Submitted by Erik de Lima Andrade null (erik_andrade88@hotmail.com) on 2017-03-06T18:12:25Z No. of bitstreams: 1 Dissertação_Erik de Lima Andrade.pdf: 2096082 bytes, checksum: fdfbde2d75d685f0c1cda5fc47b0b3f1 (MD5) / Approved for entry into archive by Juliano Benedito Ferreira (julianoferreira@reitoria.unesp.br) on 2017-03-10T14:43:15Z (GMT) No. of bitstreams: 1 andrade_el_me_soro.pdf: 2096082 bytes, checksum: fdfbde2d75d685f0c1cda5fc47b0b3f1 (MD5) / Made available in DSpace on 2017-03-10T14:43:15Z (GMT). No. of bitstreams: 1 andrade_el_me_soro.pdf: 2096082 bytes, checksum: fdfbde2d75d685f0c1cda5fc47b0b3f1 (MD5) Previous issue date: 2017-02-09 / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / A adequação no tratamento da água, para abastecimento público envolve a compreensão da vulnerabilidade de mananciais e de situações de risco à saúde humana. Da mesma forma, o sucesso do tratamento de água de superfície depende, fortemente, da eficácia do desempenho do coagulante. Com a qualidade dos mananciais comprometida por diferentes cenários, tornase indispensável, o processo de desenvolvimento de abordagens eficazes para as questões de caráter econômico e ambiental. O tratamento de água de superfície objetiva, de modo geral, a remoção de impurezas com o propósito de enquadrá-la no padrão de potabilidade, essencialmente, através do uso de produtos químicos. Neste sentido, o presente trabalho analisou a eficiência de três produtos comerciais: sulfato de alumínio, policloreto de alumínio e PGα21Ca. Para tanto, foram realizados ensaios de coagulação-floculação e sedimentação, em água da ETA de Salto de Pirapora, São Paulo, Brasil. Os resultados obtidos do PGα21Ca revelam caráter, essencialmente, inorgânico, com teores elevados de sulfato de cálcio (87%) e 5% de ácido γ-poliglutâmico, entre outros compostos químicos. O PGα21Ca apresentou maior eficiência de remoção de turbidez e cor aparente, com valores de 1,93 NTU de turbidez remanescente e 96,89% de remoção de cor aparente e pouca alteração no pH do meio, demonstrando efetividade para o tratamento de água para abastecimento público. O PAC apresentou resultados inferiores para clarificação da água quando comparado ao PGα21Ca e melhores resultados quando comparado ao sulfato de alumínio. Utilizando-se o PGα21Ca em água de Rio Grande, não obtém-se resultados tão expressivos quando comparado a água da ETA de Salto de Pirapora. / The suitability in the treatment of water for public supply involves understanding the vulnerability of sources and situations of risk to human health. Similarly, the success of surface water treatment depends strongly on the effectiveness of the coagulant performance. With the quality of water sources compromised by different scenarios, it is essential to the effective approaches development process for the economic and environmental character issues. The water treatment lens surface generally the removal of impurities in order to fit it in potable standard, mainly through the use of chemicals. In this sense, the present study examined the effectiveness of three commercial products: aluminum sulphate, polyaluminum chloride and PGα21Ca. Therefore, tests were carried out coagulation-flocculation and sedimentation in water of Salto de Pirapora WTP, São Paulo, Brazil. The results obtained reveal the character PGα21Ca essentially inorganic, with high levels of calcium sulfate (87%) and 5% γ-polyglutamic acid, and other chemical compounds. The PGα21Ca showed higher turbidity and apparent color removal efficiency, with values of 1.93 NTU turbidity and remaining 96.89% removal of apparent color and little change in pH of the medium, demonstrating the effectiveness for water treatment. The PAC presented lower results for clarification of water when compared to PGα21Ca and better results when compared to aluminum sulfate. Using PGα21Ca in Rio Grande water did not obtain significant results when compared to the water of the Salto de Pirapora WTP. / FAPESP: 2015/02650-8

