Bond rupture is an experimental methodology that is used to augment a conventional mass balance biosensor. A good point-of-care biosensor is fast, reliable, simple, cost-effective, and detects low concentrations of the target analyte. Biosensor development is a multidisciplinary field and bond rupture testing is of technical interest to many groups. The Bond rupture methodology endows a mass probe with the ability to discern bond strength. The recognition of specific bonds by mass loading is separated from erroneous non-specific binding by a probe of the force between the analyte and the transducer. Bond rupture is achieved by acoustic excitation of the point of attachment. The force is incremented gradually until rupture occurs. The advancement of bond rupture biosensors beyond the lab requires improved understanding of the mechanisms of bond rupture by base excitation, the transducers, and the supporting hardware. Bond rupture has traditionally been used in conjunction with the Quartz Crystal Microbalance (QCM). There exists, however, a variety of sensors and transducers to which the bond rupture methodology could be applied. The time, cost and experience required for comprehensive investigation of all avenues is prohibitive. To further the development of bond rupture characteristic experiments are designed and carried out on the QCM platform. Numerical simulations are constructed which model the current bond rupture approach. This work is limited to the simulation of bond rupture by base excitation. From the results of the experimental investigation a number of improvements to the bond rupture technique are proposed. Improvements are tested by simulation and the Surface Acoustic Wave (SAW) device is selected to advance the bond rupture craft. A prototype SAW bond rupture device is designed. The prototype device is manufactured and tested, confirming the principle of SAW bond rupture. Future work is required to progress the SAW bond rupture methodology before possible integration with other sensor systems. Because of this work, and the evaluation of the SAW bond rupture prototype, much is learned about the advancement of SAW device bond rupture.

A técnica de Microbalança de Cristal de Quartzo (QCM) tem sido utilizada para a aplicação em biossensores. Esta técnica consiste no monitoramento da freqüência de oscilação do cristal de quartzo e a variação de freqüência está relacionada com a variação de massa na superfície do cristal por meio da equação de Sauerbrey. Porém, sabe-se que há discrepância entre a massa calculada pela equação de Sauerbrey e a massa real aderida na superfície do cristal de quartzo, sendo tal discrepância causada por fatores tais como a viscoelasticidade, o que é especialmente observado para macromoléculas e sistemas biológicos. Com a técnica de Admitância Eletroacústica (AE) é possível analisar a massa real devido à análise em separado dos parâmetros que compõem o circuito equivalente do cristal de quartzo e também inferir informações sobre a estrutura das monocamadas montadas sobre a superfície do cristal de quartzo. Neste trabalho foi utilizada técnica de AE para se potencializar e detalhar o estudo da formação de monocamadas automontadas e interações entre diferentes proteínas e carboidratos. Em muitos casos verificou-se que durante a formação de determinadas monocamadas, grande parte da variação de massa estava relacionada a interações fracas e não-específicas. Também durante a formação das monocamadas de tióis de cistamina, verificou-se que a estrutura da monocamada é extremamente dependente das concentrações iniciais de cistamina utilizadas para formar a monocamada. As interações entre proteínas e carboidratos foram realizadas após formação de multicamadas nas quais as proteínas eram imobilizadas para depois estudar-se, então, sua interação com carboidratos específicos. No caso da Jacalina, um tipo de lectina, observou-se interações bastante específicas com a fetuína e interações fracas com a alfa-lactose. A atividade da enzima GumH também foi testada com sucesso utilizando a técnica de AE. / The Quartz Crystal Microbalance (QCM) has been largely used for biosensor applications. This technique consists on monitoring quartz crystal oscillation frequency. The relationship of quartz crystal frequency variation with mass deposited on the crystal surface is described by Sauerbrey´s equation. However, the relationship is not directly inferred and discrepancy exists caused mainly by viscoelasticity features of mass adsorbed on the quartz crystal surface. The viscoelastic influence is very common to be observed especially for macro-molecules and biological systems. By using Electroacoustic Admittance (EA) technique it is possible to calculate and separate the real mass deposited over the quartz crystal from other contributions. Therefore, the EA was used to infer about self-assembly monolayer structure being deposited over the quartz crystal. In this work EA technique was used to study details of self-assembled monolayer formation and specific interactions between different proteins and carbohydrate molecules. It was observed that during monolayer formation the majority of mass variation was related to non-specific interactions. For instance, regarding cystamine monolayer formation it was observed that the monolayer structure is dependent on the cystamine concentrations in the liquid medium. The study of interactions between proteins and carbohydrates was conducted by means of multilayers approach in which the proteins are immobilized previously to study the interaction between its active sites and carbohydrates. In the specific case of Jacalin, a type of lectin, it was observed a large formation of specific bonding between this protein and alpha-lactose or fetuin. The GumH enzyme activity was also tested successfully by using of EA technique.

