La fusion thermonucléaire peut être obtenue sur les installations laser de classe mégajoule (NIF, LMJ) par l'implosion d'un mélange de Deutérium-Tritium confiné dans un microballon. Afin d'apporter les corrections adéquates sur les conditions expérimentales en vue de la réussite de ces expériences de fusion, il est nécessaire, entre autre, de qualifier la symétrie d'implosion. C'est le rôle dévolu à des chaînes de mesure spécifiques appelées diagnostics d'imagerie X. Aucun imageur X conçu à ce jour ne permet de réaliser cette mesure sans être perturbé par l'ambiance radiative engendrée par les produits des réactions nucléaires. L'imageur X développé dans cette thèse devra donc réaliser une image à haute résolution et à haute énergie tout en considérant les contraintes liées à cette ambiance nucléaire. La démarche a consisté tout d'abord à concevoir un système d'imagerie X permettant de réaliser l'image du microballon avec une résolution de 5 µm dans la bande 10-95 keV et à garantir sa survie face à l'agression nucléaire. Cette image X a été convertie en lumière visible par un scintillateur afin de permettre son transport vers une zone radio protégée où le système d'enregistrement est localisé. Cet analyseur optique constitué d'un amplificateur de luminance et d'un détecteur pixélisé a également été étudié et une nouvelle méthode permettant de réduire les perturbations transitoires induites par les rayonnements ionisants a été mise au point. La fonction de transport d'image est assurée au moyen d'un relai optique, conçu spécialement pour supporter les perturbations induites par les rayonnements ionisants. Ce dimensionnement par parties associé à des simulations Monte-Carlo (GEANT4) et des campagnes expérimentales (sur l'installation OMEGA du LLE) ont permis d'aboutir à une architecture cohérente de diagnostic permettant de supporter des niveaux de perturbations encore jamais atteints.

La focalisation d'un laser intense sur une surface solide entraine l'ionisation presque complète du milieu, donnant lieu à la formation d'un plasma de densité plusieurs centaines de fois supérieure à la densité critique. La dynamique collective des électrons du plasma est alors dictée par l'action du champ laser, et peut donner lieu à l'émission d'un train d'impulsions XUV de durée attoseconde. Les motivations de ce travail de thèse sont les suivantes : démontrer que l'on peut, en contrôlant tir à tir la forme exacte du champ électrique du laser, guider de façon reproductible la dynamique des électrons du plasma avec une précision attoseconde, et par conséquent la structure temporelle du train d'impulsions attosecondes généré. Pour réaliser cette expérience, nous avons tout d'abord mis en place un dispositif expérimental d'interaction laser-solide au kHz, dimensionné pour assurer des conditions d'interaction parfaitement reproductible tir à tir. Une fois ce dispositif éprouvé et les premières harmoniques détectées, nous avons ensuite démontré, en observant le spectre de l'émission XUV, le contrôle attoseconde de la dynamique des électrons du plasma en utilisant la source laser de deux cycles optiques stabilisée en phase. Enfin, nous avons observé expérimentalement, par la technique du phare attoseconde, le contrôle spatio-temporel par le champ laser du train d'impulsions attosecondes, donnant notamment lieu à la génération d'un groupe d'impulsions attosecondes isolées spatialement.

Nous présentons dans ce mémoire les résultats concernant la caractérisation spectroscopique spatiotemporelle de plasmas d'ablation laser obtenus à partir de cibles de céramiques d'oxydes complexes (CCTO et BSTO). Nos mesures montrent que les différentes espèces constituant le plasma évoluent de façons similaires quelque soit leur degré d'ionisation et ceci pour l'ensemble des conditions de pression et de fluence explorées. Nous montrons aussi que dans les premiers instants suivant l'impact laser, le plasma est fortement non-uniforme et se propage selon une seule dimension, il s'uniformise par la suite et s'expanse alors dans les trois dimensions. Une collaboration avec le laboratoire LP3 (Université de Marseille) nous a permis d'estimer les paramètres caractéristiques du plasma (température, densité électronique, épaisseur) à partir de la confrontation entre nos spectres expérimentaux et les résultats de la simulation de la radiance spectrale du plasma. A partir de cette confrontation, nous confirmons qu'il existe une forte corrélation entre l'inhomogénéité du plasma et son type d'expansion. Grâce à l'analyse spectrale il a été possible d'identifier et de quantifier des polluants présents dans les cibles, nous avons pu ainsi estimer des concentrations minimales pouvant atteindre la dizaine de ppm selon le type de polluant.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.