To fulfill the objective of providing robust and reliable fiber optic pressure sensors capable of operating in harsh environments, this dissertation presents the detailed research work on the design, modeling, implementation, analysis, and performance evaluation of the novel fiber optic self-calibrated interferometric/intensity-based (SCIIB) pressure sensor system. By self-referencing its two channels outputs, for the first time to our knowledge, the developed SCIIB technology can fully compensate for the fluctuation of source power and the variations of fiber losses. Based on the SCIIB principle, both multimode and single-mode fiber-based SCIIB sensor systems were designed and successfully implemented. To achieve all the potential advantages of the SCIIB technology, the novel controlled thermal bonding method was proposed, designed, and developed to fabricate high performance fiber optic Fabry-Perot sensor probes with excellent mechanical strength and temperature stability. Mathematical models of the sensor in response to the pressure and temperature are studied to provide a guideline for optimal design of the sensor probe. The solid and detailed noise analysis is also presented to provide a better understanding of the performance limitation of the SCIIB system. Based on the system noise analysis results, optimization measures are proposed to improve the system performance. Extensive experiments have also been conducted to systematically evaluate the performance of the instrumentation systems and the sensor probes. The major test results give us the confidence to believe that the development of the fiber optic SCIIB pressure sensor system provides a reliable pressure measurement tool capable of operating in high pressure, high temperature harsh environments. / Ph. D.

Sensing in harsh environments is always in great need. Although many sensors and sensing systems are reported, such as optical fiber sensors and acoustic sensors, they all have drawbacks. In this dissertation, fused quartz and sapphire acoustic waveguides and sensors are developed for high temperature and heavy gamma radiation. The periodic structure, acoustic fiber Bragg grating (AFBG), is the core sensor structure in this dissertation. To better analyze the propagation of acoustic waves, the acoustic coupled more analysis is proposed. It could solve for the reflection spectrum of the AFBG with at most 2.1% error. For the waveguide, the fused quartz "suspended core" waveguide is designed. It achieved strong acoustic energy confinement so surface perturbations no longer affected the wave propagation. Single crystal sapphire fiber features low acoustic loss, and survivability under high temperature. It is also chosen as an acoustic waveguide. AFBGs are fabricated in both waveguides. The fused quartz suspended core AFBG is shown to sense temperature up to 1000 C and to have stable reading at 700 C for 14 days. The sapphire AFBG as a temperature sensor works up to 1500 C and also provides continuous stable reading at 1100 C for 12 days. Both waveguides with AFBGs are then tested under long-term gamma radiation. Despite some fluctuations from radiation-related causes, the readings of both sensors generally remain stable. Given the experimental observations, the fused quartz AFBG waveguide and the sapphire AFBG waveguide are shown to work well in high temperature and gamma radiations. / Doctor of Philosophy / Sensing in harsh environments, like high temperature, high pressure, and corrosive environment, is always in great need. Efficient and safe operation of instruments like nuclear reactors could be better secured. Although many sensors and sensing systems are reported, such as optical fiber sensors and acoustic sensors, they all have drawbacks so new designs are constantly in need. In this dissertation, silica (a glass commonly acquired by melting sand) and sapphire (used in iphone screens due to its transparency and hardness) acoustic waveguides and sensors are developed. A periodic structure known as acoustic fiber Bragg grating (AFBG) is the core sensor structure in this dissertation. A calculation method is proposed first. Acoustic wave needs a waveguide to propagate somewhere further, and a new waveguide structure is made to keep the acoustic energy within the very center of the waveguide, so any change on the outer surface does not affect the wave inside. Also, sapphire has good acoustic property and is used. The AFBGs are fabricated in both waveguides. These sensing waveguides are shown to work at >1000 C temperature and provide stable reading for more than 10 days. Long term exposure to gamma radiation for weeks or months resulted in stable performances. Therefore, it is concluded that silica and sapphire waveguide sensors are successfully developed for high temperature and nuclear radiation applications.

