Thesis (M.S.)--Brigham Young University. Dept. of Mechanical Engineering, 2007. / Includes bibliographical references (p. 127-130).

abstract: There are many computer aided engineering tools and software used by aerospace engineers to design and predict specific parameters of an airplane. These tools help a design engineer predict and calculate such parameters such as lift, drag, pitching moment, takeoff range, maximum takeoff weight, maximum flight range and much more. However, there are very limited ways to predict and calculate the minimum control speeds of an airplane in engine inoperative flight. There are simple solutions, as well as complicated solutions, yet there is neither standard technique nor consistency throughout the aerospace industry. To further complicate this subject, airplane designers have the option of using an Automatic Thrust Control System (ATCS), which directly alters the minimum control speeds of an airplane. This work addresses this issue with a tool used to predict and calculate the Minimum Control Speed on the Ground (VMCG) as well as the Minimum Control Airspeed (VMCA) of any existing or design-stage airplane. With simple line art of an airplane, a program called VORLAX is used to generate an aerodynamic database used to calculate the stability derivatives of an airplane. Using another program called Numerical Propulsion System Simulation (NPSS), a propulsion database is generated to use with the aerodynamic database to calculate both VMCG and VMCA. This tool was tested using two airplanes, the Airbus A320 and the Lockheed Martin C130J-30 Super Hercules. The A320 does not use an Automatic Thrust Control System (ATCS), whereas the C130J-30 does use an ATCS. The tool was able to properly calculate and match known values of VMCG and VMCA for both of the airplanes. The fact that this tool was able to calculate the known values of VMCG and VMCA for both airplanes means that this tool would be able to predict the VMCG and VMCA of an airplane in the preliminary stages of design. This would allow design engineers the ability to use an Automatic Thrust Control System (ATCS) as part of the design of an airplane and still have the ability to predict the VMCG and VMCA of the airplane. / Dissertation/Thesis / Masters Thesis Aerospace Engineering 2016

Made available in DSpace on 2014-10-09T12:55:29Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:04:54Z (GMT). No. of bitstreams: 0 / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

O bisfenol-A (BPA), um monômero usado na fabricação de resinas epóxi e de plásticos de policarbonato, é considerado um potente desregulador endócrino que provoca diversas doenças. O objetivo deste trabalho foi estudar a remoção de BPA, de soluções aquosas através da técnica de adsorção em batelada e em processo contínuo. Também foi investigada a capacidade de regeneração do sorvente utilizado nos testes em batelada. Para isso, foram testados diferentes adsorventes (zeólita em pó e granular modificada com quitosana, zeólita sódica e carvão ativado granular), a fim de determinar qual apresentaria maiores índices de remoção de BPA. Posteriormente foram realizados ensaios de sorção com o sólido escolhido objetivando encontrar as condições mais adequadas de processo considerando os parâmetros de pH, tempo de residência, concentração de sólido sorvente. Ainda, isotermas de equilíbrio para este sistema foram construídas. A adsorção em leito fixo foi avaliada em experimentos via planta piloto de adsorção, segundo a influência de três variáveis: efeito da massa de adsorvente utilizada (5g e 10g), vazão de alimentação (15 mL.min-1 e 20 mL.min-1) e concentração inicial (50 mg.L-1 e 100 mg.L-1). Na regeneração do carvão ativado saturado com BPA, empregaram-se como solventes acetona, n-pentano e diclorometano e também foi utilizada a técnica de ultrassom. As condições de sorção utilizadas foram: pH 6, tempo 60 min, concentração de sorvente 10 g.L-1 e soluções de BPA 10 mg.L-1. A microestrutura externa e a composição elementar semi-quantitativa do carvão ativado antes e após o processo de sorção e regeneração foram analisadas pela técnica de MEV-EDS. No que se refere à sorção, melhores resultados foram encontrados com o carvão ativado granular, atingindo eficiência de remoção de 56,7% em pH 7. O modelo de isoterma de sorção que melhor se ajustou aos dados experimentais foi o modelo de Sips, que forneceu a constante de energia ou afinidade do processo e também a acumulação máxima de BPA no sorvente. Os testes de regeneração mostraram que os melhores agentes regenerativos foram a acetona (100%), com eficiência de remoção de 105,6% e a técnica de ultrassom, a qual apresentou