Fighting sexual violence against women and children in South Africa is regarded as a priority. The aim of this study is to explore the reasons for the reluctance to disclose sexual abuse by middle childhood children. Some of the factors that were highlighted that cause the reluctance to disclose sexual abuse by middle childhood children were: threats made by the perpetrator, the relationship with the perpetrator, stigmatization and talking about sexual related matters were seen as a taboo. The study reveals that there is lack of parental support especially when the perpetrator is a family member as they want to avoid embarrassment. It was also discovered that it is difficult for those parents who have unresolved issues of sexual abuse to handle their children’s disclosure. The study further shows that people do not understand the justice process especially the bail conditions. They lose faith in the system especially when they see the perpetrator outside and they do not understand that the investigation is still in process. It was discovered that FCS (Family Violence, Child Protection and Sexual Offences Unit) and FSW (Forensic Social Work) offices/environment should be better equipped and child friendly to put sexually abused children at ease. It was indicated that parents should supervise their children at all times. Children should be assured that it is not their fault and they do not deserve to be sexually abused. / MSW (Forensic Practice), North-West University, Potchefstroom Campus, 2014

Fighting sexual violence against women and children in South Africa is regarded as a priority. The aim of this study is to explore the reasons for the reluctance to disclose sexual abuse by middle childhood children. Some of the factors that were highlighted that cause the reluctance to disclose sexual abuse by middle childhood children were: threats made by the perpetrator, the relationship with the perpetrator, stigmatization and talking about sexual related matters were seen as a taboo. The study reveals that there is lack of parental support especially when the perpetrator is a family member as they want to avoid embarrassment. It was also discovered that it is difficult for those parents who have unresolved issues of sexual abuse to handle their children’s disclosure. The study further shows that people do not understand the justice process especially the bail conditions. They lose faith in the system especially when they see the perpetrator outside and they do not understand that the investigation is still in process. It was discovered that FCS (Family Violence, Child Protection and Sexual Offences Unit) and FSW (Forensic Social Work) offices/environment should be better equipped and child friendly to put sexually abused children at ease. It was indicated that parents should supervise their children at all times. Children should be assured that it is not their fault and they do not deserve to be sexually abused. / MSW (Forensic Practice), North-West University, Potchefstroom Campus, 2014

Since most of the electrical energy is consumed by the electrical motors, it is necessary to use the electrical energy as efficient as possible. Throughout this study four different types of motors (induction motor, permanent magnet radial flux DC motor, permanent magnet axial flux DC motor, switched reluctance motor) are considered and compared based on their torque per unit volume and speed performance comparison. Torque per unit volume equations are obtained for each of the motor, related to quantities such as magnetic flux density and electric loading and the speed performances are compared by using a washing machine application, which has a wide speed range. As a result of this study torque per unit volume and speed performance of each of these four types of motors are obtained and motors of different types are evaluated due to their torque per motor volume, torque per ampere, efficiency and etc. over a wide speed range to have an idea about the applications of these motors.

O objetivo do trabalho é apresentar o funcionamento de um gerador a relutância chaveado monofásico. Para isso, foi desenvolvido um modelo computacional em ambiente Matlab Simulink, fazendo-se a comunicação entre diferentes partes do sistema. O comportamento da dinâmica de geração é apresentado para diferentes pontos do sistema, e testes experimentais realizados em um pequeno protótipo confirmam as características funcionais desta máquina. Ensaios realizados comprovam sua funcionalidade e simplicidade de operação, tendo estabilidade de geração para ampla faixa de velocidade de funcionamento, caracterizando uma máquina promissora, robusta e eficiente para aplicações especiais. / This work presents a single-phase switched reluctance machine operating as a generator. For that purpose, a computational model was developed in Matlab Simulink environment, wherein all the system components, such as voltage source, drive and machine model, and load were integrated. The current and voltage behavior for several points of operations are presented. Furthermore, experimental tests were also carried out in a simple prototype to validate its functionality and simplicity of operation, providing a stable power generation over a wide range of speed. The results showed that the single-phase switched reluctance generator can be robust, efficient, and promising for especial applications.

