Spelling suggestions: "subject:"poorly watersoluble drugs"" "subject:"poorly waterrsoluble drugs""
1 |
Nanoparticle engineering for enhanced drug deliveryBosselmann, Stephanie 20 November 2012 (has links)
Low water solubility of drug compounds limits their dissolution in the aqueous body fluids. When formulated using conventional methods, those poorly water-soluble drugs often results in low and erratic bioavailability. The use of nanoparticle engineering technologies for the formulation of poorly water-soluble drugs is a valuable strategy to enhance dissolution rates and thus bioavailability.
In Chapter 2, a nanoparticle engineering process, Evaporative Precipitation into Aqueous Solution (EPAS), was modified to provide improved control over the size of precipitated particles. The improved process, Advanced EPAS, was employed to prepare nanoparticles of the poorly water-soluble drug itraconazole (ITZ). The influence of processing parameters and formulation aspects on the size of suspended ITZ-particles was investigated. The process was shown to be robust such that the size distribution of dispersed nanoparticles was largely independent across the different parameters.
In Chapter 3, aqueous nanoparticulate dispersions of the poorly soluble drug mefenamic acid (MFA) were developed and subsequently incorporated into controlled release formulations employing spray-drying. Release of MFA from spray-dried formulations was sustained and complete demonstrating the feasibility of using nanoparticulates for the preparation of controlled release systems.
In Chapter 4, the nanoparticle engineering process, Rapid Freezing (RF), was utilized to produce nanostructured, amorphous aggregates of the poorly water soluble drug ketoprofen (RF-KET). The stability of RF-KET against recrystallization was improved through the deposition of a hydrophobic plasma-polymerized film. The coating presented an effective barrier against surface mobility and moisture uptake resulting in enhanced stability of RF-KET for up to six months at accelerated storage conditions as compared to three days for uncoated RF-KET. / text
|
2 |
A Hydrocortisone Nanoparticle Dosage Form.Zghebi, Salwa S., de Matas, Marcel, Denyer, Morgan C.T., Blagden, Nicholas 03 September 2011 (has links)
No / Of particular importance in recent years has been the development
of techniques for producing nanoparticles (NPs) of
poorly-water soluble drugs with dimensions less than 1000 nm
for which their high surface area can lead to improvements
in bioavailability. Furthermore, the small size of these particles
can also enable cellular uptake, particularly for positively charged systems. Therefore, an overall objective of this part
of the project was to produce nanoparticles with different
levels of positive surface charge using the bottom-up method.
|
3 |
STUDIES ON DRUG SOLUBILIZATION MECHANISM IN SIMPLE MICELLE SYSTEMSFeng, Shaoxin 01 January 2009 (has links)
Poor aqueous solubilities of drug candidates limit the biopharmaceutical usefulness in either oral or parenteral dosage forms. Lipid assemblies, such as micelles, may provide a means of enhancing solubility. Despite their usefulness, little is known about the means by which micelles accomplish this result. The goal of the current dissertation is to provide the molecular level understanding of the mechanism by which simple micelle systems solubilize drugs. Specifically, the location, orientation and amount of the drug molecules in micelle systems are the focuses of the work.
Three series of model drugs, steroids, benzodiazepines and parabens, in three surfactant systems with anionic, cationic and neutral hydrophilic headgroups were studied. Solubilization power of each micelle system for each model drug was determined by equilibrium solubility. The observed strong surface activities of model drug at hydrocarbon/water interface and the ability of the drugs to compete with surfactants for the model oil/water interface lend support to the hypothesis that drug molecules are mainly solubilized in the interfacial region of the micelles. A surface-localized thermodynamic model that considered the surfactant-drug competition at micelle surface was successfully applied to predict the micelle/water partitioning coefficients. The predictions were made without the use of adjustable parameters in the case of both dilute and concentrated solutions. The orientation of drug at micelle surface was determined by matching calculated occupied areas by solutes at oil/water interface using molecular modeling method to the experimental values. To look into the micro-structure of micelles, twodimensional and diffusion (or PGSE) NMR techniques were employed to detect the specific drug-surfactant interactions and the micelle sizes influenced by model drugs and electrolytes.
