Micro- and nano-fluidic devices represent an exciting field with a wide range of possible applications. These devices, typically made of either silica or glass, ionize when placed in contact with water. Upon the application of an electric field parallel to the wall, a flow is produced by the charged walls called the electro-osmotic flow (EOF). Since electric fields are so often used as the driving force in these devices, EOF is an extremely common phenomenon. For this reason it is highly desirable to be able to control EOF in order to optimize the functioning of these devices. One method which is quite common experimentally is the modification of the surface using polymer coatings. These coatings can be either adsorbed or grafted, and charged or neutral. The first part of this thesis looks at the role of neutral adsorbed polymer coatings for the modulation of EOF. Specifically our simulation results show that for adsorbed coatings made from a dilute polymer solution the strongest quenching of EOF is found for an adsorption strength at the phase transition for adsorption of the polymers. Further evidence is presented that shows that by using a high density of polymer solution and a polymer which has a strong attraction to the surface a very thick polymer layer can be created. Next the case of charged grafted polymer coatings is examined. The variation of the EOF with respect to several key parameters which characterize the polymer coating is investigated and compared to theory. The prediction that the electrophoretic velocity of the polymers is the same as the EOF generated by a coating made up of the same polymers is found to be false though the two values are quite close. The last section presents results which show how hydrodynamic interactions in charged polymer systems can be modeled mesoscopically without the use of explicit charges by forcing a slip between monomers and the surrounding fluid. This model is validated by simulating some surprising predictions made in the literature such as an object with no net charge having a non-zero force when subjected to an electric field, and how the velocity can even be perpendicular to the applied electric field. The thesis can be roughly divided into two topics: using polymer coatings to modulate EOF, and the free solution electrophoresis of polyelectrolytes. While EOF and free solution electrophoresis might seem unrelated it will be shown that the concepts are the same in both cases. In fact while not investigated in this thesis, the mesoscopic simulation methods for electrophoresis could be applied to the modulation of EOF with polymer coatings allowing for the simulation of longer length and time scales or more complex systems such as heterogeneously grafted colloids.

Cononsolvency occurs if a mixture of two good solvents causes the collapse or demixing of polymers into a polymer-rich phase in a certain range of compositions of these two solvents. The better solvent is usually called cosolvent and another common solvent is called solvent. So far, the phase-transition mechanism behind cononsolvency is still rather controversially debated in literature. In this thesis, I experimentally investigated the cononsolvency effect of poly(N-isopropylacrylamide) (PNiPAAm) brushes with different grafting density in aqueous alcohol mixtures. I have used Vis-spectroscopic ellipsometry measurements and proved the hypothesis that the cononsolvency transition of PNiPAAm brushes consists of a volume phase-like equilibrium transition. I found a strong collapse transition in PNiPAAm brushes followed by a reentry behavior as observed by ellipsometry measurements. Using a series of alcohols with increasing alkyl-chain length I have demonstrated that the cononsolvency effect is enhanced and shifted to smaller volume fractions of the alcohol. Particularly for the alcohol with increasing hydrophobic property this is correlated with an increasing tendency of demixing between the cosolvent and water. This is apparently in contrast to the hypothesis of strongly associative solvents being the origin of the cononsolvency effect. The hypothesis of preferential adsorption, on the other hand, can account for this case by assuming an increasing hydrophobically driven adsorption of the cosolvent on the polymer chains. The recently proposed adsorption-attraction model based on the concept of preferential adsorption, can be used to predict the corresponding phase-transition behavior. In particularly the model predictions for variation of the grafting density is in agreement with the experimental findings. However, to reflect the imperfect mixing of the longer alcohols in water as well as finite miscibility of the polymers in the common solvent, extensions of the model have to be considered. I have shown that the simplest extension of the model taking into account the Flory-Huggins parameter for polymer and water can account for the