This thesis describes an electrically thin surface used for electromagnetic applications in the microwave regime. The surface is free-standing and its primary purpose is to modify the phase distribution, or the phase and amplitude distribution of electromagnetic fields propagating through it: it is called phase shifting surface (PSS) in the first case, and phase and amplitude shifting surface (PASS) in the second case. For practical applications, the surface typically comprises three or four layers of metallic patterns spaced by dielectric layers. The patterns of the metallic layers are designed to locally alter the phase (and amplitude in the case of the PASS) of an incoming wave to a prescribed set of desired values for the outgoing wave. The PSS/PASS takes advantage of the reactive coupling by closely spacing of the metallic layers, which results in a larger phase shift range while keeping the structure significantly thin. The PSS concept is used to design components such as gratings and lens antennas which are presented in this document. The components are designed for an operating frequency of 30 GHz. The PSS phase grating gives high diffraction efficiency, even higher than a dielectric phase grating. Several types of lens antennas are also presented, which show comparable performance to that of a conventional dielectric plano-hyperbolic lens antenna with similar parameters. The PASS concept is used in a beam shaping application in which a flat-topped beam antenna is designed. This work demonstrates the potential for realising thin, lightweight and low-cost antennas at Ka band, in particular for substituting higher-gain antenna technologies such as conventional dielectric shaped lens antennas.

This thesis describes an electrically thin surface used for electromagnetic applications in the microwave regime. The surface is free-standing and its primary purpose is to modify the phase distribution, or the phase and amplitude distribution of electromagnetic fields propagating through it: it is called phase shifting surface (PSS) in the first case, and phase and amplitude shifting surface (PASS) in the second case. For practical applications, the surface typically comprises three or four layers of metallic patterns spaced by dielectric layers. The patterns of the metallic layers are designed to locally alter the phase (and amplitude in the case of the PASS) of an incoming wave to a prescribed set of desired values for the outgoing wave. The PSS/PASS takes advantage of the reactive coupling by closely spacing of the metallic layers, which results in a larger phase shift range while keeping the structure significantly thin. The PSS concept is used to design components such as gratings and lens antennas which are presented in this document. The components are designed for an operating frequency of 30 GHz. The PSS phase grating gives high diffraction efficiency, even higher than a dielectric phase grating. Several types of lens antennas are also presented, which show comparable performance to that of a conventional dielectric plano-hyperbolic lens antenna with similar parameters. The PASS concept is used in a beam shaping application in which a flat-topped beam antenna is designed. This work demonstrates the potential for realising thin, lightweight and low-cost antennas at Ka band, in particular for substituting higher-gain antenna technologies such as conventional dielectric shaped lens antennas.

The target of the research is to employ the autoresonant control technique in order to maintain the nonlinear oscillation mode at resonance (i.e. ultrasonic vibration at the tip of a drill bit at a constant level) during vibro-impact process. Numerical simulations and experiments have been executed. A simplified Matlab-Simulink model which simulates the ultrasonically assisted machining process consists of two parts. The first part represents an ultrasonic transducer that contains a piezoelectric transducer and a 2-step concentrator (waveguide). The second part reflects the applied load to the ultrasonic transducer due to the vibro-impact process. Parameters of the numerical models have been established based on experimental measurements and the model validity has been confirmed through experiments performed on an electromechanical ultrasonic transducer. The model of the ultrasonic transducer together with the model of the applied load was supplemented with a model of the autoresonant control system. The autoresonant control intends to provide the possibility of self-tuning and self-adaptation mechanism for an ultrasonic transducer to maintain its resonant regime of oscillations automatically by means of positive feedback. This is done through a signal to be controlled (please refer to Figure 7.2 and Figure 7.3) transformation and amplification. In order to examine the effectiveness and the efficiency of the autoresonant control system, three control strategies have been employed depending on the attributes of the signals to be controlled . Mechanical feedback control uses a displacement signal at the end of the 2nd step of the ultrasonic transducer. The other two control strategies are current feedback control and power feedback control. Current feedback control employs the electrical current flowing through the piezoceramic rings (piezoelectric transducer) as the signal to be controlled while power feedback control takes into account both the electrical current and the power of the ultrasonic transducer. Comparison of the results of the ultrasonic vibrating system excitation with different control strategies is presented. It should be noted that during numerical simulation the tool effect is not considered due to the complexity of a drill bit creates during the Ultrasonically Assisted Drilling (UAD) process. An effective autoresonant control system was developed and manufactured for machining experiments. Experiments on Ultrasonically Assisted Drilling (UAD) have been performed to validate and compare with the numerical results. Two sizes of drill bits with diameters 3mm and 6mm were applied in combination with three autoresonant control strategies. These were executed during drilling aluminium alloys with one fixed rotational speed associated with several different feed rates. Vibration levels, control efforts, feed force reduction were monitored during experiments. Holes quality and surface finish examinations supplement analysis of the autoresonant control results. In addition, another interesting research on the investigation of the universal matchbox (transformer) has been carried out. Introducing a varying air gap between two ferrite cores allows the optimization of the ultrasonic vibrating system, in terms of the vibration level, effective matchbox inductance, voltage and current level, phase difference between voltage and current, supplied active power etc (more details please refer to Appendix I).

