No description available.

Schnelltests sind eine weit verbreitete Analysemethode, um vor Ort schnelle analytische Aussagen treffen zu können. Ein möglicher Zugang zu Schnelltests für Analyten in geringer Konzentration könnten Messung von Oberflächenverstärkten Raman-Spektren sein. In der vorliegenden Arbeit wird insbesondere auf drei Aspekte der SERS-Messungen (= Oberflächenverstärkte Raman-Streuung) eingegangen: die Reproduzierbarkeit der SERS-Signalintensität, die Interpretation der Konzentrationskurven und die Analyse von Probengemischen. Für die Untersuchung der Reproduzierbarkeit wurden verschiedene Auftragungsmethoden und Messsysteme getestet und es wurde untersucht, wie reproduzierbar die Signalintensitäten über einen längeren Zeitraum sind. Dabei wurde festgestellt, dass die Kombination von einer homogenen Auftragung der Nanopartikelsuspensionen auf dem Papier und ein großer Durchmesser des Laser- und Detektionspunktes auf der Probe zu einer stabileren Signalintensität führen. Die bei einem Labormessaufbau eine Stabilität des Messsignals von ca. 20 % relativer Standardabweichung über einen Zeitraum von ca. 2,5 Monaten lieferte. Für die Analyse und Auswertung der Abhängigkeiten der SERS-Signalintensität von der Konzentration des Analyten wurden Konzentrationsreihen von verschiedenen Verbindungen aufgenommen. Die Messdaten konnten mit einer Langmuir-Isotherme beschrieben und mit dem Langmuir-SERS-Modell erklärt werden. Für die gemessenen Thiolverbindungen wurde zudem noch eine weitere Möglichkeit der quantitativen Analyse gefunden, die auf der Auswertung der Verschiebung von bestimmten SERS-Banden im Spektrum in Abhängigkeit von der Analytkonzentration beruht. Für die Analysen der Mehrkomponenten-Lösungen wurden die Papierbasierten Mikrofluidik-Analysesysteme (µPADs) eingesetzt. Hier konnte beobachtet werden, dass Analyten aus einer Lösung auf Grund ihrer hohen Affinität zu den Nanopartikeln abgetrennt werden können und es so möglich ist, diese zu analysieren. / Rapid tests are widely used analytical methods for obtaining analytical information immediately on site. Surface enhanced Raman scattering (SERS) is a possible detection method for compounds in diluted samples. This thesis focuses mainly on three aspects: reproducibility of SERS signal intensity, interpretation of concentration curves and analysis of sample mixtures. The signal reproducibility was investigated using different deposition methods and measurement systems and the reproducibility of measurements was tested over longer periods of time. It was found that the most stable signal intensity was obtained using a combination of homogeneous deposition of a nanoparticle suspension on paper and a detection configuration that involves large diameters of both, the laser and the detection spot on the sample. It was shown with a laboratory setup, that comparatively stable measurements are possible with a relative standard deviation of approx. 20 % over a period of approx. 2.5 months. For the analysis and interpretation of the dependence of the SERS signal intensity on the concentration of the analyte, concentration series of different compounds were measured. The measurement data could be fitted with a Langmuir isotherm and explained with the Langmuir SERS model. For the measured thiol compounds an alternative option for quantification was found: the shift of certain SERS bands in the Raman spectrum as a function of analyte concentration. For the analysis of compound mixture in solution microfluidic paper-based analytical devices (µPADs) were used. It was observed that certain analytes which have a high affinity for the nanoparticles can be separated from the solution and thereby analyzed.

