Compact and lightweight optical designs achieving acceptable image quality, field of view, eye clearance, eyebox size, operating across the visible spectrum, are the key to the success of next generation head-worn displays. The first part of this thesis reports on the design, fabrication, and analysis of off-axis magnifier designs. The first design is catadioptric and consists of two elements. The lens utilizes a diffractive optical element and the mirror has a free-form surface described with an x-y polynomial. A comparison of color correction between doublets and single layer diffractive optical elements in an eyepiece as a function of eye clearance is provided to justify the use of a diffractive optical element. The dual-element design has an 8 mm diameter eyebox, 15 mm eye clearance, 20 degree diagonal full field, and is designed to operate across the visible spectrum between 450-650 nm. 20% MTF at the Nyquist frequency with less than 3% distortion has been achieved in the dual-element head-worn display. An ideal solution for a head-worn display would be a single free-form surface mirror design. A single surface mirror does not have dispersion; therefore, color correction is not required. A single surface mirror can be made see-through by machining the appropriate surface shape on the opposite side to form a zero power shell. The second design consists of a single off-axis free-form mirror described with an x-y polynomial, which achieves a 3 mm diameter exit pupil, 15 mm eye relief, and a 24 degree diagonal full field of view. The second design achieves 10% MTF at the Nyquist frequency set by the pixel spacing of the VGA microdisplay with less than 3% distortion. Both designs have been fabricated using diamond turning techniques. Finally, this thesis addresses the question of what is the optimal surface shape for a single mirror constrained in an off-axis magnifier configuration with multiple fields? Typical optical surfaces implemented in raytrace codes today are functions mapping two dimensional vectors to real numbers. The majority of optical designs to-date have relied on conic sections and polynomials as the functions of choice. The choice of conic sections is justified since conic sections are stigmatic surfaces under certain imaging geometries. The choice of polynomials from the point of view of surface description can be challenged. A polynomial surface description may link a designer s understanding of the wavefront aberrations and the surface description. The limitations of using multivariate polynomials are described by a theorem due to Mairhuber and Curtis from approximation theory. This thesis proposes and applies radial basis functions to represent free-form optical surfaces as an alternative to multivariate polynomials. We compare the polynomial descriptions to radial basis functions using the MTF criteria. The benefits of using radial basis functions for surface description are summarized in the context of specific head-worn displays. The benefits include, for example, the performance increase measured by the MTF, or the ability to increase the field of view or pupil size. Even though Zernike polynomials are a complete and orthogonal set of basis over the unit circle and they can be orthogonalized for rectangular or hexagonal pupils using Gram-Schmidt, taking practical considerations into account, such as optimization time and the maximum number of variables available in current raytrace codes, for the specific case of the single off-axis magnifier with a 3 mm pupil, 15 mm eye relief, 24 degree diagonal full field of view, we found the Gaussian radial basis functions to yield a 20% gain in the average MTF at 17 field points compared to a Zernike (using 66 terms) and an x-y polynomial up to and including 10th order. The linear combination of radial basis function representation is not limited to circular apertures. Visualization tools such as field map plots provided by nodal aberration theory have been applied during the analysis of the off-axis systems discussed in this thesis. Full-field displays are used to establish node locations within the field of view for the dual-element head-worn display. The judicious separation of the nodes along the x-direction in the field of view results in well-behaved MTF plots. This is in contrast to an expectation of achieving better performance through restoring symmetry via collapsing the nodes to yield field-quadratic astigmatism.

Yes / Metamodelling or surrogate modelling techniques are frequently used across the engineering disciplines in conjunction with expensive simulation models or physical experiments. With the proliferation of metamodeling techniques developed to provide enhanced performance for specific problems, and the wide availability of a diverse choice of tools in engineering software packages, the engineering task of selecting a robust metamodeling technique for practical problems is still a challenge. This research introduces a framework for describing the typology of engineering problems, in terms of dimensionality and complexity, and the modelling conditions, reflecting the noisiness of the signals and the affordability of sample sizes, and on this basis presents a systematic evaluation of the performance of frequently used metamodeling techniques. A set of metamodeling techniques, selected based on their reported use for engineering problems (i.e. Polynomial, Radial Basis Function, and Kriging), were systematically evaluated in terms of accuracy and robustness against a carefully assembled set of 18 test functions covering different types of problems, sampling conditions and noise conditions. A set of four real-world engineering case studies covering both computer simulation and physical experiments were also analysed as validation tests for the proposed guidelines. The main conclusions drawn from the study are that Kriging model with Matérn 5/2 correlation function performs consistently well across different problem types with smooth (i.e. not noisy) data, while Kriging model with Matérn 3/2 correlation function provides robust performance under noisy conditions, except for the very high noise conditions, where the Kriging model with nugget appears to provide better models. These results provide engineering practitioners with a guide for the choice of a metamodeling technique for problem types and modelling conditions represented in the study, whereas the evaluation framework and benchmarking problems set will be useful for researchers conducting similar studies.