Phase control in microwave circuits is an impotant process. Especially, in certain applications such as phase array antennas, it is the main principle of opeation. In antenna arrays, each array element is fed by an individual oscillator. By controlling the phase of each oscillator, the radiation pattern and the RF power can be combined in space in certain directions. For such applications, phase shifters have been utilized extensively. However, their high costs, difficulties in design and efficiency are impotant disadvantages. More recently, another technique, &quot / Injection Locking&quot / or &quot / Phase Locking&quot / suggests to use a single reference signal injected into each oscilator element. Through this signal, the phase of the individual oscillators can be controlled and set to a desired value. Therefore, power combining in space or known as &quot / Spaial Power Combining&quot / is possible by using &quot / Phase Locking&quot / of individual oscillator elements. In this thesis, this new phase control technique is examined in theory and in application of a 1GHz oscillator system. A reference signal is injected into a voltage controlled oscillator, and the phase progression is obtained by tuning the oscilator&#039 / s free running frequency.

Micro Combined Heat and Power systems or microCHP systems generate heat and electricity for a home. Stirling engines are widely used as prime movers in microCHP applications. Stirling engine is an external combustion engine having an enclosed working fluid (as helium) that is alternately compressed and expanded to operate a piston. The displacer shuttles the working fluid between the hot and cold ends. The piston is coupled to a transmission and to an electrical machine to generate power. Conventional Stirling engines are not controllable to a great degree. The piston and displacer are connected to the same crank and they maintain the same phase difference throughout the cycle. Also the piston and displacer are normally constructed to move in a sinusoidal fashion. The Active Stirling Engine is a new concept introduced in this thesis which has a free displacer. The displacer is driven separately compared to a coupled drive in conventional Stirling engines. The displacer motion can be non-linear with dwell at each ends of the stroke, opening up the possibilities to increase the pressure volume diagram which indicates the work done by the engine. A separately driven displacer also allows introducing phase control and stroke control to improve the controllability of a Stirling engine. This thesis examines the effect of non-linear displacer motion and phase control of the displacer on Stirling engine performance. Simulations are performed in Sage, the leading Stirling engine simulation software, to understand the effect of displacer phase control. A test rig is constructed with the actively controlled displacer connected to a linear machine controlled by a programmable servo. Heat is applied to the test rig though an electric heating coil. The test rig is charged with nitrogen at 20Bar pressure. The power piston is connected to a rotating electrical machine via the transmission. The rotating electrical machine is used to start the engine and to act as the generator. The test rig is instrumented to determine the linear position of the displacer and piston, angular position of the rotating electrical machine shaft, temperatures, pressures and flow. A LabVIEW™ based data acquisition system is set up to capture data from the test rig. Data is collected at various test cases. The simulation result is compared against post processed data. An efficiency improvement of 15% is achieved using this method and is demonstrated experimentally. Applications in micro combined heat and power systems utilising the improved efficiency due to non linear motion and controllability due to phase control are explored in this thesis.