Over the last years, varieties of technologies for biofilm analysis were developed and established. They work on different principles and deliver information about biofilms on different information levels. In this work, chip-calorimetry was applied as an analytical tool that measures heat produced from biofilms. Any change of metabolism in biofilms is reflected by a changed heat flow. The heat, which is the integral of the heat flow vs. time, is quantitatively related to the growth stoichiometry of the biofilm, as described by the Hess’ Law. The heat flow is related to the growth kinetics with the reaction heat as proportionality factor. The results from the calorimetric measurement thus, deliver general information about growth stoichiometry and kinetics. The other interpretation of calorimetric results bases on the assumed proportionality between heat flow and oxygen consumption rate (- 460 kJ/mol ). This ratio is called oxycaloric equivalent. Because in case of aerobic growth the majority of oxygen is consumed in catabolic processes during the electron transport phosphorylation, calorimetry is assumed to provide information about the catabolic side of the metabolism. The newly developed chip-calorimeter applied in this work is much more suitable for biofilm studies compared to conventional microcalorimeters due to the flow-through design of the calorimetric chamber. The measurement of undisturbed growing biofilms and the comparison with conventional biofilm analysis tools (i.e. plate counts, confocal laser scanning microscopy (CLSM), and the determination of intermediates’ concentrations (e.g. ATP)) demonstrate the proper functionality of the calorimetric method and the related cultivation procedure by delivering measurement results in the range of literature values. However, when the biofilms were challenged with antimicrobial agents i.e. antibiotics, bacteriophage, and predatory bacteria, the calorimetric results surprisingly deviated from the reference analyses. By combining the results of the calorimetric and reference analyses, additional information about the antimicrobial effects on biofilms can be acquired. Combination of heat measurement and plate counts, which is one of the most conventional approaches, demonstrated that antimicrobials (especially the bactericidal acting kanamycin) could cause the loss of culturability while the cells were still metabolically active. The measurement of ATP content resulted in values out of the typical range, which indicated that antimicrobial treatments disturbed the cellular ATP regulation and the ATP concentration was no longer linearly correlated to the cell number. ATP measurements are therefore not suitable for antimicrobial susceptibility testing. The comparison of heat profiles with the biovolume determined by quantification of microscopic images shows an elevated cell specific heat production rate after the introduction of some antimicrobials (antibiotics and bacteriophage). In case of antibiotics, this can be explained as a consequence of the bacterial defense mechanisms. Most of the described defense mechanisms against antibiotics need biological energy and therefore drive the electron transport phosphorylation (ETP). In case of biofilm treatments with bacteriophage, the trigger of increasing ETP might be the synthesis of phage proteins, hull material, and genetic information molecules. In aerobic conditions, oxygen is used as terminal electron acceptor. Elevated ETP leads therefore to an increase in oxygen consumption, which correlates to the heat production using oxycaloric equivalent as a factor. These correlations explain the increase of cell specific heat productions as biofilms were challenged by antibiotics and bacteriophage. However, also a decrease of specific heat production was observed (in case of predatory bacteria). Here, the predatory bacteria activity caused various damages in host cells, including the interruption of ETP. With these experiments, chip-calorimetry was demonstrated as a promising complementary tool in biofilm research, which provides deeper insights about metabolic activity and alterations. It benefits from the noninvasive handling and the online, real-time measurement that allow the method to be applied for monitoring purposes. Furthermore, its miniaturized dimension allows easy integration in more complex analytic systems and also reduces experiment costs with minimal media/chemical consumption. This thesis also demonstrates the potential development of chip-calorimetry to be more suitable for routine analyses. The use of superparamagnetic beads as matrix to grow biofilms allows regulated transfer of biofilm samples into and from the measurement chamber. This was an initial step towards automation and higher-throughput analysis. One further outcome of the thesis is based on the highly interesting fact about the elevated heat production rate of the host cells induced by the phage infection observed in the chip- calorimetric experiments. The volume specific detection limit of the chip-calorimeter is lower compared to a commercial microcalorimeter. Thus, the infection effect of phages was additionally measured in microcalorimeter to get better quantitative information about the thermal effect of the infection. The results showed that the immediate heat increase after the addition of phage into the solution of the host cells appeared to be quantitatively related to the infection factor, MOI (Multiplicity of Infection). Unfortunately, microcalorimetric measurements in closed ampoules are often subjected to the oxygen limitation. Thus, this problem of microcalorimetric measurement has been addressed. The combination of experimental results and mathematical modeling showed that the rate of metabolism in the static ampoules is defined by the diffusion rate of oxygen into media. This factor has to be considered while designing biological experiments in closed calorimetric measuring chambers and interpreting the calorimetric results for their biological meaning. Some possible solutions to overcome the oxygen bioavailability problem are e.g. to design the experiments with low biomass, or by using media with elevated density to float the biomass at the interface to air and thus to reduce the diffusion path.