Made available in DSpace on 2016-12-23T14:08:15Z (GMT). No. of bitstreams: 1 Atila Lupim Cruz.pdf: 1394501 bytes, checksum: 0954b2c5b1fdcb864ee81cef7d14e9e5 (MD5) Previous issue date: 2012-10-19 / A pesquisa envolvida na presente dissertação se baseou no uso de funções de base radial para gerar uma nova formulação integral, que interpola diretamente o termo não homogêneo da equação diferencial de governo, no contexto do Método dos Elementos de Contorno (MEC). Emprega-se o uso de funções primitivas das funções de interpolação originais no núcleo da integral de domínio, permitindo a transformação desta última numa integral de contorno, evitando assim a discretização do domínio por meio de células, semelhante ao realizado na Dupla Reciprocidade. Para melhor avaliação das potencialidades da formulação, os testes numéricos apresentados abordaram apenas a solução de problemas governados pela Equação de Poisson. Os problemas escolhidos dentro desta categoria possuem solução analítica, o que permitiu aferir com mais rigor a precisão dos resultados. Para melhor balizamento da eficiência da formulação proposta, todos os problemas abordados também foram resolvidos pela formulação com Dupla Reciprocidade. O custo computacional dispendido para cada uma dessas formulações também foi comparado. Para ambas as formulações também foram testados esquemas de ajuste da interpolação realizada, visando avaliar seus efeitos na precisão dos resultados e também propositando obter economia computacional em futuras aplicações em simulações na área de propagações de ondas / This research was based on the use of radial basis functions to generate a new integral formulation that interpolates directly the domain action, related to the inhomogeneous term of the governing differential equation, using the Boundary Element Method (BEM). The use of primitive functions of the original interpolation functions in the kernel of the inhomogeneous integral is proposed, allowing its transformation into a boundary integral, thus avoiding the domain discretization through cells, similar to that conducted in the Dual Reciprocity. To better evaluation of the capability of the proposed formulation, the numerical tests presented only solved problems governed by the Poisson Equation. Test problems chosen have known analytical solution, which allowed a better evaluation of the numerical accuracy. To better check the efficiency of the proposed formulation, all the problems were also solved by the Dual Reciprocity Boundary Element Formulation. The computational cost expended for each of these formulations was also compared. Fitting interpolation schemes for both formulations were also tested in order to evaluate their effects on the accuracy of the results and also looking for economy in future computational applications related to wave propagation problems

In this work, a numerical approach based on meshless methods is proposed to obtain eigenmodes of Laplace-Beltrami operator on manifolds, and its performance is compared against existing alternative methods. Radial Basis Function (RBF)-based methods allow one to obtain interpolation and differentiation matrices easily by using scattered data points. We derive expressions for such matrices for the Laplace-Beltrami operator via so-called Reilly’s formulas and use them to solve the respective eigenvalue problem. Numerical studies of proposed methods are performed in order to demonstrate convergence on simple examples of one-dimensional curves and two-dimensional surfaces.

In this paper, we use the newly developed method of particular solution (MPS) and one-stage method of fundamental solution (MFS-MPS) for solving partial differential equation (PDE). In the 1-D Poisson equation, we prove the solution of MFS-MPS is converge to Spectral Collocation Method using Polynomial, and show that the numerical solution similar to those of using the method of particular solution (MPS), Kansa's method, and Spectral Collocation Method using Polynomial (SCMP). In 2-D, we also test these results for the Poisson equation and find the error behaviors.