A deposição em regime de subtensão (DRS) de cádmio e chumbo foi estudada sobre ouro e filmes de selênio em meio ácido. Os estudos foram realizados utilizando a voltametria cíclica (VC) e a microbalança eletroquímica de cristal de quartzo (MECQ). Foi observado que o cádmio e o chumbo se depositam de formas diferentes sobre ouro e sobre os filmes de selênio. O cádmio quando depositado sobre o eletrodo de ouro ocupa um átomo de ouro por ad-átomo, fornecendo uma carga associada à formação da monocamada adsorvida de aproximadamente 42 µC cm-2, que corresponde a um recobrimento de 0,15 monocamadas. Os resultados com a MECQ mostraram que a deposição em regime de subtensão do Cd ocorre com uma forte presença da adsorção de ânions perclorato e bissulfato. A DRS de cádmio sobre os filmes de selênio ocorre de maneira semelhante a que foi observada sobre o eletrodo de ouro, porém a carga total da monocamada adsorvida foi de 195,7 µC cm-2, que é um pouco maior do que a carga total para a formação de uma monocamada de selênio sobre ouro. Além disso, foi observado que o cádmio difunde no filme de selênio, e que a co-adsorção de ânions e água durante a formação da monocamada de cádmio foi negligenciável. O ad-átomo de chumbo ocupa dois átomos de ouro e a carga de formação da monocamada é atribuída a contribuições de dois picos relacionados com a DRS. O recobrimento máximo chega a 0,3 monocamadas de chumbo sobre ouro, com a deposição do tipo loosely packed. O processo de DRS sobre os filmes de selênio ocorre com a formação de um único pico. A formação do segundo pico sofre interferência da formação de H2Se que ocorre na superfície do filme de selênio e modifica o tipo de empacotamento dos ad-átomos de chumbo sobre o substrato eletródico. O recobrimento obtido com a DRS foi de 0,7 monocamadas de chumbo sobre selênio. A co-adsorção de ânions e água foi constante, tanto em estudos sobre o eletrodo de ouro, como sobre os filmes de selênio. O estudo das propriedades dos filmes de selênio modificados por ad-átomos de cádmio e chumbo foi efetuado por medidas de cronoamperometria para altos tempos de polarização. Foi observado que o cádmio difunde para a fase do filme de selênio, em função do seu alto coeficiente de difusão no estado sólido, formando o composto CdSe. Por outro lado, este processo de difusão não foi observado para o chumbo, não havendo evidências de formação do composto PbSe. A combinação da voltametria cíclica com a microbalança eletroquímica de cristal de quartzo possibilitou acompanhar as mudanças nos mecanismos de formação de monocamadas de cádmio e chumbo em potenciais de subtensão, assim como a inibição da formação do H2Se. Este último efeito foi marcante na DRS de chumbo, onde foi alterada a forma de empacotamento do ad-átomo na superfície. / Cd and Pb underpotential deposition (UPD) on gold electrode and selenium thin film, from acid media, were studied using cyclic voltammetry (CV) and electrochemical quartz crystal microbalance (EQCM). Different form of deposition for cadmium and lead were observed on gold electrode and selenium thin film. The presence of one peak in the positive sweep with a total charge density value between 42 60 µC cm-2 was observed from the results obtained for Cd upd on Au. This result is attributed to a covering of 0.15 0.20 Cd monolayer on gold electrode with the occupation of one active site by each Cd ad-atom. EQCM results suggest a large increase in mass upon Cd upd, which appears to result from co-adsorbed perchlorate and bisulfate anions. The upd of cadmium on the selenium films were similar to the observed on the gold electrode; however with a higher associated charge of 196 µC cm-2. Moreover, the cadmium upd process on selenium is accompanied by the diffusion of cadmium into the bulk