Neste trabalho, medimos o perfil 3D de superfícies (microtopografia) utilizando uma técnica de interferometria óptica: Phase-Shi,ftzng (Deslocamento de Fase). Utilizamos um interferômetro do tipo Twyman-Green para produzir fi.guras de interferência da superfície analisada. Essas imagens foram armazenadas usando-se uma câmera CCD ligada à um microcomputador. Para obter a microtopografia, calculamos o Mapa de Fase a partir das imagens digitalizadas usando um programa de microcomputador. Posteriormente um outro programa removeu a ambiguidade da função tangente (unwrapping), pela Técnica do Autômato Celular, usada no cáiculo do Mapa de Fase. Então efetuamos os cálculos para determinar a microtopografia da superfície. Depois fizemos a análise da microtopografia, levantando informações relevantes para a sua caracterização. Analisamos objetos com alta refletividade (espelhos planos e redes de Ronchi) e obtivemos bons resultados. Também comparamos alguns dos resultados obtidos com a técnica de Deslocamento de Fase com os resultados obtidos pela análise de Franjas de Igual Espessura. / In this work we measured the 3D profile of surfaces (microtopography) using a optical interferometric technique: Phase-Shifting. We used a interferometer of type Twyman-Green to produce interferograms from analyzed surface. These images was captured using a CCD camera that was linked to a microcomputer. To obtain a microtopography, we calculated the Phase Map using the digitalized images and a software of microcomputer. Then another program removed the wrapping of tangent fuction, using the Cellular-Automata Technique, that was used to calculate the Phase Map. So we calculated the microtopography of the surface. After we did the analyses of the microtopography, find out some important informations of its description. We studied objects with high reflectivity (plane mirrors and Ronchi ruting) and we obtained good results. Also we compared some results with that obtained by analyses of Fringes of Equal Thickness\'

CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior / This work presents the analysis, design example, simulations and experimental results on a soft-switching bidirectional isolated three-phase dc-dc converter using dual phase-shift control with variable duty cycle. The topology uses three single H-bridges in the primary side and a three-phase inverter in the secondary side. High-frequency isolation is ensured by using three single-phase transformers connected in open delta-wye configuration. The variation of both phase-shift (PS) angles between the H-bridge legs and/or primary and secondary sides allows controlling the power flow, while reduced reactive power flow is possible. The variable duty cycle is used to ensure a constant voltage bus and/or zero voltage switching (ZVS) operation. A detailed analysis is presented considering a model based on the fundamental components for the voltages and currents in the transformer and, aiming its validation, a second analysis from the operation stages of the converter has also been developed. Besides, the dynamic model of the converter, based on fundamental components and employing the gyrator theory has been developed. A design example with nominal values assumptions, stresses and specifications for components, discrete control system characterization and its FPGA programming are presented. Simulation and experimental results in steady state and closed-loop performance are presented and discussed to validate the proposed approach. / Este trabalho apresenta a anÃlise, exemplo de projeto, simulaÃÃes e resultados experimentais de um conversor CC-CC trifÃsico isolado bidirecional com comutaÃÃo suave, dual phase shift (DPS) e razÃo cÃclica variÃvel. A topologia utiliza trÃs pontes H monofÃsicas no lado primÃrio e um inversor trifÃsico no lado secundÃrio. A isolaÃÃo em alta frequÃncia à garantida utilizando-se trÃs transformadores monofÃsicos conectados em uma configuraÃÃo delta aberto/estrela. A variaÃÃo de ambos os Ãngulos de deslocamento de fase, entre os braÃos de uma ponte H e/ou entre os lados primÃrio e secundÃrio, permitem o controle do fluxo de potÃncia. Esta flexibilidade garante a obtenÃÃo de um baixo conteÃdo reativo na anÃlise de projeto da topologia. A razÃo cÃclica variÃvel à utilizada para assegurar um barramento constante e uma operaÃÃo dos interruptores com comutaÃÃo suave. Uma anÃlise matemÃtica da estrutura à apresentada considerando um modelo baseado em componentes fundamentais e, com o propÃsito de comprovar a validade deste modelo, uma segunda anÃlise a partir das etapas de operaÃÃo do conversor tambÃm foi desenvolvida. O modelo dinÃmico do conversor, baseado nas componentes fundamentais, tambÃm foi concebido com auxÃlio da teoria do gyrator. Um exemplo de projeto, com a obtenÃÃo de valores nominais, esforÃos e especificaÃÃes dos componentes, caracterizaÃÃo do sistema de controle discreto e sua programaÃÃo atravÃs de FPGA sÃo desenvolvidos. SimulaÃÃes e resultados experimentais do conversor operando em regime permanente e dinÃmico sÃo apresentados para validar o modelo proposto.

