Spelling suggestions: "subject:"nin"" "subject:"niin""
51 |
Imaginando a mulher: Pin-up, da chérette à playmate / Imagining the female: pin-up, of the chérette to playmateAntonio José Saggese 23 September 2008 (has links)
Análise da produção da imagem da mulher enquanto mercadoria na era moderna. O imaginário erótico na sociedade de consumo, na mídia gráfica do Século XIX ao Século XX. A imagem técnica e suas relações com a pintura acadêmica na representação da figura feminina e do nu, pela fotografia, cinema, ilustração e cartum. A pin-up sua origem e suas variações. / Analysis of the production of the female image as a commodity in modern age. The erotic imagery in the consumer society, in the graphic media from XIX to XX century. The technical image and its relation with the academic painting in the representation of the womens figure and the nude in the photography, cinema, illustration and cartoon. The pin-up, its origins and variations.
|
52 |
Pin-up ! Figures et usages de la pin-up cinématographique au temps du « pré-Code » (1930- 1934) / Pin-up ! A study of cinematographic pin-up figures during Pre-Code (1930-1934)Boissonneau, Mélanie 02 April 2013 (has links)
Cette thèse se propose de confronter un objet singulier, les pin-up, à un espace-temps tout aussi particulier : la période dite du pré-Code hollywoodien. Il s’agit tout d’abord de définir la pin-up comme figure féminine et cinématographique, et de proposer d’aller au-delà de la femme-objet qu’elle est censée incarner. L’étude attentive (par le biais notamment d’analyses de séquences) d’archétypes de pin-up produits entre 1930 et 1934 dans une perspective culturaliste influencée par les études de genre, permet, d’une part de déconstruire l’idée d’un pré-Code synonyme de liberté cinématographique. D’autre part, un retour sur l’histoire des pin-up et leur usage féministe potentiel, autorise cette figure féminine hyper-sexualisée à devenir un outil d’analyse des relations de genre, apte à révéler les mécanismes, parfois subtilement dissimulés, de la domination masculine. Les stratégies opposées par les personnages de pin-up au cadre patriarcal, sont à cet égard révélatrices. Les carrières cinématographiques de Betty Boop, de Jean Harlow, et de Mae West, étudiées sous cette lumière, indiquent quelles formes ces stratégies peuvent prendre. Les pin-up évoluant dans le genre de l’horreur et le personnage de Jane Parker incarné par Maureen 0’Sullivan durant les six premiers Tarzan de la MGM complètent ce passage en revue. La diversité des archétypes choisis fait in fine apparaître une difficulté commune aux pin-up cinématographiques, quel que soit leur statut ontologique : celle d’exister. / The goal of the present dissertation is to confront a specific object, the “pin-up”, to aspecific time and location: the so called « Pre code » Hollywood era. First of all, we wish todefine the pin-up as both a feminine and cinematographic figure, and to go beyond themere “woman as object “ that she is frequently reduced to. A careful study (relying, amongother, on sequence analysis) of pin-up archetypes created between 1930 and 1934 in acultural perspective, influenced by gender studies, makes it possible, first, to deconstructthe notion that Pre-code era has been a period of cinematographic freedom. Moreover,looking back at the history and evolution of the pin-up, and understanding how they can beused in a feminist agenda, helps turning this hypersexualised feminine figure into a deviceto analyze gender relationships, able to reveal the mechanisms, sometimes cleverlyconcealed, of masculine domination. In this respect, the strategies that pin-up charactersresort to in order to fight patriarchal order are revealing. Pin-up evolving in the horrorgenre, or the character of Jane Parker impersonated by Maureen O’Sullivan in MGM’s sixfirst Tarzan should complete this survey. The variety of archetypes that have been selectedhere seem, eventually, to lay bare a common difficulty, shared by all cinematographic pinup,regardless of their ontological status - their mere existence.
|
53 |
A study of spinels in the upper zone of the Stillwater Complex, MontanaDietrich, Donald R., 1950-, Dietrich, Donald R., 1950- January 1986 (has links)
No description available.
