Spelling suggestions: "subject:"postmortem"" "subject:"postmortem""
81 |
Can cross sectional imaging contribute to the investigation of unexplained child deaths? A literature reviewBeck, Jamie J.W. January 2014 (has links)
This review examines the factors that can influence an investigation into the unexpected death of a child before considering if using imaging techniques could be of benefit.
Method
A systematic search strategy was adopted to search databases using keywords, these results were then subjected to inclusion and exclusion criteria to filter and refine the evidence base further.
Discussion
More research is published on the use of MRI in comparison with other modalities. There is evidence in the case of MRI in particular that its use could be of benefit in identifying and ruling out potential causes of death in children.
Conclusion
More research is needed on the use of CT but the routine use of MRI in child death investigation could now be considered. Ethical considerations appear to be a barrier to research in this area and discussions as to how such considerations can be overcome is necessary.
|
82 |
The prevention of deaths in police cellsMakgopa, Lazarus 06 1900 (has links)
The research question of this study is to determine what circumstances and conditions
contribute to deaths in police cells. The study was undertaken in order to establish the causes of
deaths in police cells and the factors which contribute thereto, as well as to determine the best
international practices to prevent deaths in police cells. The literature was reviewed in order to
establish the extent to which this phenomenon has been researched in South Africa and in other
countries and to determine the regulatory framework related thereto. The researcher had
collected data from the dockets relating to deaths in police cells which were kept at the IPID
provincial offices in Gauteng and Limpopo. The data were collected by using the docket
analysis schedule and were categorised into themes during the analysis process. Four cause of
deaths in police cells were identified, namely, suicide, natural causes, assault by fellow
detainees and injuries which were sustained prior to detention. Suicide is the leading cause of
deaths. The second leading causes of deaths in police cells are natural causes and assault by
fellow detainees. Deaths as a result of injuries sustained prior to detention came third. The most
common ligatures which were used to commit suicide are shoe-laces, belts and strips torn from
clothing and bedding items. The preferred ligature points are the burglar proof bars on cell
windows. Booted feet and hands were the most common instruments used to inflict fatal injuries
on the detainees. It was also found that police officials are generally not complying fully with the
standing orders which regulate the management of people who are detained in police cells. The
failure of police officials to comply fully with the standing orders on custody in police cells
contributed to the deaths of detainees in police cells. Recommendations are made to prevent
the deaths of detainees in police cells. / Police Practice / M. Tech. (Policing)
|
83 |
An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and CloggingMemarpour, Arashk January 2011 (has links)
The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. Therefore, the SEN can be considered as a vital factor for a stable casting process and the steel quality. In addition, the steelmaking processes occur at high temperatures around 1873 K, so the interaction between the refractory materials of the SEN and molten steel is unavoidable. Therefore, the knowledge of the SEN behaviors during preheating and casting processes is necessary for the design of the steelmaking processes The internal surfaces of modern SENs are coated with a glass/silicon powder layer to prevent the SEN graphite oxidation during preheating. The effects of the interaction between the coating layer and the SEN base refractory materials on clogging were studied. A large number of accretion samples formed inside alumina-graphite clogged SENs were examined using FEG-SEM-EDS and Feature analysis. The internal coated SENs were used for continuous casting of stainless steel grades alloyed with Rare Earth Metals (REM). The post-mortem study results clearly revealed the formation of a multi-layer accretion. A harmful effect of the SENs decarburization on the accretion thickness was also indicated. In addition, the results indicated a penetration of the formed alkaline-rich glaze into the alumina-graphite base refractory. More specifically, the alkaline-rich glaze reacts with graphite to form a carbon monoxide gas. Thereafter, dissociation of CO at the interface between SEN and molten metal takes place. This leads to reoxidation of dissolved alloying elements such as REM (Rare Earth Metal). This reoxidation forms the “In Situ” REM oxides at the interface between the SEN and the REM alloyed molten steel. Also, the interaction of the penetrated glaze with alumina in the SEN base refractory materials leads to the formation of a high-viscous alumina-rich glaze during the SEN preheating process. This, in turn, creates a very uneven surface at the SEN internal