qualitative changes observed for temperature changes in my experiments. Both a theoretical analysis and experimental observations show that the phase-transition mechanism of cononsolvency depends on the relative strengths of various interactions in the polymer solutions. A cononsolvency transition can be driven by a strong cosolvent-solvent attraction or by the preferential adsorption of cosolvent onto the polymer. By an extension of the adsorption-attraction model, I report on a comprehensive and quantitative theoretical study of the cononsolvency effect of neutral polymers such as PNiPAAm brushes, macro-gels and single long chains. The extended adsorption-attraction model is able to describe and predict the phase-transition behaviors of these systems in various aqueous alcohol solutions quantitatively. My analysis showed that besides the dominant role of polymer-cosolvent preferential adsorption and the monomer-cosolvent-monomer triple contacts (cosolvent-assisted temporary cross-linking effect) that define the strength of the collapse-transition in the cosolvent-poor region, other effects are shown to be of relevance: The non-ideal mixing between polymer and solvent plays a role in shifting the collapse transition to the lower-concentration region of cosolvent, and an increase of the demixing tendency between cosolvent and solvent on the polymer chains reduces the window width of the cononsolvency transition. Using data from my own experiments and literature I can show that the cononsolvency response of brushes, gels and single long polymer chain can be consistently described with the same model. The model parameters are consistent with their microscopic interpretation. In addition, weakening of the cononsolvency transition in cosolvent-poor aqueous solutions at high hydrostatic pressure can be explained by the suppression of demixing tendency between cosolvent and water, and between polymer and water in the case of PNiPAAm. An investigation of the grafting-density effect in the cononsolvency transition of grafted PNiPAAm polymer, showed that a decrease of grafting density at the collapse state as well as the temperature is fixed, the swollen polymer chains can show various morphologies not limited to collapse brush. In addition, my experimental results clearly showed that the strongest collapse state can be only realized by polymer brushes with moderate grafting densities. My results display the universal character of the cononsolvency effect with respect to series of cosolvents and show that PNiPAAm brushes display a well-defined and sharp collapse transition. This is most pronounced for 1-propanol as cosolvent which is still fully miscible in water. Potential applications are switches built from implementation of brushes in pores and similar concave geometries can be realized by harnessing the cononsolvency effect of stimuli-responsive polymers such as PNiPAAm. As an example of application of cononsolvency effect of grafted polymers, different molecular-weight PNiPAAm polymers are grafted around the rim of solid-state nanopores by using grafting-to method. I demonstrate that small amounts of ethanol admixed to an aqueous solution can trigger the translocation of fluorescence DNA through polymer-decorated nanopores. I can identify the cononsolvency effect as being responsible for this observation which causes an abrupt collapse of the brush by increasing the alcohol content of the aqueous solution followed by a reswelling at higher alcohol concentration. For the first time, I provide a quantitative method to estimate hydrodynamic thickness of a polymer layer which is grafted around the rim of nanopores. Regardless of the grafting density of a grafted PNiPAAm polymer layer around the rim of nanopores, in the alcohol-tris buffer mixtures, the polymer layer displays solvent-composition responsive behaviors in the range of metabolic pH values and room temperatures. Although in this study PNiPAAm was chosen as a model synthetic polymer, I believe in that the conclusions made for PNiPAAm can be also in general extended to other synthetic polymers as well as to biopolymers such as proteins. As a proof of concept of using synthetic polymers to mimic biological functions of cell-membrane channels, my study clearly transpired that cononsolvency effect of polymers can be used as a trigger to change the size of nanopores in analogy to the opening and closure of the gates of cell-membrane channels.:Chapter 1 Background and motivation 4 1.1 Liquid-liquid phase separation 4 1.2 Polymer phase separation in a pure solvent 5 1.3 Polymer phase separation in mixtures of two good solvents 10 1.4 Characterizing cononsolvency transition in experimental study 14 1.5 Research motivation 16 Chapter 2 Phase behaviors of PNiPAAm brushes in alcohol/water mixtures: A combined experimental and theoretical study 17 2.1 Introduction 17 2.2 Materials and Methods 17 2.2.1 Materials 17 