Spelling suggestions: "subject:"rapid freezing"" "subject:"vapid freezing""
1 |
The effect of high hydrostatic pressure on whey protein functionalityMcCreedy, Richard William January 1998 (has links)
No description available.
|
2 |
Inhaled voriconazole formulations for invasive fungal infections in the lungsBeinborn, Nicole Angela 02 July 2013 (has links)
Attention has begun to focus on the pulmonary delivery of antifungal agents for invasive fungal infections as inhalation of the fungal spores is often the initial step in the pathogenesis of many of these infections. Invasive fungal infection in the lungs in immunocompromised patients has high mortality rates despite current systemic (oral or intravenous) therapies. However, drug delivery of antifungal agents directly to the lungs could potentially result in high concentrations of drug in the lungs, a quicker onset of action, and reduction of systemic side effects. Voriconazole (VRC) is a second, generation triazole antifungal agent with increased potency, a broad spectrum of antifungal activity, and a fairly poor aqueous solubility. It is the recommended therapeutic agent for the treatment of Invasive Pulmonary Aspergillosis (IPA), and its use has improved therapeutic outcomes in immunocompromised patients with IPA. Still, systemic administration by oral or intravenous delivery is limited by high inter- and intra-patient pharmacokinetic variability, many potential drug interactions, and a narrow therapeutic index with many adverse effects, leading to clinical failures. Therefore, development of novel particulate formulations containing VRC for targeted drug delivery to the lungs is critical to improving therapeutic outcomes in patients with invasive fungal infections in the lungs. Within the framework of this dissertation, two particle engineering processes, thin film freezing (TFF) and advanced evaporative precipitation into aqueous solution (AEPAS), were investigated. The goal was to investigate microcrystalline VRC, nanocrystalline VRC, and nanostructured amorphous VRC formulations suitable for pulmonary delivery and to determine the effect of morphology on the in vivo deposition and distribution of inhaled particulate VRC formulations. TFF process parameters significantly affected the solid state properties and aerodynamic performance of the dry powder formulations containing VRC. Following dry powder insufflation into the lungs of mice, microstructured crystalline TFF-VRC achieved higher and more prolonged concentrations of VRC in the lungs with slightly lower systemic bioavailability than nanostructured amorphous TFF-VRC-PVP K25. AEPAS and TFF of template nanoemulsions did not lead to production of crystalline nanoparticles, as predicted. In particular, VRC proved to be a difficult molecule to stabilize in the nanocrystalline and nanostructured amorphous states. Ultimately, this body of work demonstrated that the particle engineering process, TFF, could be used to develop voriconazole formulations suitable for dry powder inhalation with more favorable pharmacokinetic parameters compared to inhaled voriconazole solution. / text
|
3 |
Improvement in the bioavailability of poorly water-soluble drugs via pulmonary delivery of nanoparticlesYang, Wei 23 October 2009 (has links)
High throughput screening techniques that are routinely used in modern drug
discovery processes result in a higher prevalence of poorly water-soluble drugs. Such
drugs often have poor bioavailability issues due to their poor dissolution and/or
permeability to achieve sufficient and consistent systemic exposure, resulting in sub-optimal
therapeutic efficacies, particularly via oral administration. Alternative
formulations and delivery routes are demanded to improve their bioavailability.
Nanoparticulate formulations of poorly water-soluble drugs offer improved dissolution
profiles. The physiology of the lung makes it an ideal target for non-invasive local and
systemic drug delivery for poorly water-soluble drugs.
In Chapter 2, a particle engineering process ultra-rapid freezing (URF) was
utilized to produce nanostructured aggregates of itraconazole (ITZ), a BCS class II drug, for pulmonary delivery with approved biocompatible excipients. The obtained
formulation, ITZ:mannitol:lecithin (1:0.5:0.2, w/w), i.e. URF-ITZ, was a solid solution
with high surface area and ability to achieve high magnitude of supersaturation. An
aqueous colloidal dispersion of URF-ITZ was suitable for nebulization, which
demonstrated optimal aerodynamic properties for deep lung delivery and high lung and
systemic ITZ levels when inhaled by mice.
The significantly improved systemic bioavailability of inhaled URF-ITZ was
mainly ascribed to the amorphous morphology that raised the drug solubility. The effect
of supersaturation of amorphous URF-ITZ relative to nanocrystalline ITZ on
bioavailability following inhalation was evaluated in Chapter 3. The nanoparticulate
amorphous ITZ composition resulted in a significantly higher systemic bioavailability
than for the nanocrystalline ITZ composition, as a result of the higher supersaturation that
increased the permeation.