|
54 |
Mechanismus přenosu auxinu přes plazmatickou membránu prostřednictvím proteinů PIN / Mechanism of auxin transport across plasma membrane through PIN auxin efflux carriersLefnar, Radek January 2017 (has links)
Phytohormone auxin and its directional distribution plays an essential role in the regulation of numerous processes during vegetative and reproductive plant development. Regulation of the expression, localization and activity of the PIN-FORMED (PIN) proteins is important for proper polar auxin transport in plant tissues. PIN proteins have been described as the major auxin efflux carriers regulating auxin's directional flow to build up gradients that provide information for the coordination of plant development. PIN protein structure topology prediction through bioinformatic analysis is still insufficient to understand their transport mechanism. Experimental analysis of PIN protein domains can provide valuable insight into understanding their role in mediating auxin transport. In this study, the C-terminal part of PINs have been modified by gradual trimming to determine the existence of relevant functional domains, which could be important for auxin transport. Seven modified PIN proteins from Arabidopsis thaliana and Nicotiana tabacum were prepared. Transiently transformed tobacco cell line Bright Yellow-2 (BY-2) was used to monitor differences in PIN transport activity. This approach allowed indirect monitoring of intracellular auxin levels using the DR5 reporter system. Transiently expressed...
|
55 |
Rekonfigurovatelná flíčková anténa / Reconfigurable patch antennaZlatníček, Radek January 2011 (has links)
The master's thesis deals with the design and implementation of a reconfigurable patch antenna. The antenna is fed by a microstrip transmission line. To the microstrip feeder, tuning stubs are connected. Each stub matches the input impedance of the antenna to 50 ? for different operation frequencies. Stubs can be individually connected to the feeder by PIN diodes; operation frequency of the antenna can be switched that way. In the project, the antenna is initially designed for antenna substrate RO3006. Then, the design will be converted to the substrate ARLON AD600 selected for the realization. In the project, modifications of stubs will be proposed to properly connect the PIN diodes. Functionality of the designed antenna will be verified by modeling in Ansoft Designer. The last part will be dealt with implementation of the antenna and the experimental measurement of their properties.
|
56 |
Nízkošumový zesilovač pro pásmo 70 cm / Low noise 70 cm band amplifierKlügl, Jan January 2014 (has links)
This master's thesis is engage in suggestion of low noise 70 cm band amplifier with filter and diode attenuator. At first the thesis describes the basic parameters of amplifier, for example gain, noise figure and dynamic extent. Later in detail describes individual parts, which are the device consist of. At every part of system is mentioned the diagram of connection and values of components, which are ascertained from calculation, simulation and recommendation of producer. The characteristic parameters of amplifier were measured after construction.
|
57 |
An analytical appraisal of copper alloy pin production: 400-1600 AD: The development of the copper alloy, pin industry in Britain during the post-Roman period, based on analytical, metallographic and typological examination with consideration of historical and archaeological archives.Caple, Christopher January 1986 (has links)
No description available.
|
58 |
Optimal Pin Fin Heat Exchanger SurfaceNabati, Hamid January 2008 (has links)
<p>This research presents the results of numerical study of heat transfer and pressure drop in a heat exchanger that is designed with different shape pin fins. The heat exchanger used for this research consists of a rectangular duct fitted with different shape pin fins, and is heated from the lower plate. The pin shape and the compact heat exchanger (CHE) configuration were numerically studied to maximize the heat transfer and minimize the pressure drop across the heat exchanger. A three dimensional finite volume based numerical model using FLUENT© was used to analyze the heat transfer characteristics of various pin fin heat exchangers. The simulation applied to estimate the heat transfer coefficient and pressure drop for a wide range of Reynolds numbers with different pin fins. Circular pin configuration variations included changes in pin spacing, axial pitch and pin height ratio. Rectangular and drop-shaped pin variations also included changes in length and aspect ratio. Correlations for Nusselt number and friction factor were developed. The optimum drop shaped pin array was shown to match the heat transfer rates obtained by the optimum circular pin configuration while incurring less than one third the specific fluid friction power losses. The data and conclusions of this study can be applied to the optimization of different heat exchangers which are used in industry, especially oil cooler in