2.2.2 Preparation of Polymer Brushes 18 2.2.3 VIS-Spectroscopic Ellipsometry Measurement 18 2.2.4 Determining a polymer brush’s overlap grafting density 19 2.2.5 Test of PNiPAAm solubility in short-chain polyols 20 2.3 The adsorption-attraction model 20 2.4 Equilibrium behavior of cononsolvency transition of PNiPAAm brushes 22 2.5 Role of volume of solvent molecules in the swelling of PNiPAAm brushes 24 2.6 Cononsolvency transition of PNiPAAm brushes in aqueous solutions of a series of alcohol 24 2.7 Isomer effect of alcohol in the cononsolvency transition of PNiPAAm brushes 27 2.8 Role of alcohol-water interaction in the cononsolvency transition of PNiPAAm polymers 28 2.9 Temperature effect in the cononsolvency transition of PNiPAAm brushes 30 2.10 Grafting-density effect in the cononsolvency transition of PNiPAAm brushes 33 2.11 Octopus-shape-micelle morphology of grafted PNiPAAm polymers 34 2.12 Chapter summary 35 2.13 Chapter appendix 37 2.13.1 Data extraction and reprocessing for the molar Gibbs free energy of mixing 37 2.13.2 Temperature effect in the cononsolvency transition of PNiPAAm gels 37 Chapter 3 The extended adsorption-attraction model 41 3.1 Introduction 41 3.2 An extension of the adsorption-attraction model 43 3.3 Numerical solution of the extended adsorption-attraction model 47 3.4 Validation of the extended adsorption-attraction model 50 3.4.1 Cononsolvency transition of polymer brushes and macro-gels in different alcohol-water mixtures 51 3.4.2 An analysis of the enthalpic interaction between cosolvent and solvent 57 3.4.3 The window width of the cononsolvency transition 60 3.4.4 Pressure effect in the cononsolvency transition of PNiPAAm polymers 61 3.4.5 Cononsolvency transition of a single long polymer 65 3.5 Chapter summary 66 3.6 Chapter appendix 67 3.6.1 Chemical potential change of mixing two components 67 3.6.2 The Enthalpic Wilson model 68 3.6.3 Estimation of effective Flory-interaction parameter 73 3.6.4 Crosslink-density effect in the cononsolvency transition of poly(N-isopropylacrylamide) micro-gel and macro-gel 74 3.6.5 Pressure effect on the dimensionless chemical potential change (μ) 75 3.6.6 Pressure effect on the cosolvent-solvent interaction (χcs) 76 3.6.7 Pressure effect on the polymer-solvent interaction (χps) 77 3.6.8 Chemical potential change of DMSO/water mixtures 78 Chapter 4 Gating the translocation of DNA through poly(N-isopropylacrylamide) decorated nanopores using the cononsolvency effect in aqueous environments 80 4.1 Introduction 80 4.2 Methods 80 4.2.1 Preparation of polymer-grafted gold membrane 80 4.2.2 Translocation experiments of fluorescence λ-DNA through nanopores 82 4.2.3 Method of identification and counting of DNA translocation events 84 4.3 Results and discussion 86 4.3.1 Grafting density effect on the swollen behaviors of PNiPAAm polymers around the rim of nanopores 86 4.3.2 Switching effect of polymer chains around the rim of nanopores in the tri-buffer/ethanol mixtures 88 4.3.3 Switching effect of polymer brushes on the flat surface in the tri-buffer/ethanol mixtures 92 4.3.4 An attempt of numerical fit of experimental data using the extended adsorption-attraction model 94 4.4 Chapter summary 95 4.5 Chapter appendix 96 4.5.1 An estimation of grafting density 96 4.5.2 The method of processing data 97 Chapter 5 Concluding remarks and outlooks 100 5.1 Concluding remarks 100 5.2 Outlooks: A preliminary discussion of the cononsolvency transition of polymer solutions 102 References and notes 108 List of figures 119 List of tables 128 Acknowledgements 130 List of publications 131 Erklärung 132

Title: The study on interactions of functional surfaces with biological systems Author: Ivana Víšová Department: Institute of Physics of the Czech Academy of Sciences, Department of optical and biophysical systems. Supervisor: RNDr. Hana Vaisocherová-Lísalová, Ph.D., Institute of Physics of the Czech Academy of Sciences, Department of optical and biophysical systems. Abstract: This work is devoted to the study of processes influencing the performance of functional antifouling polymer brush coatings and their interactions with complex biological media. Specifically, both results of the fundamental and applied research on the i) functionalization processes influencing coating resistance, ii) tailoring of the physico-chemical properties of the antifouling coatings to minimize the nonspecific interactions with complex biological samples, and iii) behavior and performance of the polymer brush coatings in varying environments are presented. Acrylamide and methacrylamide-based polymer brushes with side hydroxyl, carboxybetaine, and sulfobetaine groups were studied, showing the great potential of their optimized copolymer structures as tunable antifouling functionalizable platforms for cell research or biosensor applications. Moreover, newly developed procedures for antifouling properties recovery after EDC/NHC...