uma eficiência de remoção de 106,4% após um tempo de contato de 30 min. Por ser uma técnica que não gera resíduo, optou-se utilizar o ultrassom para os testes de regeneração em ciclos. O ensaio de tempo de regeneração em banho de ultrassom mostrou que para os tempos de 30, 40, 50 e 60 min de contato a regeneração era muito semelhante. Assim, para os testes de ciclos de sorção-regeneração o tempo de contato utilizado foi de 30 min. Os ensaios de regeneração em ciclos mostraram que após seis (6) ciclos a eficiência de regeneração do sólido sorvente foi de 67,8% e a remoção de BPA obtida ao final desses ciclos foi de 60,9%. Quanto à caracterização do sorvente, as micrografias mostraram que o carvão ativado, antes e após os ciclos de sorção/regeneração (S/R), possui superfícies bastante irregulares, heterogêneas e desordenadas, com elevada porosidade. Ensaios realizados em planta piloto de adsorção mostraram a viabilidade técnica de aplicação do carvão ativado para remoção de bisfenol em processos contínuos, tendo sido possível obter as condições operacionais e a curva de ruptura do sistema. Os resultados indicaram que a adsorção em leito fixo apresentou melhores resultados nas seguintes condições: vazão de alimentação de 20 mL.min-1, concentração inicial de 100 mg.L-1 e 10g de sólido sorvente. / The bisphenol-A (BPA), a monomer used in the manufacture of epoxy resins and polycarbonate plastics is considered a powerful endocrine disrupter which causes various diseases. The objective of this work was to study the removal of BPA from aqueous solutions by adsorption technique in batch and continuous process. The regeneration capacity of sorbents used in batch tests was also investigated. For this purpose, different adsorbents were initially tested (zeolite powder and granular modified with chitosan, sodium zeolite and granular activated carbon) in order to determine which one presents higher removal rates of BPA. After that, sorption tests were carried out with the chosen solid aiming to find the best process conditions considering pH, residence time and sorbent concentration. Hence, equilibrium isotherms were constructed for this system. The fixed bed adsorption was evaluated through adsorption experiments using a pilot plant, according to the influence of three variables: the effect of the mass of the used adsorbent (10g and 5g), flow rate (15 mL.min-1 and 20 mL.min-1) and initial concentration (50 mg.L-1 and 100 mg.L-1). In activated carbon regeneration it was employed acetone, n-pentane and dichloromethane as solvents and the ultrasound technique was also used. The applied sorption conditions were the following: pH 6, time 60 min, sorbent concentration of 10 g.L-1 and BPA solution of 10 mg.L-1. The external microstructure and semi-quantitative elemental composition of the activated carbon before and after the sorption and regeneration were analyzed by SEM-EDS technique. Concerning sorption, the best results were found with granular activated carbon, reaching removal efficiency of 56.7% at pH 7. The sorption isotherm model that best fit the experimental data was the Sips model, which provided constant energy or affinity of the process and also the maximum accumulation of BPA in the sorbent. The regeneration tests showed that the best agents of regeneration were acetone (100%), with removal efficiency of 105.6% and the ultrasound technique, which presented a removal efficiency of 106.4% after a contact time of 30 min. Considering that the technique doesn’t generates waste, it was decided to use the ultrasound tests for regeneration cycles. The regeneration test time in ultrasound bath showed that for contact times of 30, 40, 50 and 60 min the regeneration was very similar. Thus, for testing cycles of sorption-regeneration, the used contact time was 30 minutes. The regeneration cycle tests showed that after six (6) cycles of regeneration efficiency of the solid sorbent was 67.8% and the removal of BPA obtained at the end of these cycles was 60.9%. Regarding characterization of the sorbent, the micrographs showed that the activated carbon before and after cycles of sorption/regeneration (S/R), has very irregular, heterogeneous and disordered surfaces with high porosity. Tests carried out in a pilot plant adsorption showed the technical viability of application of the activated carbon for removal of bisphenol in continuous processes, thus it is possible to obtain operating conditions and the breakthrough curve for this system. These results indicate that the fixed bed adsorption presents best results in the following conditions: feed flow rate of 20 mL.min-1, initial concentration of 100 mg.L-1 and 10 g of solid sorbent.

