The current work focuses on three aspects of laser formed Ti-6Al-4V: an evaluation of the as-deposited and heat treated macro and microstructures and preliminary results obtained from a model developed to calculate the temperature profile resultant of the laser forming process. A "solution treat and age" heat treatment with a variable cooling rate was performed on the Laser Formed Ti-6Al-4V single line builds. Increasing the cooling rate decreases the acicular alpha grain size in the basketweave Widmanstätten alpha plus untransformed beta microstructure. Distinct features of the as-deposited macrostructure include: large columnar prior-beta grains that have grown epitaxially through multiple deposited layers; a well defined heat affected zone in the substrate; and the presence of "layer bands," a macroscopic banding present at the top of every layer except for the last three layers to be deposited. The nominal microstructure between the layer bands consists of acicular basketweave Widmanstätten alpha outlined in untransformed beta. The alpha grain width is smaller just above a layer band and larger just below a layer band. The microstructure of the layer band consists of larger colonies of acicular alpha outlined in untransformed beta. The gradient in the alpha grain size and presence of the layer band is due to thermal cycling as opposed to segregation effects which were ruled out using quantitative compositional analyses. Through analysis of the microstructural results the gradient in the nominal microstructure and formation of the layer band in layer n was caused by the deposition of layer n+2, and n+3, respectively. A thermal model has been developed to assist in the prediction and interpretation of the as-processed microstructure. The model is used to explain that the microstructural evolution of the layer bands and gradient microstructure in layer n is due to the deposition of layer n+2. The difference in the two analyses of microstructural evolution based on microstructural observations and thermal model results are due to differences in the parameter sets used to build and model the deposit. / Master of Science

Published Article / This paper surveys the current state and capabilities of Three Dimensional Printing (3DP). Based on its technical background - the ink jet printing as known from the printer and plotter industry - a classification structure has been developed and proposed. Different printing techniques and process concepts, together with their advantages and limitations are described and analysed. A large variety of manufacturing applications such as rapid pattern making and rapid tooling using the 3DP process directly or as core technology, as well as further implications in design and engineering analysis, medicine, and architecture are presented and evaluated. Some research issues are also discussed. An attempt, based on the state of the art, to show weaknesses and opportunities, and to draw conclusions about the future of this important process wraps up this paper.

Published Article / Until recently solid freeform fabrication (SFF) technology has been used mostly for production of prototype parts. However, as this technology matures, the initiative of utilising it for the manufacture of end-use products is establishing itself. As this tendency to use SFF for actual production runs increases, a demand is developing for sets of process-specific design for manufacture (DFM) guidelines that will assist designers who are designing parts for manufacture by a specific rapid manufacturing (RM) process. The purpose of this paper is to provideRMdesigners with such a series of processspecific design for manufacture guidelines.

Published Article / Selective laser micro-welding (SLMW) is a recent rapid manufacturing technique that produces metal parts through the use of a laser beam that selectively scans over the powder layers and fully melts and micro-welds the metallic particles. The advantage of SLMW is that any type of commercial steel alloys or other metal powders can be used to build parts in a single step without the need to add low melting point additives to join the particles as in the former SLS process. In this study, two types of low cost general purpose powders were evaluated as the raw materials for the selective laser micro-welding (SLMW): one powder is AISI304 stainless steel powder from Hoganas, Belgium (cost = $11/kg) and the other isAISI100510w carbon steel locally produced in-house from scrap steel using gas atomizing then de-oxidizing techniques (cost = $1.2/kg). Twelve sample parts were fabricated using two different laser speeds, 70 and 100 mm/s. Dimensions, density, hardness, tensile and microstructure properties were evaluated. Results showed that both powders successfully produced complete parts with accurate dimensions and fine details. Both microstructure phases were austenite due to the rapid heating and cooling cycles. At the higher speed of 100 mm/s mechanical properties deteriorated because of the porosities inside the structure. Using low cost powders gives more potential for the SLMW to spread as an economical manufacturing process in the near future.

Published Article / Rapid Manufacturing (RM) has emerged over the past few years as a potential technology to successfully produce patient-specific implants for maxilla/facial and cranial reconstructive surgeries. However, in the area of spinal implants, customization has not yet come to the forefront and with growing capabilities in both software and manufacturing technologies, these opportunities need to be investigated and developed wherever possible. The possibility of using Computed Tomography (CT) and Rapid Manufacturing (RM) technologies to design and manufacture a customized, patient-specific intervertebral implant, is investigated. Customized implants could aid in the efforts to reduce the risk of implant subsidence, which is a concern with existing standard implants. This article investigates how accurately the geometry of a customized artificial intervertebral disc (CAID) can represent the inverse geometry of a patient's vertebral endplates. The results indicate that the endplates of a customized disc implant can be manufactured to a calculated average error of 0.01mm within a confidence interval of 0.022mm, with 95% confidence, when using Direct Metal Laser Sintering.

Additive Manufacturing (AM) refers to the use of a group of technologies capable of combining material layer-by-layer to manufacture geometrically complex products in a single digitally controlled process step, entirely without moulds, dies or other tooling. AM is a parallel manufacturing approach, allowing the contemporaneous production of multiple, potentially unrelated, components or products. This thesis contributes to the understanding of the economic aspects of additive technology usage through an analysis of the effect of AM s parallel nature on economic and environmental performance measurement. Further, this work assesses AM s ability to efficiently create complex components or products. To do so, this thesis applies a methodology for the quantitative analysis of the shape complexity of AM output. Moreover, this thesis develops and applies a methodology for the combined estimation of build time, process energy flows and financial costs. A key challenge met by this estimation technique is that results are derived on the basis of technically efficient AM operation. Results indicate that, at least for the technology variant Electron Beam Melting, shape complexity may be realised at zero marginal energy consumption and cost. Further, the combined estimator of build time, energy consumption and cost suggests t AM process efficiency is independent of production volume. Rather, this thesis argues that the key to efficient AM operation lies in the user s ability to exhaust the available build space.