Stimuli-responsive polymers have aroused enormous interest in fundamental and applied polymer research in the last decades as they exhibit a spontaneous, defined, and reversible adaptation of their physicochemical properties towards environmental conditions. Their switching behavior can be triggered by external physical, chemical or biological stimuli, such as a change in temperature, pH value or the presence of certain enzymes. These materials, often referred to as 'smart' polymers, offer a huge potential for novel (bio-medical) sensors, actuators like artificial muscles and flexible robotics, drug-delivery systems, tissue engineering, and switchable catalysts. For almost all of these applications, responsive polymer chains need to be attached to interfaces such as particles or flat substrates or assembled into constrained architectures, like branched structures, micelles, or cross-linked networks. Although there are strong indications that the assembly of responsive polymers largely impacts their adaptiveness, the underlying structure–property relationships are still poorly understood. Besides the challenge of synthesizing constrained polymeric architectures precisely, the analytical characterization of their responsiveness is challenging too. Despite these obstacles, fundamental scientific characterization is an important tool for making smart polymers accessible for real-life applications. To contribute to this, the overarching objective of this work is to synthesize, characterize, adapt, and control the switching characteristics of a multi-responsive polymeric coating. The responsive polyelectrolyte, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), is covalently anchored to flat silicon substrates or gold nanoparticles via three newly developed, distinct grafting-to approaches in a controlled manner. In particular, the thermo-responsive behavior of the nanometer-thick polymer layer in aqueous solutions is being investigated using complementary in-situ techniques such as spectroscopic ellipsometry, attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR spectroscopy) and atomic force microscopy (AFM). Herein, the polymer coating reveals an extraordinary responsiveness, exhibiting two distinct modes of thermo-responses, namely a lower critical solution temperature (LCST) and a multivalent ion induced upper critical solution temperature (UCST). The temperature-dependent switching characteristics of the coating, in terms of switching amplitude, temperature, and sharpness, can be tailored by secondary triggers, such as a change in the pH value, ionic strength, or type of counterions present. In addition to characterizing the interactions between the polymer layer and the aqueous environment on a molecular level, the remarkable impact of thermo-responsiveness on the surface patterning of the coating is exposed. A nanostructured surface of pinned PDMAEMA micelles of tunable size during the UCST transition is opposing a homogenous surface detected both below and above the LCST. Furthermore, the synthetic control over the grafting density of the polymer chains reveals the ambiguous influence of steric constraint on both the LCST and induced UCST transition of the coating for the first time. In summary, the in-depth physicochemical characterization of a multi-responsive polymer coating in this work marks a comprehensive contribution to fundamental advances in constrained responsive polymers and their future applications in tailoring surface properties. / Stimuli-responsive Polymere haben in den letzten Jahrzehnten ein enormes Interesse in der Grundlagen- und angewandten Polymerforschung geweckt, da sie eine spontane, definierte und reversible Anpassung ihrer physikalisch-chemischen Eigenschaften