of Selenium films. Also, the co-adsorption of anions and water during cadmium deposition on Selenium films were negligenceable. The UPD process of Pb ad-atoms on gold electrodes occurs with the occupation of two gold atoms for ad-atom ones. Two electrochemical processes are observed and the charge values were conferred a low covering the 0.3 monolayer, with a wrapping up of the type loosely packed. The co-adsorption of perchlorate anions and water were observed during UPD process. The UPD process of Pb ad-atoms on the selenium films is complex, and the formation of H2Se modifies the type of wrapping up of lead ad-atoms on the electrode surface. In this case, that the gotten covering were 0.7 monolayer of lead on selenium, were observed the co-adsorption of anions and water in this UPD process. During the studies carried through for cronoamperometry in high times of polarization (UPD potentials) on the Se films were observed that the cadmium spreads out for the phase of the selenium film. This phenomenon occurs due to the high coefficient of diffusion in the solid state of the Cd, allowing the formation of the CdSe. On the other hand, this process of diffusion was not so evident for the lead, that presents a low coefficient of diffusion in the solid state, and thus, do not support the formation of PbSe. The UPD studies by cyclic voltammetry combined with electrochemical quartz crystal microbalance measurements allowed to observe the changes in the monolayers formation mechanisms of cadmium and lead, as well as the inhibition of H2Se formation. This effect was found in the lead UPD, where was modified the form of packing up of the adatom in the surface.

The diploma thesis is focused on the preparation and optimization of molecularly imprinted polymers (MIP) selective for chymotrypsinogen A as well as on the use of these MIP as recognition entities in the sensor. MIP was prepared by suspension polymerization using a mixture of functional methacrylate-based monomers. Prepared MIP was optimized (e.g. binding properties, selectivity and isolation of chymotrypsinogen from a complex matrix of human breath) by capillary electrophoresis with fluorescence detection ( = 532 nm). Finally, the combination of MIP with quartz microbalances was demonstrated as a promising sensor for the detection of proteins from human breath condensate.

<div> Here, the quartz crystal microbalance with dissipation monitoring (QCM-D) is employed to explore the interaction of the various free oxidant species with condensed PA model membranes in order to improve our understanding of how the interaction with these species affects rates of membrane chlorination and alter membrane structure. Molecular-scale mass uptake and changes in the dissipative nature of the of the model membranes as measured by the QCM is correlated to performance changes in interfacially polymerized PA reverse osmosis (RO) membranes. Leveraging newly gained insights from these measured interactions, new strategies are explored to improve flux and chlorine resistance using novel membrane structure and chemistry.<br></div>

This work deals with investigation of intercalation of alkaline metals in electrochromic devices by the help of the quartz crystal microbalance method. The general aim is to investigate the influence of molar mass and resistance on properties of vanadium pentoxide and tungsten trioxide electrochromic films. The main measuring method used for investigating of interacalation of sodium and lithium ions into these films is the cyclic voltammetry. Drawn graphs reveals that sodium and lithium ions shows different qualities during intercalation, particularly in participation of solvent, therefore, in the influence of molar mass and in structural changes in the films.