Yes / Human fall detection systems play an important role in our daily life, because falls are the main obstacle for elderly people to live independently and it is also a major health concern due to aging population. Different approaches are used to develop human fall detection systems for elderly and people with special needs. The three basic approaches include some sort of wearable devices, ambient based devices or non-invasive vision-based devices using live cameras. Most of such systems are either based on wearable or ambient sensor which is very often rejected by users due to the high false alarm and difficulties in carrying them during their daily life activities. This paper proposes a fall detection system based on the height, velocity and position of the subject using depth information from Microsoft Kinect sensor. Classification of human fall from other activities of daily life is accomplished using height and velocity of the subject extracted from the depth information. Finally position of the subject is identified for fall confirmation. From the experimental results, the proposed system was able to achieve an average accuracy of 94.81% with sensitivity of 100% and specificity of 93.33%. / Partly sponsored by Center for Graduate Studies. This work is funded under the project titled “Biomechanics computational modeling using depth maps for improvement on gait analysis”. Universiti Tun Hussein Onn Malaysia for provided lab components and GPPS (Project Vot No. U462) sponsor.

Gas Sensing Has Become a Very Important and Attractive Technique Because of Its Various Applications, Such as in the Increasingly Concerning Case of Environmental Issues, Automobile Emission Detection, Natural Gas Leakage Detection, Etc. It Also Has Significant Applications in Industries, Such as Safety and Health Monitoring in Underground Mines. Among Those Sensing Areas, Fiber-optic Sensors Have Drawn Considerable Attention Because of Its Small Size, Light Weight, High Sensitivity, and Remote Sensing Capability. However, Current Fiber-optic Gas Sensing Techniques Have Several Limitations on Their Potential for Multiplexed or Distributed Sensing Due to Difficulties Such as High Complexity or Large Loss. To Accomplish the Goal for Multiplexed Gas Sensing, an Off-centered Core Fiber Design Is Investigated. The Eccentric Core Can Reduce Attenuation, Keep Mechanical Strength, and Lower Fabrication Cost. To Verify the Feasibility of the Design, Fiber Field Distribution Is First Studied in Simulation, Which Will Be Discussed in Detail in Chapter 2. Then Two Fiber Samples with a Length of 10 Cm and 40 Cm Are Prepared and Placed in a Custom Methane Sensing System for Gas Absorption Testing, Which Is Detailed in Chapter 3. From Etching Analysis, Localized Surface Defects Are Found as the Main Reason for Power Loss. Performance Such as Detection Resolution and Sensitivity Are Investigated. In Chapter 4, Theoretical Evaluations Have Been Conducted for Multiplexed Sensors Performances Using the Off-centered Core Fiber to Study the Impact Fiber Parameters on Sensing System Design. The Conclusion and Summary Are Presented in Chapter 5. / Master of Science / Gas Sensing Has Become a Very Important and Attractive Technique Because of Its Various Applications, Such as in the Increasingly Concerning Case of Environmental Issues, Automobile Emission Detection, Natural Gas Leakage Detection, Etc. It Also Has Significant Applications in Industries, Such as Safety and Health Monitoring in Underground Mines. Among Those Sensing Areas, Fiber-optic Sensors Have Drawn Considerable Attention Because of Its Small Size, Light Weight, High Sensitivity, and Remote Sensing Capability. However, Current Fiber-optic Gas Sensing Techniques Have Several Limitations on Their Potential for Long Distance Distributed Sensing Due to Difficulties Such as High Fabrication Complexity. In This Work, a Fiber-optic Gas Sensor with Special Structure Was Designed. The Sensor Can Reduce Attenuation, Keep Mechanical Strength, and Lower Fabrication Cost. To Verify the Feasibility of the Design, Theory Analysis and Simulation Were Conducted, Which Will Be Discussed in Detail in Chapter 2. Then Two Samples with a Length of 10 Cm and 40 Cm Were Prepared and Placed in a Custom Methane Sensing System for Testing. And Their Performance Such as Sensitivity Is Investigated. In Chapter 4, Theoretical Evaluations Have Been Conducted for Multiplexed Sensors Performances Evaluation to Study the Impact Fiber Parameters on Sensing System Design. The Conclusion and Summary Are Presented in Chapter 5.