an Umweltbedingungen aufweisen. Ihr Schaltverhalten kann dabei sowohl durch externe physikalische, chemische oder biologische Reize wie zum Beispiel eine Änderung der Temperatur, des pH-Wertes bzw. der Präsenz bestimmter Enzyme, ausgelöst werden. Diese oft als 'intelligente' Polymere bezeichneten Materialien bieten ein großes Potenzial für neuartige (biomedizinische) Sensoren, Aktoren wie künstliche Muskeln und flexible Roboter, Systeme zur Abgabe von Medikamenten, Gewebezüchtung sowie schaltbare Katalysatoren. Für fast alle diese Anwendungen müssen responsive Polymerketten an Grenzflächen wie (Nano-)Partikel oder flache Substrate gebunden bzw. zu sterisch anspruchsvollen Architekturen wie verzweigten Strukturen, polymeren Mizellen oder Netzwerken zusammengefügt werden. Obwohl es deutliche Hinweise darauf gibt, dass die Assemblierung von responsiven Polymeren deren Adaptivität signifikant beeinflusst, sind die zugrunde liegenden Struktur-Eigenschafts-Beziehungen noch wenig bekannt. Neben den hohen Anforderungen der Synthese sterisch eingeschränkter Polymerarchitekturen, ist auch die analytische Charakterisierung ihrer Responsivität anspruchsvoll. Trotz dieser Herausforderungen ist gerade diese grundlegende wissenschaftliche Charakterisierung ein wichtiges Instrument, um intelligente Polymere für reale Anwendungen zugänglich zu machen. Um einen Beitrag dafür zu leisten, ist das übergeordnete Ziel dieser Arbeit die Synthese, Charakterisierung, Anpassung und Regulierung der Schalteigenschaften einer multi-responsiven Polymerbeschichtung. Der responsive Polyelektrolyt, Poly(N,N-dimethylaminoethylmethacrylat) (PDMAEMA), wird über drei neu entwickelte, unterschiedliche Pfropfansätze kontrolliert auf flachen Siliziumsubstraten oder Goldnanopartikeln kovalent verankert. Insbesondere das thermo-responsive Verhalten dieser nur wenigen nanometerdicken Beschichtung wird in wässrigen Lösungen mit komplementären in-situ Techniken wie der spektroskopischen Ellipsometrie, ATR-FTIR (attenuated total reflection Fourier-transform infrared) Spektroskopie sowie AFM (atomic force microscopy) analytisch untersucht. Hierbei zeigt die entwickelte Polymerbeschichtung eine außergewöhnliche Adaptivität bestehend aus zwei unterschiedlichen Arten der Thermoresponsivität, namentlich einer unteren kritischen Entmischungstemperatur (lower critical solution temperature, LCST) und einer durch multivalente Ionen induzierten oberen kritischen Entmischungstemperatur (upper critical solution temperture, UCST). Die Schalteigenschaften der Beschichtung in Bezug auf Schaltamplitude, -temperatur, und Schärfe des Übergangs können durch sekundäre Stimuli, wie eine Änderung des pH-Werts, der Ionenstärke oder der Art der vorhandenen Gegenionen, maßgeschneidert werden. Neben der Charakterisierung der molekularen Wechselwirkungen zwischen Polymerschicht und wässriger Umgebung, wird auch der bemerkenswerte Einfluss der Thermoresponsivität auf die Oberflächenstrukturierung der Beschichtung gezeigt. Eine Nanostrukturierung aus gepinnten PDMAEMA-Mizellen mit einstellbarer Größe während des UCST-Übergangs steht einer homogenen Oberfläche gegenüber, die sowohl unterhalb als auch oberhalb der LCST festgestellt wird. Darüber hinaus zeigt die synthetische Kontrolle der Pfropfdichte der Polymerketten erstmals den ambivalenten Einfluss sterischer Restriktionen sowohl auf den LCST als auch auf den induzierten UCST-Übergang der Beschichtung. Zusammenfassend leistet die tiefgründige physiko-chemische Charakterisierung einer multi-responsiven Polymerbeschichtung in dieser Arbeit einen umfangreichen Beitrag zum grundlegenden Verständnis gepfropfter, responsiver Polymere und ihren künftigen Anwendungen bei der gezielten Anpassung von Oberflächeneigenschaften.