The connection between phase shifts and the ANC has been explored in the frame of the effective range theory. The main result is that, in practice and under rather simple requirements, scattering states (phases shifts) can be correctly described and connected with bound states via the effective range function, and therefore, ANCs can be accurately determined thanks to the analytic properties of this function. This result has an important impact in stellar evolution due to the ANC and phases shifts are directly connected with capture cross sections which, for instance, determine partially the stage and evolution of stars.<p><p>As a first step, the effective range function is approximated via the effective range expansion which shows that a successful phase-shift description depends on how precise the effective range parameters are determined. Thus, a technique to compute accurately these parameters is developed here. Its construction is based on a set of recurrence relations at low energy, that allows a compact and general description of the truncated<p>effective range expansion. Several potential models are used to illustrate the effectiveness<p>of this technique and to discuss its numerical limitations. The results shows that a very good precision of the effective-range parameters can be achieved; nevertheless, to describe experimental phase shifts several effective-range parameters can be needed, which shows a limitation for practical applications.<p><p>As a second step, the effective range function is analyzed theoretically in an arbitrary energy range. This analysis shows that this function can be decomposed in such a way that contributions of bound states, resonances and background can be separated in a similar way as in the phenomenological R-matrix. In this new form experimental data can be better fitted because the free parameter space is reduced considerably,<p>and therefore, extrapolations are better handled. By construction, the method agrees with the scattering matrix properties which allows a simple calculation of resonances (locations and widths) and asymptotic normalization constants (ANCs). Several tests are successfully performed via potential models. Phase shifts for the 2 + partial wave of the 12C+α are analyzed with this method. They are correctly described including both<p>resonances at Ec.m. = 2.7 and 4.4 MeV. For the 6.92 MeV (2+) exited state of 16O, the ANC estimation 112(8) × 10 3 fm^−1/2 is obtained taking into account statistical errors. / Doctorat en Sciences / info:eu-repo/semantics/nonPublished

Residual dipolar couplings can be used to increase the number of qubits for quantum information processing. We have used molecules containing 3, 5 and 8 spins oriented in a liquid crystal matrix, and exploited the residual dipolar coupling to demonstrate quantum information processing in them. Transition assignment is performed using HET-Z-COSY experiment and qubit addressability is achieved by transition selective pulses. It is expected that using this protocol higher qubits can be achieved. For the implementations reported in this work, evolution under the internal Hamiltonian was not explored. It is however interesting to investigate how effectively the evolution under internal Hamiltonian can be manipulated to implement quantum algorithms in these systems. Recently an approach has been reported in this direction, where a new method of preparing pseudopure states in oriented systems by exciting selected multiple quantum using evolution under effective dipolar Hamiltonian, has been demonstrated [24].

No description available.

Since their discovery in 1978 by Hill et al. and the development of the transverse holographic technique for their fabrication by Meltz et al. in 1989, fiber Bragg gratings (FBG) have become an important device for applications in optical communications, optical signal processing and fiber-optical sensors. A superstructured fiber Bragg grating (SFBG), also called a sampled fiber Bragg grating, is a special FBG that consists of a several small FBGs placed in close proximity to one another. SFBGs have attracted much attention in recent years with the discovery of techniques allowing the creation of equivalent chirp or equivalent phase shifts. The biggest advantage of an SFBG with equivalent chirp or equivalent phase shifts is the possibility to design and fabricate gratings with greatly varying phase and amplitude responses by adjusting the spatial profile of the superstructure. The realization of SFBGs with equivalent chirp or equivalent phase shifts requires only sub-millimeter precision. This is a relief from the sub-micron precision required by traditional approaches. In this thesis, the mathematical modeling of FBGs and SFBGs is reviewed. The use of SFBGs for various applications in photonic microwave signal processing is considered. Four main topics are presented in this thesis. The first topic is the use of SFBG as a photonic true-time delay (TTD) beamformer for phased array antennas (PAAs). The second topic addresses non-linearities in the group delay response of an SFBG with equivalent chirp in its sampling period. An SFBG with an equivalent chirp using only a linear chirp coefficient may yield a group delay response that deviates from the linear response required by a TTD beamformer. In the thesis, a technique to improve the linearity of the group delay response is proposed and an adaptive algorithm to find the optimal linear and non-linear chirp coefficients to produce the best linear group delay response is described. Since no closed-form solution exists to represent the amplitude and phase responses of an SFBG, we rely on a Fourier transform analogy under a weak grating approximation as a starting point in the design of an SFBG. Simulations are then used to refine the response of the SFBG. The algorithm proposed provides an optimal set of chirp coefficients that minimizes the error in the group delay response. Four gratings are fabricated using the optimized chirp coefficients and their application in a TTD PAA system is discussed. The third topic discusses the use of an SFBG with equivalent phase shifts in its sampling period as a means to realize optical single sideband (SSB) modulation. SSB modulation eliminates the power penalty caused by chromatic dispersion experienced by an optical signal traveling through a long length of optical fiber. By introducing two π phase shifts through equivalent sampling to the SFBG, two ultra-narrow transmission bands are created in the grating stop band of the +/- 1st spectral orders. In the proposed system, a double-sideband plus carrier (DSB+C) modulated optical signal is sent to the input of an optical SSB filter based on the equivalent phase-shift SFBG in order to select the optical carrier and a single sideband, effectively blocking one sideband from propagating. Finally, the fourth topic focuses on the implementation of a photonic microwave bandpass filter based on an SFBG with equivalent chirp. Photonic microwave filters are used to process microwave signals in the optical domain. By using a technique called phase-modulation to intensity-modulation (PM-IM) conversion, a two-tap delay line filter is created with one negative tap. A single SFBG with a chirp in its sampling period is used as a means to achieve the PM-IM conversion for the two taps. Two phase modulated optical carriers are used to generate the two taps, each entering a different port of the SFBG and thus experiencing an opposite dispersion value. The two optical signals are then recombined before being sent to a photodetector (PD) where the filtered microwave signal is recovered.