surface. Furthermore, these uneven areas react with dissolved REM in molten steel to form REM aluminates, REM silicates and REM alumina-silicates. The formation of the large “in-situ” REM oxides and the reaction of the REM alloying elements with the previously mentioned SEN´s uneven areas may provide a large REM-rich surface in contact with the primary inclusions in molten steel. This may facilitate the attraction and agglomeration of the primary REM oxide inclusions on the SEN internal surface and thereafter the clogging. The study revealed the disadvantages of the glass/silicon powder coating applications and the SEN decarburization. The decarburization behaviors of Al2O3-C, ZrO2-C and MgO-C refractory materials from a commercial Submerged Entry Nozzle (SEN), were also investigated for different gas atmospheres consisting of CO2, O2 and Ar. The gas ratio values were kept the same as it is in a propane combustion flue gas at different Air-Fuel-Ratio (AFR) values for both Air-Fuel and Oxygen-Fuel combustion systems. Laboratory experiments were carried out under nonisothermal conditions followed by isothermal heating. The decarburization ratio (α) values of all three refractory types were determined by measuring the real time weight losses of the samples. The results showed the higher decarburization ratio (α) values increasing for MgO-C refractory when changing the Air-Fuel combustion to Oxygen-Fuel combustion at the same AFR value. It substantiates the SEN preheating advantage at higher temperatures for shorter holding times compared to heating at lower temperatures during longer holding times for Al2O3-C samples. Diffusion models were proposed for estimation of the decarburization rate of an Al2O3-C refractory in the SEN. Two different methods were studied to prevent the SEN decarburization during preheating: The effect of an ZrSi2 antioxidant and the coexistence of an antioxidant additive and a (4B2O3 ·BaO) glass powder on carbon oxidation for non-isothermal and isothermal heating conditions in a controlled atmosphere. The coexistence of 8 wt% ZrSi2 and 15 wt% (4B2O3 ·BaO) glass powder of the total alumina-graphite refractory base materials, presented the most effective resistance to carbon oxidation. The 121% volume expansion due to the Zircon formation during heating and filling up the open pores by a (4B2O3 ·BaO) glaze during the green body sintering led to an excellent carbon oxidation resistance. The effects of the plasma spray-PVD coating of the Yttria Stabilized Zirconia (YSZ) powder on the carbon oxidation of the Al2O3-C coated samples were investigated. Trials were performed at non-isothermal heating conditions in a controlled atmosphere. Also, the applied temperature profile for the laboratory trials were defined based on the industrial preheating trials. The controlled atmospheres consisted of CO2, O2 and Ar. The thicknesses of the decarburized layers were measured and examined using light optic microscopy, FEG-SEM and EDS. A 250-290 μm YSZ coating is suggested to be an appropriate coating, as it provides both an even surface as well as prevention of the decarburization even during heating in air. In addition, the interactions between the YSZ coated alumina-graphite refractory base materials in contact with a cerium alloyed molten stainless steel were surveyed. The YSZ coating provided a total prevention of the alumina reduction by cerium. Therefore, the prevention of the first clogging product formed on the surface of the SEN refractory base materials. Therefore, the YSZ plasma-PVD coating can be recommended for coating of the hot surface of the commercial SENs. / <p>QC 20111014</p>
|
84 |
Posmrtná cesta v době Válčících států a Han na základě písemných a archeologických pramenů / Journey to the otherworld in the Warring States and Han periods as reflected in written and archaeological sourcesSolanič, Dmitrij January 2019 (has links)
1 Abstract The purpose of this work is to evaluate the post-mortem journey of the soul theory in the Warring States and early Han dynasty periods. Since this theory is presented by it's propoents as an alternative to the so-called "happy-home" theory, before starting his own analysis the author first introduces both theories citing the main arguments of their proponents. Author's own analysis consists of two parts: interpretation of archeological sources consisting of four tombs and translations of passages from textual sources connected to burial ritual dating to said period. Throughout the work, the author views all sources from the standpoint of both theories and evaluates their applicability of said theories to those sources. Through his own analysis, the author reaches the conclusion that neither the theory of post-portem journey, not the "happy-home" theory prove suitable when it comes to explaining the presence burial articles in tombs of said period and their theses do not seem to be reflected in the period's literature. The author considers the role that the deceased played in their society to be a better key to explaining burial articles than either of the theories concerning what the ancient people thought followed after death. Keywords: journey, post-mortem journey, "happy home", afterlife,...