Ce travail de recherche est réalisé dans le cadre d'une collaboration internationale entre l'Université Technique de Cluj-Napoca en Roumanie et l'Ecole Centrale de Lille en France. Cette thèse a comme premier objectif, de réduire l’ondulation de couple d’une machine triphasée 6/8 à réluctance variable grâce aux paramètres de contrôle dans le mode de fonctionnement moteur et générateur. Par conséquent, un modèle analytique a été développé et mis en œuvre dans un environnement de calcul numérique. Un outil d'optimisation permettant de trouver les meilleurs paramètres de contrôle a été utilisé. Toutefois, le processus d’optimisation est très lent.En conséquence, une stratégie pour réduire le temps du processus d'optimisation sans abaisser la précision des résultats est proposée. Une stratégie de ‘mapping’ est utilisée entre un modèle grossier mais rapide et un modèle fin mais lent. Un travail est mené sur le choix du modèle grossier, dans le cadre d’un modèle fournissant des valeurs en fonction du temps. Deux stratégies de ‘mapping’ ont été utilisées dans cette thèse : l’‘Output Space Mapping Proportional’(OSMP) et le Manifold Mapping (MM). Ces deux stratégies sont utilisées pour déterminer les paramètres de contrôle optimaux. Le problème d’optimisation est ensuite complété en ajoutant des variables géométriques au processus d’optimisation du contrôle. Les outils développés sont ensuite utilisés dans le cadre du dimensionnement par optimisation d’un alterno-démarreur automobile. Finalement, des expériences et des essais sur un prototype de Machine à RV sont menés afin de valider les résultats du processus d'optimisation en mode moteur et générateur. / The switched reluctance machine has a simple construction making it cheaper in execution but one of the drawbacks of this machine is the torque ripple. This thesis had as first target, the usage of an optimization tool to calculate the best control parameters to correct this major drawback in motor and generator operation modes. Hence, an analytical model that takes into account the machine geometry and that is able to be simulated in both operation modes by adjusting the commutation angles was provided and implemented in a calculation environment. The second target of this work is to investigate a method to reduce the optimization time without lowering the accuracy of the results. The strategy used in the optimization process is known in literature as the space mapping technique, more precisely for this thesis output space mapping proportional and manifold mapping were studied. After testing them on a mathematical model it was possible to continue the investigation on defining the optimal control parameters of a three-phases 6/8 SR machine prototype, being able that further to use this strategy in a much complicated process, i.e. defining the right geometry and control of a SR machine to be used in automotive integrated starter alternator systems. The final target of the thesis was to conduct experiments and tests on the existing prototype in order to partially validate the results of the optimization process.