Este trabalho teve como objetivo avaliar diversos métodos de detecção e recuperação de cistos de Giardia spp. e de oocistos de Cryptosporidium parvum em resíduos gerados no tratamento de águas de abastecimento com turbidez elevada tendo como padrão o Método 1623.1 da USEPA (2012 ). Para tanto, ensaios utilizando aparelho Jarteste (coagulação, floculação, decantação e filtração ) foram realizados utilizando o coagulante cloreto de polialumínio - PAC. Em todos os métodos avaliados foi utilizada a técnica de purificação por separação imunomagnética - IMS. A adaptação do método floculação em carbonato de cálcio FCCa elaborado por Vesey et al. (1993) e adaptado por Feng et al. (2011), repercutiu nos melhores resultados para a amostra de resíduo sedimentado, com recuperações de 68 ± 17 % para oocisto de C. parvum e de 42 ± 7 % para cisto de Giardia spp. Entretanto, as recuperações para a amostra de água de lavagem dos filtros - ALF foram inferiores à 1 %, não sendo possível determinar um método adequado. A presença dos patógenos indica que o reuso da ALF em ETA convencionais ou o descarte em mananciais sem um tratamento prévio, pode representar problemas de contaminação. A adaptação dos métodos de Boni de Oliveira (2012) e Keegan et al. (2008), também repercutiram em porcentagens de recuperação expressivas para a amostra de resíduo sedimentado, sendo de: 41 ± 35 % para oocisto de C. parvum e 11 ± 70 % para cisto de Giardia spp., e 38 ± 26 % para oocisto de C. parvum e 26 ± 13 % para cisto de Giardia spp., respectivamente. A análise estatística não resultou em diferença significativa entre estes dois métodos, entretanto, as elevadas recuperações indicam que estes métodos podem ser melhor avaliados em pesquisas futuras. / This dissertation addresses the evaluation of several methods for the detection of Giardia spp. cysts and Cryptosporidium parvum oocysts in wastes produced after a high-turbidity water treatment, according to Method 1623.1 from USEPA (2012). Coagulant polyaluminium chloride - PACl was used in jar test experiments (coagulation/flocculation, sedimentation and filtration ). The Immunomagnetic Separation - IMS technique was applied to all methods. The calcium carbonate flocculation (CCF) method, developed by Vesey et al. (1993) and adapted by Feng et al. (2011 ), was applied to sludge samples in this research and was the best method tested, with 68% ± 17 % and 42 % ± 7,00 % recoveries for C. parvum oocysts and Giardia spp. cysts, respectively. On the other hand, the percentage recovery of (oo)cysts for filter backwash water samples was lower than 1 % and no suitable method could be detected. The presence of pathogens represents contamination risks for water sources and the reuse of filter backwash water may be a problem to conventional water treatment plants. The application of Boni de Oliveira (2012) and Keegan et al. (2008) methods, adjusted to this study, also resulted in significant percentage recoveries for the sludge samples, with 41 ± 35 % for C. parvum oocyst and 11 ± 70% for cyst Giardia spp., and 38 ± 26% for oocyst C. parvum and 26 ± 13% for cyst Giardia spp., respectively. The statistical analysis showed no significant differences between the two methods, however, such high recoveries indicate they should be better evaluated in future research.