|
85 |
Processo criativo, planejamento de produto e design de jogos no diário de desenvolvimento de “Lux Ex”, um jogo digital independente. /Chagas, Caio José Ribeiro January 2018 (has links)
Orientador: Antônio Francisco Magnoni / Resumo: A presente pesquisa tem como objetivo principal gerar um registro e uma análise do processo criativo da versão alpha do jogo digital independente (indie game) Lux Ex, que foi produzido quase que inteiramente por um único desenvolvedor, de forma autoral e adotando o modelo de produção independente conhecido como “Lone Wolf Developer” (Desenvolvedor Lobo Solitário). Tal modelo de produção possui particularidades que podem agregar ao produto final um caráter mais autoral, porque todas as suas etapas de realização são marcadas por um processo criativo pouco linear e entrelaçado com uma produção altamente interdisciplinar. Assim, o jogo apresenta uma complexa rede de significados para expressar conceitos e ideias emergentes da subjetividade de seu criador, valendo-se de sistemas simbólicos já estabelecidos. O objeto de análise da dissertação que aqui apresentamos, é o processo criativo completo de um jogo digital independente. / Abstract: The present research has as main objective to generate a registry and an analysis of the creative process of the alpha version of the indie game Lux Ex, that was produced almost entirely by a single developer, in an authorial way and adopting the model of production independently known as the "Lone Wolf Developer". Such a model of production has particularities that can add to the final product a more authorial character, because all its stages of realization are marked by a creative process not linear and intertwined with a highly interdisciplinary production. Thus, the game presents a complex network of meanings to express concepts and ideas emerging from the subjectivity of its creator, drawing on already established symbolic systems. The object of analysis of the dissertation presented here is the complete creative process of an independent digital game / Mestre
|
86 |
An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and CloggingMemarpour, Arashk January 2011 (has links)
The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. Therefore, the SEN can be considered as a vital factor for a stable casting process and the steel quality. In addition, the steelmaking processes occur at high temperatures around 1873 K, so the interaction between the refractory materials of the SEN and molten steel is unavoidable. Therefore, the knowledge of the SEN behaviors during preheating and casting processes is necessary for the design of the steelmaking processes The internal surfaces of modern SENs are coated with a glass/silicon powder layer to prevent the SEN graphite oxidation during preheating. The effects of the interaction between the coating layer and the SEN base refractory materials on clogging were studied. A large number of accretion samples formed inside alumina-graphite clogged SENs were examined using FEG-SEM-EDS and Feature analysis. The internal coated SENs were used for continuous casting of stainless steel grades alloyed with Rare Earth Metals (REM). The post-mortem study results clearly revealed the formation of a multi-layer accretion. A harmful effect of the SENs decarburization on the accretion thickness was also indicated. In addition, the results indicated a penetration of the formed alkaline-rich glaze into the alumina-graphite base refractory. More specifically, the alkaline-rich glaze reacts with graphite to form a carbon monoxide gas. Thereafter, dissociation of CO at the interface between SEN and molten metal takes place. This leads to reoxidation of dissolved alloying elements such as REM (Rare Earth Metal). This reoxidation forms the “In Situ” REM oxides at the interface between the SEN and the REM alloyed molten steel. Also, the interaction of the penetrated glaze with alumina in the SEN base refractory materials leads to the formation of a high-viscous alumina-rich glaze during the SEN preheating process. This, in turn, creates a very uneven surface at the SEN internal surface. Furthermore, these uneven areas react with dissolved REM in molten steel to form REM aluminates, REM silicates and REM alumina-silicates. The formation of the large “in-situ” REM oxides and the reaction of the REM alloying elements with the previously mentioned SEN´s uneven areas may provide a large REM-rich surface in contact with the primary inclusions in molten steel. This may facilitate the attraction and agglomeration of the primary REM oxide inclusions on the SEN internal surface and thereafter the clogging. The study revealed the disadvantages of the glass/silicon powder coating applications and the SEN decarburization. The decarburization behaviors of Al2O3-C, ZrO2-C and MgO-C refractory materials from a commercial Submerged Entry Nozzle (SEN), were also investigated for different gas atmospheres consisting of CO2, O2 and Ar. The gas ratio values were kept the same as it is in a propane combustion flue gas at different Air-Fuel-Ratio (AFR) values for both Air-Fuel and Oxygen-Fuel combustion systems. Laboratory experiments were carried out under nonisothermal conditions followed by isothermal heating. The decarburization ratio (α) values of all three refractory types were determined by measuring the real time weight losses of the samples. The results showed the higher decarburization ratio (α) values increasing for MgO-C refractory when changing the Air-Fuel combustion to Oxygen-Fuel combustion at the same AFR value. It substantiates the SEN preheating advantage at higher temperatures for shorter holding times compared to heating at lower temperatures during longer holding times for Al2O3-C samples. Diffusion models were proposed for estimation of the decarburization rate of an Al2O3-C refractory in the SEN. Two different methods were studied to prevent the SEN decarburization during preheating: The effect of an ZrSi2 antioxidant and the coexistence of an antioxidant additive and a (4B2O3 ·BaO) glass powder on carbon oxidation for non-isothermal and isothermal heating conditions in a controlled atmosphere. The coexistence of 8 wt% ZrSi2 and 15 wt% (4B2O3 ·BaO) glass powder of the total alumina-graphite refractory base materials, presented the most effective resistance to carbon oxidation. The 121% volume expansion due to the Zircon formation during heating and filling up the open pores by a (4B2O3 ·BaO) glaze during the green body sintering led to an excellent carbon oxidation resistance. The effects of the plasma spray-PVD coating of the Yttria Stabilized Zirconia (YSZ) powder on the carbon oxidation of the Al2O3-C coated samples were investigated. Trials were performed at non-isothermal heating conditions in a controlled atmosphere. Also, the applied temperature profile for the laboratory trials were defined based on the industrial preheating trials. The controlled atmospheres consisted of CO2, O2 and Ar. The thicknesses of the decarburized layers were measured and examined using light optic microscopy, FEG-SEM and EDS. A 250-290 μm YSZ coating is suggested to be an appropriate coating, as it provides both an even surface as well as prevention of the decarburization even during heating in air. In addition, the interactions between the YSZ coated alumina-graphite refractory base materials in contact with a cerium alloyed molten stainless steel were surveyed. The YSZ coating provided a total prevention of the alumina reduction by cerium. Therefore, the prevention of the first clogging product formed on the surface of the SEN refractory base materials. Therefore, the YSZ plasma-PVD coating can be recommended for coating of the hot surface of the commercial SENs.