Dynamic Combinatorial Chemistry (DCC) is a recently introduced supramolecular approach to generate dynamically interchanging libraries of compounds. These libraries are made of different building blocks that reversibly interact with one another and spontaneously assemble to encompass all possible combinations. If a target molecule, for instance a receptor is added to the system and one or more molecules show affinity to the target species, these compounds will, according to Le Châtelier´s principle, be amplified on the expense of the other non-bonding constituents. To date, only a handful of different systems and formats have been used. Hence, to further advance the technique, especially when biological systems are targeted, new reaction types and new screening methods are necessary. This thesis describes the development of reversible sulfur reactions, thiol/disulfide interchange and transthiolesterification (the latter being a new reaction type for DCC), as means of generating reversible covalent bond reactions. Two different types of target proteins are used, enzymes belonging to the hydrolase family and the plant lectin Concanavalin A. Furthermore, two new screening/analysis methods not previously used in DCC are also presented; the quartz crystal microbalance (QCM)-technique and catalytic self-screening. / QC 20101118

Post-combustion CO2 capture is a promising approach for complementing other strategies to mitigate climate change. Liquid absorption is currently used to capture CO2 from post-combustion flue gases. However, the high energy cost required to regenerate the liquid absorbents is a major drawback for this process. As a result, solid sorbents have been investigated extensively in recent years as alternative media to capture CO2 from flue gases. For example, metal organic frameworks (MOFs) are nanoporous materials that have high surface areas, large pore volumes, and flexible designs. A large number of MOFs, however, suffer from 1) low CO2 adsorption capacity at low pressure, which is the typical condition for flue gases, 2) degradation upon exposure to water present in flue gases, and 3) low selectivity of CO2 when present in a mixture of gases. Zeolitic Imidazolate Frameworks (ZIFs) are heavily investigated MOFs for CO2 sorption applications because they have better selectivity for CO2 compared to other MOFs and are resistant to degradation in water due to their hydrophobic nature. However, ZIFs (e.g., ZIF-8) investigated for CO2 sorption applications are typically produced using toxic solvents and their CO2 sorption capacity is drastically lower than other types of MOFs. Post-synthesis modifications with amine functional groups have been known to increase CO2 sorption capacity and selectivity within nanoporous materials. For ZIFs, previous research showed that sufficient loading with linear polyethyleneimine increased their CO2 sorption capacity. Therefore, the objectives of this research were to a) investigate the CO2 sorption capacity of ZIF-8 synthesized by solvothermal methods that use more eco-friendly solvents (e.g., methanol and water) and b) introduce post-synthetic modifications to ZIF-8 using branched polyethyleneimine (bPEI) to enhance its sorption capacity. A custom quartz crystal microbalance (QCM) system was assembled and used to measure the CO2 sorption capacity of unmodified and bPEI-modified ZIF-8 sorbent. The tests were conducted at 0.3 - 1 bar. The results showed that the unmodified ZIF-8 synthesized in methanol (ZIF-8-MeOH) had comparable crystal structure, thermal stability, surface area, and chemical properties to that of literature (Ta et.al 2018). ZIF-8-MeOH had a surface area of 1300 m2/g and a CO2 sorption capacity of 0.85 mmol CO2/g ZIF-8 @ 1 bar. This surface area and sorption capacity are comparable to those of ZIF-8 made in dimethylformamide (DMF). Therefore, ZIF-8-MeOH proved to be a worthy candidate MOF for replacing the ZIF-8 made in DMF for CO2 capture research. Water-based ZIF-8 was also synthesized in this study; however, its CO2 sorption capacity was not tested because it exhibited a significantly lower surface area (732 m2/g) compared to that of ZIF-8-MeOH. Modification of the ZIF-8-MeOH with bPEI resulted in a decrease in its CO2 sorption capacity. This undesired outcome is likely a result of insufficient bPEI load (mass attached), on ZIF-8-MeOH (~ 10% w/w) combined with the surface area lost (~ 770 m2/g) due to bPEI blocking some of the ZIF-8-MeOH pores. Therefore, the bPEI load attained in this study was not enough to compensate for the loss of surface area of the modified ZIF-8 and thus, the CO2 sorption capacity decreased. Future investigations should enhance the post-synthetic modification by increasing the loading of amine functional groups onto the eco-friendlier ZIF-8-MeOH used in this study.