|
4 |
UNDERSTANDING THE THERMODYNAMICS AND ORAL ABSORPTION POTENTIAL OF PHARMACEUTICAL AMORPHOUS SOLID DISPERSIONSSetiawan, Nico 01 January 2018 (has links)
Supersaturating drug delivery systems, such as amorphous solid dispersions (ASDs), have been used extensively to elevate the apparent solubility and oral bioavailability of poorly water-soluble drugs. However, despite the numerous examples of success in increasing solubility and oral bioavailability using ASDs, physical stability challenges remain as formulators seek to employ high drug loading for cost reduction and improved patient compliance. Therefore, stability in both the solid and solution state must be considered for ASDs to be successful. In the solid state, the drug must remain amorphous in the solid matrix throughout the shelf life of the product. Although excipients, such as polymers, have been known to stabilize the amorphous drug in the solid state, stresses encountered during manufacturing and fluctuations in storage conditions may have a detrimental impact on the physical stability of ASDs. Numerous studies have been performed on the impact of each process on ASD stability, yet the relative quantitative impact of each process with respect to the overall energetics landscape is not well understood.
Further, ASDs must dissolve after administration and maintain the intended supersaturation in the gastrointestinal (GI) tract during the GI transit time to achieve maximum oral absorption. In solution, the energetics advantage of the amorphous over the crystalline material is a “double-edged sword,” in that it produces not only a high absorption driving force but also an undesirable high crystallization potential. An approach to quantitatively measure the thermodynamic activity of amorphous materials is, thus, desirable. However, it is difficult to measure thermodynamic activity quantitatively, especially due to the speciation process induced by formulation excipients and endogenous materials. Hence, it is often difficult to assess the true enhancement in the absorption for a given ASD and to measure its crystallization tendency in solution. Overall, this dissertation aims to address the following:
1. The relative thermodynamics magnitude of various processes with respect to the crystallization energy associated with amorphous drugs
2. The development of a practical tool to measure the thermodynamic activity of amorphous materials over its crystalline counterpart in solution to assess the enhancement in absorption in the presence of excipients
3. The impact of measured thermodynamic activity on drug crystallization energetics in the presence of excipients
|
5 |
DEVELOPMENT AND CHARACTERIZATION OF POLYMER-OIL NANOSTRUCTURED CARRIER (PONC) FOR CONTROLLED DELIVERY OF ALL-TRANS RETINOIC ACID (ATRA)Narvekar, Mayuri January 2014 (has links)
The commonly used PLGA-based delivery systems are often limited by their inadequate drug loading and release properties. This study reports the integration of oil into PLGA to form the prototype of a hybrid drug carrier PONC. Our primary goal is to confer the key strength of lipid-based drug carriers, i.e. efficient encapsulation of lipophilic compounds, to a PLGA system without taking away its various useful qualities. The PONC were formulated by emulsification solvent evaporation technique, which were then characterized for particle size, encapsulation efficiency, drug release and anticancer efficacy. The ATRA loaded PONC showed excellent encapsulation efficiency and release kinetics. Even after surface functionalization with PEG , controlled drug release kinetics was maintained, with 88.5% of the encapsulated ATRA released from the PEG-PONC in a uniform manner over 120 hours. It also showed favorable physicochemical properties and serum stability. PEG-PONC has demonstrated substantially superior activity over the free ATRA in ovarian cancer cells that are non-responsive to the standard chemotherapy. The newly developed PEG-PONC significantly reduced the IC50 values (p<0.05) in the chemoresistant cells in both MTT and colony formation assays. Hence, this new ATRA-nanoformulation may offer promising means for the delivery of lipophilic compounds like all-trans retinoic acid to treat highly resistant ovarian cancer. / Pharmaceutical Sciences
|
6 |
Nanosizing of hydrocortisone using microfluidic reactors.Ali, H.R.H., York, Peter, Blagden, Nicholas January 2008 (has links)
No / The formulation of poorly water-soluble drugs is a challenging
problem within pharmaceutical development. Recently, formulation using
nanoparticles was highlighted as showing great potential to improve the dissolution
and solubility characteristics of poorly water soluble drugs.
