Lors de la construction de structure réalisée en plusieurs phases de bétonnage, les déformations du béton sont restreintes durant son durcissement. Quand le retrait est restreint, des contraintes de traction sont induites dans le matériau et un risque de fissuration est présent. Il est alors nécessaire de modéliser l’évolution des propriétés au jeune âge afin de prédire le comportement de la structure durant le jeune âge du béton. La difficulté réside dans le fait que la modélisation des propriétés du béton doit être basée sur des données expérimentales au jeune âge et que ces données doivent être obtenues automatiquement car le durcissement du béton se produit rapidement pendant les premières heures et les premiers jours. La thèse porte sur l’étude expérimentale et numérique des propriétés au jeune âge des matériaux à base de ciment et plus particulièrement sur le développement des déformations endogènes, le coefficient de dilatation thermique, le module d’élasticité et le fluage propre en compression et en traction. A cet effet, un travail complet a été réalisé à l'ULB et à l’Ifsttar impliquant le développement d'une nouvelle approche avec de nouvelles procédures d'essai et la conception de nouveaux dispositifs d'essai pour générer des données expérimentales depuis la prise du matériau. La méthodologie est basée sur deux méthodes d'essai répété. Pour la caractérisation du comportement viscoélastique d'un béton depuis sa prise, un essai de chargement permanent couplé à un essai avec des chargements répétés de plusieurs minutes est nécessaire. Les déformations endogènes, le coefficient de dilatation thermique et la prise sont caractérisés avec des variations thermiques répétées sur un échantillon de béton. Cette nouvelle approche a été définie sur un béton ordinaire et ensuite étendue sur l’étude de 4 paramètres pertinents : le rapport eau-ciment, l'effet de restriction de l'agrégat sur la pâte de ciment dans le développement des propriétés du béton au jeune âge, la substitution du ciment par des additions minérales et la différence de comportement en traction et en compression. Sur la base de ces résultats expérimentaux, de nouveaux modèles ont été développés pour la caractérisation des propriétés au jeune âge de matériaux cimentaires depuis le temps de prise. Une version adaptée de la modélisation du fluage propre dans le Code modèle 2010 est également proposée / For usual concrete structure built in several phases, concrete deformations are restrained during the hardening process. When shrinkage is restrained, tensile stresses are induced and a cracking risk occurs. Modelling the evolution of an early age set of parameters on concrete is necessary to predict the early age behaviour of concrete structures. The difficulty lies in the fact that the modelling of concrete properties must be based on experimental data at early age and this data must be obtained automatically because the hardening process of the concrete takes place rapidly during the first hours and also the first days. The thesis deals with experimental and numerical study of the early age properties of cement based materials and more specifically the development of the autogenous deformation, the coefficient of thermal expansion, the E-modulus and the basic creep in compression and tension. For this purpose, a comprehensive work was carried out at ULB and Ifsttar involving the development of a new approach with new test procedures and the design of new testing devices to generate experimental data since the setting of the material. The methodology is based on two repeated testing methods. For the characterization of the viscoelastic behaviour of a concrete since setting, a permanent loading coupled to a test with repeated minute-long loadings is needed. Whereas, the autogenous strain, the coefficient of thermal expansion and the setting are characterized with repeated thermal variations on a concrete sample. The new approach was defined on an ordinary concrete and then extended to the study of the following parameters: the water-cement ratio, the restrained effect of aggregate on the cement paste in the development of concrete properties at early age, the substitution of cement by mineral addition and the difference of behaviour in tension and in compression. Based on these experimental results, new models were developed for the characterization of the early age properties of cement based materials since setting time. An adapted version of the Model Code 2010 for the modelling of basic creep is also proposed

No description available.

No description available.

No description available.