As two of the most abundant natural polymers, chitin and lignin not only play critical roles in fungal and plant cell walls but are also important functional materials and promising feedstocks for a variety of chemicals. This study investigated the interactions of chitin and lignin thin films with several other molecules via a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). Interactions between chitin and family 18 chitinases are vital for understanding bacterial invasion of fungi and human defense against fungal infection. Regenerated chitin (RChitin) thin films were prepared via chemical conversion and spin-coating. Changes in their mass and viscoelasticity were monitored by a QCM-D in real time during incubation with family 18 chitinases. The optimal temperature for the activity of chitinases on surfaces was lower than bulk solution studies in the literature. Family 18 chitinases showed greater activity on dissolved chitin oligosaccharides while family 19 chitinases showed greater activity on RChitin films, which was attributed to chitin-binding domains in family 19 chitinases. Catechyl lignin (C-lignin) is a promising substrate for lignin valorization. Films of C-lignin were synthesized via adsorbed horseradish peroxidase-catalyzed dehydrogenative polymerization (DHP) of caffeyl alcohol (C-alcohol), and degraded through Fenton chemistry with all processes observed by a QCM-D and AFM. The synthetic rate and yield for C-DHP films was lower than DHP films made from coniferyl alcohol (G-alcohol) and p-coumaryl alcohol (H-alcohol). The C-DHP film underwent complete Fenton mediated degradation in contrast to the G-DHP and H-DHP films regardless of their thicknesses. Conventional lignin suffers from recalcitrance to degradation. Copolymer lignin films were synthesized through surface-initiated copolymerization of C and G or C, G and H monolignols. As the concentration of C-alcohol increased, the percentage degradation of the synthesized DHP copolymer films increased. Almost all the CG-DHP or CGH-DHP films were degraded when the percentage of the C-alcohol in the polymerization feed was ≥ 75% and ≥ 60% for CG-DHP and CGH-DHP, respectively. / Doctor of Philosophy / Natural polymers are widely considered as an alternative to fossil fuels for the production of biofuels, biochemicals, and biomaterials. The features of their biodegradability, biocompatibility, and sustainability can significantly alleviate concerns about environmental pollution and energy security. The surfaces of natural polymers are critical to their properties and applications. This dissertation focuses on the study of interfacial behaviors occurring at two of the most abundant natural polymers, chitin and lignin, via surface analysis techniques, a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). When an endosymbiont bacteria enter a fungal host, they secrete chitinases to soften and loosen the chitin layer in the fungal cell wall. Small chitin fragments will be released from digestion of the chitin layer of the fungal cell wall by chitinases in humans suffering from fungal infections. In order to fully understand the interactions between the fungal chitin layer and chitinases, a chitin thin film was fabricated to mimic the chitin layer, and the changes of the chitin film in mass, viscoelasticity, and morphology during treatment with family 18 chitinases were studied at various temperatures and pH using a QCM-D and AFM. Family 19 chitinases produced greater degradation of chitin thin films than family 18 chitinases, even though the family 18 chitinases had greater activity in solution. Greater surface activity for family 19 chitinases were attributed to chitin-binding domains in their chemical structure that are absent in family 18 chitinases. Millions of tons of lignin are produced in the lignocellulosic biorefinery and are discarded every year due to their recalcitrance to degradation as a result of their heterogeneous and complex structure. A newly discovered lignin, catechyl lignin (C-lignin), has potential for enhancing degradation on account of its simple linear structure. In this dissertation, C-lignin thin films were synthesized on gold-coated QCM-D sensor surfaces via surface-initiated dehydrogenative polymerization of caffeyl alcohol (C-alcohol). Their enzymatic and chemical degradation was investigated. It was found that the C-lignin films underwent complete chelator-mediated Fenton degradation in contrast to conventional lignin films. Although the C-lignin promises to be an ideal substrate for lignin valorization, its narrow distribution in nature severely limits its wide application. In view of this limitation, some people are trying to incorporate C units into conventional lignin through genetically engineered plants. This dissertation demonstrates the successful copolymerization of C-alcohol with conventional monolignols and the improved degradation of the synthesized C unit-containing copolymer lignin films relative to conventional lignin films. The results are expected to inform the design of lignocellulosic biomass for greater utilization.