power transformers which are currently working with low cooling efficiency. It can also be used in the design of electronic components, turbine blade cooling or in other high heat flux dissipation applications requiring a low-profile, high area-density based micro-heat exchanger design. This study also shows that numerical models backed with experimental analysis can reduce both the time and money required to create and evaluate engineering concepts, especially those that deal with fluid flow and heat transfer. In the following chapters, first the problems which are encountered by power transformer suppliers are described. Then pin fin technology is studied with more details as a novel solution to the oil cooling problem. Some studies on behavior of power transformer coolers are also conducted to make their problems more clear. Available experimental data in the Iran Transfo company have been used for validation of these studies. They are presented as separated papers at the end of thesis. Finally the results of pin fin studies are presented and horizontal continuous casting (HCC) is explained as a manufacturing method for pin fins production. A separate paper which is based on experimental study on HCC is also included at the end of thesis.</p> / <p>Forskningen presenterad är ett resultat av en numerisk studie av värmeöverföring och tryckfall i en värmeväxlare designad med olika former av Kylflänsar. Värmeväxlaren består av ett rektangulärt kanal utrustat med olika former av Kylflänsar och är uppvärmd underifrån. Kylflänsar forma och den kompakta värmeväxlarens utformning är studerade numeriskt för att maximera värmeöverföringen och minimera tryckfallet över värmeväxlaren.En tredimensionell finit volym baserad på en numerisk modell i FLUENT© användes för att analysera värmeöverföringsegenskaper för olika Kylflänsar konfigurationer. Genom simuleringar uppskattades värmegenomgångstalet och tryckfallet för olika Reynolds tal och Kylflänsar konfigureringar. Cirkulära Kylflänsar konfigurationer inkluderar variation av avstånd mellan Kylflänsar, och förhållandet mellan axiellt avstånd och höjd. Rektangulära och droppformade Kylflänsar inkluderade även variation för längd och aspekt förhållande. Korrelation mellan Nusselts tal och friktionsfaktor utvecklades. Optimal matris för hur droppformade Kylflänsar placerades visades överensstämma med optimal överföring för cirkulära Kylflänsar men bara med en tredjedel av friktionsförlusterna för fluiden. Data och slutsatser från studien kan användas inom för optimering av värmeväxlare använda i industrin, speciellt oljekylda högspänningstransformatorer som har låg effektivitet i kylningen. Resultaten kan även användas inom design av elektronikkomponenter, kylning av turbinblad eller andra komponenter med högt värmeflöde där låg profil, och stor ytdensitet behövs. Studien visar att kombinationen av numeriska modeller som valideras genom experiment kan reducera både tid och kostnad vid utveckling och utvärdering av ingenjörsverktyg, speciellt inom fluidmekanik och värmeöverföring. I följande kapitel beskrivs först problem som identifierats av tillverkare av högspänningstransformatorer. Kylflänsar studeras i detalj som en ny lösning till de identifierade problemen med oljekylning. Några studier har genomförts för att ytterligare belysa problemen kring högspänningstransformatorers kylning. Tillgängliga data från Iran Transfo company har använts för validering av resultat från studierna. Studierna presenteras som separata artiklar i slutet av avhandlingen. Avslutningsvis presenteras resultat från studierna av Kylflänsar och en horisontell kontinuerlig gjutprocess (HCC) för tillverkning av Kylflänsar. HCC-studien presenteras som en separat artikel inkluderad sist i avhandlingen.</p>
|
59 |
Optimal Pin Fin Heat Exchanger SurfaceNabati, Hamid January 2008 (has links)
This research presents the results of numerical study of heat transfer and pressure drop in a heat exchanger that is designed with different shape pin fins. The heat exchanger used for this research consists of a rectangular duct fitted with different shape pin fins, and is heated from the lower plate. The pin shape and the compact heat exchanger (CHE) configuration were numerically studied to maximize the heat transfer and minimize the pressure drop across the heat exchanger. A three dimensional finite volume based numerical model using FLUENT© was used to analyze the heat transfer characteristics of various pin fin heat exchangers. The simulation applied to estimate the heat transfer coefficient and pressure drop for a wide range of Reynolds numbers with different pin fins. Circular pin configuration variations included changes in pin spacing, axial pitch and pin height ratio. Rectangular and drop-shaped pin variations also included changes in length and aspect ratio. Correlations for Nusselt number and friction factor were developed. The optimum drop shaped pin array was shown to match the heat transfer rates obtained by the optimum circular pin configuration while incurring less than one