This master thesis seeks to explain the approach and position of developing countries in international politics on climate change, focused on specific groups of developing countries within the Group 77. First chapter explain the roots and development of climate change politics, together with the need to combat the climate change. Second chapter lays down the theoretical principles of attributing commitments to developing countries and analysis the position of different groups of developing countries. The last chapter is devoted to the case study of China's stance to international climate change regime and factors that influence its position.

Among many which are placed on modern embedded systems is also the need of storing multiple system boot image versions and the ability to select from them upon boot time, depending on a function which they provide. This thesis describes the development of a system update application for Xilinx Zynq-7000 devices. The application includes a simple embedded HTTP server for a remote file transfer. A client is allowed to upload the boot image file with the system update from either command line application or using the web page developed for this purpose.

Master thesis is focused on signalling analysis of third-generation mobile network UMTS. In first part of master thesis is described a question of standard IMT-2000, introduces the principles of the WCDMA air interface, gives a wide overview of the UMTS system architecture and signal processing. In second part of master thesis is described a question of signalling analysis, including general protocol model for UTRAN terrestrial interfaces. This chapter is focused on elementary procedures, Radio Resource Management procedure examples, Mobility Management procedure examples and Call Control procedure examples in the first place. Last chapter of master thesis is focused on radio network planning of UMTS with practical location of basic station Node-B.

The access system with the Ethernet interface is presented in this diploma thesis. Access control system is based on the RFID technology. Each identification unit reads the users card number and sends the request to the server other the network. Server checks the card number and sends the answer. The doors are opened. The first part of this diploma thesis deals with the theoretical description of the access control systems. All used technologies are described in this first part of this work. The second part of this thesis describes hardware design of the RFID identification unit with the Ethernet interface and microcontroller Rabbit. The last part presents designed communication protocol. This protocol supports AES secure communication standard. The control program of the identification unit and to the software design of the database and the server application is made and described in this work too.

This master´s thesis deals with questions of measuring of cabling systems. There is described the evolution of structured cabling including the rules of their installation, approval and their final measurement. The first part of this work is dedicated to the conception of structured cabling and its history which originated at the beginning of 80s when the first personal computers began to appear at the market. The necessity of mutual communication of their users caused forceful development of networks and technologies. As a result lots of single-purpose, incompatible and mutual independent cabled distributions were developed. This method of cabling was uneconomical, very demanding on service and impractical for network expansion. That’s why the universal cabled system was developed whose baseline became a twisted pair. Characteristics of structured cablings are designed in order it could be possible to transmit whole rang of applications through them. Metallic cables and nowadays also optical cables are used for their installation. The cabling system consists of lots of other items among them we can rank items active and stable. It’s necessary to scale lots of criteria which involve the quality of data transmission in this network. The measurement is done by the devices which comply with basic requirements determined by the standards according to technology. There are described the rules and proper processes of installing cabling systems, which should be followed while installations. At the end of my thesis there are mentioned the results of the measurements on simulation segments of cabling system which serve as completion certificates between an installation company and a consumer.

This thesis describes a protocol for the multiple data collection system and his implementation into Network Simulator 2 environment. The system defines two communication units. CU central unit and measuring unit MU. The units operate according to the rules defined by communication protocol. The content of this work is as follows. At the beginning is described the simulation tool, namely a system NS-2 and a tool for visualization of simulation results, the NAM. This is followed by a description of the proposed protocol, his principle of functions, units description and communication messages. The method of communication between units. Mainly was described the multicast and the types of multicast ASM and SSM. Additionally, was described the principle of unicast communication. This is followed by chapter describing methods of enlargement simulator. Adding an own protocol and support of multicast communication SSM. Adding a new protocol is represented by programming a new agent, a new application and a new protocol header definition. In this chapter are also described the necessary changes in the source files that are need to the recompilation. The main objective of this thesis is own implementation of the proposed protocol. In the programming language C++ were created two agents who represent a central and a measuring unit. These agents were compiled into a simulator and by using a simple script have been tested for functionality. The simulation script define MU 200 and one unit CU. Conclusion of work is devoted to simulation the load line between the central unit and "access" node. It was examined whether the use the method of cumulative acknowledgement saves the transmission capacity of line compared to normal method acknowledgement.

In the first part of my master's thesis the network architecture of IMS (IP Multimedia Subsystem) is presented. The database of subscribers HSS (Home Subscriber Server) and SLF (Subscription Locator Function), as well as a SIP CSCF servers (Call Session Control Functions) process a SIP signalization and an AS application server performing services, etc. I focus on the registration of subscribers in the IMS network with a list of transmitted messages and description of each interface that is used in this network. The most important interfaces, which I described here, are Gm, Mw, Cx, Dx and Sh. Then I focused on security in IMS problems, which are divided into categories of access security and network security. After that is the implementation of IMS network in an open source Open IMS Core System considered under the Linux operating system. Here is the problem description from the actual system installation, through the configuration of all necessary elements of the network to the communication party itself. The communication analysis in the initial registration process and in subsequent communications is described. Finally I created laboratory exercises with a focus on the Open IMS Core System, where students learn about architecture and principle of networks based on IMS technology operation, with individual elements necessary for the operation of the network and their configuration. Students also test simple captured traffic analysis.

Thesis deals with multicast broadcasts, discusses the type of ASM and SSM. Also deals with the principle of RTP / RTCP protocol for large multicast groups, for example, broadcasting IPTV. It was created a model for simulating the behavior of the network load in a large number of receivers. The application was developed in Java and uses the recommendations of RFC3550. There are also analysed processes of communication, initialization, log out, the structure of the data packets and signaling packets. The system is designed that can simulate multicast network and obtain the estimated parameters of the operation, or can operate in real traffic, for example, as a third-party monitor. In both modes, the measurement was carried out model situations. The results of the measurements were then compared. Principle and system control was described in detail. Output measurements are graphically processed and included in the work.

Master’s thesis includes knowledges about mobility support in IPv4 networks and studies abilities for mobility support in IPv6 networks. Describes protocols for mobility support, their functions and topologies like MIPv6 (RFC 3775), FMIPv6 (RFC 5568), HMIPv6 (RFC 5380) and F-HMIPv6. The thesis contains a design of the simulation MIPv6 in the OPNET Modeler program and the measured results are explained. There are analysis of source code for mobility support in MIPv6 too, which were used for design a new protocol according to FMIPv6 in the OPNET. The following parts of the proposal have been successfully resolved. The link-layer events detection, which triggers FMIPv6 protocol and implementation of two new types of messages, RtSolPr and PrRtAdv. Knowledges from this thesis could be used for next development of FMIPv6 in the OPNET. But could be used for generaly development new protocols working at network-layer too.

The thesis deals with MANET networks and it focuses on the routing process. Most attention is paid to the routing protocols AODV and OLSR. These protocols are described in the detail. The aim of the thesis is to create a simulation model of MANET network in OPNET Modeler environment. In this model the AODV protocol is configured. In order to achieve improved characteristics of the network traffic the routing protocol parameters are optimized. Furthermore the process model of AODV protocol in this environment is studied and extended by a new type of message, which allows a transfer of current transmission speed of MANET station network interface. Current transmission rate of stations is retrieved from the statistics. Every station periodically sends a message to neighboring nodes. The node stores the information into the file when a new message arrives.