O objetivo deste trabalho foi avaliar o desempenho da remoção de cistos deGiardia spp. e oocistos de Cryptosporidium parvum, em águas de abastecimento com turbidez elevada, em experimentos em escala de bancada (coagulação, floculação, decantação e filtração). Para tanto, empregou-se o coagulante cloreto de polialumínio – PAC. O método de filtração em membranas foi adotado para a concentração de protozoários, seguido ou não da etapa de purificação por separação imunomagnética – IMS. Os métodos foram avaliados em experimentos de controle de qualidade analítica e o método sem IMS apresentou as seguintes porcentagens de recuperação, 80% ±16,32% para cistos de Giardia spp. e 5% ±10,00% para oocistos de C. parvum. O método com IMS apresentou 31,5%±7,55% de recuperação para cistos de Giardia spp. e 5,75%±3,20% de recuperação para oocistos de C. parvum. Os experimentos demonstraram que não houve melhora na remoção de ambos os protozoários na condição de maior dosagem de coagulante (65 mg.L-1 de PAC e pH 7,29). A condição de menor dosagem de coagulante (25 mg.L-1 de PAC e pH 6,76) apresentou um desempenho melhor, ao contrário de uma expectativa de que a maior dosagem de coagulante pudesse favorecer a remoção destes microrganismos. A condição de menor dosagem apresentou, na água filtrada, 50 e 75% de ausência de identificação de cistos de Giardia e oocistos de C. parvum, respectivamente. A condição de maior dosagem apresentou (oo)cistos na água filtrada de todas amostras analisadas. Estes resultados indicam a importância do controle da coagulação na remoção de protozoários. / The aim of this study was to evaluate the performance of Giardia spp. cysts and Cryptosporidium parvum oocysts removal in a bench scale experiment. The coagulant polyaluminium chloride – PACl was used in this research. The protozoa concentration tests were performed by applying the Membrane Filtration method, with and without Immunomagnetic Separation assay-IMS. The methods were evaluated using control experiments and the method without IMS had the following percentage recovery, 80% ± 16.32% and 5% ±10.00% for Giardia cysts and C. parvum oocysts, respectively. The method with IMS presented 31.5% ± 7.55% and 5.75% ± 3.20% of percentage recovery for Giardia cysts and C. parvum oocysts, respectively. Bench scale experimental results have clearly shown that there was no improvement in protozoa removal using the superior dosage of coagulant. The inferior dosage condition (25 mg.L-1 of PACl and pH 6,76) performed better, which was contrary to what was expected in which a superior dosage of coagulant could favour when removing microorganisms. The inferior dosage condition presented 50% and 75% of absence of Giardia cysts and C. parvum oocysts in the final water, respectively. The second coagulation condition (65 mg.L-1 of PACl and pH 7,29) presented protozoa (oo)cysts in the final water of all the samples examined. These results indicate the importance of coagulation control in protozoa removal.

Over the past decade, the objectives for coagulation based drinking water treatment processes have changed significantly. These changes are a result of stringent goals related to natural organic matter (NOM) removal to mitigate the formation of subsequent harmful and health-related disinfection by-products (DBPs) and the need to achieve adequate filtration performance to ensure sufficient particle removal for pathogen control. Another concern associated with coagulation optimization is the potential unintended consequences of a coagulant change on the distribution system, specifically related to lead release from lead pipe and solder materials. Optimizing these multi-objectives in a direct filtration treatment process presents significant challenges for source waters characterized by low levels of turbidity, alkalinity and organic matter content. Bench and pilot-scale experiments were conducted to evaluate the performance of ferric sulfate, polyaluminum chloride (PACl) and aluminum chlorohydrate (ACH) against aluminum sulfate (alum) using variable coagulation dosage and pH conditions for a direct filtration facility. Bench-scale experiments were conducted to optimize NOM removal during coagulation using traditional organic matter surrogates coupled with molecular size characterization techniques. Pilot-scale studies provided a snapshot of feasibility in terms of filtration performance for favourable bench-scale conditions and also identified optimal conditions for filtration performance. Results from pilot testing demonstrated that favourable conditions identified for increased potential NOM removals during bench-scale testing were significantly different than optimal filtration conditions identified during pilot studies; and, in fact, severely compromised direct filtration performance due to increased solids loading to the filters. Bench-scale experiments evaluated lead leaching from lead and lead:tin solder galvanically connected to copper under stagnant conditions using variable chloride-to-sulfate mass ratio (CSMR) conditions for alum, ferric sulfate and PACl. Although recent research identifies high CSMRs (>0.5) as the main mechanism of attack in distribution systems following coagulant changeovers, CSMR was not the primary catalyst for lead leaching following the coagulant changeover conditions evaluated in this study. Residual concentrations of iron and aluminum remaining following coagulation were the principal contributors. Positive correlations were revealed between particulate iron and particulate lead concentrations following stagnation demonstrating that the adsorption of lead to iron oxides is a viable hypothesis for lead release.