Ce mémoire de thèse constitue une contribution à l'investigation des génératrices destinées à une application éolienne en mer. Le but est de rechercher les solutions optimales dans un domaine de recherche vaste contenant entre huit et onze variables d'optimisation, tout en respectant un cahier de charge bien précis. Afin d'y parvenir, un modèle multi-physique a été développé permettant la détermination des distributions du champ électromagnétique et de température dans les topologies de génératrices choisies avec prise en considération des non-linéarités des matériaux. La méthode des constantes localisées couplée aux fonctions d'interpolations a été choisie comme solution offrant un bon rapport temps de calculs/précision, prenant ainsi en considération les caractéristiques des matériaux (thermiques et magnétiques). Le modèle développé a été couplé à un algorithme d'optimisation génétique, NSGAII, permettant dans un premier temps ; d'investiguer le poids nécessaire des aimants permanents et des parties actives de deux topologies de génératrices synchrones à aimant permanent où dans la première les aimants sont montés en surfaces et dans la seconde insérés en concentration de flux, trois puissances différentes ont été investiguées 5, 8 et 15 [MW]. Dans un second temps, l'intégration d'un multiplicateur de vitesse magnétique dans la chaîne de conversion éolienne a été étudiée à travers la même approche optimale utilisée précédemment tout en comparant le poids nécessaires des aimants permanents pour ce type d'entrainement avec celle des topologies à attaque directe (sans multiplicateur de vitesse). / The aim of this PhD report is the investigation of electrical generators dedicated to an offshore wind turbine application. The main goal is to find optimal solutions in a vast research domain containing between eight and eleven optimization variables, while respecting a the imposed constraints. In order to achieve this goal, a multi-physics model was developed allowing the determination of the electromagnetic and temperature fields distributions in the selected topologies. Lumped models coupled to the interpolation functions were chosen as a solution offering a good computation time / precision ratio, thus taking into consideration the characteristics of the materials (thermal and magnetic). The developed model was coupled to a genetic optimization algorithm, NSGAII, allowing at first; the investigation of the necessary permanent magnets weight and the active parts one of two permanent magnet synchronous generator topologies where in the first the magnets are mounted in surfaces and in the second inserted in order to have flux concentration, three different powers have been investigated 5, 8 and 15 [MW]. Second, the integration of a magnetic gear in the wind energy conversion chain was studied using the same optimal approach previously used, while comparing the weight required of permanent magnets for this type of training with that of direct drive topologies (without gearbox).

Orientador: Prof. Dr. José Luis Azcue Puma / Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Engenharia Elétrica, 2016. / Este trabalho apresenta o controle direto de potencia do gerador de relutancia variavel de 12/8 utilizando o controlador fuzzy PI auto-ajustavel e o controle vetorial do inversor conectado à rede eletrica. Inicialmente são estudados os principios de operação da maquina e a topologia do conversor eletronico de potencia que sera utilizado para aciona-lo. Usando o software de simulaçãoMatlab/Simulink é implementado o modelo da maquina de relutancia variavel utilizando as curvas caracteristicas, de corrente e torque, que foram extraídas utilizando dados experimentais. Utilizando o modelo da maquina é projetado o controlador de velocidade para sua operação no modo motor. Tambem sera projetado o controlador de potência PI utilizando o modelo estimado do sistema de conversão de energia eólica. A partir dos ganhos do controlador PI é projetado o controlador fuzzy PI autoajustavel com o objetivo de melhorar a resposta em regime permanente da potencia controlada. A potencia gerada pelo gerador de relutancia variavel é injetada à rede eletrica, atraves do controle independente das potencias ativa e reativa, para este proposito é utilizado um conversor trifasico de dois níveis. Na parte experimental deste trabalho foi implementado o controle de corrente por histerese para maquina operando no modo motor, posteriormente foi implementado o controle de corrente e controle da tens~ao no barramento CC para a máquina operando no modo gerador. Os resultados de simulação e experimentais se mostraram coerentes validando os controladores propostos. / This work presents the direct power control of the switched reluctance generator of 12/8 using the self-tuning fuzzy PI controller and the vector control for inverter connected to the grid. Initially, the machine's operating principles and the topology of the power electronics converter used to drive this machine are studied. The model of switched reluctance machine is implemented in Matlab/Simulink simulation software using the characteristic curves of current and torque extracted using experimental data. Using the machine's model, It is designed the speed controller for its operation in motor mode. Also, the PI controller is designed for the power control loop based on the estimation of the wind energy conversion system. Using the gains of the PI controller, It is designed the self-tuning fuzzy PI controller, in order to improve the steady state response of the power control loop. The power generated by the switched reluctance generator is injected into the power grid through the independent control of active and reactive power, for this purpose is used a three-phase two level converter. In the experimental part of this work was implemented the hysteresis current control for machine operating in motor mode, also, It was implemented the current and DC bus voltage control for the machine operating in generator mode. The simulation and experimental results were proved consistent and these results validate the proposed controllers.

