A low-cost plasmonic nanopillar array was synthesized using soft thermal nanoimprint lithography, and its sensitivity was determined through far-field spectroscopic measurements. Its transmission spectrum was highly dependent on the refractive index of the surrounding medium, with its sensitivity being 375 nm per refractive index unit according to the spectral shift. Moreover, a simple sensor whose reflected color changed with a change in the plasma frequency on varying the surrounding medium was fabricated.

The availability of spatial light modulators as standard turnkey components and their ongoing development makes them attractive for a huge variety of optical measurement systems in industry and research. Here, we outline two examples of how optical measurements can benefit from spatial light modulators. Ultrasound testing has become an indispensable tool for industrial inspection. Contact-free measurements can be achieved by laser-induced ultrasound. One disadvantage is that due to the highly divergent sound field of the generated shear waves for a point-wise thermoelastic excitation, only a poor spatial selectivity can be achieved. This problem can be solved by creating an ultrasound focus by means of a ring-like laser intensity distribution, but standard fixed-form optical components used for their generation are always optimised to a fixed set of parameters. Here, we demonstrate, how a predefined intensity pattern as e.g. a ring can be created from an arbitrary input laser beam using a phase-retrieval algorithm to shape an ultrasound focus in the sample. By displaying different patterns on the spatial light modulator, the focus can be traversed in all three directions through the object allowing a fast and highly spatially resolving scanning of the sample. Optical measurements take often place under difficult conditions. They are affected by variations of the refractive index, caused e.g. by phase boundaries between two media of different optical density. This will result in an increased measurement uncertainty or, in the worst case, will cause the measurement to fail. To overcome these limitations, we propose the application of adaptive optics. Optical flow velocity measurements based on image correlation in water that are performed through optical distortions are discussed. We demonstrate how the measurement error induced by refractive index variations can be reduced if a spatial light modulator is used in the measurement setup to compensate for the wavefront distortions.

Homopolymers and copolymers produced from aromatic based methacrylates, acrylates, and dimethacrylates are excellent materials with many applications in dentistry, microelectronics, and optics, including optical eye wear, fiber optics, and non-linear optics, such as holography. Carbazole based polymers have demonstrated good optical, photo-refractive, and charge-transporting properties, combined with ease of processing. The objective of this research was to design, synthesize, and characterize high refractive index polymers and copolymers for use in optical spectacle lenses of eyeglasses. Additionally, other interesting attributes were observed for selected carbazole based polymers, such as high thermal stability and birefringence, which could lend these materials to other uses, such as non-linear optics and electronic data storage. A family of novel, high refractive index homopolymers and copolymers were synthesized by incorporating carbazole, along with other aromatic substituents, into methacrylates, acrylates, and dimethacrylates. Subsequent free radical polymerizations provided for high refractive index materials well suited for lightweight optical spectacles and other applications. The refractive index of materials can be increased by increasing the polarizability of substituent groups. By incorporating oxygen, sulfur, or sulfoxide groups into polymers, high refractive index polymers have been attained. By reacting the phenol, aromatic diols, or aromatic thiols with 9-(2,3-epoxypropyl)-carbazole, the refractive index of the final polymer can be increased further. The reaction of the carbazole based intermediate with methacryloyl chloride or methacrylic anhydride eliminated any hydroxyl groups in the final methacrylate or dimethacrylate. Hydroxyl groups undergo intermolecular hydrogen bonding, which increases viscosity. The absence of hydrogen bonding in the final methacrylated monomers reduces viscosity, which is desirable for processing. Novel carbazole based monomers and polymers were characterized in terms of molecular composition and molecular weight, thermal properties, such as melting point, glass transition temperature, and decomposition, and in terms of optical properties, such as refractive index. The AIBN initiated carbazole-phenoxy based methacrylate polymerization was followed using in-situ FTIR, which showed the reaction to be completed within 40 minutes in DMAC at 90°C. Photo-DSC was used to determine the heat of polymerization (DHp) for the carbazole-phenoxy based methacrylate, which was found to be -39.4 kJ/mole. One and two dimensional 1H NMR was used to characterize the molecular structure of the carbazole-phenoxy based methacrylate monomer. The carbazole-phenoxy based methacrylate homopolymer had a surprisingly high decomposition temperature. 13C NMR spectroscopy experiments and molecular modeling were employed to explore the configuration of the polymerized carbazole-phenoxy based methacrylate. The lack of head-to-head linkages due to steric considerations could explain the higher thermal stability observed for the carbazole-phenoxy based methacrylate polymer. Refractive indices of these carbazole based methacrylates, acrylates, and dimethacrylate polymers ranged from 1.53 to 1.63. Statistical copolymers of carbazole based methacrylates with methyl methacrylate were also produced by solution polymerization in DMAC, and characterized. Using free radical polymerization techniques, homopolymers and copolymers of the carbazole functionalized methacrylates, acrylates, and dimethacrylates were readily obtained. This research demonstrated a variety of carbazole based chemistries which could produce controlled linear and cross-linked materials with high refractive index values and other interesting features. / Ph. D.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21732号 / 工博第4549号 / 新制||工||1709(附属図書館) / 京都大学大学院工学研究科電気工学専攻 / (主査)教授 大村 善治, 教授 松尾 哲司, 教授 竹内 繁樹 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