abstract: Trenchless technology is a group of techniques whose utilization allows for the installation, rehabilitation, and repair of underground infrastructure with minimal excavation from the ground surface. As the built environment becomes more congested, projects are trending towards using trenchless technologies for their ability to quickly produce a quality product with minimal environmental and social costs. Pilot tube microtunneling (PTMT) is a trenchless technology where new pipelines may be installed at accurate and precise line and grade over manhole to manhole distances. The PTMT process can vary to a certain degree, but typically involves the following three phases: jacking of the pilot tube string to achieve line and grade, jacking of casing along the pilot bore and rotation of augers to excavate the borehole to a diameter slightly larger than the product pipe, and jacking of product pipe directly behind the last casing. Knowledge of the expected productivity rates and jacking forces during a PTMT installation are valuable tools that can be used for properly weighing its usefulness versus competing technologies and minimizing risks associated with PTMT. This thesis outlines the instrumentation and monitoring process used to record jacking frame hydraulic pressures from seven PTMT installations. Cyclic patterns in the data can be detected, indicating the installation of a single pipe segment, and enabling productivity rates for each PTMT phase to be determined. Furthermore, specific operations within a cycle, such as pushing a pipe or retracting the machine, can be observed, allowing for identification of the critical tasks associated with each phase. By identifying the critical tasks and developing more efficient means for their completion, PTMT productivity can be increased and costs can be reduced. Additionally, variations in depth of cover, drive length, pipe diameter, and localized ground conditions allowed for trends in jacking forces to be identified. To date, jacking force predictive models for PTMT are non-existent. Thus, jacking force data was compared to existing predictive models developed for the closely related pipe jacking and microtunneling methodologies, and the applicability of their adoption for PTMT jacking force prediction was explored. / Dissertation/Thesis / M.S. Civil Engineering 2013

O bisfenol-A (BPA), um monômero usado na fabricação de resinas epóxi e de plásticos de policarbonato, é considerado um potente desregulador endócrino que provoca diversas doenças. O objetivo deste trabalho foi estudar a remoção de BPA, de soluções aquosas através da técnica de adsorção em batelada e em processo contínuo. Também foi investigada a capacidade de regeneração do sorvente utilizado nos testes em batelada. Para isso, foram testados diferentes adsorventes (zeólita em pó e granular modificada com quitosana, zeólita sódica e carvão ativado granular), a fim de determinar qual apresentaria maiores índices de remoção de BPA. Posteriormente foram realizados ensaios de sorção com o sólido escolhido objetivando encontrar as condições mais adequadas de processo considerando os parâmetros de pH, tempo de residência, concentração de sólido sorvente. Ainda, isotermas de equilíbrio para este sistema foram construídas. A adsorção em leito fixo foi avaliada em experimentos via planta piloto de adsorção, segundo a influência de três variáveis: efeito da massa de adsorvente utilizada (5g e 10g), vazão de alimentação (15 mL.min-1 e 20 mL.min-1) e concentração inicial (50 mg.L-1 e 100 mg.L-1). Na regeneração do carvão ativado saturado com BPA, empregaram-se como solventes acetona, n-pentano e diclorometano e também foi utilizada a técnica de ultrassom. As condições de sorção utilizadas foram: pH 6, tempo 60 min, concentração de sorvente 10 g.L-1 e soluções de BPA 10 mg.L-1. A microestrutura externa e a composição elementar semi-quantitativa do carvão ativado antes e após o processo de sorção e regeneração foram analisadas pela técnica de MEV-EDS. No que se refere à sorção, melhores resultados foram encontrados com o carvão ativado granular, atingindo eficiência de remoção de 56,7% em pH 7. O modelo de isoterma de sorção que melhor se ajustou aos dados experimentais foi o modelo de Sips, que forneceu a constante de energia ou afinidade do processo e também a acumulação máxima de BPA no sorvente. Os testes de regeneração mostraram que os melhores agentes regenerativos foram a acetona (100%), com eficiência de remoção de 105,6% e a técnica de ultrassom, a qual apresentou uma eficiência de remoção de 106,4% após um tempo de contato de 30 