|
87 |
Insect olfaction as an information filter for chemo-analytical applicationsPaczkowski, Sebastian 29 May 2013 (has links)
Die Geruchswahrnehmung von Insekten ist an die spezifischen Anforderungen der Ökosysteme angepasst, in denen sie leben. Von Insekten wahrgenommene Volatile können Informationen über den Ort eines geeigneten Ovipositionsplatzes oder den physiologischen Zustand einer Wirtspflanze geben. Da der Geruchssinn der Insekten sich seit Millionen von Jahren an die Wahrnehmung bestimmter Volatile angepasst hat, können die wahrgenommenen Volatile als Markerstoffe angesehen werden, die zuverlässig einen Ökosystemzustand angeben können. Die Identifikation dieser Markerzustände und die Evaluation ihrer Nützlichkeit für spurenanalytische Anwendungen ist das Ziel dieser Arbeit.
Es wurden drei Themen ausgewählt um die Verwendungsmöglichkeit des Insektengeruchssinns für Sensoranwendungen zu überprüfen: Fleischfrische, Todeszeitbestimmung (post mortem Intervall, PMI) und frühzeitige Feuererkennung. Spurenanalytik (GC-MS), Elektrophysiologie (EAG, GC-MS/EAD), Verhaltensversuche und Feldtests wurden angewandt, um die chemoökologische Interaktion der Schmeißfliege Calliphora vicina und der „Feuerkäfer“ Melanophila cuspidata, Merimna atrata and Acanthocnemus nigricans mit ihrer natürlichen Umgebung zu untersuchen. Die Resultate aus diesen Methoden erlaubten die Selektion von Volatilen, die drei Kriteria erfüllen: hohe Quantität, zuverlässige Emission und die ausschliessliche Emission von der untersuchten und keiner anderen Quelle. Diese drei Auswahlkriterien wurden aufgestellt um zu gewährleisten, dass die ausgewählten Markervolatile nicht nur zuverlässig mit dem physiologischen Status der Substrate (Alter von verderbendem Fleisch, PMI, Temperatur von erhitzten Spänen) korrelieren, sondern auch den Ansprüchen technischen Sensorsysteme genügen.
Im Falle des alternden Fleisches unter warmen und trockenen Bedingungen ist Nonanal ein Zeiger für die korrekte Reifung des Fleisches zu Schinken. Dimethyl Trisulfid, Phenol und Indol zeigen das Verderben des Fleisches unter warmen und feuchten Bedingungen an. Bei niedrigen Temperaturen sind zunehmende 2,3 Butandiol Emission und abnehmende Nonanal Emission ein Zeiger für zunehmendes Verderben des Fleisches, sowohl unter trockenen als auch feuchten Bedingungen. Allerdings wurde 2,3 Butandiol nicht von C. vicina wahrgenommen, da die Fliege während der Vegetationszeit aktiv ist und unter diesen Bedingungen Dimethyl Trisulfid, Phenol und Indol emittiert werden.
Nonanal, Hexanal, Dimethyl Disulfid, Dimethyl Trisulfid, Butan-1-ol und Phenol wurden als nützliche Volatile zur Eingrenzung der Leichenliegezeit ausgewählt. Die genannten Aldehyde sind typisch für die frühen Stadien der Verwesung, gefolgt von Butan-1-ol und den Schwefelsulfiden. Phenol wird hauptsächlich in den späteren Verwesungsstadien emittiert. Allerdings werden Phenol und 1-Butanol nicht von der Fliege wahrgenommen, da diese ein Generalist ist und nicht zwischen dem geblähten und aktivem Stadium der Verwesung unterscheiden muss. Daher wird zusätzlich die Geruchswahrnehmung des Speckkäfers Dermestes maculans betrachtet. Die Untersuchung anderer necrophager Insekten können weitere Einblicke in die Zeitabhängigkeit der Volatilemissionen während der Vertebratenverwesung geben. Die im Rahmen dieser Arbeit gewonnenen Ergebnisse erlauben eine Korrelation zwischen Emissionen und Leichenliegezeit und können eine Grundlage für eine volatilenbasierte post mortem Zeitbestimmung für Polizeikräfte sein.