No description available.

This project evaluates the ability of terahertz (THz) radiation to differentiate cancerous from non-cancerous human breast lumpectomy and mastectomy tissue. This is done by aiming a narrow-band THz beam at medical samples and measuring reflected power. THz images of specimens from Breast Conservation Surgery (BCS) were created using a gas laser source and mechanical scanning. The design and characterization of this system is discussed in detail. The images were correlated with optical histological micrographs of the same specimens and discrimination values of more than 70% were found for five of the six samples using Receiver Operating Characteristic (ROC) analysis.

Koherent Diffraktionsavbildning med en intensiv röntgenpuls från en Frielektronlaser har möjliggjort strukturbestämning av isolerade nanopartiklar som inte går att studera med hjälp av konventionella metoder, så som elektronmikroskopi. En mycket kort pulslängd tillsammans med spridningssignalens beroende av objektets elektroniska struktur medför också möjligheten att studera inducerad ultrasnabb dynamik med denna teknik. I detta projekt studerades joniseringspåverkan av Xe hos Xe-Ar core-shell-nanokluster. Enligt teorin har neutral Xe lägre spridningstvärsnitt under dess 3d-resonans än det motsvarande för fotonenergier över 3d-resonansen. Därför var en hög kontrast i klustren förväntad vid energier över dess 3d-resonans. I stället observerades mörkare regioner liknande hål i rekonstruktioner från de experimentella resultaten vid energier över 3d-resonansen hos Xe. En möjlig förklaring var jonisering av neutral Xe. För att undersöka detta skapades 3D modeller av Xe-Ar nanokluster för att simulera den interaktionen mellan intensiva röntgenpulser och nanokluster. Diffraktionsmönstren som genererades med hjälp av 3D-modellerna användes sedan för att utföra Iterativ fasrekonstruktion och rekonstruera partikeldensiteten. Brytningsindex av neutral Xe och de första tio jontillstånden hos Xe beräknades med hjälp av en modell konstruerad i detta projekt, kallad för step-model. Följaktligen introducerades samtliga jontillstånden hos Xe från 0 till 10 in i 3D modeller av Xe-Ar nanoklustren med brytningsindexen av jontillstånden uppskattade med hjälp av Kramers-Kronig-relationerna. Här antogs det att samtidigt som resonansen för varje Xe-jon förflyttas visar 𝛽 (det vill säga den imaginära komponenten i det komplexa brytningsindexet) som en funktion av fotonenergin, ett icke-monotoniskt beteende med en förändring i fotonenergin. Simuleringsresultaten erhållna med hjälp av Kramers-Kronig-relationerna visade en avtagande trend för 𝛽 i Xe-joner med en laddning> 4+ till skillnad från en ökning i 𝛽 för joner med en laddning <4+ relativt dess motsvarande för neutral Xe. Denna metod ansågs tillräcklig för att användas som en första approximation. Dessa resultat visade att ju mer Xe joniseras (och därför minskar 𝛽) desto mer transparenta blir Xe-jonerna under en laserpuls och därför ser de mörkare ut jämfört med Ar som har sin resonans långt ifrån fotonenergierna relevanta för detta projekt (660–760 eV). Vidare simulerades temporära förändringar i Xe-jonpopulationer för att bekräfta de erhållna simuleringsresultaten via step-model. En massiv energideposition då den intensiva röntgenpulsen träffar Xe-kärnorna initierar en serie av joniseringsmekanismer under de första få femtosekunderna av pulsen. Simuleringar för de jonpopulationer som uppstår och försvinner under förloppet av en 100 femtosekunder-lång röntgenpuls visade att jontillstånd mellan 1+ och 10+ är redan