min. Por ser uma técnica que não gera resíduo, optou-se utilizar o ultrassom para os testes de regeneração em ciclos. O ensaio de tempo de regeneração em banho de ultrassom mostrou que para os tempos de 30, 40, 50 e 60 min de contato a regeneração era muito semelhante. Assim, para os testes de ciclos de sorção-regeneração o tempo de contato utilizado foi de 30 min. Os ensaios de regeneração em ciclos mostraram que após seis (6) ciclos a eficiência de regeneração do sólido sorvente foi de 67,8% e a remoção de BPA obtida ao final desses ciclos foi de 60,9%. Quanto à caracterização do sorvente, as micrografias mostraram que o carvão ativado, antes e após os ciclos de sorção/regeneração (S/R), possui superfícies bastante irregulares, heterogêneas e desordenadas, com elevada porosidade. Ensaios realizados em planta piloto de adsorção mostraram a viabilidade técnica de aplicação do carvão ativado para remoção de bisfenol em processos contínuos, tendo sido possível obter as condições operacionais e a curva de ruptura do sistema. Os resultados indicaram que a adsorção em leito fixo apresentou melhores resultados nas seguintes condições: vazão de alimentação de 20 mL.min-1, concentração inicial de 100 mg.L-1 e 10g de sólido sorvente. / The bisphenol-A (BPA), a monomer used in the manufacture of epoxy resins and polycarbonate plastics is considered a powerful endocrine disrupter which causes various diseases. The objective of this work was to study the removal of BPA from aqueous solutions by adsorption technique in batch and continuous process. The regeneration capacity of sorbents used in batch tests was also investigated. For this purpose, different adsorbents were initially tested (zeolite powder and granular modified with chitosan, sodium zeolite and granular activated carbon) in order to determine which one presents higher removal rates of BPA. After that, sorption tests were carried out with the chosen solid aiming to find the best process conditions considering pH, residence time and sorbent concentration. Hence, equilibrium isotherms were constructed for this system. The fixed bed adsorption was evaluated through adsorption experiments using a pilot plant, according to the influence of three variables: the effect of the mass of the used adsorbent (10g and 5g), flow rate (15 mL.min-1 and 20 mL.min-1) and initial concentration (50 mg.L-1 and 100 mg.L-1). In activated carbon regeneration it was employed acetone, n-pentane and dichloromethane as solvents and the ultrasound technique was also used. The applied sorption conditions were the following: pH 6, time 60 min, sorbent concentration of 10 g.L-1 and BPA solution of 10 mg.L-1. The external microstructure and semi-quantitative elemental composition of the activated carbon before and after the sorption and regeneration were analyzed by SEM-EDS technique. Concerning sorption, the best results were found with granular activated carbon, reaching removal efficiency of 56.7% at pH 7. The sorption isotherm model that best fit the experimental data was the Sips model, which provided constant energy or affinity of the process and also the maximum accumulation of BPA in the sorbent. The regeneration tests showed that the best agents of regeneration were acetone (100%), with removal efficiency of 105.6% and the ultrasound technique, which presented a removal efficiency of 106.4% after a contact time of 30 min. Considering that the technique doesn’t generates waste, it was decided to use the ultrasound tests for regeneration cycles. The regeneration test time in ultrasound bath showed that for contact times of 30, 40, 50 and 60 min the regeneration was very similar. Thus, for testing cycles of sorption-regeneration, the used contact time was 30 minutes. The regeneration cycle tests showed that after six (6) cycles of regeneration efficiency of the solid sorbent was 67.8% and the removal of BPA obtained at the end of these cycles was 60.9%. Regarding characterization of the sorbent, the micrographs showed that the activated carbon before and after cycles of sorption/regeneration (S/R), has very irregular, heterogeneous and disordered surfaces with high porosity. Tests carried out in a pilot plant adsorption showed the technical viability of application of the activated carbon for removal of bisphenol in continuous processes, thus it is possible to obtain operating conditions and the breakthrough curve for this system. These results indicate that the fixed bed adsorption presents best results in the following conditions: feed flow rate of 20 mL.min-1, initial concentration of 100 mg.L-1 and 10 g of solid sorbent.