Terpene, aliphatische Aldehyde, Furfural und Methoxyphenole werden von erhitztem Holz emittiert. Komponenten aus all diesen Stoffklassen werden von M. cuspidata und M. atrata wahrgenommen, da diese Käfer den Erhitzungszustand von Baumstämmen nach einem Feuer erkennen können, um einen geeigneten Ovipositionsplatz zu finden. A. nigricans nimmt vor allem Methoxyphenole wahr, wohingegen M. atrata und M. acuminata Furfural zur Orientierung verwenden. Diese Unterschiede komplementieren das bekannte Verhalten dieser Käfer in ihrer natürlichen Umgebung, da A. nigricans auf verkohlten Stämmen, die große Mengen von Methoxyphenolen emittieren, seine Eier ablegt, und M. atrata und M. cuspidata auf Stämmen ihre Eier ablegen, die vom Feuer zwar äußerlich verkohlt, aber innerlich nur erhitzt wurden und daher Furfural emittieren. Halbleitergassensoren, die Furfural mit einer ausreichenden Selektivität vermessen können, können Holzbrände schon während ansteigender Temperatur und damit vor der Entzündung detektieren. Derartige Sensoren können sowohl als neuartige Frühwarnsysteme für die holzverarbeitende Industrie als auch für Waldbrandwarnsysteme oder den Haushalt dienen.
|
88 |
Sudden and unexpected deaths in adults : an investigation of cases reported to Tygerberg Forensic Pathology Services from January 2001 - December 2005Tiemensma, Marianne 12 1900 (has links)
Thesis (MMed (Pathology. Forensic Medicine))--University of Stellenbosch, 2010. / Bibliography / ENGLISH ABSTRACT: Background - The workload of the forensic pathologist and Forensic Pathology Services
staff is increased by the referral of potentially unnecessary natural cases to the Forensic
Pathology Services. The primary aims of the medico-legal autopsy are limited to
establishing a cause of death in presumed unnatural cases, and to exclude criminality or
negligence.
Objective – To determine the final outcomes of forensic post-mortem examinations in
“sudden and unexpected” adult deaths over a 5 year period.
Methods - An observational, retrospective, descriptive study was conducted. ”Sudden
and unexpected” adult deaths referred to Tygerberg Forensic Pathology Services between
1 January 2001 and 31 December 2005 were reviewed. Data was collected from the
autopsy reports, contemporaneous notes and hospital records.
Findings – A total of 816 adult cases of sudden and unexpected death were referred to
Tygerberg Forensic Pathology Services over the 5 year period studied. Complete
autopsies had been performed in 74% (601/816) of cases. The presumed manner of death
was natural in 79 % of cases, and an increase in the number of natural cases autopsied per
year was noted over the 5-year study period. Diseases of the cardiovascular, respiratory
and central nervous systems were responsible for the majority of natural deaths.
Infectious diseases were responsible for most deaths in the youngest age group studied
(18-29 years). Acute alcohol poisoning was responsible for the deaths of 35 (6%) cases,
with an average blood alcohol concentration of 0.38g/100mL in these cases. Eight deaths
were drug-/substance related. Waiting times for blood alcohol and toxicology results
increased over the 5-year study period. No cause of death was found in 10.6% of cases.
Conclusions -The questionnaire and interviewing structure could possibly be improved in
order to obtain better pre-autopsy information and to reduce the number of “unnecessary”
medicolegal autopsies, thereby reducing the burden of cost on the Forensic Pathology
Services. / AFRIKAANSE OPSOMMING: Agtergrond – Die werkslading van die forensiese patoloog en ander personeel van die
Forensiese Patologie Dienste word vermeerder deur die verwysing van moontlik
onnodige natuurlike gevalle na die Forensiese Patologie Dienste. Die primêre doelwitte
van die medies-geregtelike nadoodse ondersoek is beperk tot die bepaling van ‘n oorsaak
van dood in vermoedelik onnatuurlike gevalle, en om nalatigheid of kriminele aksies uit
te skakel.
Doelwit – Om die finale uitkomste van medies-geregtelike nadoodse ondersoeke in
“skielike en onverwagte” volwasse sterftes oor ‘n 5-jaar tydperk te bepaal.
Metodes – ‘n Observasionele, retrospektiewe, beskrywende studie is uitgevoer. “Skielike
en onverwagte” volwasse sterftes wat verwys is na Tygerberg Forensiese Patologie
Dienste vanaf 1 Januarie 2001 tot 31 Desember 2005 is hersien. Inligting is versamel
vanaf die nadoodse ondersoekverslae, kontemporêre notas en hospitaalnotas.