Este trabalho teve como objetivo avaliar diversos métodos de detecção e recuperação de cistos de Giardia spp. e de oocistos de Cryptosporidium parvum em resíduos gerados no tratamento de águas de abastecimento com turbidez elevada tendo como padrão o Método 1623.1 da USEPA (2012 ). Para tanto, ensaios utilizando aparelho Jarteste (coagulação, floculação, decantação e filtração ) foram realizados utilizando o coagulante cloreto de polialumínio - PAC. Em todos os métodos avaliados foi utilizada a técnica de purificação por separação imunomagnética - IMS. A adaptação do método floculação em carbonato de cálcio FCCa elaborado por Vesey et al. (1993) e adaptado por Feng et al. (2011), repercutiu nos melhores resultados para a amostra de resíduo sedimentado, com recuperações de 68 ± 17 % para oocisto de C. parvum e de 42 ± 7 % para cisto de Giardia spp. Entretanto, as recuperações para a amostra de água de lavagem dos filtros - ALF foram inferiores à 1 %, não sendo possível determinar um método adequado. A presença dos patógenos indica que o reuso da ALF em ETA convencionais ou o descarte em mananciais sem um tratamento prévio, pode representar problemas de contaminação. A adaptação dos métodos de Boni de Oliveira (2012) e Keegan et al. (2008), também repercutiram em porcentagens de recuperação expressivas para a amostra de resíduo sedimentado, sendo de: 41 ± 35 % para oocisto de C. parvum e 11 ± 70 % para cisto de Giardia spp., e 38 ± 26 % para oocisto de C. parvum e 26 ± 13 % para cisto de Giardia spp., respectivamente. A análise estatística não resultou em diferença significativa entre estes dois métodos, entretanto, as elevadas recuperações indicam que estes métodos podem ser melhor avaliados em pesquisas futuras. / This dissertation addresses the evaluation of several methods for the detection of Giardia spp. cysts and Cryptosporidium parvum oocysts in wastes produced after a high-turbidity water treatment, according to Method 1623.1 from USEPA (2012). Coagulant polyaluminium chloride - PACl was used in jar test experiments (coagulation/flocculation, sedimentation and filtration ). The Immunomagnetic Separation - IMS technique was applied to all methods. The calcium carbonate flocculation (CCF) method, developed by Vesey et al. (1993) and adapted by Feng et al. (2011 ), was applied to sludge samples in this research and was the best method tested, with 68% ± 17 % and 42 % ± 7,00 % recoveries for C. parvum oocysts and Giardia spp. cysts, respectively. On the other hand, the percentage recovery of (oo)cysts for filter backwash water samples was lower than 1 % and no suitable method could be detected. The presence of pathogens represents contamination risks for water sources and the reuse of filter backwash water may be a problem to conventional water treatment plants. The application of Boni de Oliveira (2012) and Keegan et al. (2008) methods, adjusted to this study, also resulted in significant percentage recoveries for the sludge samples, with 41 ± 35 % for C. parvum oocyst and 11 ± 70% for cyst Giardia spp., and 38 ± 26% for oocyst C. parvum and 26 ± 13% for cyst Giardia spp., respectively. The statistical analysis showed no significant differences between the two methods, however, such high recoveries indicate they should be better evaluated in future research.