Le travail présenté dans ce mémoire traite de la problématique du dimensionnement de structures innovantes de génératrices, à savoir les machines à flux axial ou encore discoïdes, destinées aux éoliennes de grande puissance allant jusqu'à deux dizaines de mégawatts. Les machines synchrones à aimants permanents à flux axial étant intrinsèquement tridimensionnelles, l'optimisation de leur dimensionnement nécessite un modèle dimensionnant tridimensionnel et multiphysique qui peut être, de par sa nature 3D, très consommateur en mémoire et en temps de calcul. On se propose donc, dans ce mémoire, de développer une approche de modélisation par constantes localisées offrant un très bon rapport entre vitesse de calcul et précision afin d'accélérer de façon significative les premières phases de la procédure de dimensionnement. L'approche par constantes localisées peut par ailleurs s'appliquer de manière similaire aux principales physiques concernées (magnétique, thermique et mécanique). Plus particulièrement pour la partie magnétique, l'approche par constantes localisées est mise en œuvre par le biais de réseaux réluctants magnétiques génériques. Le principe de la méthode développée repose sur le découpage de la géométrie de la machine en volumes élémentaires finis parallélépipédiques à l'instar de qui est fait avec la méthode des éléments finis. En effet, chaque volume élémentaire étant modélisé par un réseau réluctant local, le découpage de la géométrie conduit à la génération automatique du système algébrique magnétique de la structure et dont la solution fournit la distribution locale du potentiel scalaire magnétique aux nœuds des volumes élémentaires. Cette approche de modélisation a été implémentée dans un code de calcul interne au GREAH. La modélisation de la génératrice à flux axial par réseaux réluctants a été validée par des simulations 2D et 3D par éléments finis. Le code de calcul développé intègrera les travaux en cours sur les modèles thermique et mécanique au GREAH afin d'aboutir à un code de calcul multi-physique par constantes localisées / The aim of this PhD thesis is to propose a design approach of the axial flux permanent magnet synchronous generator for multi megawatts wind converter application. The axial flux permanent magnet synchronous machine being intrinsically three dimensional, a 3D multiphysics sizing model is needed in order to conduct an efficient optimal design of this type of machines. Unfortunately, 3D multiphysic models are generally issued from finite element method. So, they are very heavy to be handled in a reduced time from an engineer point of view and especially at the first stages of the design procedure. In order to address the faster axial flux machine design, this PhD thesis develops a lumped parameters approach modelling offering a good computation time to precision ratio and thus helping to reduce considerably the spent time in the first stages design procedure. The lumped parameters modelling approach is also well suited for the modelling of the three main physics to be considered in an electrical generator (magnetic model, thermal model and mechanical model). For the magnetic model, the lumped parameters approach consists, in this thesis, in the development of a generic magnetic reluctance network linked to the machine geometry. In fact, the latter is divided into parallelepipedic elementary volumes, each of them is modelled by a local reluctance network. The reluctance network of the hole machine geometry results then automatically in an algebraic magnetic system, the solution of which provides the distribution of the scalar magnetic potential at the elementary volume nodes. The described lumped parameters modelling was implemented in a computational code developed at the GREAH Lab. The effectiveness of the reluctance network axial flux machine modelling was validated by 2D and 3D finite element simulations. The lumped parameters computational code will regroup the ongoing developments of thermal and mechanical models at the GREAH Lab in order to reach the completion of a mutliphysics lumped parameters computational code.

