No description available.

Thesis (MEng) -- Stellenbosch University, 2002. / ENGLISH ABSTRACT: The tuning of coupled-resonator filters is an essential part of its production. It is, however, a time consuming and expensive process. The use of model-based parameter extraction algorithms as a semi-automated tuning procedure is examined. This thesis describes the development of such a procedure. Different models for the filter are compared. The extraction algorithm is based on the least squares method. A more robust procedure is presented which makes the parameter extraction possible, without the availability of good starting values. The algorithm is evaluated using a fourth order single mode direct coupled cavity filter with a centre frequency of 10GHz. The algorithm produces good results and makes the tuning of this type of filter possible in an effective way. It also allows for the diagnosis of the filter, which is a great advantage over the more conventional direct tuning methods. / AFRIKAANSE OPSOMMING: Die instelling van gekoppelde-resoneerderfilters is ’n essensiele deel van die vervaardiging daarvan. Dit is egter ’n tydsame en duur proses. Die gebruik van modelgebaseerde parameteronttrekking as ’n semi-geoutomatiseerde instellingsproses is ondersoek. Hierdie tesis beskryf die ontwikkeling van so ’n prosedure. Verskillende modelle vir die filter is vergelyk. Die onttrekkingsalgoritme is gebaseer op die kleinste-kwadraatmetode. ’n Meer robuuste metode word voorgestel wat die parameteronttrekking moontlik maak, sonder dat daar goeie beginwaardes beskikbaar is. Die algoritme word geevalueer aan die hand van ’n vierde orde enkelmodus direkgekoppelderesoneerderfilter met ’n senterfrekwensie van 10GHz. Die algoritme lewer goeie resultate en maak die instelling van hierdie tipe filter moontlik op ’n effektiewe wyse. Die metode kan ook gebruik word vir die diagnose van die filter wat ’n groot voordeel is bo meer konvensionele direkte instellingsmetodes.

Thesis (MScEng)--University of Stellenbosch, 2002. / ENGLISH ABSTRACT: Keywords: Coupled resonator filters, Co-axial line resonators, Basic Coupling Design, Co-axial resonator filter The study of the basic dynamics of filters, with the emphasis on coupled resonator filters, is presented. Special attention is paid to the synthesis of doubly terminated coupling matrices using the Darlington method. Due to restrictions placed on the filter by the equivalent circuit used, a coupling matrix reduction is applied to the resulting coupling matrix. An investigation is performed on A/2 co-axial line resonators, with the emphasis on rectangular co-axial line resonators with a round center conductor. The basic definition of the coupling coefficient is revisited and it is calculated using the method based on Bethe's theory and Cohn's experimental work. A 4th-order co-axial resonator filter operating at 3 GHz is designed using the theory outlined in this thesis. The measured response is in good agreement with the theory in terms of the center frequency, but disagree in terms of the coupling coefficient, bandwidth and Q-factor. The reasons for this, as well as suggestions for improving the accuracy of the parameters mentioned, are given. / AFRIKAANSE OPSOMMING: Sleutelwoorde: Gekoppelde resoneerder filters, Ko-aksiale lyn resoneerders, Basiese Koppeling Ontwerp, Ko-aksiale resoneerder filter Die studie van die basies dinamika van filters, met die klem op gekoppelde resoneerder filters, is voorgelê. Spesiale aandag is gegee aan die sintese van dubbelbelaste koppel matrikse met die gebruik van die Darlington metode. As gevolg van die beperkings wat op die filter geplaas word deur die gebruik van die ekwivalent stroombaan, word 'n koppel matriks vermindering gebruik. 'n Ondersoek is gedoen op A/2 ko-aksiale lyn resoneerders, met die klem op reghoekige ko-aksiale lyn resoneerders met 'n ronde binnegeleier. Die basiese definisie van die koppel koëffisiënt is hersien en dit is bereken met die gebruik van die metode wat baseer is op Bethe se teorie en Cohn se experimentele werk. 'n 4de-orde ko-aksiale resoneerder filter wat opereer by 3 GHz is ontwerp met die gebruik van die teorie wat in hierdie tesis gaskets word. Die gemete weergawe is in goeie ooreenkoms met die teorie in terme van die senter frekwensie, maar verskil in terme van die koppel koëffisiënt, bandwydte en Q-faktor. Die rede hiervoor, as ook voorstelle vir die verbetering van die akkuraatheid van die parameters wat genoem is, IS gegee.