|
7 |
Establishing quality profiles for 3D printed tablets loaded with different poorly water-soluble substances.Matossian, Lilit January 2024 (has links)
Introduction: Integrating 3-dimensional (3D) printing with lipid-based formulation (LBF) is impacting pediatric pharmaceutical manufacturing by enabling personalized oral dosage forms tailored to children's specific needs. Serious challenges are created by manipulating conventional adult dosages to produce suitable dosages for the pediatric population. The study explores an emulsion gel with two model lipophilic drugs, Aprepitant and Irbesartan, using semi-solid extrusion (SSE) as a 3D printing method to produce patient-centered dosages. Method: The solubility of the two model drugs in the studied LBF type IIIA – MC was determined using the shake-flask method combined with High-Performance Liquid Chromatography with Ultraviolet Detection (HPLC-UV) analysis. Once determined, LBF was loaded with 90% of the soluble drug amount to later produce the emulsion by mixing the drug-loaded LBF with Milli-Q water. The emulsion gel was produced as the next step by adding three different polymers to the emulsion. The three polymers were Methylcellulose Methocel (A4C), Methylcellulose Methocel (A4M), and Sodium Crosscarmellose (AcDiSol). Lastly, tablets were 3D-printed using a BIO X 3D printer with a pneumatic printhead. The tablets were vacuum-dried and analyzed for mass and content uniformity, and disintegration time. Results: The thermodynamic solubility of Aprepitant in LBF IIIA – MC was determined to be 11.30 mg/g while the solubility of Irbesartan was 4.08 mg/g. The produced tablets contained lower concentrations of the drugs compared to the traditional dosages available on the market. The 3D-printed tablets passed the European Pharmacopeia requirements for mass and content uniformity, and disintegration time. Conclusion: The study showed justified results indicating the emulsion gel can be used to produce tablets loaded with different poorly water-soluble drugs. All characterization studies done on the 3D-printed tablets carried out according to the European Pharmacopeia guidelines showed correct mass and content uniformity together with reasonable disintegration time. This suggests that the emulsion gel has the potential to be used to produce tablets loaded with any other lipophilic drug, potentially multiple drugs loaded at the same time.
|
8 |
Improvement in the bioavailability of poorly water-soluble drugs via pulmonary delivery of nanoparticlesYang, Wei 23 October 2009 (has links)
High throughput screening techniques that are routinely used in modern drug
discovery processes result in a higher prevalence of poorly water-soluble drugs. Such
drugs often have poor bioavailability issues due to their poor dissolution and/or
permeability to achieve sufficient and consistent systemic exposure, resulting in sub-optimal
therapeutic efficacies, particularly via oral administration. Alternative
formulations and delivery routes are demanded to improve their bioavailability.
Nanoparticulate formulations of poorly water-soluble drugs offer improved dissolution
profiles. The physiology of the lung makes it an ideal target for non-invasive local and
systemic drug delivery for poorly water-soluble drugs.
In Chapter 2, a particle engineering process ultra-rapid freezing (URF) was
utilized to produce nanostructured aggregates of itraconazole (ITZ), a BCS class II drug, for pulmonary delivery with approved biocompatible excipients. The obtained
formulation, ITZ:mannitol:lecithin (1:0.5:0.2, w/w), i.e. URF-ITZ, was a solid solution
with high surface area and ability to achieve high magnitude of supersaturation. An
aqueous colloidal dispersion of URF-ITZ was suitable for nebulization, which
demonstrated optimal aerodynamic properties for deep lung delivery and high lung and
systemic ITZ levels when inhaled by mice.