Made available in DSpace on 2014-10-09T12:55:29Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:04:54Z (GMT). No. of bitstreams: 0 / O Instituto de Pesquisas Energéticas e Nucleares (IPEN) é uma Instituição de Pesquisas e Desenvolvimento que está localizada dentro de uma área densamente povoada, na cidade de São Paulo. O ciclo do combustível nuclear foi desenvolvido desde o yellow cake até o enriquecimento dentro do IPEN. Após esta etapa, toda técnica foi repassada à iniciativa privada e à Marinha do Brasil (CTM/SP). Algumas usinas do ciclo do combustível estavam em nível semi-industrial, com produção de mais de 20 kg.h-1. Como Instituto de Pesquisa, o IPEN cumpriu sua função no ciclo de combustível, que é desenvolver e repassar a tecnologia. Com a necessidade de se encontrar um lugar para implantar novos projetos, o espaço físico escolhido foi no local onde se achava a Usina de Produção de Hexafloreto de Urânio (UF6), que estava inativa há alguns anos e apresentava riscos de vazamento em potencial, o que poderia ocasionar agressão ao meio ambiente e riscos de acidentes graves. O descomissionamento desta usina exigiu um cuidadoso planejamento por ser um trabalho nunca realizado no Brasil, numa unidade desse tipo com riscos eminentes, visto que envolvia o gás fluoridetro (HF) e ácido fluorídrico, solução altamente corrosiva. Fizeram-se avaliações criteriosas e desenvolveram-se equipamentos especiais, com o intuito de evitar vazamentos e riscos de acidente. No trabalho de descomissionamento, foram obedecidas as normas da CNEN em todas as operações realizadas. Foi calculado o impacto ambiental, que se mostrou desprezível sendo que as doses de radiação, após o térmíno do trabalho, estavam dentro dos limites de público, podendo a área ser liberada para nova utilização. O tipo de descomissionamento realizado foi de remoção completa, retirando-se todos os materiais e equipamentos. Todos os rejeitos foram tratados e/ou armazenados em instalações adequadas. / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Background: A pilot study can be an important step in the assessment of an intervention by providing information to design the future definitive trial. Pilot studies can be used to estimate the recruitment and retention rates and population variance and to provide preliminary evidence of efficacy potential. However, estimation is poor because pilot studies are small, so sensitivity analyses for the main trial's sample size calculations should be undertaken. Methods: We demonstrate how to carry out easy-to-perform sensitivity analysis for designing trials based on pilot data using an example. Furthermore, we introduce rules of thumb for the size of the pilot study so that the overall sample size, for both pilot and main trials, is minimized. Results: The example illustrates how sample size estimates for the main trial can alter dramatically by plausibly varying assumptions. Required sample size for 90% power varied from 392 to 692 depending on assumptions. Some scenarios were not feasible based on the pilot study recruitment and retention rates. Conclusion: Pilot studies can be used to help design the main trial, but caution should be exercised. We recommend the use of sensitivity analyses to assess the robustness of the design assumptions for a main trial.

