Spelling suggestions: "subject:"prefilming"" "subject:"verfilming""
1 |
Le métier de premier assistant réalisateur au Québec contemporainBolduc, Anne-Catherine 08 1900 (has links)
Ce mémoire en Études cinématographiques en est un de recherche-création et porte sur le métier de premier assistant réalisateur au Québec. Le mémoire est accompagné d’un film documentaire (HD 27 min.) réalisé et monté par Anne-Catherine Bolduc. Le matériel de tournage des entrevues (20 heures) constitue le document de référence ayant permis le montage synthèse des entretiens menés auprès des assistants réalisateurs ainsi que la présente étude sur ce métier méconnu. Filmé en 2014, il présente le point de vue de dix professionnels sur le métier de premier assistant à la réalisation. Les deux documents décrivent et analysent en quoi consiste ce métier, en évaluant les fonctions ainsi que les impacts créatifs et organisationnels sur le projet. Ils répondent à deux questions principales, soit qu’est-ce que le travail d’un premier assistant réalisateur au Québec aujourd’hui et a-t-il une influence créative sur la production télévisuelle ou cinématographique. / This memoir in Film studies has been written in a context of research-creation and is about the first assistant director’s work in Quebec. A documentary (HD 27 min.) directed and edited by Anne-Catherine Bolduc goes along the master. The interviews footage (20 hours) is the reference for the executive summary of the documentary’s interviews and for this study of the first assistant director’s unknown job. Filmed in 2014, the documentary presents the viewpoint of ten professionals about the first assistant director’s job. The two documents describe and analyze the first assistant director’s job in evaluating the functions as well as the organizational and creative impacts on the realization. They address two main questions, namely what is the first assistant director’s job currently in Quebec and do the first assistant director have a creative influence on the film or television production.
|
2 |
Air-Assited Atomization Strategies For High Viscosity FuelsMohan, Avulapati Madan 08 1900 (has links) (PDF)
Atomization of fuel is an important pre-requisite for efficient combustion in devices such as gas turbines, liquid propellant rocket engines, internal combustion engines and incinerators. The overall objective of the present work is to explore air-assisted atomization strategies for high viscosity fuels and liquids. Air-assisted atomization is a twin-fluid atomization method in which energy of the gas is used to assist the atomization of liquids. Broadly, three categories of air-assisted injection, i.e., effervescent, impinging jet and pre-filming air-blast are studied. Laser-based diagnostics are used to characterize the spray structure in terms of cone angle, penetration and drop size distribution. A backlit direct imaging method is used to study the macroscopic spray characteristics such as spray structure and spray cone angle while the microscopic characteristics are measured using the Particle/droplet imaging analysis (PDIA) technique.
Effervescent atomization is a technique in which a small amount of gas is injected into the liquid at high pressure in the form of bubbles. Upon injection, the two-phase mixture expands rapidly and shatters the liquid into droplets and ligaments. Effervescent spray characteristics of viscous fuels such as Jatropha and Pongamia pure plant oils and diesel are studied. Measurements are made at various gas-to-liquid ratios (GLRs) and injection pressures. A Sauter Mean Diameter (SMD) of the order of 20 µm is achieved at an injection pressure of 10 bar and GLR of 0.2 with viscous fuels. An image-based method is proposed and applied to evaluate the unsteadiness in the spray. A map indicating steady/unsteady regime of operation has been generated. An optically accessible injector tip is developed which has enabled visualization of the two-phase flow structure inside the exit orifice of the atomizer. An important contribution of the present work is the correlation of the two-phase flow regime in the orifice with the external spray structure. For viscous fuels, the spray is observed to be steady only in the annular two-phase flow regime. Unexpanded gas bubbles observed in the liquid core even at an injection pressure of 10 bar indicate that the bubbly flow regime may not be beneficial for high viscosity oils.
A novel method of external mixing twin-fluid atomization is developed. In this method, two identical liquid jets impinging at an angle are atomized using a gas jet. The effect of liquid viscosity (1 cP to 39 cP) and surface tension (22 mN/m to 72 mN/m) on this mode of atomization is studied by using water-glycerol and water-ethanol mixtures, respectively. An SMD of the order of 40 µm is achieved for a viscosity of 39 cP at a GLR of 0.13 at a liquid pressure of 8 bar and gas pressure of 5 bar. It is observed that the effect of liquid properties is minimal at high GLRs where the liquid jets are broken before the impingement as in the prompt atomization mode. Finally, a pre-filming air-blast technique is explored for transient spray applications. An SMD of 22 µm is obtained with diesel at liquid and gas pressures as low as 10 bar and 8.5 bar, respectively. With this technique, an SMD of 44 µm is achieved for Jatropha oil having a viscosity 10 times higher than that of diesel.
|
Page generated in 0.0317 seconds