The centrosome is a dynamic organelle found in all animal cells that serves as a microtubule organizing center during cell division. Most of the centrosome components have been identified by genetic screens over the last decade, but little is known about how these components interact with each other to form a functional centrosome. Towards a better understanding of the molecular organization of the centrosome, we investigated the mechanism that regulates the size of the centrosome in the early C. elegans embryo. For this, we monitored fluorescently labeled centrosomes in living embryos and developed a suite of image analysis algorithms to quantify the centrosomes in the resulting 3D time-lapse images. In particular, we developed a novel algorithm involving a two-stage linking process for tracking entrosomes, which is a multi-object tracking task. This fully automated analysis pipeline enabled us to acquire time-resolved data of centrosome growth in a large number of embryos and could detect subtle phenotypes that were missed by previous assays based on manual image analysis. In a first set of experiments, we quantified centrosome size over development in wild-type embryos and made three essential observations. First, centrosome volume scales proportionately with cell volume. Second, beginning at the 4-cell stage, when cells are small, centrosome size plateaus during the cell cycle. Third, the total centrosome volume the embryo gives rise to in any one cell stage is approximately constant. Based on our observations, we propose a ‘limiting component’ model in which centrosome size is limited by the amounts of maternally derived centrosome components. In a second set of experiments, we tested our hypothesis by varying cell size, centrosome number and microtubule-mediated pulling forces. We then manipulated the amounts of several centrosomal proteins and found that the conserved centriolar and pericentriolar material protein SPD-2 is one such component that determines centrosome size.

The centrosome is a dynamic organelle found in all animal cells that serves as a microtubule organizing center during cell division. Most of the centrosome components have been identified by genetic screens over the last decade, but little is known about how these components interact with each other to form a functional centrosome. Towards a better understanding of the molecular organization of the centrosome, we investigated the mechanism that regulates the size of the centrosome in the early C. elegans embryo. For this, we monitored fluorescently labeled centrosomes in living embryos and developed a suite of image analysis algorithms to quantify the centrosomes in the resulting 3D time-lapse images. In particular, we developed a novel algorithm involving a two-stage linking process for tracking entrosomes, which is a multi-object tracking task. This fully automated analysis pipeline enabled us to acquire time-resolved data of centrosome growth in a large number of embryos and could detect subtle phenotypes that were missed by previous assays based on manual image analysis. In a first set of experiments, we quantified centrosome size over development in wild-type embryos and made three essential observations. First, centrosome volume scales proportionately with cell volume. Second, beginning at the 4-cell stage, when cells are small, centrosome size plateaus during the cell cycle. Third, the total centrosome volume the embryo gives rise to in any one cell stage is approximately constant. Based on our observations, we propose a ‘limiting component’ model in which centrosome size is limited by the amounts of maternally derived centrosome components. In a second set of experiments, we tested our hypothesis by varying cell size, centrosome number and microtubule-mediated pulling forces. We then manipulated the amounts of several centrosomal proteins and found that the conserved centriolar and pericentriolar material protein SPD-2 is one such component that determines centrosome size.