O objetivo deste trabalho foi avaliar o desempenho da remoção de cistos deGiardia spp. e oocistos de Cryptosporidium parvum, em águas de abastecimento com turbidez elevada, em experimentos em escala de bancada (coagulação, floculação, decantação e filtração). Para tanto, empregou-se o coagulante cloreto de polialumínio – PAC. O método de filtração em membranas foi adotado para a concentração de protozoários, seguido ou não da etapa de purificação por separação imunomagnética – IMS. Os métodos foram avaliados em experimentos de controle de qualidade analítica e o método sem IMS apresentou as seguintes porcentagens de recuperação, 80% ±16,32% para cistos de Giardia spp. e 5% ±10,00% para oocistos de C. parvum. O método com IMS apresentou 31,5%±7,55% de recuperação para cistos de Giardia spp. e 5,75%±3,20% de recuperação para oocistos de C. parvum. Os experimentos demonstraram que não houve melhora na remoção de ambos os protozoários na condição de maior dosagem de coagulante (65 mg.L-1 de PAC e pH 7,29). A condição de menor dosagem de coagulante (25 mg.L-1 de PAC e pH 6,76) apresentou um desempenho melhor, ao contrário de uma expectativa de que a maior dosagem de coagulante pudesse favorecer a remoção destes microrganismos. A condição de menor dosagem apresentou, na água filtrada, 50 e 75% de ausência de identificação de cistos de Giardia e oocistos de C. parvum, respectivamente. A condição de maior dosagem apresentou (oo)cistos na água filtrada de todas amostras analisadas. Estes resultados indicam a importância do controle da coagulação na remoção de protozoários. / The aim of this study was to evaluate the performance of Giardia spp. cysts and Cryptosporidium parvum oocysts removal in a bench scale experiment. The coagulant polyaluminium chloride – PACl was used in this research. The protozoa concentration tests were performed by applying the Membrane Filtration method, with and without Immunomagnetic Separation assay-IMS. The methods were evaluated using control experiments and the method without IMS had the following percentage recovery, 80% ± 16.32% and 5% ±10.00% for Giardia cysts and C. parvum oocysts, respectively. The method with IMS presented 31.5% ± 7.55% and 5.75% ± 3.20% of percentage recovery for Giardia cysts and C. parvum oocysts, respectively. Bench scale experimental results have clearly shown that there was no improvement in protozoa removal using the superior dosage of coagulant. The inferior dosage condition (25 mg.L-1 of PACl and pH 6,76) performed better, which was contrary to what was expected in which a superior dosage of coagulant could favour when removing microorganisms. The inferior dosage condition presented 50% and 75% of absence of Giardia cysts and C. parvum oocysts in the final water, respectively. The second coagulation condition (65 mg.L-1 of PACl and pH 7,29) presented protozoa (oo)cysts in the final water of all the samples examined. These results indicate the importance of coagulation control in protozoa removal.

In this research, five different coagulants were evaluated to determine their effectiveness at removing turbidity, color and dissolved organic carbon (DOC) from a surface water in Sarasota County, Florida. Bench-scale jar tests that simulated conventional coagulation, flocculation, and sedimentation processes were used. Iron-based coagulants (ferric chloride and ferric sulfate) and aluminum-based coagulants (aluminum sulfate, polyaluminum chloride (PACl) and aluminum chlorohydrate (ACH)) were used to treat a highly organic surface water supply (DOC ranging between 10 and 30 mg/L), known as the Cow Pen Slough, located within central Sarasota County, Florida. Isopleths depicting DOC and color removal efficiencies as a function of both pH and coagulant dose were developed and evaluated. Ferric chloride and ACH were observed to obtain the highest DOC (85% and 70%, respectively) and color (98% and 97%, respectively) removals at the lowest dose concentrations (120 mg/L and 100 mg/L, respectively). Ferric sulfate was effective at DOC removal but required a higher concentration of coagulant and was the least effective coagulant at removing color. The traditional iron-based coagulants and alum had low turbidity removals and they were often observed to add turbidity to the water. PACl and ACH had similar percent removals for color and turbidity achieving consistent percent removals of 95% and 45%, respectively, but PACl was less effective than ACH at removing organics. Sludge settling curves, dose-sludge production ratios, and settling velocities were determined at optimum DOC removal conditions for each coagulant. Ferric chloride was found to have the highest sludge settling rate but also produced the largest sludge quantities. Total trihalomethane formation potential (THMFP) was measured iv for the water treated with ferric chloride and ACH. As with DOC removal, ferric chloride yielded a higher percent reduction with respect to THMFP.