Background: Informal caregivers provide unpaid support to a family member, which has been shown to more positively affect their relatives’ health outcomes than equivalent paid caregivers. The provision of this support, however, comes at a cost to the carers’ health and wellbeing through meeting the demands of the caring role. Efforts have been made to alleviate these consequences through various forms of interventions aimed to enable the carers to meet these demands. The reported success of these interventions is varied in regards to their effectiveness; an argument supported by literature review papers on the subject that questions the methodologies and evaluations of these interventions. Rationale: There is a need to explore the ways to enhance the health and wellbeing of informal carers by means of a robust design and evaluation. This thesis reports a study, the aim of which is to provide information about how to reduce the negative effects of the carer role whilst enhancing the positive effects using an intervention developed using lived experience. Method: The self-care intervention was developed and piloted with those caring for a relative with bipolar disorder. This was achieved in three stages: (i) qualitative interviews with carers to explore and understand the role, (ii) developing the intervention informed by qualitative findings, and finally by (iii) piloting the intervention. Effectiveness of the intervention was determined using health and wellbeing outcomes, the results of which were compared to a control group who did not take part in the intervention. Results: A positive potential for psychoeducational, cognitive behavioural and mindfulness techniques in enhancing the health and wellbeing of those caring for a relative diagnosed with bipolar disorder was found. From the exploration of lived experience, “Being Bound” was elicited from the data representing the conflict between the detrimental effects of providing care and being unable to take respite or reprieve through guilt and anxiety. Conclusion: Professionals who work with family members, individually or as part of a family unit, should consider the benefits of targeted information for carers. Provision of information is not enough to engage the carer in the process of understanding their relative’s behaviours, but requires a process of interaction and personalisation. In contributing to existing research, the use of hermeneutic phenomenology provided new insight in to the experiences of those providing care. The outcome of the intervention pilot shows positive potential for the use of interventions beyond psychoeducation alone and the use of a self-care approach.

Overweight and obese women who lose weight prior to pregnancy have fewer pregnancy complications than those who do not (Forsum, Brantsaeter, Olafsdottir, Olsen, & Thorsdottir, 2013; Schummers, Hutcheon, Bodnar, Lieverman, & Himes, 2015). Research findings suggest there are missed opportunities to provide diet and physical activity counseling during preventive care visits. Providers cite a lack of time and resources as barriers (Morgan et al., 2006; Yamamoto et al., 2014). This was a two-group, randomized, pilot-study of 19 overweight or obese women in Central Georgia. Participants completed surveys related to their perception of risk for obesity-related pregnancy complications, readiness to change nutrition and physical activity behaviors, nutrition and physical activity self-efficacy, actual physical activity, and dietary history at baseline, after completion of the study, and at follow-up. Those in the intervention group participated in one face-to-face meeting, reviewed eight online education modules, and received weekly booster messages. The control group participated in a similar protocol; however, information was limited to general women’s health topics. Nineteen women (intervention = 11, control = 8) completed all instruments related to primary outcomes—perception of risk, readiness to change, and self-efficacy. The average age of participants was 28.7 years (SD = 6.35). The average body mass index was 36.54 kg/m2 (SD = 5.52). Women were predominately Caucasian (68.4%) and married (52.6%) with children (57.9%). Most had a college degree (42.1%) or higher (15.8%), and a yearly income between $25,000 and $75,000 (42.1%). Evaluation of completion data, resources, and intervention management indicated that the intervention may be feasible during preventative care visits. Participant responses to exit interview questions demonstrated the intervention may be acceptable for women of childbearing age. Effect sizes ranged from small (ƞp2= .00, p = .88) to large (ƞp2= .27, p = .08) indicating the intervention may be effective in an adequately powered sample. Future research should focus on the further development and implementation of programs that assist with pre-conception weight loss. Providing women with information regarding the complications associated with being overweight and obese, as well as the information or tools necessary to reduce weight prior to pregnancy, may be instrumental for improving short and long-term pregnancy outcomes for both mothers and their offspring.