Bielefeld, Universiẗat, Diss., 2004.

G-quadruplex structures are highly stable alternative DNA structures that can, when not properly regulated, impede replication fork progression and cause genome instability (Castillo Bosch et al, 2014; Crabbe et al, 2004; Koole et al, 2014; Kruisselbrink et al, 2008; London et al, 2008; Lopes et al, 2011; Paeschke et al, 2013; Paeschke et al, 2011; Piazza et al, 2015; Piazza et al, 2010; Piazza et al, 2012; Ribeyre et al, 2009; Sabouri et al, 2014; Sarkies et al, 2012; Sarkies et al, 2010; Schiavone et al, 2014; Wu & Spies, 2016; Zimmer et al, 2016). The aim of this thesis was to identify novel G-quadruplex interacting proteins in Saccharomyces cerevisiae and to unravel their regulatory function at these structures to maintain genome integrity. Mms1 and Rtt101 were identified as G-quadruplex binding proteins in vitro via a pull-down experiment with subsequent mass spectrometry analysis. Rtt101, Mms1 and Mms22, which are all components of an ubiquitin ligase (Rtt101Mms1/Mms22), are important for the progression of the replication fork following fork stalling (Luke et al, 2006; Vaisica et al, 2011; Zaidi et al, 2008). The in vivo binding of endogenously tagged Mms1 to its target regions was analyzed genome-wide using chromatin-immunoprecipitation followed by deep-sequencing. Interestingly, Mms1 bound independently of Mms22 and Rtt101 to G-rich regions that have the potential to form G-quadruplex structures. In vitro, formation of G-quadruplex structures could be shown for the G-rich regions Mms1 bound to. This binding was observed throughout the cell cycle. Furthermore, the deletion of MMS1 caused replication fork stalling as evidenced by increased association of DNA Polymerase 2 at Mms1 dependent sites. A gross chromosomal rearrangement assay revealed that deletion of MMS1 results in a significantly increased genome instability at G-quadruplex motifs compared to G-rich or non-G-rich regions. Additionally, binding of the helicase Pif1, which unwinds G4 structures in vitro (Paeschke et al, 2013; Ribeyre et al, 2009; Sanders, 2010; Wallgren et al, 2016), to Mms1 binding sites was reduced in mms1 cells. The data presented in this thesis, together with published data, suggests a novel mechanistic model in which Mms1 binds to G-quadruplex structures and enables Pif1 association. This allows for replication fork progression and genome integrity. / Bei G-quadruplex Strukturen handelt es sich um stabile Sekundärstrukturen der DNA, welche das Fortschreiten der Replikationsgabel behindern und Genominstabilität verursachen können, falls sie nicht konsequent reguliert werden (Castillo Bosch et al, 2014; Crabbe et al, 2004; Koole et al, 2014; Kruisselbrink et al, 2008; London et al, 2008; Lopes et al, 2011; Paeschke et al, 2013; Paeschke et al, 2011; Piazza et al, 2015; Piazza et al, 2010; Piazza et al, 2012; Ribeyre et al, 2009; Sabouri et al, 2014; Sarkies et al, 2012; Sarkies et al, 2010; Schiavone et al, 2014; Wu & Spies, 2016; Zimmer et al, 2016). Ziel dieser Doktorarbeit war es, neue Proteininteraktionspartner dieser Strukturen in Saccharomyces cerevisiae zu identifizieren und zu untersuchen, wie diese Proteine die Strukturen regulieren um Genomstabilität zu gewährleisten. Mit Hilfe eines Pulldown Assays und anschließender massenspektrometrischer Analyse wurden Mms1 und Rtt101 in vitro als Interaktionspartner von G-quadruplex Strukturen identifiziert. Rtt101, Mms1 und Mms22, Komponenten der Ubiquitinligase Rtt101Mms1/Mms22, spielen eine wichtige Rolle beim Fortschreiten der Replikationsgabel, falls dieses durch Agenzien gehemmt wurde (Luke et al, 2006; Vaisica et al, 2011; Zaidi et al, 2008). Durch Chromatin-Immunpräzipitation mit anschließender Hochdurchsatzsequenzierung wurden die Bindestellen von Mms1 identifiziert. Interessanterweise hat Mms1 genomweit an G-reiche Sequenzen gebunden. Diese G-reichen Sequenzen bildeten G-quadruplex Strukturen in vitro aus. Die Bindung von Mms1 erfolgte unabhängig von Rtt101 und Mms22 sowie während des gesamten Zellzyklus. Außerdem kam es zu einer