Fetal growth restriction (FGR) is a common pregnancy complication resulting in increased neonatal mortality and morbidity. The aetiology of fetal growth restriction is not fully understood, but abnormalities in placental development are, leading to abnormalities in placental structure which are thought to affect supply of oxygen to the fetus. The source of fetal hypoxia is unknown due to the difficulty in obtaining oxygenation data in the context of pregnancy using existing techniques. There is also an absence of data relating to oxygenation in FGR pregnancies. Oxygen-Enhanced MRI (OE-MRI) and Blood Oxygen-Level Dependent (BOLD) MRI permit noninvasive acquisition of data related to changes in the concentration of dissolved oxygen (pO2) and changes in hemoglobin saturation (sO2) under air- and oxygen- breathing (hyperoxic challenge).The aim of this project was to determine whether MRI methods can provide information relating to placental oxygenation in normal and FGR-compromised pregnancy, to investigate fetal brain oxygenation and to assess the potential confound of placental perfusion changes under hyperoxic challenge. After optimization of sequences in non-pregnant volunteers, similar pO2 and sO2 increases under hyperoxic challenge were seen in normal and FGR pregnancy. This suggested placental oxygenation was similar and that fetal extraction of oxygen may be a likelier cause of fetal hypoxia. Normal fetal brain oxygenation was found not to increase under hyperoxic challenge, which may be due to hemodynamic adaptation to limit cerebral hyperoxygenation. Finally, the robustness of these oxygenation results was supported by the lack of placental perfusion changes observed under hyperoxia using Arterial Spin Labeling (ASL).In conclusion, MRI methods successfully provided information on placental and fetal oxygenation in normal and abnormal pregnancy, obtaining novel data informing the aetiology of FGR and the physiology of the fetal brain.

Ce mémoire présente une étude sur la caractérisation des propriétés mécaniques dépendantes du temps par nanoindentation instrumentée à différentes températures.Ce sujet de recherche porte sur l’adaptation des méthodes d’indentation classiques aux problématiques de la caractérisation à hautes températures. Les méthodes développées dans ces travaux ont pour premier objectif d’apporter une meilleure compréhension des phénomènes dépendants du temps et de la température par une approche locale. Le second objectif est d’apporter des éléments de comparaison entre le comportement à l’échelle microscopique et macroscopique.Les méthodes proposées sont principalement fondées sur l’essai de relaxation en indentation. Ses développements et applications aux matériaux polymères et métalliques sont étudiés de manière analytique puis expérimentale. L’étude analytique nous montre que ce type d’essais en indentation peut être directement comparé à un essai uniaxial. Elle montre également que la cinétique de chargement a une grande influence sur la qualité des résultats obtenus en relaxation.L’étude expérimentale proposée, en température, permet d’extraire la sensibilité à la vitesse de déformation ainsi que l’énergie d’activation des phénomènes visqueux. Cependant, la dérive thermique limite la durée des essais – la durée maximum du segment de relaxation reste inférieure à quelques minutes. Une autre étude réalisée à température ambiante ouvre la voie à des durées de caractérisation plus longues. Celle-ci se fonde sur l’équivalence entre aire et raideur de contact pour un matériau homogène. Un maintien de l’aire de contact constante pendant 10 heures est effectué sans signes de dérive.Finalement, l’application de la nanoindentation à hautes températures à la caractérisation in situ des changements microstructuraux pour un alliage d’aluminium est étudiée. Les résultats de l’étude montrent qu’il est possible d’obtenir la cinétique de recristallisation avec un seul échantillon et en un temps limité. / This manuscript presents a study on the mechanical properties’ characterization of time dependent phenomena using instrumented nanoindentation at different temperatures.This research subject treats the development of methods dealing with the adaptation of classical indentation methodologies to high temperature characterizations. Bringing a better understanding of time and temperature dependent phenomena at a local scale is the first aim of the methods developed. The second objective is to compare materials behaviors measured at micro and macro-scale.The proposed methods are based on indentation relaxation tests. Their development and applications to polymers and metals characterization are studied analytically and experimentally. The analytical study shows that the indentation relaxation test is equivalent to the uniaxial one. This study also highlights the great influence of loading kinetics on the measured relaxation behavior.The proposed experimental study in temperature permits the extraction of the strain rate sensitivity and the activation energy of the viscous phenomena. However, thermal drift limits the characterization duration – i.e. the maximum experimental time remains limited to a couple of minutes. Another experimental study configuration, at room temperature, opens the way to longer test durations. It is based on the equivalence of contact area and stiffness for a homogeneous material. With this configuration, we successfully hold the contact area constant for 10 hours without any evidences of drift.Eventually, the high temperature nanoindentation application to in situ microstructural changes characterization of an aluminum alloy is studied. Measurements and limitations are carefully discussed for a better understanding of the studied phenomenon. The results show that the recrystallization kinetics can be successfully described with reduced test duration and samples’ set.