Lead is a known toxin, with the ability to accumulate in the human body from as early as fetal development. Lead exposure is known to cause a myriad of health effects which are more prominent among children. Health effects upon exposure can range from renal and heart disease or potentially cancer in adults to neurotoxicity in children. The continued presence of old lead service lines and plumbing in distribution systems as well as lead-containing solders and brass fixtures in homes may contribute lead to drinking water. Recent studies have highlighted the importance of a predictor known as the chloride-to-sulfate mass ratio (CSMR) in controlling lead release. A ratio above 0.5 – 0.6 theoretically increases the aggressiveness of lead leaching in galvanic settings, while a lower ratio controls lead corrosion. A switch in coagulant type could significantly alter the ratio. However, a coagulant switch could also trigger changes in finished water turbidity and organics, including disinfection by-product (DBP) precursors, as well as impact sludge production. Anecdotal evidence from an Ontario water treatment utility suggested the potential applicability of a newly formulated polymer, cationic activated silica (CAS), in improving DBP precursor removal when used in concurrence with a primary coagulant. No previous scientific research had been dedicated to testing of the polymer. The present research had three primary objectives: The first was to investigate the effect of conventional coagulation with six different coagulants on the chloride-to-sulfate mass ratio as it pertains to lead corrosion in two Ontario source waters of differing quality. Additionally, the effect of coagulant choice on pH, turbidity, and organics removal was investigated. The second objective was aimed at testing potential reductions in CSMR and organics that could be brought about by the use of two polymers, cationic and anionic activated silica (CAS and AAS, respectively), as flocculant aids. Finally, the performance of a high-rate sand-ballasted clarification process was simulated at bench-scale to gauge its performance in comparison with conventional coagulation simulation techniques. The first series of jar-tests investigated the effectiveness of CAS as a primary coagulant on Lake Ontario water. In comparison with the conventional coagulants aluminum sulfate and polyaluminum chloride, CAS did not offer any apparent advantage with respect to turbidity and organics removal. Testing of CAS and AAS as flocculant aids was also conducted. Results from a full factorial experiment focused on CAS testing on Lake Ontario water showed that coagulant dose is the most significant contributor to CSMR, turbidity, DOC removal, and THM control. Generally, improvements resulting from CAS addition were of small magnitude (<15%). Reductions in CSMR were attributed to the presence of the sulfate-containing chemicals alum and sulfuric acid in the CAS formulation. Testing of sulfuric acid-activated AAS on Grand River water showed that pairing of AAS with polyaluminum chloride provides better results than with alum with respect to DOC removal (39% and 27% respectively at 60 mg/L coagulant dose). Highest turbidity removals (>90%) with both coagulants were achieved at the tested coagulant and AAS doses of 10 mg/L and 4 mg/L respectively. CSMR reductions in the presence of AAS were also attributable to sulfate contribution from sulfuric acid. Bench-scale simulation of a high-rate sand-ballasted clarification process on Grand River water showed comparable removal efficiencies for turbidity (80 – 90% at 10 mg/L), and DOC (30 – 40% at 50 mg/L). Finally, six different coagulants were tested on the two source waters for potential applicability in CSMR adjustment in the context of lead corrosion. The two chloride-containing coagulants polyaluminum chloride and aluminum chlorohydrate increased CSMR in proportion to the coagulant dose added, as would be expected. Average chloride contribution per 10 mg/L coagulant dose was 2.7 mg/L and 2.0 mg/L for polyaluminum chloride and aluminum chlorohydrate, respectively. Sulfate-contributing coagulants aluminum sulfate, ferric sulfate, pre-hydroxylated aluminum sulfate, and polyaluminum silicate sulfate reduced CSMR as coagulant dose increased, also as would be expected. The highest sulfate contributors per 10 mg/L dose were pre-hydroxylated aluminum sulfate (6.2 mg/L) and ferric sulfate (6.0 mg/L). The lowest CSMR achieved was 0.6 in Lake Ontario water at a 30 mg/L dose and 0.8 in Grand River water at a 60 mg/L dose. Highest DOC removals were achieved with the chloride-containing coagulants in both waters (35 – 50%) with aluminum chlorohydrate showing superiority in that respect. DOC removals with sulfate-containing coagulants were less, generally in the range of 22 – 41%. Specificity of critical CSMR values to source water needs to be investigated. Additionally, long term effects of sustained high or low CSMR values in distribution systems need to be further looked into. Finally, the effect of interventions to alter CSMR on other water quality parameters influencing lead corrosion such as pH and alkalinity still represent a research deficit.