Graphene is a promising material for chemical sensing applications and many studies have focused on incorporating graphene into \sgfet s sensors. The purpose of this work is to get a deeper understanding of the physics governing the surface interaction of graphene in \sgfet s with ions and charged molecules. With a clearer understanding of how these interactions register in the conductivity of graphene, it then may be possible to design the ultrasensitive sensors that are often predicted to be possible when using graphene. Epitaxial graphene (EG) and graphene produced by chemical vapor deposition (CVD) were used to fabricate \sgfet s that were tested under different ionic strength conditions and concentrations of charged proteins. To get a clearer picture of the electrostatic gating effect in ionic solutions, we analyzed our data combining two models: the electrical double layer model, which accounts for the distribution of ions inside the solution, and a ionization model that accounts for ionizable groups on the graphene surface. This gave us an insight into the influence of charged groups fixed to the surface on the gating effect which is fundamental to the performance of \sgfet s as sensors. Using our experimental data we were also able to estimate the density of charged impurities in two carrier density regimes. For high densities, we found a correlation between our estimated impurities and the surface charge that suggests that the ionizable groups act as impurities. For small carrier densities, we modeled the carriers using a self-consistent approximation (SCA). The impurities estimated from the SCA model do not seem to be related to the ionizable groups and so the origin of the conductivity for small density seems to be originated by the permanently charged impurities only. Our estimation of the charged impurities for our charged-protein adsorption experiments showed a relation between their values and the protein concentration. This shows that the proteins interact with the graphene as charged impurities. Overall, our experiments allowed us to gain a deeper understanding of the interaction of charged particles with graphene. The analysis performed in this work gives a guide for the development of graphene \sgfet s sensors by engineering the impurities at the surface to optimize the sensitivity. The design of receptors for specific sensing that do not require charged targets is possible with engineering the charge that the receptor presents to graphene when the analyte concentration changes.

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / Testing aircraft brake and tire systems often results in tire temperatures that makes the aircraft unsafe to approach (due to explosion risk) for up to 45 minutes; this complicates cost effective test execution. This paper describes work on a wireless sensor system that measures multiple tire temperatures and transmits the data to someone at a safe distance (>300 ft). The solution consists of a sensor patch adhered directly to the tire which measures the tire temperature. The patch transmits these measurements to off-tire reader/relay nodes that subsequently sends the data to a system controller and display device.

International Telemetering Conference Proceedings / October 18-21, 2004 / Town & Country Resort, San Diego, California / Sensor network applications typically require continuous monitoring of physical phenomena for extended periods of time under severe energy resource constraints. Accordingly, design considerations for sensor Media Access Control (MAC) protocols depart significantly from those of traditional wireless MAC protocols that largely ignore the energy factor. In this paper, we reexamine the design space of wireless sensor MAC protocols and modify IEEE 802.11 Distributed Coordination Function (DCF) to incorporate energy-adaptive contention mechanisms for prolonging sensor lifetime. Performance of the proposed schemes is evaluated with DCF as a baseline and results indicate the benefits of energy-aware mechanisms for sensor MAC protocols.

No description available.