Polymer coatings on periodic nanostructures have facilitated advanced applications in various fields. The performance of these structures is intimately linked to their nanoscale characteristics. Smart polymer coatings responsive to environmental stimuli such as temperature, pH level, and ionic strength have found important uses in these applications. Therefore, to optimize their performance and improve their design, precise characterization techniques are essential for understanding the nanoscale properties of polymer coating, especially in response to stimuli and interactions with the surrounding medium. Due to their layered compositions, applying non-destructive measurement methods by X-ray/neutron scattering is optimal. These approaches offer unique insights into the structure, dynamics, and kinetics of polymeric coatings and interfaces. The caveat is that scattering methods require non-trivial data modeling, particularly in the case of periodic structures, which result in strong correlations between scattered beams. The dynamical theory (DT) model offers an exact model for interpreting off-specular signals from periodically structured surfaces and has been validated on substrates measured by neutron scattering. In this dissertation, we improved the model using a computational optimization approach that simultaneously fits specular and off-specular scattering signals and efficiently retrieves the three-dimensional sample profile with high precision. In addition, we extended this to the case of X-ray scattering. We applied this approach to characterize polymer brushes for nanofluidic applications and protein binding to modulated lipid membranes. This approach opens new possibilities in developing soft matter nanostructured substrates with desired properties for various applications. / Doctor of Philosophy / Polymer coatings on nanopatterned surfaces have recently facilitated advanced applications in various fields, particularly biotechnology. For example, multichannel surfaces coated with polymer can serve as nanofluidic devices for precise control of fluid flow in drug screening and detection of specific biomolecules. Moreover, polymer-coated nanopatterned surfaces, which possess similar properties to the extracellular matrix, provide excellent substrates for biological studies. The performance of these systems is closely tied to their nanoscale features, such as the thickness and conformation of the polymer layers. Therefore, high-resolution non-invasive nanoscale characterization techniques are essential for investigating these coatings to optimize their performance and enhance their design. X-ray/neutron scattering offers a non-destructive measurement method with unique capabilities in the nanoscale characterization of polymer coatings. However, scattering methods require non-trivial data modeling, particularly in the case of layered coatings on patterned surfaces. To tackle this challenge, we improved a dynamical theory (DT) model that allows for precise modeling of neutron and X-ray scattering signals from such systems. Using a computational optimization approach, the model enables efficient retrieval of the three-dimensional sample profile with high accuracy. We applied this approach to characterize polymer brushes for nanofluidic applications and protein binding to modulated lipid membranes. This methodology opens up new avenues for developing customizable, nanostructured substrates made from soft materials that possess tailored properties for a wide range of uses.

The scope of this work is to fathom different possibilities to create functional coatings with polymer brushes. The immobilization of nanoparticles and enzymes is investigated, as well as the affection of their properties by the stimuli-responsiveness of the brushes. Another aspect is the coating of 3D-nanostructures by polymer brushes and the investigation of the resulting functional properties of the hybrid material. The polymer brush coatings are characterized by a variety of microscopic and spectroscopic techniques, with a special emphasis on the establishment of the combinatorial quartz crystal microbalance/spectroscopic ellipsometry technique as a tool to characterize the functional properties of the polymer brush systems insitu. The pH-responsive swelling of the polyelectrolyte brushes poly(acrylic acid) and poly(2-vinylpyridine), as well as the thermoresponsive swelling of poly(N-isopropylacryl amide) is studied in detail by this technique. Poly(2-vinylpyridine) and binary poly(N-isopropylacryl amide)-poly (2-vinylpyridine) brushes are used as templates for the insitu-synthesis of palladium and platinum nanoparticles with catalytic activity. As an example for the use of polymer brushes to immobilize enzymes, the model enzyme glucose oxidase is physically adsorbed to poly (2-vinylpyridine) and poly (acrylic acid) brushes and also covalently bound to poly (acrylic acid) brushes. In the last part of this thesis, sculptured thin films are coated with poly (acrylic acid) and poly (N-isopropylacryl amide) brushes and the swelling characteristics as well as the adsorption behavior of the model protein bovine serum albumin are investigated.

Im Rahmen dieser Arbeit wurden für die Herstellung neuartiger funktioneller Oberflächenbeschichtungen Polymerbürstensysteme basierend auf linearen, thermoresponsiven Poly-2-oxazolinen (POX) entwickelt und ausführlich charakterisiert. Als Grundbaustein für die Herstellung von POX-Bürsten wurden drei endfunktionalisierte thermoresponsive POX mittels kationisch ringöffnender Polymerisation synthetisiert, wobei jeweils 2-Cyclopropyl-2-oxazolin (cPrOX) als thermoresponsive Wiederholungseinheit und 2-Methyl-2-oxazolin (MeOX) als hydrophiles Comonomer zu verschiedenen Anteilen verwendet wurden. Mittels VIS-spektroskopischen Trübungsmessungen wurde für alle POX in Wasser ein LCST-Entmischungsverhalten mit einem reversiblen und scharfen Phasenübergang nachgewiesen, wobei die Trübungstemperaturen stark von der Polymerhydrophilie sowie der Molmasse und der Polymerkonzentration in Lösung abhingen. Die Herstellung der POX-Polymerbürsten auf der Basis der synthetisierten POX erfolgte über einen „grafting to“-Ansatz, bei welchem die Polymere in einem thermisch initiierten Prozess über ein funktionalisiertes Kettenende kovalent an ein Substrat angebunden wurden. Als Hauptmethode zur Charakterisierung der physikochemischen Eigenschaften der hergestellten Schichten, insbesondere deren temperaturabhängiges Schaltverhalten in Wasser, wurde spektroskopische Ellipsometrie verwendet. Zusätzlich kamen Rasterkraftmikroskopie, Kontaktwinkel und Quarzkristallmikrowaage mit Dissipationsaufzeichnung zum Einsatz. Im Gegensatz zum sehr scharfen, diskontinuierlichen Phasenübergang der POX in Lösung konnte für alle POX-Bürsten ein kontinuierlicher Übergang von einem gestreckten Bürstenzustand bei niedrigen Temperaturen in einen kollabierten Zustand bei hohen Temperaturen bestimmt werden, wobei das Quellvermögen und die temperaturabhängigen Quellkurvenverläufe durch die Polymereigenschaften und die Bürstenparameter beeinflussbar waren. Durch die Kombination eines POX mit Polyacrylsäure (PAA) als zweite Komponente konnten zudem neuartige binäre Polymerbürstensysteme hergestellt werden, welche ein komplexes pH- und temperaturabhängiges Schaltverhalten sowie ein steuerbares Proteinadsorptionsvermögen in Abhängigkeit von der Bürstenpräparationsmethodik, der POX-PAA-Zusammensetzung sowie der Temperatur und dem pH-Wert der umgebenden Pufferlösung aufwiesen. Zur ausführlichen Charakterisierung der Schichteigenschaften wurde neben den bereits benannten Methoden der spektroskopischen Ellipsometrie, Rasterkraftmikroskopie und der Kontaktwinkelmessung auch Röntgenphotoelektronenspektroskopie genutzt. Abschließende Zelladhäsionsexperimente mit humanen mesenchymalen Stammzellen auf den bürstenmodifizierte Oberflächen unter physiologischen Bedingungen offenbarten deutliche Unterschiede in der Affinität der Zellen zur Adhäsion auf POX-Homopolymerbürsten in Abhängigkeit der Bürstenhydrophilie. Darüber hinaus konnte die Zelladhäsion auch auf POX-PAA-Mischbürstensystemen gesteuert werden.

The performance and life time of organic solar cells are critically dependent on the properties of active layer materials and device interfaces. In this manuscript, we developed new organic-inorganic hybrid materials to create intimate contact between donor and acceptor phases and facilitate the interfacial electronic charge transfer through the device. First, the synthesis of versatile triethoxysilane-terminated poly(3-hexylthiophene) P3HT for direct anchoring (grafting-onto) in one step procedure to various metallic oxides was reported. Electro-optical analysis showed an efficient charge transfer from the polymer to nanoparticles; suggesting that these materials are suitable candidates for photovoltaic application. In the second part, we demonstrate for the first time the elaboration of low band gap polymer brushes on metallic oxide surfaces via surface initiated step growth polymerization (grafting-through). In both cases, a higher grafting density, better packing of polymer chains and enhanced optical properties were observed due to the grafting methodology and polymer characteristics. Finally, P3HT brushes were elaborated on indium tin oxide surface (ITO) as hole transporting layer of organic solar cells. Photovoltaic performances showed that P3HT self-assembled monolayer (SAMs) could be promising alternatives to PEDOT:PSS. / Les performances et la durée de vie des cellules solaires organiques sont fortement dépendantes de la qualité des matériaux de la couche active et des interfaces dans le dispositif. Dans ce manuscrit, nous avons développé des nouveaux matériaux hybrides organiques-inorganiques pour favoriser le contact entre les matériaux donneur/accepteur d’électrons et ainsi faciliter le transfert de charges à travers le dispositif. Tout d'abord, la synthèse de poly(3-hexylthiophène) P3HT fonctionnalisé par le triéthoxysilane a permis le greffage direct (« grafting-onto ») sur des oxydes métalliques. L’analyse des propriétés électro-optiques montre un transfert de charge efficace du polymère aux nanoparticules; ce qui suggère que ces matériaux sont des candidats potentiels pour l'application photovoltaïque. Dans la deuxième partie, nous avons montré pour la première fois, l’élaboration de brosses de polymères dits à faible bande interdite sur des surfaces d’oxydes métalliques par la technique « grafting-through ». Une densité de greffage élevée, un meilleur empilement des chaines de polymères et des propriétés optiques améliorées ont été obtenus grâce à la technique de greffage et aux caractéristiques du polymère greffé. Enfin, des brosses de P3HT ont été élaborées sur la surface d’oxyde d'indium et d’étain (ITO) en tant que couche de transport de trous de cellules solaires organiques. Les performances photovoltaïques ont montré que les monocouches auto-assemblées de P3HT (SAM) peuvent être une alternative au PEDOT: PSS.

Ce travail est consacré à l'étude d'origine et signatures de la dépendance en concentration $\phi$ du paramètre de Flory $\chi _(eff)$ pour les polymères neutres solubles dans l'eau. Les trois versions du modèle à deux états qui ont été proposés pour expliquer le comportement de phase de Poly(oxyéthylène) dans l'eau mènent à $\chi _(eff)(\phi) $. Cette dépendance peut servir à tester la qualité des modèles: elle permet de distinguer entre les différents modèles et juger de la pertinence des paramètres impliqués. L'apparition de $\chi _(eff)(\phi)$ à partir des modèles alternatifs à un seul état est aussi discutée. Les signatures macroscopiques de $\chi _(eff)(\phi)$ sont illustrées avec l'exemple du gonflement des chaînes isolées et des brosses planes. La dépendance de $\chi _(eff)$ avec $\phi$ dans les systèmes à concentration uniforme a deux conséquences principales: entraînement du déplacement du croisement entre les régimes Gaussien et auto-évitant, et la possibilité d'une transition de phase du premier ordre pour les chaînes flexibles isolées. $\chi _(eff)(\phi)$ peut provoquer une séparation verticale de phase dans des brosses polymères qui implique la coexistence de deux phases de concentration finie. Cette approche est appliquée à l'interprétation d'un ensemble des résultats expérimentaux qui suggère que cet effet pourrait exister avec les brosses de Poly(N-isopropylacrylamide).

Im Rahmen dieser Arbeit wurden neuartige, temperatursensitive Polymerbürsten mit terminaler Click-Funktionalität hergestellt, die nicht nur im Detail untersucht bzw. charakterisiert wurden, sondern deren Eigenschaften zusätzlich durch die polymeranaloge Umsetzung mit einem entsprechend modifizierten Fluoreszenzfarbstoff, Polymer oder mit superparamagnetischen Nanopartikeln erweitert werden konnten. Mittels kontrolliert radikalischer Polymerisation wurde mono- und bi-funktionalisiertes Poly(N-isopropylacrylamid) mit unterschiedlichen Endgruppen und Molekulargewichten synthetisiert und über das "grafting to"-Verfahren an eine Modeloberfläche angebunden. Die kovalente Anbindung der entsprechenden Komponenten erfolgte entweder durch die Kupfer-katalysierte oder thermisch induzierte Alkin-Azid-Cycloaddition. Neben den physiko-chemischen Eigenschaften wurde im Besonderen das temperaturabhängige Schaltverhalten dieser funktionellen Polymerbürsten in situ untersucht, wobei neben der spektroskopischen Ellipsometrie als Hauptmethode, zusätzlich Rasterkraftmikroskopie, UV/VIS- und Fluoreszenzspektroskopie, sowie Elektronenmikroskopie verwendet wurden. Im Fall der Farbstoff-modifizierten Polymerbürsten zeigte sich, dass nicht nur die Eigenschaften des Farbstoffs durch das Polymer beeinflussbar sind, sondern auch das Quellverhalten der Polymerbürsten durch den Farbstoff. Die mit Nanopartikeln modifizierten Polymerbürsten zeigten eine homogene Verteilung der Partikel auf der Oberfläche, sowie eine veränderte Schaltcharakteristik, die durch das Auftreten eine dynamischen Wechselwirkungszone zwischen den Polymerbürsten und den Nanopartikeln erklärt werden kann. Mit Hilfe der thermisch induzierten Azid-Alkin-Cycloaddition konnten erstmalig definierte Kettenverlängerungen an Polymerbürsten durchgeführt und gleichzeitig der Nachteil der limitierten Pfropfungsdichte der „grafting to“-Methode überwunden werden. Darüber hinaus konnte der temperaturinduzierte Schalteffekt nicht nur erhalten bleiben, sondern in Bezug auf die Schaltamplitude auch signifikant vergrößert werden und ergab ein sensitiveres, verbessertes Polymerbürstensystem.