Bevindinge – Agthonderd en sestien volwasse gevalle van skielike en onverwagte sterftes
is oor die 5-jaar periode verwys na Tygerberg Forensiese Patologie Dienste. Volledige
lykskouings is uitgevoer in 74% (601/816) van die gevalle. Die vermoedelike wyse van
die sterfte was natuurlik in 79.04% en ‘n toename in die aantal natuurlike gevalle wat
lykskouings ondergaan het, is waargeneem oor die 5-jaar studie tydperk. Siektes van die
kardiovaskulêre, respiratoriese en sentrale senuweestelsel was verantwoordelik vir die
meerderheid natuurlike sterftes. Infektiewe toestande was verantwoordelik vir die meeste
sterftes in die jongste ouderdomsgroep (18-29 jaar) wat bestudeer is. Akute
alkoholvergiftiging was verantwoordelik vir die sterftes van 35 (6%) gevalle, met ‘n
gemiddelde bloed-alkohol-konsentrasie van 0.38g/100mL in hierdie gevalle. Agt sterftes
was dwelm-/middelverwant. Die wagtyd vir bloed-alkohol en toksikologie resultate het
vermeerder oof die 5-jaar studie tydperk. Die oorsaak van dood was nie gevind in 10.6%
van gevalle.
Afleidings – Die vraelys en onderhoud-struktuur kan moontlik verbeter word om
sodoende beter inligting te verkry voor die uitvoering van ‘n lykskouing, en om die aantal
“onnodige” medies-geregtelike nadoodse ondersoeke te verminder, en sodoende die
kostedruk te verminder op die Forensiese Patologie Dienste.
|
89 |
The prevention of deaths in police cellsMakgopa, Lazarus 06 1900 (has links)
The research question of this study is to determine what circumstances and conditions
contribute to deaths in police cells. The study was undertaken in order to establish the causes of
deaths in police cells and the factors which contribute thereto, as well as to determine the best
international practices to prevent deaths in police cells. The literature was reviewed in order to
establish the extent to which this phenomenon has been researched in South Africa and in other
countries and to determine the regulatory framework related thereto. The researcher had
collected data from the dockets relating to deaths in police cells which were kept at the IPID
provincial offices in Gauteng and Limpopo. The data were collected by using the docket
analysis schedule and were categorised into themes during the analysis process. Four cause of
deaths in police cells were identified, namely, suicide, natural causes, assault by fellow
detainees and injuries which were sustained prior to detention. Suicide is the leading cause of
deaths. The second leading causes of deaths in police cells are natural causes and assault by
fellow detainees. Deaths as a result of injuries sustained prior to detention came third. The most
common ligatures which were used to commit suicide are shoe-laces, belts and strips torn from
clothing and bedding items. The preferred ligature points are the burglar proof bars on cell
windows. Booted feet and hands were the most common instruments used to inflict fatal injuries
on the detainees. It was also found that police officials are generally not complying fully with the
standing orders which regulate the management of people who are detained in police cells. The
failure of police officials to comply fully with the standing orders on custody in police cells
contributed to the deaths of detainees in police cells. Recommendations are made to prevent
the deaths of detainees in police cells. / Police Practice / M. Tech. (Policing)
|
90 |
Untersuchungen zum extramuralen Praktikum zur Schlachttier- und Fleischuntersuchung in der veterinärmedizinischen AusbildungMaurer, Patric 06 September 2016 (has links)
Einleitung
Der amtliche Tierarzt nimmt im europäischen Recht eine Schlüsselposition für den gesundheitlichen Verbraucherschutz und den Tierschutz von Schlachttieren ein. Zu Beginn der amtlichen fleisch-hygienischen Tätigkeit ist eine 200-stündige Pflichtassistenz vorgeschrieben. Gleichwohl wurde vor dem Hintergrund dieser verantwortungsvollen Tätigkeit die Wichtigkeit einer praktischen Ausbildung in der Schlachttier- und Fleischuntersuchung während des Veterinärmedizinstudiums sowohl rechtlich als auch durch verschiedene Organisationen hervorgehoben. In der Studienordnung nimmt das sogenannte „Schlachthofpraktikum“ mit 100 Stunden etwa ein Viertel der lebensmittelhygienischen Ausbildungszeit ein. Obligatorische Ziele dieses Lehrformats sind das Üben der amtlichen Ante- und Post-Mortem-Untersuchung bei den Tierarten Rind und Schwein, sowie das Informieren über die tierschutzgerechte Behandlung der Schlachttiere. In der Fachliteratur finden sich erste modellhafte, gleichwohl keine umfassenden Untersuchungen zum „Schlachthofpraktikum“ in Deutschland.