förbrukade efter några få femtosekunder vid 1016 W/cm2. Vid slutet av pulsen observerades endast högt laddade Xe-joner (upp till 35+). Den slutsats som drogs var därför att mörkare regioner som liknade hål och observerades i rekonstruktioner från experimentella data var en konsekvens av en förflyttning av resonansen hos de högt laddade Xe-joner (>4+) relativt dess motsvarande i en neutral Xe så att deras spridning minskar. / Coherent Diffraction Imaging with intense x-ray pulses from X-ray Free-Electron Lasers has enabled structure determination of isolated nanoparticles, that cannot be studied with conventional methods, such as electron microscopy. The very short pulse durations and the intrinsic dependence of the scattering signal on the electronic structure of the scattering object also allow studying ultrafast light-induced dynamics with this technique. In this project, the ionization impact of Xe on Xe-Ar core-shell nanoclusters was studied. Theory predicts that neutral Xe has a lower scattering cross-section below its 3d resonance than that at photon energies above its 3d resonance. Therefore, a high contrast in clusters above the neutral Xe’s 3d resonance is expected. However, in the experimental data, unusual dark features resembling holes were observed at energies above Xe’s 3d resonance. As possible explanation, ionization of neutral Xe was suggested. To investigate this, 3D models of Xe-Ar nanoclusters were created to simulate the interaction of intense x-ray pulses and nanoclusters. The diffraction patterns generated by these 3D models were used to perform Iterative Phase Retrieval to reconstruct the particle densities. The refractive indices of neutral Xe and Xe’s first ten ionic states were computed using a model designed in this project, called the step-model. Hence, each and every ionic state of Xe from 0 to 10 were introduced into the 3D models of the Xe-Ar nanoclusters with refractive indices of the ionic states estimated based on the Kramers-Kronig relations. Here, it was assumed that as the resonance is shifting for every ionic state of Xe, 𝛽 (i.e the imaginary component of the complex refractive index) as a function of photon energy shows a nonmonotonic behavior as the photon energy is varied. The simulation results by Kramers-Kronig relations showed a decrease in 𝛽 for ionic states > 4+ in contrast to an increase in 𝛽 for ions with charges < 4+ relative to that of neutral Xe. This approach was sufficient to be used as a first approximation. The results showed that Xe ions become more transparent to the laser pulse as their charge increases (and 𝛽 thereby decreases) and therefore they appear darker than Ar, which has its resonance far away from photon energies relevant for this project (660–760 eV). Furthermore, temporal changes in ionic populations of Xe were simulated to confirm the simulation results obtained by the step-model. The massive energy deposition upon interaction with the intense laser pulse launches a series of ionization events in the Xe cores during the first few fs of the x-ray pulse. The simulation of ionic populations emerging and depleting during the 100-fs-long 1016 W/cm2 x-ray pulse showed that ionic states 1+ to 10+ are depleted already after a few fs. By the end of the pulse, only highly charged (up to 35+) Xe ions are observed. Therefore, it was concluded that the dark features resembling holes in reconstructions from the experimental data were a consequence of a shift in the resonance of highly charged Xe ions (>4+) relative to that of neutral Xe so that their scattering decreases.