Made available in DSpace on 2014-12-17T14:56:03Z (GMT). No. of bitstreams: 1 OsmarADJ.pdf: 1159660 bytes, checksum: 65307a903dfe1a1f71297194d1c7e2a5 (MD5) Previous issue date: 2004-12-22 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / This dissertation presents a new proposal for the Direction of Arrival (DOA) detection problem for more than one signal inciding simultaneously on an antennas array with linear or planar geometry by using intelligent algorithms. The DOA estimator is developed by using techniques of Conventional Beam-forming (CBF), Blind Source Separation (BSS), and the neural estimator MRBF (Modular Structure of Radial Basis Functions). The developed MRBF estimator has its capacity extended due to the interaction with the BSS technique. The BSS makes an estimation of the steering vectors of the multiple plane waves that reach the array in the same frequency, that means, obtains to separate mixed signals without information a priori. The technique developed in this work makes possible to identify the multiple sources directions and to identify and to exclude interference sources / Esta disserta??o apresenta uma nova proposta para os problemas de detec??o de dire??o de chegada para mais de um sinal incidindo simultaneamente sobre um arranjo de antenas de geometria planar ou linear empregando algoritmos inteligentes. O estimador de DOA ? desenvolvido utilizando as t?cnicas de Conforma??o de Feixes Digital Convencional (CBF - Conventional Beamforming), de Separa??o Cega de Fontes (BSS {Blind Source Separation) e o estimador neural MRBF (Modular Structure of Radial Basis Functions). O estimador MRBF desenvolvido tem sua capacidade ampliada gra?as ?a intera??o com a t?cnica BSS, a qual faz uma estima??o dos vetores de guiamento das m?ltiplas ondas planas que alcan?am o arranjo na mesma freq??ncia, isto ?, consegue separar sinais misturados sem informa??es a priori. A t?cnica desenvolvida neste trabalho possibilita identificar a dire??o de m?ltiplas fontes e identificar e excluir as fontes de interfer?ncia

Microsized hexagonal gallium nitride pyramids show promise as next generation Light Emitting Diodes (LEDs) due to certain quantum properties within the pyramids. One metric for evaluating the efficiency of a LED device is by studying its Light Extraction Efficiency (LEE). To calculate the LEE for different pyramid designs, simulations can be performed using the FDTD method. Maximizing the LEE is treated as a black-box optimization problem with an interpolation method that utilizes radial basis functions. A simple heuristic is implemented and tested for various pyramid parameters. The LEE is shown to be highly dependent on the pyramid size, the source position and the polarization. Under certain circumstances, a LEE over 17% is found above the pyramid. The results are however in some situations very sensitive to the simulation parameters, leading to results not converging properly. Establishing convergence for all simulation evaluations must be done with further care. The results imply a high LEE for the pyramids is possible, which motivates the need for further research.

In this paper the obstacle description with Radial Basis Functions for contact problems in three dimensional elasticity will be done. A short Introduction of the idea of Radial Basis Functions will be followed by the usage of Radial Basis Functions for approximation of isosurfaces. Then these isosurfaces are used for the obstacle-description in three dimensional elasticity contact problems. In the last part some computational examples will be shown.

Model-based black-box optimization is a topic that has been intensively studied both in academia and industry. Especially real-world optimization tasks are often characterized by expensive or time-demanding objective functions for which statistical models can save resources or speed-up the optimization. Each of three parts of the thesis concerns one such model: first, copulas are used instead of a graphical model in estimation of distribution algorithms, second, RBF networks serve as surrogate models in mixed-variable genetic algorithms, and third, Gaussian processes are employed in Bayesian optimization algorithms as a sampling model and in the Covariance matrix adaptation Evolutionary strategy (CMA-ES) as a surrogate model. The last combination, described in the core part of the thesis, resulted in the Doubly trained surrogate CMA-ES (DTS-CMA-ES). This algorithm uses the uncertainty prediction of a Gaussian process for selecting only a part of the CMA-ES population for evaluation with the expensive objective function while the mean prediction is used for the rest. The DTS-CMA-ES improves upon the state-of-the-art surrogate continuous optimizers in several benchmark tests.

This thesis explores the application of Radial Basis Functions (RBFs) to fluid dynamical problems. In particular, stationary Stokes and Navier-Stokes equations are solved using RBF collocation method. An existing approach from the literature, is enchanced by an additional polynomial basis and a new preconditioner. A faster method based on the partition of unity is introduced for stationary Stokes equations. Finally, a global method based on Picard linearization is introduced for stationary Navier-Stokes equations. / Denna avhandling utforskar tillämpningen av Radial Basis Functions (RBF) på dynamiska problem med vätskor. I synnerhet löses stationära Stokes och Navier-Stokes ekvationer lösas med hjälp av RBF-samlokaliseringsmetoden. En befintlig metod från litteraturen, förbättras genom en ytterligare polynombas och en ny förkonditionering. En snabbare metod baserad på enhetens partition introduceras för stationära Stokes-ekvationer. Slutligen introduceras en global metod baserad på Picard linjärisering för stationära Navier-Stokes ekvationer.