Over the last years, varieties of technologies for biofilm analysis were developed and established. They work on different principles and deliver information about biofilms on different information levels. In this work, chip-calorimetry was applied as an analytical tool that measures heat produced from biofilms. Any change of metabolism in biofilms is reflected by a changed heat flow. The heat, which is the integral of the heat flow vs. time, is quantitatively related to the growth stoichiometry of the biofilm, as described by the Hess’ Law. The heat flow is related to the growth kinetics with the reaction heat as proportionality factor. The results from the calorimetric measurement thus, deliver general information about growth stoichiometry and kinetics. The other interpretation of calorimetric results bases on the assumed proportionality between heat flow and oxygen consumption rate (- 460 kJ/mol ). This ratio is called oxycaloric equivalent. Because in case of aerobic growth the majority of oxygen is consumed in catabolic processes during the electron transport phosphorylation, calorimetry is assumed to provide information about the catabolic side of the metabolism. The newly developed chip-calorimeter applied in this work is much more suitable for biofilm studies compared to conventional microcalorimeters due to the flow-through design of the calorimetric chamber. The measurement of undisturbed growing biofilms and the comparison with conventional biofilm analysis tools (i.e. plate counts, confocal laser scanning microscopy (CLSM), and the determination of intermediates’ concentrations (e.g. ATP)) demonstrate the proper functionality of the calorimetric method and the related cultivation procedure by delivering measurement results in the range of literature values. However, when the biofilms were challenged with antimicrobial agents i.e. antibiotics, bacteriophage, and predatory bacteria, the calorimetric results surprisingly deviated from the reference analyses. By combining the results of the calorimetric and reference analyses, additional information about the antimicrobial effects on biofilms can be acquired. Combination of heat measurement and plate counts, which is one of the most conventional approaches, demonstrated that antimicrobials (especially the bactericidal acting kanamycin) could cause the loss of culturability while the cells were still metabolically active. The measurement of ATP content resulted in values out of the typical range, which indicated that antimicrobial treatments disturbed the cellular ATP regulation and the ATP concentration was no longer linearly correlated to the cell number. ATP measurements are therefore not suitable for antimicrobial susceptibility testing. The comparison of heat profiles with the biovolume determined by quantification of microscopic images shows an elevated cell specific heat production rate after the introduction of some antimicrobials (antibiotics and bacteriophage). In case of antibiotics, this can be explained as a consequence of the bacterial defense mechanisms. Most of the described defense mechanisms against antibiotics need biological energy and therefore drive the electron transport phosphorylation (ETP). In case of biofilm treatments with bacteriophage, the trigger of increasing ETP might be the synthesis of phage proteins, hull material, and genetic information molecules. In aerobic conditions, oxygen is used as terminal electron acceptor. Elevated ETP leads therefore to an increase in oxygen consumption, which correlates to the heat production using oxycaloric equivalent as a factor. These correlations explain the increase of cell specific heat productions as biofilms were challenged by antibiotics and bacteriophage. However, also a decrease of specific heat production was observed (in case of predatory bacteria). Here, the predatory bacteria activity caused various damages in host cells, including the interruption of ETP. With these experiments, chip-calorimetry was demonstrated as a promising complementary tool in biofilm research, which provides deeper insights about metabolic activity and alterations. It benefits from the noninvasive handling and the online, real-time measurement that allow the method to be applied for monitoring purposes. Furthermore, its miniaturized dimension allows easy integration in more complex analytic systems and also reduces experiment costs with minimal media/chemical consumption. This thesis also demonstrates the potential development of chip-calorimetry to be more suitable for routine analyses. The use of superparamagnetic beads as matrix to grow biofilms allows regulated transfer of biofilm samples into and from the measurement chamber. This was an initial step towards automation and higher-throughput analysis. One further outcome of the thesis is based on the highly interesting fact about the elevated heat production rate of the host cells induced by the phage infection observed in the chip- calorimetric experiments. The volume specific detection limit of the chip-calorimeter is lower compared to a commercial microcalorimeter. Thus, the infection effect of phages was additionally measured in microcalorimeter to get better quantitative information about the thermal effect of the infection. The results showed that the immediate heat increase after the addition of phage into the solution of the host cells appeared to be quantitatively related to the infection factor, MOI (Multiplicity of Infection). Unfortunately, microcalorimetric measurements in closed ampoules are often subjected to the oxygen limitation. Thus, this problem of microcalorimetric measurement has been addressed. The combination of experimental results and mathematical modeling showed that the rate of metabolism in the static ampoules is defined by the diffusion rate of oxygen into media. This factor has to be considered while designing biological experiments in closed calorimetric measuring chambers and interpreting the calorimetric results for their biological meaning. Some possible solutions to overcome the oxygen bioavailability problem are e.g. to design the experiments with low biomass, or by using media with elevated density to float the biomass at the interface to air and thus to reduce the diffusion path.