Ziel der Untersuchung
Daher widmet sich diese Dissertation einer tiefergehenden Untersuchung der praktischen Ausbildung in der Schlachttier- und Fleischuntersuchung. Hierbei sollten die studentischen Lernerfahrungen sowie die Meinungsbilder von Studierenden und amtlichen Tierärzten evaluiert und ausgewählte Situationen am Praktikumsschlachtbetrieb erhoben werden.
Material und Methoden
Im Rahmen einer Querschnittsstudie wurden zwei schriftliche, standardisierte Methoden (Evaluierung gemäß der Deutschen Veterinärmedizinischen Gesellschaft und eigene Erhebung) bei Leipziger Veterinärmedizinstudierenden der Abschlussjahrgänge 2008-2014 angewandt. Die Evaluierung umfasste eine Checkliste sowie je einen Bewertungsbogen für den Studierenden und den amtlichen Tierarzt. Die Erhebung kam aufgrund von Weiterentwicklungen in drei Versionen zur Anwendung.
Ergebnisse
Bei der Evaluierung gaben die 705 Studierenden an, zu 82,1 % (n=579) einen und zu 17,9 % (n=126) mehrere Praktikumsbetriebe besucht zu haben. Dabei wurden einige Betriebe mit zunehmender Häufigkeit benannt. Über 95,7 % (n=675) der Studierenden bestätigten die obligatorischen Praktikums-inhalte (Schlachttieruntersuchung: 95,7 %; n=674 / Fleischuntersuchung: 96,7 %; n=682 / Tierschutz-aspekte: 95,7 %; n=675). Die Fleischuntersuchung im Verdachtsfall markierten etwa drei Viertel der Teilnehmer (Rind: 69,4 %; n=489 / Schwein: 76,7 %; n=541). Viele Studierende gaben darüber hinaus weitere Themen an, wie bspw. Hygiene und Schlachttechnologie. Ein Abschlussgespräch notierten 79,4 % (n=559) der Praktikanten. Das Meinungsbild der Studierenden und amtlichen Tierärzte bzgl. des Praktikums fiel größtenteils positiv aus. 54,7 % (n=242) der amtlichen Tierärzte nahmen zudem an, die Studierenden für eine spätere fleischhygienische Tätigkeit motiviert zu haben; dem gegenüber gaben dies nur 31,1 % (n=138) der Studierenden an. Ausgewählte Situationen am Schlachtbetrieb wurden mithilfe der Erhebungen dokumentiert. Die Durchführung der Schlachttieruntersuchung beim Rind bzw. Schwein wurde in 97,6 % (n=249) resp. 96,1 % (n=269) Erhebungen notiert. Die rechtskonforme Fleischuntersuchung am bovinen bzw. porcinen Magen-Darm-Trakt wurde zu 7,5 % (n=18) resp. 6,7 % (n=17) beschrieben. Die Leberlymphknoten beim Schwein wurden laut 8,2 % (n=30) der Erhebungen vorschriftsgemäß untersucht. In 64,8 % (n=406) der Erhebungen wurden – zumeist mehrere – Tierschutzprobleme angegeben. Als Reaktion auf die Tierschutzprobleme wurden in 86,0 % (n=296) der Erhebungen Typ 2 und Typ 3 amtliche Maßnahmen dokumentiert.
Schlussfolgerungen
Die Konzentrierung der Praktikanten auf ausgewählte Schlachtbetriebe kann auf den bundesweiten Rückgang an geeigneten Praktikumsstätten infolge von Betriebsschließungen und Tierarten-spezialisierungen zurückgeführt werden. Für eine erleichterte Organisation des Praktikums ist daher (i) eine rechtlich fixierte Zutrittsberechtigung für veterinärmedizinische Praktikanten im Schlacht-betrieb und (ii) eine Reduktion der Praktikumsanforderungen von zwei auf eine Pflichttierart wichtig. Trotz dieser organisatorischen Schwierigkeiten hat sich das Praktikum aufgrund der vielfältigen Inhalte als wichtiges Ausbildungsformat bestätigt. Gleichwohl wurde die Vermittlung der obligatorischen Inhalte nicht von allen Teilnehmern angegeben, was eine Nichterfüllung der Studienvorgaben darstellt. Wie die Erhebung zeigte, kann dies durch eine mangelnde oder fehlerhafte Demonstration im Schlachtbetrieb begründet werden. Aus fachlicher und didaktischer Sicht ist der Anteil an Studierenden ohne Angabe der erweiterten Fleischuntersuchung im Verdachtsfall (23-30 %) besonders kritisch zu werten. Zum einen muss der amtliche Tierarzt nach europäischem Recht die erweiterte Fleischuntersuchung selbstständig durchführen, weswegen das praktische Erlernen essentiell wichtig ist. Zum anderen erfolgt diese Untersuchung am Ausschleusband, wodurch der ökonomische Druck auf die Tierärzte entfällt und ausreichend Übungszeit ohne Störung des Routinebetriebs gegeben ist. Die häufig dokumentierten Tierschutzprobleme können den Studierenden die Wichtigkeit der amtlichen Überwachung und der eigenen Tätigkeit während des Praktikums verdeutlichen. Abschließend zeigen die Untersuchungsergebnisse die Notwendigkeit einer verstärkten Kommunikation zwischen den Ausbildenden der Hochschulen und der zuständigen Behörden für eine optimale Nutzung des Lehrformates „Schlachthofpraktikum“. / Introduction
Within the European law, the official veterinarian plays a key role in protecting public health and animal welfare. Before starting to work as a veterinarian in the area of meat hygiene, a 200-hour mandatory training has to be completed. Nevertheless, the importance of a practical training in ante- and post-mortem inspection during veterinary studies was highlighted both by law and by different organisations. The German Federal Licensure Act for Veterinarians requires a so-called "abattoir internship" of 100 hours which represents a quarter of the complete food hygienic time quota. Mandatory contents are training the ante- and post-mortem inspection of cattle and pigs, as well as informing about the treatment of slaughter animals. In the literature, there are exemplary, however, no comprehensive studies on the "abattoir internship" in Germany.
