quantified for each of the three systems studied as a function of Al content and the ratio S/M (mold powder kg/t liquid metal). Cooling curves were performed for slags – that suffered changes in their composition – to assess the influence of the composition variation on the behavior of slags, based on the pseudo-binary diagrams. Calculations of viscosity for these slags through the IRSID model to analyze the influence of chemical composition on the viscosity were performed. For the conditions chosen, it was shown that changes in chemical composition of the slag due to interactions between liquid metal and slag are significant, affecting the properties of fluxing powders, such as the solidification behavior and viscosity.

abstract: With the aid of metabolic pathways engineering, microbes are finding increased use as biocatalysts to convert renewable biomass resources into fine chemicals, pharmaceuticals and other valuable compounds. These alternative, bio-based production routes offer distinct advantages over traditional synthesis methods, including lower energy requirements, rendering them as more "green" and "eco-friendly". <italic>Escherichia coli</italic> has recently been engineered to produce the aromatic chemicals (S)-styrene oxide and phenol directly from renewable glucose. Several factors, however, limit the viability of this approach, including low titers caused by product inhibition and/or low metabolic flux through the engineered pathways. This thesis focuses on addressing these concerns using magnetic mesoporous carbon powders as adsorbents for continuous, in-situ product removal as a means to alleviate such limitations. Using process engineering as a means to troubleshoot metabolic pathways by continuously removing products, increased yields are achieved from both pathways. By performing case studies in product toxicity and reaction equilibrium it was concluded that each step of a metabolic pathway can be optimized by the strategic use of in-situ adsorption as a process engineering tool. / Dissertation/Thesis / Masters Thesis Chemical Engineering 2014

Le travail réalisé concerne l’étude de la fonctionnalité et des performances des poudres de mannitol en compression directe en s’appuyant sur la simulation de compression sur presse rotative comme outil d’investigations. Dans le contexte réglementaire actuel, il est important pour les industriels, fournisseurs d’excipients pharmaceutiques, d’approfondir leurs connaissances des matériaux afin de répondre aux critères de qualité des médicaments et aux exigences de l’industrie pharmaceutique. Le mannitol est un excipient très largement utilisé en formulation pharmaceutique et notamment pour la conception de comprimés. L’objectif essentiel de cette Etude vise à mieux connaître et maîtriser la qualité de cette matière première afin de pouvoir améliorer, voire optimiser ses performances en compression directe. A l’aide d’une série de tests de caractérisation physiques, physico-chimiques, mécaniques et de compression sur les poudres de mannitol, nous avons pu identifier, dans un premier temps, un certain nombre de critères qui nous ont permis d’émettre des hypothèses et d’établir des axes de travail afin d’analyser le comportement de ces poudres en compression. Les résultats obtenus ont également permis de mettre en avant, à l’aide de l’étude de la compressibilité et des modèles mathématiques associés, un mécanisme de déformation prédominant sur les poudres de mannitol de compression directe. De nombreux prototypes ont fait l’objet d’une investigation approfondie dans une seconde partie, permettant de valider ces hypothèses et d’identifier les paramètres et mécanismes responsables des performances en compression des poudres de mannitol.Globalement, les travaux de recherche conduits dans cette thèse ont permis d’améliorer les connaissances sur les performances en compression des poudres de mannitol de la société Roquette Frères dans des conditions réelles d’utilisation, semblables aux presses rotatives industrielles, et en fournissant des résultats expérimentaux validés et modélisés. / This work focuses on the study of the functionality and performance of directly compressed mannitol powder using a rotary tablet press simulator as an investigation tool. For regulatory authority, it is essential for industrial - pharmaceutical raw material suppliers, to deepen their knowledge about materials to satisfy the drug quality standards and Pharmaceutical industry requirements. Mannitol is a widely used raw material in pharmaceutical formulations for the design of tablets. The main objective of this study is to have a better control and knowledge about this raw material quality, in order to improve and optimize the performance of mannitol in direct compression.Using a series of physical, physico-chemical, mechanical and compression studies on mannitol powders, we identified some criteria that allowed us to emit hypotheses and build a line of work to analyze the powders behavior under compression. The results also allowed us - using compressibility and associated mathematical models - to study the predominant deformation mechanism of directly compressed mannitol powders. Various mannitol prototypes were studied in a second part, permitting to validate these hypotheses and identify parameters and mechanisms affecting tableting performance.Overall, the research work achieved in this thesis have improved the knowledge about compression performance of mannitol powders from Roquette Frères SA company in tablet production used conditions, similar to industrial rotary tablet press, and providing validated and modeled experimental results.

Made available in DSpace on 2014-10-09T12:46:43Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:58:36Z (GMT). No. of bitstreams: 1 08288.pdf: 2858118 bytes, checksum: 5254a04c780740482622c95ca3afa37b (MD5) / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP