This study is primarily concerned with the adsorption characteristics of ethyl(hydroxyethyl)cellulose (EHEC), a water soluble polymer with many pharmaceutical appliations. / Thesis (PhD in AppSc)--University of South Australia, 2001.

This study is primarily concerned with the adsorption characteristics of ethyl(hydroxyethyl)cellulose (EHEC), a water soluble polymer with many pharmaceutical appliations.

In this work a finite element model is proposed to describe the swelling of poly(acrylic acid) hydrogels under the influence of an external electric field. The specific application of this model is for optical applications, but the design could be used equally well for other applications such as sensors and actuators.The model is proposed as five individual modules, which work in conjunction with each other but which can also function independently. This independence allows the model to provide intermediate results to the user, and also permits each module to be improved or adjusted individually without affecting the operation of the overall model. The first module is the Electrical module, which calculates the external electric field present in the hydrogel by solving Laplace's equation. The second module is the Chemical module, which uses the electric field to calculate the diffusion and migration of ions through the hydrogel/solvent regions. The third module is the Force module, which uses the change in ion concentrations to calculate the resulting change in osmotic pressure (force). This force is then used in the Mechanical module to calculate the deformation of the hydrogel, based on the assumption of linear elasticity. Finally, the fifth module is the Optical module, which uses the deformation to calculate the theoretical change in focal length.To verify the operation of the model, numerous experiments were conducted with the deformation of a poly(acrylic acid) hydrogel being measured under various external voltages with different electrode configurations. Overall, the model agrees quite well with the experimental results, but also highlights some interesting discrepancies that will need to be considered in future work. There is also some scope for improvement in the experimental method used, but again this is left for future work.

Thesis (Ph. D.)--University of Texas at Austin, 2008. / Vita. Includes bibliographical references.

Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2002. / Includes bibliographical references. Also available in electronic version. Access restricted to campus users.

Thesis (Ph. D.)--University of Texas at Austin, 2000. / Vita. Includes bibliographical references (leaves 150-159). Available also in a digital version from Dissertation Abstracts.

This dissertation studies physical properties and technological applications of engineered heterogenous polymer gels. Such gels are synthesized based on modulation of gel chemical nature in space. The shape memory gels have been developed in this study by using the modulated gel technology. At room temperature, they form a straight line. As the temperature is increased, they spontaneously bend or curl into a predetermined shape such as a letter of the alphabet, a numerical number, a spiral, a square, or a fish. The shape changes are reversible. The heterogenous structures have been also obtained on the gel surface. The central idea is to cover a dehydrated gel surface with a patterned mask, then to sputter-deposit a gold film onto it. After removing the mask, a gold pattern is left on the gel surface. Periodical surface array can serve as gratings to diffract light. The grating constant can be continuously changed by the external environmental stimuli such as temperature and electric field. Several applications of gels with periodic surface arrays as sensors for measuring gel swelling ratio, internal strain under an uniaxial stress, and shear modulus have been demonstrated. The porous NIPA gels have been synthesized by suspension technique. Microstructures of newly synthesized gels are characterized by both SEM and capillary test and are related to their swelling and mechanical properties. The heterogenous porous NIPA gel shrink about 35,000 times faster than its counterpart--the homogeneous NIPA gel. Development of such fast responsive gels can result in sensors and devices applications. A new gel system with built-in anisotropy is studied. This gel system consists of interpenetrated polymer network (IPN) gels of polyacrylamide (PAAM) and N-isopropylacrylamide (NIPA). The swelling property of the anisotropy IPN gels along the pre-stressing direction is different from that along other directions, in contrast to conventional gels which swell isotropically. It is found that the ratio (L/D) of length (L) and diameter (D) of IPN samples has step-wise changes as the samples are heated from below the volume phase transition temperature to the above. A theoretical model is proposed and is in good agreement with the experimental results.

Thesis (MSc)--Stellenbosch University, 2003. / ENGLISH ABSTRACT: In this thesis the formation and properties of a polymer gel on and at a surface are investigated. The gel under investigation is defined as a three-dimensional network of macromolecules that form permanent links with one another and also with confining planar surfaces. The precise location of the crosslinks on the wall or on another macromolecule is not known prior to linking, and will differ from sample to sample. However, once the crosslinks are formed, they are assumed to be permanent. This random linking is the source of the disorder in the system, over which a quenched average has to be taken. An existing model [9] of network formation, with polymer-polymer crosslinks, is extended to incorporate a surface and polymersurface crosslinks. Within the framework of replica theory, statistical averages and physical properties of the system are calculated by means of a variational approach. Macroscopic information, in terms of the free energy of deformation, is obtained by using two different potentials to simulate the erosslinks mathematically. / AFRIKAANSE OPSOMMING: In hierdie tesis word die vorming en eienskappe van 'n polimeergel, wat teen 'n oppervlak gevorm word, ondersoek. Die gel word gedefinieer as 'n drie-dimensionele netwerk van makromolekules wat permanente bindings met mekaar, maar ook met twee inperkende, platvlakke, vorm. Die presiese ligging van die bindings op die muur en op ander makromolekules is nie vooraf bekend nie, en sal verskil van een gel-monster tot die volgende. Sodra die konneksies egter gevorm is, word aanvaar dat hulle permanent is. Die lukrake bindingsproses is die oorsprong van wanorde in die sisteem, waaroor 'n wanorde-gemiddelde bereken moet word. 'n Bestaande model [9]van netwerkvorming, met polimeer-polimeer bindings, word uitgebrei om 'n oppervlakte en polimeer-oppervlak bindings in te sluit. Statistiese fisika gemiddeldes en fisiese eienskappe van die sisteem word binne die raamwerk van replika-teorie en 'n variasie benadering bereken. Makroskopiese inligting, in terme van die vrye energie van vervorming, word verkry deur twee verskillende potensiale te gebruik om die konneksies wiskundig voor te stel.

Polymer hydrogel films change their properties in response to environmental change. This remarkable phenomenon results in many potential applications of polymer hydrogel films. In this thesis colored thermo-sensitive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel film was prepared by firstly synthesizing polymer latex and secondarily crosslinking the nanoparticles and casting the polymers onto glass. The shape-memory effect has been observed when changing the environmental temperature. The temperature-dependent of turbidity of polymer hydrogel film was measured by HP UVVisible spectrophotometer. This intelligent hydrogel might be used in chemomechanical systems and separation devices as well as sensors. Polymer adsorption plays an important role in many products and processes. In this thesis, surfactant-free three-dimensional polystyrene (PS) nanoparticle network has been prepared. The infrared spectroscopy and solubility experiment are performed to prove the crosslinking mechanism, also the BET method was used to measure the adsorption and desorption of polystyrene network. The BET constant (C) is calculated (C=6.32). The chemically bonded polymer nanoparticle network might have potential applications as catalyst or used for chromatographic columns.

The thermally responsive hydroxypropyl cellulose (HPC) hydrogel nanoparticles have been synthesized and characterized. The HPC particles were obtained by chemically crosslinking collapsed HPC polymer chains in water-surfactant (dodecyltrimethylammonium bromide) dispersion above the lower critical solution temperature (LCST) of the HPC. The size distributions of microgel particles, measured by dynamic light scattering, have been correlated with synthesis conditions including surfactant concentration, polymer concentration, and reaction temperature. The swelling and phase transition properties of resultant HPC microgels have been analyzed using both static and dynamic light scattering techniques. By first making gel nanoparticles and then covalently bonding them together, we have engineered a new class of gels with two levels of structural hierarchy: the primary network is crosslinked polymer chains in each individual particle, while the secondary network is a system of crosslinked nanoparticles. The covalent bonding contributes to the structural stability of the nanostructured gels, while self-assembly provides them with crystal structures that diffract light, resulting in colors. By using N-isopropylacrylamide copolymer hydrogel nanoparticles, we have synthesized nanoparticle networks that display a striking iridescence like precious opal but are soft and flexible like gelatin. This is in contrast to previous colored hydrogels, which were created either by adding dyes or fluorescent, or by organic solvent or by embedding a colloidal crystal array of polymer solid spheres . Creating such periodic 3D structures in materials allows us to obtain useful functionality not only from the constituent building blocks but also from the long-range ordering that characterizes these structures. Hydroxypropyl cellulose (HPC) and poly (acrylic acid ) (PAA) complexes were studied using turbidity measurement and laser light scattering. The phase transition temperature of the complexes is found to depend on pH and molecular weights of PAA and HPC. The driving force for this phenomenon is due to the hydrogen bonding and hydrophobic interaction of the macromolecules. Based on the principle of the PAA/HPC complexes, the PAA nanoparticles were synthesized in 0.1wt % HPC aqueous solution at room temperature.