Aim of the study
This thesis investigates the extramural practical training of ante- and post-mortem meat inspection. Particular emphasis is put on the evaluation of students’ learning experiences as well as the opinions of students and official veterinarians. Furthermore, particular circumstances of the abattoir are examined.
Materials and Methods
In a cross-sectional study, two written, standardized methods (an evaluation according to the German Veterinary Medical Society and an in-house survey) were conducted amongst veterinary students of the University of Leipzig who graduated between 2008 and 2014. The evaluation included a checklist and each an opinion poll for students and official veterinarians. Due to improvements, three versions of the survey were used.
Results
The evaluation stated that 82.1 % (n=579) of the 705 participating students visited one and 17.9 % (n=126) several abattoirs for their practical training. Some abattoirs were named more frequently. About 95.7 % (n=675) of the students confirmed the mandatory internship contents (ante-mortem inspection: 95.7 %; n=674 / post-mortem inspection: 96.7 %; n=682 / animal welfare aspects: 95.7 %; n 675). About three quarters of the participants highlighted the extended meat inspection in suspected cases (cattle: 69.4 %; n=489 / pig: 76.7 %; n=541). Many students also mentioned additional topics, such as hygiene and slaughter technology. 79.4 % (n=559) of the trainees recorded a final interview. The opinions of both students and official veterinarians regarding the extramural practical training were largely positive. 54.7 % (n=242) of the official veterinarians claimed to have motivated students for postgraduate meat hygiene activities; only 31.1 % (n=138) of the students indicated this too. Particular situations at the abattoir were documented in the surveys. 97.6 % (n=249), respectively 96.1 % (n=269) of the surveys mentioned that the ante-mortem inspection of cattle or pigs was carried out. The legally compliant meat inspection of the bovine or porcine gastrointestinal tract was described in 7.5 % (n=18) respectively 6.7 % (n=17) of the cases. The liver lymph nodes in pigs were duly examined in 8.2 % (n=30) of the surveys. In 64.8 % (n=406) cases – usually several – animal welfare problems were indicated. In 86.0 % (n=296) of the type-2- and type-3-surveys, it was reported that official measures were taken against these problems.
Conclusions
The concentration of trainees on selected abattoirs can be explained by the nationwide decline in suitable placement sites due to abattoir closures and animal species specializations. To facilitate the organisation of the extramural practical training, it is important (i) to legally regulate an access authorization for veterinary trainees at the abattoirs and (ii) to reduce the placement requirements from two to one duty species. Despite these organisational difficulties, the many varied contents have confirmed that this internship plays an important role as a training format in the training of veterinary students. However, not all participants specified the treatment of each mandatory content, which means that in these cases, the study requirements were not fulfilled. As the survey showed, this can be justified by a lack of or incorrect demonstration at the abattoir. From a professional and didactic point of view, the proportion of students who did not specify the extended post-mortem inspection in suspected cases (23-30%) must be evaluated critically. On the one hand, the official veterinarian must autonomously perform the extended meat inspection in accordance with the European law. Therefore, the practical training is of essential importance. On the other hand, this inspection is carried out on a second slaughter line, which reduces the economic pressure on the veterinarians and offers sufficient practice time without disturbing the routine operation. The frequently documented animal welfare problems can show students the importance of official supervision and their own value as trainees. Finally, the results highlight the need for an enhanced communication between the trainers of the universities and of the competent authorities in order to achieve the optimal use of the teaching format "abattoir internship".
|
Page generated in 0.1252 seconds