Natural and synthetic polymers are highly related to people's daily life in every perspective and determine everyone's life quality. This study investigated the interactions between polymer thin films and other molecules, specifically natural polymer films with other components in plant and fungal cell walls, crosslinked thermoplastic films with solvent molecules, as well as commodity thermoplastic films with air and moisture during aging by a powerful surface analysis instrument, a quartz crystal microbalance with dissipation monitoring (QCM-D). The assembly and interactions of glucan and chitin are crucial for understanding the fungal infection mechanism. Adsorption of mixed-linkage glucan (MLG) onto regenerated chitin (RChitin) and cellulose (RC) surfaces were investigated by QCM-D and atomic force microscopy (AFM). MLG was irreversibly adsorbed onto both surfaces and formed soft hydrogel-like layers with viscoelastic properties. This work established a QCM-D method to mimic the assembly of natural polymers in fungal cell walls and provided insight into the interactions of these polymers with chitin and cellulose. Poly(ether imide) (PEI) has poor solvent resistance towards solvents including chloroform, dimethylformamide (DMF), dichloromethane (DCM), and N-methyl pyrrolidone (NMP). Exposure to these solvents severely affects the thermal and mechanical performances of PEI. Therefore, crosslinked PEI (X-PEI) films was prepared from azide-terminated PEI (N₃-PEI-N₃) via a thermal crosslinking reaction. X-PEIs maintain outstanding solvent resistance towards common solvents by swelling ratio tests using QCM-D. Meanwhile, the thermal and mechanical properties of X-PEI were enhanced compared to the original PEI. Photo-oxidation is one of the dominant degradation mechanisms affecting the lifespan of polymers. The effect of photooxidative aging on the physiochemical properties of low-density polyethylene (LDPE) films were investigated using QCM-D, differential scanning calorimetry (DSC), and tensile stress-strain tests. The crystallinity, mechanical properties, and weight loss were correlated to understand the aging behavior. Materials after aging showed higher tensile stress and modulus, with reduced mass and elongation properties. Particularly, the aging-induced damage of polymer chain integrity was first determined by QCM-D through the evolution of mass loss during aging, providing supports to the changes of mechanical properties under aging. / Doctor of Philosophy / Natural polymers and thermoplastics are two major materials that are highly related to modern life. The interactions of these polymers with other molecules are important research topics for people to understand and predict the material properties. This dissertation studied the following three topics using a quartz crystal microbalance with dissipation monitoring (QCM-D): 1) interactions between plant natural polymer films and polymers in fungal cell wall; 2) solvent resistance of crosslinked thermoplastic films; and 3) physiochemical changes during photo-oxidation degradation of thermoplastic films. Pathogenic fungal cells can attack beneficial plant cell hosts by adhering themselves onto the plant cells, followed by penetration and enzymatic degradation of the multilayered plant cell walls until the host is digested. Therefore, the interaction between the components in fungal and plant cell walls is critical to understand pathogenic fungal cell invasion. Adsorption of mixed-linkage glucan (MLG) onto regenerated chitin (RChitin) and cellulose (RC) surfaces was monitored by QCM-D and atomic force microscopy (AFM). An irreversible binding interaction of MLG with chitin and cellulose films and a soft hydrogel-like layer on both surfaces were observed in our work. Poly(ether imide) (PEI) is a high-performance polymer with excellent thermal and mechanical properties. However, the good solubilities in common organic solvents that facilitate reasonable processibility limits its applications in solvent-related domains. Several methods of PEI crosslinking were developed in the literature to improve solvent resistance. This study prepared crosslinked PEI (X-PEI) films from azide-terminated PEI (N₃-PEI-N₃) via a simple thermal crosslinking reaction. X-PEI had better resistance to organic solvents from QCM-D measurements and maintained good thermal and mechanical performances. Photo-oxidation from air and sunlight slowly degrades plastics, shortens their service time, and leads to environmental pollution. This work bridged the gap between molecular integrity and its effect on the overall macroscopic mechanical changes through accurate measurement of the mass loss during degradation using a QCM-D. This work is essential in ensuring polymer design and active environmental protection.