Este trabalho avaliou a aplicação das tecnologias de prototipagem rápida por Impressão 3D e FDM (Fused Deposition Modeling) na produção de moldes rápidos. Esta avaliação foi feita com base nas qualidades das peças obtidas por vazamento nos moldes produzidos, bem como nas limitações encontradas em suas utilizações. Foram estabelecidas as principais diferenças do ponto de vista de qualidade, custos, tempos gastos e praticidade. Foram construídos moldes para peças que contemplando vários graus de dificuldades. Para cada ferramental foram obtidos lotes de peças, através dos quais foram analisadas e comparadas as qualidades dos protótipos. / This work evaluated the application of the Rapid Prototyping technologies 3D printer and FDM (Fused Deposition Modeling) in the rapid manufacturing of molds. This evaluation is based on the quality of the parts molded, as well as in the limitations found in the molds applications. As result the main differences related to quality, and usability was established. The molds produced parts with different degrees of geometric difficulties. For each mold, a few prototypes were produced and their qualities compared.

The purpose of this study was to investigate the implications of additive manufacturing on industrial design profession and designers through an explorative study. Through a literature survey, implications of additive manufacturing technologies on industrial designers and industrial design profession were explored. Expanding literature survey with on-line searches, several experimental and commercial application examples of rapid manufacturing of products were identified. These identified examples were then used for a qualitative evaluation on the implications of additive manufacturing for the industrial design profession and designers through semi-structured interviews conducted with seven professional industrial designers having experience with rapid manufacturing in Istanbul Turkey. The research concluded with significant implications of additive manufacturing having the potential to cause paradigm shifts in industrial designer&rsquo / s role, definition of the profession and design process. The conclusions derived include suggestions to exploit the potential brought by these technologies and their applications.

Customized cellular material is a relatively new area made possible by advancements in rapid manufacturing technologies. Rapid manufacturing is ideal for the production of customized cellular structure, especially on the meso scale, due to the size and complexity of the design. The means to produce this type of structure now exist, but the processes to design the structure are not well developed. The manual design of customized cellular material is not realistic due to the large number of features. Currently there are few tools available that aid in the design of this type of material. In this thesis, an automated tool to design customized cellular structure is presented.

Användningen och intresset för additiv tillverkning (AM) har ökat markant de senaste åren och det finns en teori kring att tillverkningsmetoden kan vara det nästa steget i den industriella revolutionen. Eftersom AM fortfarande befinner sig i utvecklingsstatidet går det att anta att tekniken ännu inte uppnått sin fulla potential och att det kan komma att finnas möjligheter att implementera tekniken i fler branscher och företag. Detta skulle innebära en bredare marknad för AM. Syftet med examensarbetet var att undersöka vilka möjligheter och hinder som finns för ökad användning av AM i Sverige. Studien genomfördes genom kvalitativa intervjuer med åtta olika verksamheter tillhörande den svenska industrin och en litteraturgenomgång för att presentera nuläget för AM i svensk industriell marknad. Resultatet av datainsamlingen analyserades med modellerna PEST, 4P och slutligen SWOT. De fördelar som har setts med användningen av AM har varit minskade ledtider, minskade kostnader för tillverkning av produkter och verktyg, minskat materialspill och en optimal designprocess med ökad kreativitet. De begränsningar som finns i tekniken i dagsläget är att priset för material och maskiner är dyrt. Vidare anses även kvalitet på slutdetalj, begränsad byggvolym och opålitliga processer vara problematiska. De möjligheter som finns beror huvudsakligen på den forskning som görs. Förutsättningarna för AM i svensk industri kommer att bero på hur tekniken kommer att utvecklas. De hinder som finns är kopplat till kompetensbrist och att det inte finns befintliga standarder för material eller process inom AM. / Within the industrial sector, an increased interest and usage of Additive Manufacturing (AM) throughout the decade has been formed. The layer-upon-layer building technology has been seen and recognized as one of the next industrial revolutionizing methods of production. As the technology is still in the trending and uprising phase it should be considered that its full potential has not yet been achieved, as large opportunities for implementation of AM exist and that new companies and markets have a growing interest in this technology. Through this study a market research was conducted to identify and present what opportunities and obstacles there are for an increased usage of AM in Sweden. A literature study on the Swedish market has been made to present the market as of today. Eight qualitative interviews have also been conducted with companies within the industrial sector to identify the areas of use within AM for production. The concepts and models used to analyze these questions was PEST, Marketing Mix and SWOT. The concluded results for advantages in using AM are shortened lead times, reduced costs of production of components and tools, reduced material waste and optimization of design processes with increased creativity. The concluded challenges are expensive materials and machine, the quality of finished components, limited printing volume due to the 3D-printers and reliability of printing processes. The finalized opportunities that are presented in this work are that AM is dependent on how much research on the subject and factors around it is done. How AM will be applied in the coming future revolves around the advancement in the technology. The obstacles that are found in this study are lack of competence and lack of standard for materials and processes within AM.