The main theme of this Master´s thesis is a project of detached residential house of a terraced type, partially located in terrain. The building has three floors and a basement and is covered by a flat roof. There are six residential units in the house and three parking spaces, including technical support. The house will be built in the village of Pribyslavice, on the plots with parcel numbers 140/1 and 145/1. The ground plan of the house is of a rectangular shape. The vertical load-bearing structural system is chosen to be made from bricks. Horizontal system is made by using Spiroll prestressed panels. The internal staircase is made from concrete, monolithic. The material and construction solutions is chosen to be close to passive standards. The project fully respects currently applicable standards and technical regulations of individual manufacturers.

The master thesis with the name Set of residential buildings in SM6, Staré Město - Project planning implementation of construction solves preparation and realization of building. The aim of master thesis is to design of time, financial, material and human resources. The thesis contains calculation, time schedule, building-site, technologicals standards, controls and trials plans, design of mechanism, study of realization of the main stages. The thesis is prepared on the basis of project documents provided by the investor with the approval of the design office.

Diploma work "Problems of house price reduction due to defects manifested with damp" deals with the issue of property valuation and subsequent sale of the defect. The first chapter describes valuation and other important factors relating to the Act valuation. The second chapter deals with the necessary documentation for property valuation and basic terminology. The third section deals with defects that could occur in the residential building as well as their possible correction. Another part of this work is focused on the actual valuation of the object to a defect with property damage and the last chapter deals with the actual real estate market and the subsequent sale of such property with the defect. The attachments of the case study is then focused on the valuation of the house and without defects and possible solutions and proposed procedures for sale.

Den bostadspolitik som förts de senaste två decennierna har gett oss en alltmer segregerad stadskärna i Stockholm. Byggsubventionernas avveckling på 90-talet har lett till en historiskt låg byggtakt och ett byggande som ensidigt riktat sig till resursstarka grupper i samhället. Parallellt med detta har stora delar av hyresbeståndet ombildats till bostadsrätter vilket medfört att många relativt billiga hyreslägenheter i äldre fastigheter har försvunnit ur beståndet. Dessa är svåra att ersätta med nyproduktion, då dessa är dyrare. Kärnproblemet är förstås att det är dyrt att bygga hus och om man antar att den nuvarande bostadspolitiken består är det ytterst angeläget att utveckla kostnadseffektiva byggmetoder för att möjliggöra lägenheter med överkomliga hyror som kan bidra till att motverka boendesegregationen på sikt. Vårt förslag består av ett bostadshus i Stadshagen. Fastigheten är indelad i två byggnadskroppar som länkas samman via ett system av loftgångar kopplade till ett trapphus. Husen är uppbyggda av volymelement som staplats på en platsgjuten sockel. Elementens konstruktion baseras på transportcontainrar vilket ger en rationell byggprocess och hög grad av prefabrikation. I socklarna ryms en tunnelbanenedgång och en uthyrbar lokal samt gemensamma lokaler för de boende. Lägenheterna finns i tre storlekar: 1:or, 1,5:or och 4:or.  De större lägenheterna är i två plan. / The housing policy conducted over the past two decades has resulted in an increasingly segregated city center in Stockholm. The abolishment of housing subsidies in the 90s led to a historic low rate of construction and an urban development unilaterally directed towards the wealthy. Parallel to this, much of the housing stock has been converted to condominiums which caused many relatively cheap rental apartments in older buildings to disappear from the stock. These are difficult to replace with new housing, as they are more expensive. The core issue is of course that it is expensive to build houses and assuming that the current housing policy will last, ​​it is highly relevant to develop cost-effective construction methods in order to make possible apartments with affordable rents that can help to combat segregation over time. Our proposal consists of a residential building in Stadshagen. The property is divided into two buildings that are linked together by a system of access balconies connected to a stairwell. The houses are constructed with volume elements stacked on a concrete base. The design of the elements is based on shipping containers which provides a rational construction process and a high degree of prefabrication. The base contains an underground entrance, a business premise and common areas for the residents. The apartments are available in three sizes whereof the larger apartments have two floors.

In my masters thesis I deal with constructive technological project to build a residential building site technology. The aim is to solve the structure in terms of time, financial and material requirements based on technical data submitted by the designer and client requirements. Architectural and technological project of the thesis contains, in particular building equipment, technological regulations, schedule, financial budget, design mechanical assembly, inspection and test plan, health and safety, ZOV, waste management, etc.

The subject of this master’s thesis is elaboration of selected parts of the building tech-nology project of residential building Stepnice in Uherske Hradiste. Part of the project is technical report, estate road layout, studies of major technological stages, project of site equipment, design of major machines and mechanisms, technological regulations and control and test plans for prefabricated ceiling and masonry system. Attachment of this master´s thesis is drawings of site equipment, selected construction details, working safety, instructions for using the building, budget by items and a time plan. The aim of the project is to design appropriate and economically effective procedure for realization of the building.

The thesis deals with the design and calculation of selected parts of an apartment building in Brno. The apartment building is 6 floors (one underground floor and 5 above-ground floors), the underground floor is the entire reinforced concrete. The work focuses mainly on the static design and assessment of individual elements of reinforced concrete structures. The assessed load-bearing elements are the roof slab, ceiling slab 1.PP, prefabricated staircase, elevator shaft and so-called white bath (foundation slab, walls). All calculations are performed using SCIA Engineer. Individual ceiling slabs and staircases are solved by 2D models and the construction of the white bathtub is made in a 3D model. The design proceeded according to valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of this work is static design of reinforcement of all solved parts and drawing documentation.

This thesis theoretically in Part A deals with the solution in savings heating building and heating hot water. It examines the impact of austerity measures on the overall need for and consumption of heat energy and its economic impact and compared with each other in order to achieve maximum efficiency. Part B is their subsequent application to a given object - a residental building, various design alternatives and the resulting energy savings improvements. Experimental Part C deals with indirect measurement of the thermal conductivity of building materials.

The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.

Architectural and technological project of building the housing Terraces Havlickova contains technical report on construction technology project,coordination situation, building relationships with the wider transport routes, time and financial plan of the building object, study the implementation of major technological stages of a residential building,Project construction site, design of the main building machines,schedule of the main building construction object SO-01,plan for securing material resources for the construction of residential house,technological regulation for the implementation of excavations and roofs,inspection and test plan for the implementation of the excavations and roofs. The other award was prepared itemized budget apartment house SO-01, calculation of construction according to THU, health and safety plan and Listing of security risks and security measures on site