Yes / This study presents an original asymmetric stepped-impedance resonator filter combined with meander coupled-line structures and enabling the realisation of finite transmission zeros (TZs) and the implementation of multi-band bandpass filters. The meander coupled sections (MCSs) tune the TZs and resonant frequencies: with higher-order spurious frequencies cancelled by the TZs, a single wideband with wide stopband from 1.18 to 1.84 GHz is possible. Furthermore, by positioning the finite TZs between the high-order spurious frequencies and adjusting the coupling strength between resonators, a quint-wideband filter can be realised, with centre frequencies of 1.19, 4.29, 5.43, 6.97, 9.9 GHz and fractional bandwidths of 31.9, 15.4, 15.8, 4.3, 39.2%, respectively. More importantly, two filters with single/quad-wideband performance can be realised by tuning the parameters of the MCS, and therefore they can be designed separately by using only one original structure. The triple-wideband filter is realised with the help of the asymmetric parallel uncoupled microstrip section. These filter structures enjoy the advantage of single/multi-band versatility, structure reusability and simplicity. The good in-band and out-of-band performance, low loss and simple structure of the proposed single/tri/quint-wideband filters make them very promising for applications in future multi-standard wireless communication. / European Union's Horizon 2020 research and innovation programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424.

The objective of this thesis is to introduce novel procedures and guidelines to design bandstop microwave filters for modern terrestrial and satellite wireless communication systems. Among all available microwave filter technologies, planar structures of microstrip and substrate integrated waveguide (SIW) are chosen, due to ease of fabrication, low profile, weight and manufacturing cost. Particularly, SIW structures are more attractive because they have a better insertion loss, quality factor, and power handling capability in comparison to their microstrip counterparts, and can also be easily integrated into other planar circuitries. A comprehensive hybrid analytic-optimization method is developed to synthesize any single-band as well as multi-band bandstop coupling matrix. In this method, the location of reflection zeros (RZs) and the attenuations in stopbands can be determined in advance. Several novel single-band, dual-band, and triple-band bandstop filters are designed using regular and ridged SIW resonators, in-line coupled singlet resonators, cross-coupled resonators, and bandstop stubs. The designed filters have fractional bandwidths up to 23% . Moreover, a tunable ridged SIW bandstop resonator and a tunable CPW resonator, etched into the top plate of the SIW transmission line, are introduced. Combining these two resonators, a dual-band SIW filter is designed that permits one of its stopband to be tuned while another stopband is fixed. All introduced filters in this thesis are verified by commercial electromagnetic software, analytic investigations using Matlab codes, and measurements. / Graduate