Indiana University-Purdue University Indianapolis (IUPUI) / The details of Polarization Modulation Near-Field Scanning Optical Microscopy (PM-NSOM) are presented. How to properly calibrate and align the system is also introduced. A measurement of Muscovite crystal is used to display the capabilities of the setup. Measurements of supported Lβʹ 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid bilayers are presented, emphasizing how it was tooled in exploiting the anisotropic nature of the acyl chains. A discussion of how the effective retardance (ΔS = 2π( n_e-n_o )t/λ) and the direction of the projection of the acyl chains (θ) are measured simultaneously is given, (where t is the thickness of the bilayer and λ is the wavelength of light used). It is shown from ΔS the birefringence (ne-no) of the bilayer is determined, by assuming the acyl chain tilt with respect to the membrane's normal to be ϕ ≈ 32. Time varying experiments show lateral diffusions of ~ 2 x 10-12 cm2/s. Temperature controlled PM-NSOM is shown to be a viable way to determine the main phase transition temperature (Tm) for going from the gel Lβʹ to liquid disorder Lα state of supported DPPC bilayers. A change of ΔS ~ (3.8 +/- 0.3 mrad) at the main phase transition temperature Tm (≈41^o C) is observed. This agrees well with previous values of (ne-no) and translates to an assumed <ϕ> ~ 32^o when T < Tm and 0^o when T > Tm. Evidence of supper heating and supper cooling will be presented, along with a discussion of the fluctuations that occur around Tm. Finally it is shown how physical parameters such as the polarizability are extracted from the data. Values of the transverse (αt) and longitudinal (αl) polarizabilites of the acyl chains are shown to be, αt = 44.2 Å3 and αl = 94.4 Å3, which correspond well with the theoretical values of a single palmitic acid (C16) αt = 25.14 Å3 and αl = 45.8 Å3.

No description available.

The quantitative measurement of structural alterations at the nanoscale level is important for understanding the physical states of weakly disordered optical mediums such as cells/tissues. Progress in certain diseases, such as cancer or abnormalities in the brain, is associated with the nanoscale structural alterations at basic building blocks of the cells/tissues. Elastic light scattering, especially at visible wavelengths range provides non-invasive ways to probe the cells/tissues up to nanoscale level. Therefore, a mesoscopic physics-based open light scattering technique with added finer focusing, partial wave spectroscopy (PWS), is developed to probe nanoscale changes. Then, molecular-specific light localization technique, a close scattering approach called inverse participation ratio (IPR) is proposed that is sensitive to nano to microstructural cell/tissue alterations. In this dissertation, we have introduced the further engineered PWS system with the finer focus for precise volume scattering and molecular-specific light localization IPR techniques. As an application of PWS, we first probe precise scattering volume in commercially available tissue microarrays (TMA) tissue samples to standardize the existing cancer diagnostic methods by distinguishing the cancer stages. We also apply the PWS technique to probe chemotherapy drug-treated metastasizing cancer patients by xenografting prostate cancer cells using a mouse model and identify drug-sensitive and drug-resistance treatment cases. On the other hand, as an illustration of another mesoscopic physics-based molecular specific light localization technique, Confocal-IPR, we study the effects of a probiotic on chronic alcoholic mice brains by targeting the molecular specific alteration in glial cells, astrocytes and microglia, and chromatin of the brain cells through staining with appropriate dyes/proteins. Using structural disorder of IPR as a biomarker, the results show that probiotics in the presence of alcohol are beneficial and help overall brain health. Finally, a TEM-IPR study was performed using nanoscale resolution TEM imaging to support the optical IPR method by studying the anti-cancerous drug effect in ovarian cancer cells. The result shows that we can quantitatively measure the effect of anti-cancerous drugs in cancer treatment and the level of tumorigenicity far below the diffraction limit, and it has a similar effect and supports the optical IPR method.