The switched reluctance generator emerged as an alternative generator and grew in interest among the scientific community during the last decade. It has a simple construction and comes up as a competitive option when one deals with variable speed applications and also when power electronics is required. Nowadays the most aimed applications are the aircraft applications, hybrid or electric vehicles and wind power. This machine has a doubly salient structure without copper in the rotor. The coils are concentrated in the stator poles. Thus, there is low copper and iron consumption and, because of it, this machine is closer to the modern environmental requirements. The switched reluctance generator driving uses power electronics and needs continuous information about the rotor position to drive properly the switches of the phases. The optimal design for this machine is still been established from the experimental results. Many operational details are under investigation. The machine has two different electrical circuits: one for the excitation and other when the load is fed. It is possible to insulate those two circuits and because of this it is also possible to reduce the electronic switches count. This work is helpful to understand how the SRG works. To get it the goals were to build a mathematical model for this machine and to simulate its operation. And than to know how it dynamically conducts. A prototype was constructed and used to test some driving circuits with it. Also it is presented an extensive comparative study. With this all this work presents a contribution for the development of this kind of machinery. / O gerador a relutância chaveado despertou interesse crescente na comunidade científica na última década. Esta máquina elétrica caracteriza-se por sua simplicidade construtiva e tem sido apresentada como uma alternativa competitiva quando é requerida eletrônica de potência, como ocorre nas aplicações em que a velocidade é continuamente variável. As aplicações mais visadas atualmente estão relacionadas à aeronáutica, aos veículos elétricos ou híbridos e à energia eólica. A máquina tem estrutura em dupla saliência, não tem enrolamentos no rotor e as bobinas do estator estão concentradas. Por isto consome menos cobre e aço e é vista como uma máquina elétrica mais próxima dos requisitos ambientais modernos. Seu acionamento necessita de eletrônica de potência e de informação contínua da posição do rotor, para estabelecer os instantes de energização das fases, para gerar energia elétrica. A técnica de projeto de geradores a relutância chaveados está se consolidando a partir de resultados experimentais. Mas vários aspectos operacionais estão sob investigação. O circuito elétrico do gerador a relutância chaveado tem duas malhas elétricas, uma durante a excitação e outra durante a geração. Seu acionamento pode utilizar conversores com contagem reduzida de chaves semicondutoras. O presente trabalho ajuda a compreender o funcionamento do gerador a relutância chaveado e a sua modelagem matemática. Simulações são apresentadas para detalhar a dinâmica das suas partes. Um protótipo foi construído e usado para ajustar os circuitos de acionamento e realizar estudos experimentais, e com isto contribuir para o desenvolvimento desse tipo de máquina elétrica. / Doutor em Ciências

CoordenaÃÃo de AperfeÃoamento de Pessoal de NÃvel Superior / O Motor de RelutÃncia VariÃvel (MRV) vem cada vez mais chamando a atenÃÃo da indÃstria e da comunidade acadÃmica. Isso se deve ao crescente desenvolvimento da eletrÃnica de potÃncia e na Ãrea de microprocessadores nos Ãltimos anos, o que permitiu o avanÃo de outros sistemas de acionamentos tais como com MRV. A competitividade do MRV se justifica por seu baixo custo de produÃÃo e manutenÃÃo, uma elevada densidade de potÃncia, robustez e resistÃncia a faltas. O presente trabalho propÃe um esquema de controle robusto baseado em um Controlador Preditivo Generalizado (GPC) pertencente a famÃlia de Controladores Preditivos Baseados em Modelo (MPC) aplicados a malha de corrente e velocidade de um sistema de acionamento com MRV. O controlador proposto, assim como controladores tradicionais aplicados neste tipo de sistema tais como o controlador por Histerese e o controlador PID sÃo tambÃm aplicados com o objetivo de proporcionar meios de comparaÃÃo dos resultados experimentais obtidos. A estrutura do controlador à baseada no projeto de um filtro de modo a permitir uma resposta rÃpida, rejeiÃÃo a distÃrbios, atenuaÃÃo de ruÃdos e robustez com um baixo custo computacional. O controlador proposto foi implementado e os resultados comparados com controladores tradicionais e analisados quantitativamente por meio de Ãndices de desempenho. Para execuÃÃo das rotinas de controle foi utilizado um DSP das Texas Instruments (TMS320F28335), sendo suas caracterÃsticas principais apontadas. O algoritmo do software de controle à esquematizado. O trabalho fez uso da bancada de pesquisa em MRV do laboratÃrio do Grupo de Pesquisa em AutomaÃÃo e RobÃtica (GPAR) da Universidade Federal do Cearà (UFC).