Thesis (MEng)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: The assessment of dehydration is an ever elusive golden standard, even given the plethora of hydration markers that exist to date. Many literature sources acknowledge the need for a portable device that can be used as an indicative tool for hydration. This project sought to find a solution for assessing dehydration on a micro level looking for an indication of hydration by investigating the levels of water concentration in the skin and water compartments of the body using bioelectrical impedance, stratum corneum impedance and infrared spectrometry. Two studies were conducted to evaluate the efficacy of these devices: an infield study to assess the efficacy of the devices for measuring dehydration brought on by exercise in adults and an infant study where the devices where used to assess its ability to measure dehydration in infants who have succumbed to diarrhoea. The studies showed that the devices are not applicable in measuring real time hydration in exercising subjects as sweat was a perturbing factor in the measurements. The infant study provided promising results with regards to the usage of the infrared device. It is believed that these results could spur further investigation into the field of using infrared spectrometry as a dehydration marker. Dehydration still remains to be an ever elusive standard but the importance of finding a solution to quantitatively assess hydration is a field which could benefit the general population and its importance should not be underestimated. / AFRIKAANSE OPSOMMING: Die assessering van dehidrasie is steeds 'n ontwykende goue standaard selfs gegewe die oorvloed van hidrasiemerkers wat bestaan tot op datum. Baie literatuurbronne erken egter die behoefte aan 'n draagbare toestel wat as 'n hulpmiddel kan dien vir die evaluering van die vlakke van dehidrasie. Hierdie projek streef daarna om ondersoek in te stel tot die assessering van dehidrasie op 'n mikrovlak deur die waterkonsentrasies te meet in die vel en die verskeie waterkompartemente in die liggaam via die gebruik van bio-elektriese impedansie analise, stratum corneum impedansie analise en infrarooi-spektrometrie. Twee studies is gedoen om die doeltreffendheid van die toestelle te evalueer: 'n inveldstudie wat die hidrasievlakke van volwassenes meet wat ly aan dehidrasie weens oefening en 'n studie wat dehidrasie meet in neonate wat ly aan dehidrasie weens diarree. Die studies het bewyse gelewer dat die toestelle nie effektief is met betrekking tot die meet van dehidrasie in aktiewe volwassenes nie, weens die rede dat sweet 'n verstorende faktor is. Die neonate studie het belowende resultate verskaf met betrekking tot die gebruik van die infrarooi toestel. Daar word geglo dat hierdie resultate verdere ondersoek in die veld met betrekking tot infrarooi spektrometrie as 'n hidrasie merker kan motiveer. Finale bevindinge wys dat die kwantifisering van dehidrasie steeds 'n ontwykende standaard is, maar die belangrikheid van 'n moontlike oplossing sal voordelig wees vir die wêreld se volke en moet dus nie onderskat word nie.

The philosophy of research at the University of Texas – Robotics Research Group (RRG) is towards creating a foundation for an open architecture, reconfigurable intelligent machines to meet wide breadth of operational needs. An intelligent system is the one which has complete knowledge of its operating characteristics at all times (updated in real-time) and it can make on-the-fly decisions to adapt itself to the different conditions or present the best possible options to the human decision maker under specified and ranked criteria. The reality of all complex system is that they are inherently non-linear with coupled parameters. The traditional approach dealing with such systems assumes linearized models, imposing conservative bounds on the operational domain and thus limiting performance capability of the system. Recent advancements in sensor technology and availability of computational resources (embedded processing) at low cost have made real-time intelligent control feasible for complex systems. The computational intelligence envisioned in modern intelligent machines will enhance the system performance and will provide capabilities such as criteria based control, identification of incipient faults, condition based maintenance, fault tolerance, and ability to monitor performance parameters in real-time. The first step in this process is to equip a system with a comprehensive suite of sensors. These sensors will provide real-time data and awareness about both, the internal system states and the external/environmental operating conditions. The aim of this work is to establish an argument in favor of using multiple sensors in all complex electro-mechanical systems. The report discusses numerous benefits of a multi-sensor environment with suitable examples and attempts to justify its pressing need in all the existing complex mechanical systems. Case studies for a multi-sensor environment in railroad freight cars and vehicle systems are presented. Sensing requirements in freight train and vehicle systems are evaluated and suitable sensor technology and commercial sensor options are suggested for decision makers. In addition to benefits, challenges in a multi-sensor environment such as sensor noise, cabling complexities, signal processing, communication, data validation and data management, sensor fusion, information integration, maintenance etc. are addressed and best practices to alleviate these complexities are discussed in the report. This effort lays out a foundation for developing a multi-sensor system and will enable computational intelligence and structured decision making in the system. / text