Overall topic of presented thesis is development of methods of measurement of low impedances below 10 Ohm in a frequency range up to 1 MHz. The thesis comprises of three main parts. First part of thesis describes design of unique and simple calculable standards of resistance that are used for calibration of the bridge and as the reference standards for the calibrations. Next part of theses is focused on design of digital sampling bridge in various topologies suitable for measurement of various types of impedance standards up to frequency of 1 MHz. The thesis describes the HW components, data processing and corrections scheme allowing the designed bridge to reach expanded uncertainties (k=2) below 0.005% and 250 µrad at 1 MHz. One of the key points of the proposed corrections scheme is unique automatic linearity calibration method requiring minimal operator's effort. The theses also describes integration of Spice model of the bridge the bridge SW that allowed validation of functionality of the bridge and also analysis of uncertainty contributions related to interferences between the bridge components. The last part of the thesis shows selection of measurements of known impedances and international comparisons that proofs performance of the bridge.

The purpose of this semestral project is to explain the basic issues of simple digital modulations through the creation of simple digital modulations using direct digital synthesis. It begins with a short review of digital modulation theory and the theory about direct digital synthesis. All the technical documentation is attached, including schematics and boards of functional modulator.

This work is aimed at an analysis of frequency demodulation, design, simulation, and construction of a coincidence demodulator. Chapter 1 explains the basic characteristics of frequency modulated (FM) signals and provides an overview of the required signal bandwidth, the signal spectrum, and the signal-to-noise ratio after demodulation. Chapter 2 describes each type of FM demodulator separately, and it includes all significant types of demodulator for FM radio broadcast. The function of the coincidence demodulator and its characteristics are explained in detail. Chapter 3 contains a theoretical solution of the phase shift network. Calculated values of the circuit elements are verified by simulation with a view to the total harmonic distortion of the demodulator output signal. Chapter 4 describes the front-end circuit of the receiver. Here, the filter design and the mixer circuit description are provided. The final part of the thesis presents the applicable laboratory task.

Orientador: Cláudio Kitano / Resumo: Nesta dissertação de mestrado é apresentado um vibrômetro para a medição de deslocamentos nanométricos. O vibrômetro proposto está baseado em um interferômetro de Michelson modificado, homódino e em malha fechada. A demodulação em tempo real é executada inteiramente em modo digital, utilizando uma plataforma embarcada que realiza a aquisição de dados, processamento dos sinais, controle PI (proporcional-integral) e a geração dos sinais que acionam o modulador de fase óptica (baseado em uma célula Pockels) e o atuador piezoelétrico sob estudo. Dois sinais em quadratura de fase são obtidos a partir de um único sinal interferométrico utilizando uma tensão de modulação principal e, em seguida, a conhecida técnica de multiplicação cruzada é aplicada para calcular a variação da fase óptica de interesse. A condição de quadratura é atingida pelo próprio controlador PI por meio da análise da figura de Lissajous dos sinais fora de fase. O novo vibrômetro óptico é capaz de medir deslocamentos nanométricos, e é simples, barato, exato, imune ao desvanecimento e auto-consistente. O controlador PI é robusto, uma vez que o método de demodulação é capaz de trabalhar com elevado ruído eletrônico, variações indesejáveis no ganho do amplificador e na tensão de meia-onda da célula Pockels com a temperatura e outras perturbações externas. O novo sistema foi utilizado para determinar a magnitude da resposta em frequência de dois protótipos de atuadores piezoelétricos flextensionais multiatuados. As ... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: A vibrometer to measure nanometric displacements is presented in this work. The proposed vibrometer is based on a modified closed loop homodyne Michelson interferometer. Real-time phase demodulation is carried out entirely in a digital mode, using an embedded platform that performs data acquisition, signal processing, PI (proportional-integral) control and the generation of signals that drive the electrooptic Pockels cell phase shifter and the piezoelectric actuator under test. Two phase quadrature signals are generated from a single interferometric output, using the interleaving action, in alternation, of a digitally generated principal modulating signal, and then the well-known cross-multiplication technique is applied to perform the computation of the phase shift of interest. The quadrature condition is reached by the PI control itself, using the length difference between the major axis and the minor axis of the ellipse formed by the Lissajous figure associated with the out of phase signals as the controller error signal. The new optical vibrometer is capable of measuring nanometric displacements, and is simple, inexpensive, accurate, immune to fading and self-consistent. The PI controller is robust, since the demodulation method is able to work under high electronic noise, undesirable variations in Pockels cell half-wave voltage with temperature, amplifier gain and other external entrances. The new method was used to determine the displacement frequency response curves of... (Complete abstract click electronic access below) / Mestre