third the specific fluid friction power losses. The data and conclusions of this study can be applied to the optimization of different heat exchangers which are used in industry, especially oil cooler in power transformers which are currently working with low cooling efficiency. It can also be used in the design of electronic components, turbine blade cooling or in other high heat flux dissipation applications requiring a low-profile, high area-density based micro-heat exchanger design. This study also shows that numerical models backed with experimental analysis can reduce both the time and money required to create and evaluate engineering concepts, especially those that deal with fluid flow and heat transfer. In the following chapters, first the problems which are encountered by power transformer suppliers are described. Then pin fin technology is studied with more details as a novel solution to the oil cooling problem. Some studies on behavior of power transformer coolers are also conducted to make their problems more clear. Available experimental data in the Iran Transfo company have been used for validation of these studies. They are presented as separated papers at the end of thesis. Finally the results of pin fin studies are presented and horizontal continuous casting (HCC) is explained as a manufacturing method for pin fins production. A separate paper which is based on experimental study on HCC is also included at the end of thesis. / Forskningen presenterad är ett resultat av en numerisk studie av värmeöverföring och tryckfall i en värmeväxlare designad med olika former av Kylflänsar. Värmeväxlaren består av ett rektangulärt kanal utrustat med olika former av Kylflänsar och är uppvärmd underifrån. Kylflänsar forma och den kompakta värmeväxlarens utformning är studerade numeriskt för att maximera värmeöverföringen och minimera tryckfallet över värmeväxlaren.En tredimensionell finit volym baserad på en numerisk modell i FLUENT© användes för att analysera värmeöverföringsegenskaper för olika Kylflänsar konfigurationer. Genom simuleringar uppskattades värmegenomgångstalet och tryckfallet för olika Reynolds tal och Kylflänsar konfigureringar. Cirkulära Kylflänsar konfigurationer inkluderar variation av avstånd mellan Kylflänsar, och förhållandet mellan axiellt avstånd och höjd. Rektangulära och droppformade Kylflänsar inkluderade även variation för längd och aspekt förhållande. Korrelation mellan Nusselts tal och friktionsfaktor utvecklades. Optimal matris för hur droppformade Kylflänsar placerades visades överensstämma med optimal överföring för cirkulära Kylflänsar men bara med en tredjedel av friktionsförlusterna för fluiden. Data och slutsatser från studien kan användas inom för optimering av värmeväxlare använda i industrin, speciellt oljekylda högspänningstransformatorer som har låg effektivitet i kylningen. Resultaten kan även användas inom design av elektronikkomponenter, kylning av turbinblad eller andra komponenter med högt värmeflöde där låg profil, och stor ytdensitet behövs. Studien visar att kombinationen av numeriska modeller som valideras genom experiment kan reducera både tid och kostnad vid utveckling och utvärdering av ingenjörsverktyg, speciellt inom fluidmekanik och värmeöverföring. I följande kapitel beskrivs först problem som identifierats av tillverkare av högspänningstransformatorer. Kylflänsar studeras i detalj som en ny lösning till de identifierade problemen med oljekylning. Några studier har genomförts för att ytterligare belysa problemen kring högspänningstransformatorers kylning. Tillgängliga data från Iran Transfo company har använts för validering av resultat från studierna. Studierna presenteras som separata artiklar i slutet av avhandlingen. Avslutningsvis presenteras resultat från studierna av Kylflänsar och en horisontell kontinuerlig gjutprocess (HCC) för tillverkning av Kylflänsar. HCC-studien presenteras som en separat artikel inkluderad sist i avhandlingen.
|
60 |
On Pin-to-wire Routing in FPGAsShah, Niyati 26 November 2012 (has links)
While FPGA interconnect networks were originally designed to connect logic block output pins to input pins, FPGA users and architects sometimes become motivated to create connections between pins and specific wires in the interconnect. These pin-to-wire connections are motivated by both a desire to employ routing-by-abutment, in modular, pre-laid out systems, and to make direct use of resources in the fabric itself. The goal of
this work is to measure the difficulty of forming such pin-to-wire connections. We show
that compared to a flat placement of the complete system, the routed wirelength and
critical path delay increase by 6% and 15% respectively, and the router effort increases 3.5 times. We show that while pin-to-wire connections impose increased stress on the router, they can be used under some circumstances. We also measure the impact of increasing routing architecture flexibility on these results, and propose a low-cost enhancement to improve pin-to-wire routing.
|
Page generated in 0.1022 seconds