Lead is a known toxin, with the ability to accumulate in the human body from as early as fetal development. Lead exposure is known to cause a myriad of health effects which are more prominent among children. Health effects upon exposure can range from renal and heart disease or potentially cancer in adults to neurotoxicity in children. The continued presence of old lead service lines and plumbing in distribution systems as well as lead-containing solders and brass fixtures in homes may contribute lead to drinking water. Recent studies have highlighted the importance of a predictor known as the chloride-to-sulfate mass ratio (CSMR) in controlling lead release. A ratio above 0.5 – 0.6 theoretically increases the aggressiveness of lead leaching in galvanic settings, while a lower ratio controls lead corrosion. A switch in coagulant type could significantly alter the ratio. However, a coagulant switch could also trigger changes in finished water turbidity and organics, including disinfection by-product (DBP) precursors, as well as impact sludge production. Anecdotal evidence from an Ontario water treatment utility suggested the potential applicability of a newly formulated polymer, cationic activated silica (CAS), in improving DBP precursor removal when used in concurrence with a primary coagulant. No previous scientific research had been dedicated to testing of the polymer. The present research had three primary objectives: The first was to investigate the effect of conventional coagulation with six different coagulants on the chloride-to-sulfate mass ratio as it pertains to lead corrosion in two Ontario source waters of differing quality. Additionally, the effect of coagulant choice on pH, turbidity, and organics removal was investigated. The second objective was aimed at testing potential reductions in CSMR and organics that could be brought about by the use of two polymers, cationic and anionic activated silica (CAS and AAS, respectively), as flocculant aids. Finally, the performance of a high-rate sand-ballasted clarification process was simulated at bench-scale to gauge its performance in comparison with conventional coagulation simulation techniques. The first series of jar-tests investigated the effectiveness of CAS as a primary coagulant on Lake Ontario water. In comparison with the conventional coagulants aluminum sulfate and polyaluminum chloride, CAS did not offer any apparent advantage with respect to turbidity and organics removal. Testing of CAS and AAS as flocculant aids was also conducted. Results from a full factorial experiment focused on CAS testing on Lake Ontario water showed that coagulant dose is the most significant contributor to CSMR, turbidity, DOC removal, and THM control. Generally, improvements resulting from CAS addition were of small magnitude (<15%). Reductions in CSMR were attributed to the presence of the sulfate-containing chemicals alum and sulfuric acid in the CAS formulation. Testing of sulfuric acid-activated AAS on Grand River water showed that pairing of AAS with polyaluminum chloride provides better results than with alum with respect to DOC removal (39% and 27% respectively at 60 mg/L coagulant dose). Highest turbidity removals (>90%) with both coagulants were achieved at the tested coagulant and AAS doses of 10 mg/L and 4 mg/L respectively. CSMR reductions in the presence of AAS were also attributable to sulfate contribution from sulfuric acid. Bench-scale simulation of a high-rate sand-ballasted clarification process on Grand River water showed comparable removal efficiencies for turbidity (80 – 90% at 10 mg/L), and DOC (30 – 40% at 50 mg/L). Finally, six different coagulants were tested on the two source waters for potential applicability in CSMR adjustment in the context of lead corrosion. The two chloride-containing coagulants polyaluminum chloride and aluminum chlorohydrate increased CSMR in proportion to the coagulant dose added, as would be expected. Average chloride contribution per 10 mg/L coagulant dose was 2.7 mg/L and 2.0 mg/L for polyaluminum chloride and aluminum chlorohydrate, respectively. Sulfate-contributing coagulants aluminum sulfate, ferric sulfate, pre-hydroxylated aluminum sulfate, and polyaluminum silicate sulfate reduced CSMR as coagulant dose increased, also as would be expected. The highest sulfate contributors per 10 mg/L dose were pre-hydroxylated aluminum sulfate (6.2 mg/L) and ferric sulfate (6.0 mg/L). The lowest CSMR achieved was 0.6 in Lake Ontario water at a 30 mg/L dose and 0.8 in Grand River water at a 60 mg/L dose. Highest DOC removals were achieved with the chloride-containing coagulants in both waters (35 – 50%) with aluminum chlorohydrate showing superiority in that respect. DOC removals with sulfate-containing coagulants were less, generally in the range of 22 – 41%. Specificity of critical CSMR values to source water needs to be investigated. Additionally, long term effects of sustained high or low CSMR values in distribution systems need to be further looked into. Finally, the effect of interventions to alter CSMR on other water quality parameters influencing lead corrosion such as pH and alkalinity still represent a research deficit.