Relaxation procedures and anxiety relief were reviewed. Effects of cognitive and expectancy variables in reduction of avoidance behavior were also extensively reviewed. Various theoretical models for desensitization were presented. Use of symbolic control in classical conditioning and use of self-control methods in anxiety reduction were discussed. Special emphasis was given to self-desensitization and cue controlled relaxation. One goal of the experiment was to determine whether a musical stimulus associated with counter anxiety procedures could reduce or prevent subjects' phobic responses in the presence of the phobic situation. Another goal was to determine the relative efficacy of two counter anxiety procedures (anxiety relief and progressive muscle relaxation) in lowering muscle tension and in reducing or preventing speech anxiety. Several implications were drawn from the study. Relaxation alone may alleviate anxiety and phobic behavior without being paired with phobic stimuli. Cognitive variables such as expectancy and feedback of progress make a substantial contribution to treatment of situational anxiety. Progressive muscle relaxation may not be the technique of choice for producing low levels of muscle tension. Recommendations for future research were specified, including additional measures and control procedures.

The primary purpose of the present study is to demonstrate that acne vulgaris can be reduced by psychological treatment. A cognitive-behavioral adjunctive intervention involving biofeedback-assisted relaxation and cognitive imagery procedures for the treatment of acne vulgaris was investigated in this study with 30 patients, already receiving traditional dermatological treatment, as participants. A three-group design was used which consisted of a treatment (relaxation-imagery), a rational behavior group therapy attention-comparison, and a medical intervention control (medication and lesion extraction) group.

The assumption that EMG biofeedback cultivates an antistress response was tested under stress conditions while investigating the comparative efficacy of low versus high arousal treatment strategies. Biofeedback-assisted, cue-controlled relaxation training was used as the low arousal treatment strategy for half of the 20 normal subjects used in the study. The other half received a high arousal treatment strategy which used the same training in combination with an avoidance conditioning procedure. In this procedure mild electric shock was used as contingent aversive stimulation designed to reinforce relaxation responses. Both groups received four in-lab training sessions with a 4-day interim of home practice of cuecontrolled relaxation prior to the last in-lab training session. Pretraining assessment consisted of four 10-minute periods of alternating no-stress and stress conditions. Mild electric shock and loud tones were used as stressors. Posttraining assessment was identical to pre training except subjects employed self-directed, cue-controlled relaxation rather than self-directed relaxation based on instructions without training. Frontal EMG, subjective mental and muscle tension ratings, and behavioral observations of relaxation behavior served as dependent measures during pre- and posttraining assessment. EMG readings were used during in-lab training and the two subjective rating scales were used during home practice.

This investigation evaluated the efficacy of relaxation training and cognitive therapy separately and in combination in enhancing the coping skills of patients during epidural steroid injections. Subjects consisted of 80 back pain patients. They were randomly assigned to four groups to receive either relaxation training, cognitive therapy, relaxation and cognitive therapy, or attention control treatment. All subjects were provided preparatory information describing the procedure for the epidural injection and typical physical sensations experienced by patients undergoing the procedure. Relaxation training consisted of Jacobsonian progressive relaxation instructions which were modelled by the trainer. Cognitive therapy consisted of instructions and a work sheet designed to assist subjects in designing positive (rational) self statements concerning the injection procedure. Attention control procedures involved instructions and written exercises of equal duration to the relaxation and cognitive treatments but containing no instructions for the control of anxiety and pain. The three experimental groups exhibited significantly fewer "ae1f-distress" verbalizations during the injection. On other dependent measures, namely, the remaining catagories of pain verbalizations, gross body movements, heart rate, and independent ratings of anxiety there were no significant differences among experimental and control groups. Results are discussed in terms of spontaneous use of coping skills, habituation, individual differences in predisposition to specific coping strategies, and possible cultural/class/educational correlates of specific coping strategies. Improvements in methodology and directions for future research are recommended.