Thesis (PhD)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: In this dissertation a number of techniques to design multi-band filters, with specific focus on coupled resonator implementations, is presented. Multi-band transfer functions are constructed from single-band transfer functions using frequency mapping methods. A general class of rational mapping functions is presented that can accommodate arbitrary bandwidth specifications. Multi-band circuits are synthesised directly from multi-band transfer functions and are obtained by applying reactance transformations to single-band prototype circuits. For the direct synthesis of multi-band filters from multi-band transfer functions coupling matrix synthesis methods are employed. The circuits that result from matrix synthesis methods tend to have topologies that are undesirable from a practical perspective and must be simplified using rotations of the coupling matrix. The synthesis of multi-band filters through reactance transformations is both simple and result in filters that have practical topologies for realisation as coupled resonator circuits. Multiple filters are designed using different design methodologies and different transmission line technologies to illustrate the various design possibilities. The designs include both all-pole and cross-coupled filters and employ single-layer stripline, multi-layer stripline as well as coaxial resonators as transmission line technologies for the implementations. / AFRIKAANSE OPSOMMING: In hierdie proefskrif word verskeie ontwerpstegnieke vir multi-band filters aangebied en word daar spesifiek klem gelê op filters wat as gekoppelde resoneerder strukture geïmplimenteer kan word. Multi-band oordragsfunksies word geskep uit enkelband oordragsfunksies deur gebruik te maak van wiskundige afbeeldingstegnieke. ’n Spesiale klas van rasionale funksies word voorgestel wat spesifiek gebruik kan word om multi-band funksies te skep wat ’n arbitrêre bandwydte spesifikasie het. Multi-band stroombane word direk gesintetiseer vanuit multi-band oordragsfunksies en word ook verkry deur die toepassing van reaktansietransformasies op enkelband stroombane. Vir die direkte sintese van multi-band stroombane vanuit multi-band oordragsfunksies word stroombane gesintetiseer as koppelmatrikse. Stroombane wat op hierdie wyse gesintetiseer word is geneig om topologieë te hê wat nie baie gesog is vanuit ’n praktiese perspektief nie en matriks rotasies word dan hier ingespan om die stroombane se topologieë te vereenvoudig. Die sintese van multi-band stroombane deur gebruik te maak van reaktansietransformasies is beide eenvoudig en lei tot stroombane wat praktiese topologieë het vir implimentering as gekoppelde resoneerder strukture. Die ontwerpsmoontlikhede wat die verskillende metodieke bied word geïllustreer deur die ontwerp van verskeie filters op verskillende maniere waar daar gebruik gemaak word van verskeie transmissielyn tegnologië. Die filter ontwerpe sluit filters in waar alle transmissienulle by oneidige frekwensies is, sowel as gevalle waar somige transmissienulle by eindige frekwensies is. Die filters word geïmplimenteer deur gebruik te maak van koaksiale resoneerders sowel as enkellaag en multilaag strooklyn.

Thesis (MScEng)--Stellenbosch University, 2011. / ENGLISH ABSTRACT: This thesis presents the study, analysis and design of electronically tunable filters, that can be tuned over a wide frequency range (20-500MHz), for use in a direct sampling receiver. The final design does not have to be a single filter, but may be comprised of a filter bank which enables switching between the filters. The band of interest is too low to use normal transmission lines and lumped elements have to be used. Different topologies that can implement Coupled Resonator filters with lumped elements are investigated. Devices that can be used for tuning are also investigated and varactor diodes are found to be the most suitable tuning devices currently available. Two filters, one at the high-end and one at the low-end of the band, were designed and built, both using varactor diodes. These filters perform well in terms of tuning range, but achieving low losses with current technologies in this band remains difficult. / AFRIKAANSE OPSOMMING: Hierdie tesis meld die studie, analise en ontwerp van elektronies verstelbare filters, wat verstelbaar is oor ’n wye band (20-500MHz), vir gebruik in ’n direk-monster-ontvanger. Die finale ontwerp hoef nie ’n enkele filter te wees nie, maar kan bestaan uit ’n filterbank wat skakeling tussen die filters toelaat. Die betrokke band is te laag vir die gebruik van normale transmissielyne en diskrete komponente moet gebruik word. Verskillende topologieë wat gekoppelde resoneerder filters implementeer met diskrete komponente is ondersoek. Verstelbare komponente word ook ondersoek en varaktor diodes blyk die mees geskikte verstelbare komponent wat huidig beskikbaar is in hierdie band. Twee filters, een aan die hoë kant en een aan die lae kant van die band, is ontwerp en gebou, beide met varaktor diodes. Hierdie filters het wye verstelbare bereik, maar dit is steeds moeilik om verliese te beperk met die huidige tegnologie.