The significantly improved systemic bioavailability of inhaled URF-ITZ was
mainly ascribed to the amorphous morphology that raised the drug solubility. The effect
of supersaturation of amorphous URF-ITZ relative to nanocrystalline ITZ on
bioavailability following inhalation was evaluated in Chapter 3. The nanoparticulate
amorphous ITZ composition resulted in a significantly higher systemic bioavailability
than for the nanocrystalline ITZ composition, as a result of the higher supersaturation that
increased the permeation.
In Chapter 4, pharmacokinetics of inhaled nebulized aerosols of solubilized ITZ
in solution versus nanoparticulate URF-ITZ colloidal dispersion were investigated, under
the hypothesis that solubilized ITZ can be absorbed faster through mucosal membrane
than the nanoparticulate ITZ. Despite similar ITZ lung deposition, the inhaled solubilized
ITZ demonstrated significantly faster systemic absorption across lung epithelium relative
to nanoparticulate ITZ in mice, due in part to the elimination of the phase-to-phase transition of nanoparticulate ITZ. / text
|
9 |
Effect of lipid-based formulation on the solubilization patterns if poorly water-soluble drugs.Gude, Manjiri January 2021 (has links)
Poorly water-soluble drugs (PWSDs), to date, require advanced formulation techniques to improve solubility and achieve the required plasma concentration to show a therapeutic effect when orally administered. Lipid-based formulations (LBFs) are an enabling strategy that is being used to improve the oral delivery of PWSDs. The aim of this study was to investigate the effect of lipid-based formulation, Type IIIA-LC, on the solubilization patterns of PWSDs, namely, carvedilol and felodipine. Solubility studies, for both drugs, were performed with LBF dispersed in -1) dog intestinal fluid (DIF), and 2) water, to identify and compare the extent of solubility in different matrices, and in silico to identify interesting patterns with any correlations in experimental and computational data. Solubility studies showed that carvedilol had better solubility in LBF when compared to felodipine. Computational studies showed that both drugs solubilized in the colloid in both digested and undigested states. Effect of drug loading had no significant difference on the solubilization patterns of both drugs. The maximum drug loading done was for 100 molecules though there is the possibility of the colloid having a higher capacity. Digestion did not seem to have a significant effect on the distribution of both drugs. In vitro and in silico data were in qualitative agreement and therefore, this computational model can be further used to study the specific processes causing solubilization, improvement, and development of new LBFs.
|
10 |
Investigation of drug ionic liquid salts for topical delivery systemsBansiwal, Mukesh January 2017 (has links)
Pharmaceutical companies and FDA (Federal Drug Administration) rules rely heavily on crystalline active pharmaceutical ingredients delivered as tablets and powders in the form of neutral compounds, salts and solvates of neutral compounds and salts. About half of all drugs sold in the market are in the form of salts which are held together by ionic bonds along with some other forces. Recently, Ionic liquids (ILs) an interesting class of chemical compounds have offered potential opportunity for exploration as novel drug ionic liquid salts, particularly in the field of transdermal/topical drug delivery. Due to the multifunctional nature of these salts they could allow generation of new pathway to manipulate the transport and deposition behaviour of the drug molecule. It is this modular approach of IL that forms the basis of the research presented here, in which pharmaceutically acceptable compounds are combined with selected drugs with known problems.
IL salts were generated by combining at least one drug molecule with FDA approved compounds and were assessed for physicochemical properties, skin deposition and permeation studies. Skin deposition data suggested that these systems exhibit high skin retention, which was found to correlate with the molecular weight. On the other hand, permeation data displayed an inverse relationship between flux values and molecular weight of the permeant. Similar work was extended with ILs with mixed anions containing two drugs. The benzalkonium-sulfacetamide ILs were investigated for synergism and the biological studies data display no synergistic effect. It was also illustrated that in-situ IL based ibuprofen hydrogels systems could be manipulated via IL approach for topical application. These findings suggest the potential applicability of IL based formulations for topical delivery of drugs.
|
Page generated in 0.0636 seconds