In Chapter 4, pharmacokinetics of inhaled nebulized aerosols of solubilized ITZ
in solution versus nanoparticulate URF-ITZ colloidal dispersion were investigated, under
the hypothesis that solubilized ITZ can be absorbed faster through mucosal membrane
than the nanoparticulate ITZ. Despite similar ITZ lung deposition, the inhaled solubilized
ITZ demonstrated significantly faster systemic absorption across lung epithelium relative
to nanoparticulate ITZ in mice, due in part to the elimination of the phase-to-phase transition of nanoparticulate ITZ. / text
|
4 |
Caractérisation de nanoparticules en milieux complexes : Applications à des nanoparticules organiques et métalliques / Characterization of nanoparticles in sensitive media : Application to organic and metallic nanoparticlesArnould, Amandine 20 December 2018 (has links)
L'utilisation massive des nanomatériaux pose de réels enjeux sanitaires et environnementaux. C'est pourquoi ils sont désormais soumis à une réglementation qui prévoit une traçabilité de ceux-ci depuis leur fabrication jusqu'à leur distribution et l'établissement d'une fiche d'identité de la substance (composition, taille, état d'agglomération, forme, etc.). Une routine de caractérisation de nanoparticules en suspension a ainsi été développée. La Microscopie Électronique en Transmission (MET) a permis d'établir une majorité des paramètres de la fiche d'identité, en combinant à la fois imagerie et spectroscopie (analyses chimiques). La préparation, dont dépendra la qualité des observations, nécessite un développement pour chaque matériau analysé. Pour cela, trois techniques ont été mises au point : le dépôt en voie sèche qui permet une observation directe et simple, la cryogénie qui permet de fixer l'état de la suspension et l'in-situ liquide qui permet d'observer directement la suspension sans changement d'état. Les analyses MET étant locales, une comparaison avec des techniques indirectes a été effectuée par Diffusion Statique (MALS) et Dynamique (DLS) de la Lumière avec et sans fractionnement par couplage flux-force (FFF). Deux matériaux modèles ont été choisis. Le premier est une nanoémulsion de lipides stabilisés par des surfactants, servant de vecteurs à des principes actifs. Une étude de vieillissement par interaction avec des protéines a été menée et de légères variations de taille ont été obtenues. Le second matériau sélectionné est une poudre de nanoparticules de dioxyde de titane, remises en suspension, utilisée dans les crèmes solaires en tant que filtres UV. Ces particules ont été observées avant et après passage en enceinte climatique afin d'observer les effets des rayons UV sur celles-ci. Ceci a confirmé la stabilité des particules. Les protocoles de caractérisation développés au cours de cette thèse peuvent ainsi servir de supports à l'étude d'autres nanoparticules en suspension. / The extensive use of nanomaterials has raised awareness about health issues and their fate in the environment. That is why they are now subject to regulation that has imposed their traceability from their manufacturing to their distribution as the establishment of their characteristics (chemical composition, size, agglomeration state, shape ...). A characterization routine for nanoparticles in suspension was developed. Transmission Electron Microscopy (TEM) fulfills most of the criteria cited before by combining imaging and spectroscopy techniques. Three sample preparation methods were optimized to ensure high quality results : a dry process, rapid freezing to vitrify the sample and the use of an textit{in-situ} liquid TEM holder to prevent any preparation artefact (no phase change). To obtain quantitative analysis, a comparison was made between Dynamic Light Scattering (DLS), Multi-Angle Light Scattering (MALS), with and without a fractionation system (AF4), and TEM. To support this work, two nanomaterials were analyzed. The first one is a nanoemulsion composed of lipid nanoparticles stabilized by surfactants used as nanocarriers for drug delivery. Their stability after protein interaction was investigate and some size variations were observed. The second material is a powder composed of titanium dioxide nanoparticles used as UV filters in sunscreens. These nanoparticles were analyzed before and after interaction with UV radiation in a climatic chamber to confirm their stability. The different protocols developed in this PhD may be used for the analysis of other nanomaterials.
|
5 |
Nanoparticle formulations of poorly water soluble drugs and their action in vivo and in vitroPurvis, Troy Powell 01 February 2011 (has links)
Poorly water soluble drugs have been manipulated to make them more soluble, increasing the bioavailability of these drugs. Several cryogenic processes allow for production of drug nanoparticles, without mechanical stress that could cause degradation. The Ultra Rapid Freezing (URF) process is a technique which improves water solubility of drugs by reducing primary drug particle size by producing amorphous solid dispersions. Heat conduction is improved, using a cryogenic material with a high thermal conductivity relative to the solution being frozen to maintain the surface temperature and heat transfer rate while the solution is being frozen. With URF technology, the freezing rate is fixed, which drives the particle formation and determines its characteristics. Supersaturation of drug in aqueous solution can allow for better absorption of the drug via the oral and pulmonary routes. Drug formulations that supersaturate the dissolution media show the possibility for increased bioavailability from an amorphous drug form. If the concentration of drug in solution is significantly increased, higher chemical potential will lead to an increase in flux across an exposed membrane, leading to higher blood levels for an amorphous drug, compared to an identical crystalline formulation. During oral delivery, supersaturated drug concentrations would also saturate PGP efflux sites in the gut lumen, increasing the drug's bioavailability. Saturated PGP sites show zero order efflux kinetics, so increasing the drug concentration in supersaturated biological fluid will increase serum drug levels. High supersaturation levels maintained for prolonged periods would have a beneficial effect on a drug's absolute bioavailability. Pulmonary administration offers therapeutic advantages over more invasive routes of administration. Limited amount of metabolizing enzymes like CYP 3A4 in lung tissue along with avoidance of first pass metabolism are advantages to pulmonary delivery. The objective of the research presented in this dissertation is to show the versatility of nanoparticulate poorly water soluble drug formulations. Due to the reduced particle size and the URF manufacturing process, a wide range of applications can be used with these nanoparticles. Oral and pulmonary administration routes can be explored using nanoparticles, but in vitro cell culture testing can show clinical benefits from this type of processing technology. / text
|
Page generated in 0.0657 seconds