No / A novel multi-standard dual-wide band filter with a compact size of only 8.8 mm by 16.8mm is designed and developed for transceiver devices. The proposed filter has a fundamental bandwidth of 1.6GHz with fractional bandwidth (FBW) of 29.7% centered at the 5.4GHz band, and second bandwidth of 300.0MHz with FBW of 3.6% centered at the 8.15GHz band. The basic dual-wide bandwidth is attributed to the interaction of the novel modified polygon pair and upper stub loaded stepped impedance resonator. Moreover, the added down stub loaded stepped impedance resonator (SLSIR) further enhances the pass band performance by widening the bandwidth and optimizing reflection coefficient performance considerably. To validate the proposed ideas, the multi-standard filter is designed and simulated by Ansoft HFSS software. The simulated results agree well with the theory predictions. The featured broad bandwidths over two frequency bands and the miniaturized size of the proposed filter make it very promising for applications in future multi-standard wireless communication.

Ce mémoire traite de l’ étude et de la réalisation de composants à ondes élastiques de surface (SAW) pour des applications de filtrage dans les gammes VHF et UHF. Nous y étudions différentes structures de ces filtres, à commencer par des filtres à couplage acoustique longitudinal centrés aux alentoursdu gigahertz, de bande passante relative inférieure à 0,1 % réalisés sur quartz. Leur fabrication et leur caractérisation ont révélé des pertes d’insertion inférieures à 5 dB et des niveaux de rejet supérieurs à 20 dB, conformément aux prévisions de notre modèle de matrice mixte. Un tel filtre a été inséré dans un oscillateur pour valider la fonction réalisée. Pour une maîtrise accrue de la conception de ces filtres, nous avons développé un modèle tenant compte de la contribution des modes transverses sur leur fonction de transfert. Des comparaisons entre théorie et expérience ont permis de démontrer la précision de ce modèle. Nous nous sommes également intéressés à des structures de filtres à éléments d’impédance et à transducteurs en éventails (fan-shaped) pour la réalisation de bandes passantes relatives comprises entre 1 et 15 % dans la bande 100 − 300 MHz. Pour chacune de ces structures, nous avons développé un modèle permettant d’en étudier le comportement. Une configuration de filtre en treillis de bande passante relative proche de 2 %a été fabriquée et caractérisée, ainsi que plusieurs filtres à transducteurs en éventails de bandes passantes relatives supérieures à 10 %. Enfin, nous avons étudié deux approches qui nous ont permis de réaliser des dispositifs fonctionnant à des fréquences voisines de 3 GHz. La première, consiste à exploiter les vitesses de phase supérieures à 5 km.s−1 d’un guide d’ondes à base de carbone-diamant. La seconde exploite la résolution d’un procédé de lithographie par nano-impression pour réduire la période des réseaux d’ électrodes. / This thesis deals with the development of surface acoustic wave devices (SAW) for filtering applications in the VHF and UHF bands. Several filter structures are studied. The first ones are longitudinally coupled resonator filters (LCRF) manufactured on Quartz with a relative pass-band narrower than 0,1 % centered at about 1 GHz. These filters have been fabricated and characterized, yielding less than 5 dB insertion loss with rejection levels in excess of 20 dB as predicted by our P-matrix model. One of these filters has been mounted in an oscillator to validate its characteristics.To improve the design of such filters, we have developed a model accounting for transverse mode contributions on their spectral function. Comparisons between theory and experiment emphasizes the accuracy of the developed model. We also have investigated impedance element and slanted transducers (fan-shaped) filter structures to produce filters with relative pass-band ranging from 1 to 15 % in the 100 − 300 MHz frequency range. For each type of filters, we have developed a model to predict their electrical response. A balanced-bridge filter configuration with a 2 % relative pass-band and four fan-shaped filters with pass-band larger than 10 % have been fabricated and characterized. Finally, we have studied two approaches for the development of SAW devices operating at frequencies in the vicinity of 3 GHz. The first approach exploits Diamond-based substrates, providing phase velocity higher than 5 km.s−1. The second one uses a nano-imprint lithography process to reduce the pitch of electrode gratings.