Ultracold atoms provide a powerful tool for studying quantum control of interacting many-body systems with well-characterized and controllable Hamiltonians. In this thesis, we demonstrate quantum control of a many-body system consisting of a ferromagnetic spin-1 Bose-Einstein condensate (BEC). By tuning the Hamiltonian of the system, we can generate either a phase space with an unstable hyperbolic fixed point or a phase space with an elliptical fixed point. A classical pendulum with a stable oscillation about the "down" position and an inverted pendulum with unstable non-equilibrium dynamics about the "up" position are classical analogs of the quantum spin dynamics we investigate in this thesis. In one experiment, we dynamically stabilize the system about an unstable hyperbolic fixed point, which is similar to stabilizing an inverted pendulum. In a second experiment, we parametrically excite the system by modulating the quadratic Zeeman energy. In addition, we demonstrate rectifier phase control as a new method to manipulate the quantum states of the many-body system. This is similar to parametric excitation and manipulation of the oscillation angle of a classical pendulum. These experiments demonstrate the ability to control a quantum system realized in a spinor BEC, and they also can be applied to other quantum systems. In addition, we extend our studies to atoms above the Bose-Einstein transition temperature, and we present results on thermal spin relaxation processes and equilibrium spin populations.

Cette thèse traite du contrôle et de la caractérisation de l'alignement et de l'orientation du point de vue théorique et expérimental. L'alignement d'une molécule linéaire consiste à obtenir une probabilité élevée de localisation de l'axe internucléaire symétrique autour de l'axe de polarisation du champ tandis que l'orientation privilégie un sens particulier le long du champ. L'orientation à l'aide d'impulsions bi couleur (2+1) non résonnantes est étudiée en détail et les conditions permettant d'obtenir une orientation efficace sont examinées. Un schéma bi couleur où la deuxième harmonique est en quasi-résonance avec un niveau vibrationnel de la molécule est également étudié. Cette technique présente l'avantage d'offrir un paramètre supplémentaire à savoir l'écart à la résonance qui peut être ajusté de manière à optimiser l'orientation moléculaire. Finalement une nouvelle technique expérimentale de détection de l'alignement moléculaire est présentée. Celle-ci permet une détection monocoup de l'alignement moléculaire sur une étendue temporelle jusqu'alors inégalée. / This thesis is about the control and characterisation of the alignment and orientation of molecules by ultra short laser pulses on a theoretical and experimental approach. Alignment corresponds to a symmetric angular distribution of the molecular axis peaked along the laser field axis, whereas orientation provides an asymmetric distribution favouring one spatial direction. Orientation by sudden two-colour (2+1) pulses is studied extensively for the non resonant case and conditions required for achieving significant orientation are explored. A second two-colour scheme, where the second harmonic is in quasi resonance with a vibrational level of the molecule, is also presented and discussed. The last technique has the advantage to offer the detuning of the laser frequency as an additional free parameter, which can be adjusted to enhance molecular orientation. A new experimental polarization imaging 2D technique for the detection alignment is also developed. Experimental results on single shot detection of molecular alignment achieved over an unprecedented temporal span are presented.

This thesis deals with design and implementation of a versatile control unit, which is primarily designed for control of solar collectors. It describes the various stages of design. First, the system of solar collectors is introduced. Its input-output parts are analyzed and the requirements are determined for the control unit. The characteristics of temperature sensors are examined, the work deals with continuous variable speed circulators. The following part is dedicated to hardware and software implementation of the objectives of the work. The boards were designed in Eagle design environment, the firmware was written in C programming language. In conclusion, the evaluation of the results of the proposed system and possible ways of its further development are discussed. The versatile control unit can be deployed in practice realistically.