Verlangsamung der Replikationsgabel in mms1 Zellen, was durch eine verstärkte Bindung der DNA Polymerase 2 nachgewiesen wurde. Ein gross chromsomal rearrangement assay zeigte, dass die Genominstabilität in mms1 Zellen signifikant erhöht ist, wenn G-quadruplex Motive, im Vergleich zu nicht-G-reichen oder G-reichen Kontrollregionen, vorhanden sind. Zudem war die Bindung der Helikase Pif1, welche G-quadruplex Strukturen in vitro entwindet (Paeschke et al, 2013; Ribeyre et al, 2009; Sanders, 2010; Wallgren et al, 2016), stark reduziert, wenn Mms1 fehlte. Mit Hilfe der in dieser Doktorarbeit gewonnenen Ergebnisse, sowie mit Hilfe publizierter Daten, lässt sich ein Model postulieren, in welchem Mms1 an G-quadruplexe bindet und somit die Bindung von Pif1 ermöglicht. Dadurch werden das Fortschreiten der Replikationsgabel und die Genomstabilität gewährleistet.

Squaraine dyes have attracted more attention in the past decade due to their strong and narrow absorption and fluorescence along with the easily functionalized molecular structure. One successful approach of core functionalization is to replace one oxygen of the squaric carbonyl group with a dicyanomethylene group, which shifts the absorption and emission into the near infrared (NIR) region and at the same time leads to a rigid, planar structure with C2v symmetry. However, such squaraines tend to aggregate cofacially in solution due to dispersion forces and dipole-dipole interactions, usually leading to H-type exciton coupling with undesired blue-shifted spectrum and quenched fluorescence. Therefore, the goal of my research was the design of dicyanomethylene-substituted squaraine dyes that self-assemble into extended aggregates in solution with J-type coupling, in order to retain or even enhance their outstanding optical properties. Toward this goal, bis(squaraine) dyes were envisioned with two squaraine units covalently linked to trigger a slip-stacked packing motif within the aggregates to enable J-type coupling. In my first project, bis(squaraine) dye BisSQ1 was synthesized, in which two dicyanomethylene squaraine chromophores are covalently linked. Concentration and temperature-dependent UV/Vis/NIR spectroscopy experiments reveal that BisSQ1 undergoes cooperative self-assembly resulting in J-type aggregates in a solvent mixture of toluene/1,1,2,2-tetrachloroethane (TCE) (98:2, v/v). The J type exciton coupling is evident from the significantly red shifted absorption maximum at 886 nm and the fluorescence peak at 904 nm. In conclusion, this was a first example to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by simply connecting two dyes in a head-to-tail bis chromophore structure. Connecting two squaraine dyes with an additional phenylene spacer (BisSQ2) leads to two different polymorphs with very distinct absorption spectra upon cooling down a solution of BisSQ2 in a solvent mixture of toluene/TCE (98:2, v/v) with different rates. Accordingly, rapid cooling resulted in rigid helical nanorods with an absorption spectrum showing a panchromatic feature, while slow cooling led to a sheet-like structure with a significant bathochromic shift in the absorption spectrum. It was discovered that the conventional molecular exciton model failed to explain the panchromatic absorption features of the nanorods for the given packing arrangement, therefore more profound theoretical investigations based on the Essential States Model (ESM) were applied to unveil the importance of intermolecular charge transfer (ICT) to adequately describe the panchromatic absorption spectrum. Moreover, the red-shift observed in the spectrum for the sheet-like structure can be assigned to the interplay of Coulomb coupling and ICT-mediated coupling. Furthermore, the same bis-chromophore strategy was adopted for constructing an NIR-II emitter with a bathochromically-shifted spectrum. In chloroform, BisSQ3 exhibits an absorption maximum at 961 nm with a significant bathochromic shift (1020 cm−1) compared to the reference mono-squaraine SQ, indicating intramolecular J-type coupling via head-to-tail arrangement of two squaraine dyes. Moreover, BisSQ3 shows a fluorescence peak at 971 nm with a decent quantum yield of 0.33%. In less polar toluene, BisSQ3 self-assembles into nanofibers with additional intermolecular J-type coupling, causing a pronounced bathochromic shift with absorption maximum at 1095 nm and a fluorescence peak at 1116 nm. Thus, connecting two quinoline-based squaraines in a head-to-tail fashion leads to not only intra-, but also intermolecular J-type exciton coupling, which serves as a promising strategy to shift the absorption and emission of organic fluorophores into the NIR-II window while retaining decent quantum yields. In conclusion, my research illustrates based on squaraine dyes how a simple modification of the molecular structure can significantly affect the aggregation behavior and further alter the optical properties of dye aggregates. Elongated supramolecular structures based on dicyanomethylene substituted squaraine dyes were successfully established by covalently linking two squaraine units to form a bis-chromophore structure. Then, a simple but efficient general approach was established to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by directly connecting two squaraine dyes in a head-to-tail fashion without spacer units. Moreover, the additional spacer between the squaraine dyes in BisSQ2 allowed different molecular conformations, which leads to two different morphologies depending on the cooling rates for a hot solution. Hence, this is a promising strategy to realize supramolecular polymorphism. In general, it is expected that the concept of constructing J-aggregates by the bis-chromophore approach can be extended to entirely different classes of dyes since J-aggregates possess a variety of features such as spectral shifts into the NIR window, fluorescence enhancement, and light harvesting, which are commonly observed and utilized for numerous fundamental studies and applications. Moreover, the insights on short-range charge transfer coupling for squaraine dyes is considered of relevance for all materials based on alternating donor-acceptor π-systems. The panchromatic spectral feature is in particular crucial for acceptor-donor-acceptor (ADA) dyes, which are currently considered as very promising materials for the development of bulk heterojunction solar cells. / Squarainfarbstoffe haben in den letzten Jahren aufgrund ihrer hervorragenden optischen Eigenschaften, zu denen ein Cyanin-ähnliches Absorptions- und Fluoreszenzverhalten zählt, in Kombination mit einer leicht funktionalisierbaren Molekülstruktur immer mehr Aufmerksamkeit auf sich gezogen.22 Ein erfolgreicher Ansatz der Kernfunktionalisierung besteht darin, ein Sauerstoffatom der Quadratsäure-Carbonylgruppe durch eine Dicyanomethyleneinheit zu ersetzen, was die Absorption und Emission in den nahen infraroten (NIR-) Bereich verschiebt und gleichzeitig zu einer starren planaren Struktur mit C2v Symmetrie und einem Grundzustandsdipolmoment führt.27 Diese Eigenschaften haben sich als vorteilhaft für die π-π-Aggregation von diesen Squarainen auf G-Quadruplex (G4) Strukturen erwiesen, wie in Kapitel 6 beschrieben. Solche Squaraine neigen jedoch zur Bildung von Dimeren oder kleinen Aggregaten in Lösung mit kofazialen Chromophoranordnungen aufgrund Dispersionskräften und Dipol-Dipol-Wechselwirkungen. Dies resultiert in der Regel zu einer H-artigen exzitonischen Kopplung mit unerwünschten, blauverschobenen Absorptionsbanden und gelöschter Fluoreszenz.28 Daher war das Ziel dieser Dissertation, Dicyanomethylen-substituierte Squarainfarbstoffe zu entwickeln, die sich in Lösung zu verlängerten Aggregaten mit J-artiger Kopplung selbst organisieren. Auf diese Weise sollten die ausgezeichneten optischen Eigenschaften der Squarainfarbstoffe erhalten oder sogar verbessert werden. Zu diesem Zweck, wurden Bis(squarain)-Farbstoffe synthetisiert, in denen zwei Squarain-Einheiten kovalent verbunden sind, was zu einer gestapelten Anordnung mit longitudinalem Versatz innerhalb der Aggregate und damit zu einer J-artigen Kopplung führt. ...